Built in security domains are missing on windows after installing wtk

hi,
i am just experimenting a bit with j2me technologies so i have installed the latest wtk on my windows machine from sun. but a problem has raised with built-in security domains.
if i run emulator.exe -Xquery with my Windows user then the security domains lines are empty.
example: DefaultColorPhone.security.domains:
in case i launch this with Administrator it works fine
example: DefaultColorPhone.security.domains: manufacturer,minimum,identified_third_party,unidentified_third_party,maximum
everything else (environment etc.) is the same but the user account. my user name is in the form of firstname.lastname so in my opinion this won't be a whitespace issue. i have also tried uninstalling the wtk then installing with my user but it did not help.
do you have any clue what could go wrong?

Ron Apra wrote:
I installed Leopard on a G5 tower with 2 new 750 GB's seagate drives. Disk Utility shows a total capacity of 698.6 GB's out of 750 GB's so I am missing 50 GB's. Also first aide hangs up on Verify/repair disk permissions. It looks like I am dealing with an "erase" issue since their must be other files on the new drives that are causing problems, My new thoughts on this are:
(1)For MacHD 2, in DU click on the "hard Drive(698.6 GB ST3750640AS)/security option-zero out data/erase
(2) For MacHD 1 (Leopard) insert the installation disk/go to option-erase and install/ok
Will this work or is there a better way to go about it.
Thanks for looking at my Post
Ron
Most drives are listed as unformatted size and take advantage of the "1000" kilo which is really 1024.
Also a system with folders, &c. takes up space with no actual files.
Your "loss" of less than 10% is normal and expected.
For example, the "250GB" HD on this MBP as reported by DU says:
Total Capacity : 232.9 GB (250,059,350,016 Bytes)
But I have not lost 17GB.
Since your drive is 3 times the size of mine, I would expect to see a "loss" of 51 GB (3x17) which is exactly what you are reporting.

Similar Messages

I have an older iPod (2005). After years of inactivity I tried to install the cd on my PC. I get the following error message, after several attempts to install: iTunes cannot run because some of its required files are missing. Please re install iTunes.

I have an older iPod (2005). After years of inactivity I tried to install the cd on my PC. I get the following error message, after several attempts to install: iTunes cannot run because some of its required files are missing. Please re install iTunes.

Did you follow the exact instructions in this Apple support document to remove and re-install iTunes and ALL other Apple software on your XP machine?
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
B-rock

Will effect software to be erase in windows after install Leopard?

Any idea will effect those software are installed will be erased in windows section? like have to reinstall back all the software again or reformat the windows after installed the Leopard? Please advise if somebody know about it. Thank you in advance.

Installing Mac OS X 10.5 will not erase the Windows partition or anything on it; only using the Disk Utility to erase the partition or repartition the drive will.
(26114)

I just bought a 15" macbook pro, do the cds that come with the mac have the drivers i need to update windows after installing windows using boot camp?

I just bought a 15" macbook pro, do the cds that come with the mac have the drivers i need to update windows after installing windows using boot camp?

What DVDs are this ?
If it is OSX Snow Leopard Installation DVD then yes this disc contains the BootCamp Drivers version 3.x and is needed after the installation of Windows to install the BootCamp Drivers.
With OSX Lion BootCamp is at version 4.x and the BootCamp Drivers have to be downloaded during use of the BootCamp Assistant in OSX.
Boot Camp 3.0, Mac OS X 10.6 FAQ
Frequently asked questions about Lion and Boot Camp 4.0
Stefan

Missing file system after installing in SSD

Missing file system after installing in SSD MacBook
Hi All
I recently installed a SSD drive in my Macbook, I used the Disk Utility to clone the old HDD.
When i reboot the machine with the new disk I get the image of a folder with question mark.
If i reboot the machine again and hold the alt key at the chime I can see two disks.
One called SSD and another called Recovery.
if i choose the SSD the OS starts as normal and if i choose the recovery option and check the disk with disk utility
it tells me that everything is fine.
Any ideas how i can make the machine boot as it should without having to hold down the alt key a start up??

Hi i tried this and just got the big symbol of doom at start up.
However, a little terminal witchcraft did the trick!
sudo bless -mount /Volumes/"Macintosh HD" -setBoot

Multimedia Audio Controller, and Video Controller(VGA compatible) are missing on Windows XP(32Bit) SP3

Hi.
My Desktop Computer(Intel P 4, 512MB of RAM, and Graphics Card with 256MB of RAM)
Also, My Desktop Computer with P 4 doesn't have any access internet since there is no network adapter is installed. As a result, I would not be able to run the pc scan utility, or Reader a web-based applet that identifies my GPU or Audio controller
and finds the latest graphics driver for my GPU, and Audio.
I have two Windows XP installations:
Windows XP SP2(32Bit) which is old and it seems it infected by some viruses.
I have installed another fresh clean Windows XP(32Bit) SP3. However, I have two devices not detected well by Windows XP.
First of all, when saying that I have multi-operationgs systems, I mean there are two operating systems installed on my PC(SP2, SP3) both are 32Bit. The first Windows SP2(NOT installed by me) has all multimedia audio card installed well,
and has SCSI and RAID Host Controller shown the device manager. However, only the VGA is not installed on Windows SP2. However, the second one Windows SP3(Installed by me) has VGA not installed, Multimedia audio NOT installed, and there is no SCSI and RAID
Host Controller in device manager.
First: Yes, my motherboard has integrated video, and integrated audio card
According to the screen shots above, then
The vendor ID of Multimedia Audio Controller is 8086 and the device ID is
24D5.
The vendor ID of Video Controller is 8086 and the device ID is
2572.
I AM EXPECTING THAT KNOWING THE VENDOR ID AND THE DEVICE ID WILL LET ME QUICKLY FIND THE APPROPRIATE DRIVER. HOWEVER, I COULDN'T FIND THE APPROPRIATE DRIVER.
Thus, could you please help me to find them?
I have tried installing a soundMAX card driver, however, I found this error.
I have checked the other Windows XP SP2(32Bit) which is oder installed, and it seems it infected by some viruses.
However, the Multimedia Audio on that Windows is installed well. As here: I only posted these screen shots to show what kind of device is Multimedia Audio Card
The motherboard model is:
Belarc Advisor Computer Profile
Operating
System
System
Model
Windows XP Professional
Service Pack 3 (build 2600)
Install Language: English (United
States)
System Locale: Arabic (Yemen)
Installed: 22/03/2013 12:03:16
ص
Boot Mode: BIOS (Secure
Boot not supported)
Enclosure Type:
Desktop
Processor
a
Main Circuit Board
b
3.00 gigahertz Intel Pentium
4
16 kilobyte primary memory cache
1024 kilobyte secondary memory
cache
64-bit ready
Hyper-threaded (2 total)
Board: 775i65G.
Bus
Clock: 200 megahertz
BIOS: American Megatrends Inc. P3.00
03/20/2007
Drives
Memory Modules
c,d
39.99 Gigabytes
Usable Hard Drive Capacity
29.48 Gigabytes Hard Drive Free
Space
COMPAQ CD-ROM LTN486S [Optical drive]
3.5" format removeable
media [Floppy drive]
WDC WD400BB-75DEA0 [Hard drive] (40.00 GB) -- drive
0, rev 05.03E05, SMART Status:
Healthy
504 Megabytes Usable
Installed Memory
Slot 'DIMM0' has 512 MB
Slot 'DIMM1' is
Empty
Local Drive
Volumes
c: (NTFS on drive 0) *
20.98 GB
14.16 GB free
d: (NTFS on drive 0)
19.01 GB
15.33 GB free
<center>
* Operating System is installed on
c:
</center>
Network
Drives
None
discovered
Users
(mouse over user name for details)
Printers
local user
accounts
last logon
عايض
لرضي
19/01/2015 10:59:17 م
(admin)
local system
accounts
Administrator
never
(admin)
Guest
never
HelpAssistant
never
SUPPORT_388945a0
never
<center>Marks
a disabled account; Marks
a locked account </center>
Controllers
Display
Standard floppy disk
controller
Intel(R) 82801EB Ultra ATA Storage Controllers
Primary IDE
Channel [Controller]
Secondary IDE Channel [Controller]
None
discovered
Bus
Adapters
Multimedia
Intel(R) 82801EB USB
Universal Host Controller - 24D2
Intel(R) 82801EB USB Universal Host
Controller - 24D4
Intel(R) 82801EB USB Universal Host Controller -
24D7
Intel(R) 82801EB USB Universal Host Controller - 24DE
Intel(R)
82801EB USB2 Enhanced Host Controller - 24DD
None
discovered
Virus
Protection [Back to Top]
Group
Policies
Norton AntiVirus Version 18.1.0.37
 Virus Definitions Version Not Up To Date
 Realtime File Scanning
On
None
discovered
Communications
Other
Devices
↓ Realtek RTL8139 Family PCI Fast
Ethernet NIC
Status:
Cable unplugged
Dhcp Server:
none responded
Physical Address:
00:19:66:1F:F7:54
USB Human Interface
Device
Standard 101/102-Key or Microsoft Natural PS/2
Keyboard
HID-compliant mouse
USB Root Hub (5x)
USB Storage Use in past 30 Days(mouse
over last used for details)
Hosted Virtual Machines (mouse over
name for details)
Last
Used
SanDisk Cruzer Blade, s/n
4C532000020502112303, rev 2.01
19/01/2015
09:32:57 م*
USB 2.0 USB Flash Drive, s/n
59309e92e21612, rev 0.00
09/01/2015
12:29:17 ص*
<center>* Possibly used again before the reboot following this
time.</center>
None
discovered
See your entire
network map...
click for Belarc's System Management products
A man should convert his anger and sadness into strength to continue living in this life.

Dont worry, dont think anyone was as a matter of fact
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=908&jump= true#M908
http://support.microsoft.com/default.aspx?scid=kb;en-us;80509
http://support.microsoft.com/default.aspx?scid=kb;en-us;84567
that worked for me, maybe it will help someone else that went through what i did, its a miracle i did not top myself after going through all this BS. ALSO dont threaten your computer with violence, cos it will always call your bluff which makes things worse

Default OS performance counters processor, memory, logincal disk are missing in windows 2008 standard server

I have a windows 2008 standard server in which the default OS performance counters counters processor, memory, logincal disk are missing.
I tried using exctrlst.exe tool. This tool shows that the respective performance counters are already enabled but when I check in perfmon.msc, these counters are not visible.
I also tried to rebuild the performance counters from the OS disk. but it did not worked. still the counters are missing.
Because of these counters are missing, am unable to monitor the utilization of CPU, memory and disks.
any suggestions, workaround, recommendations or solutions. it will be more helpful and highly appreciated !!!!.
Regards,
GK.
GK

Hi GK,
According to your description, it seems that the issue was the same as the one described in the article below. If you are running Windows Server 2008 64-bit, you can check the KB below:
http://support.microsoft.com/en-us/kb/2554336
In addition, the articles below would also be helpful to you:
How to manually rebuild Performance Counter Library values
Missing Performance Counters
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

When connecting to Itunes, it shows the following error: registry settings used by itunes drivers for importing and burning cds are missing. I have installed the gear drivers, uninstalled and installed itunes still showing same error. Anything else?

When connecting to Itunes, it shows the following error: registry settings used by itunes drivers for importing and burning cds are missing.
I have edited the registery, downloaded the Gear drivers, uninstalled and installed itunes, and the error still appears.
What else can I do. Cannot connect any of our iphones or ipods to itunes because of this error.

I have edited the registery,
We'd better have a closer look at the keys to see what's going on.
Can you post a screenshot of the contents of the key you've been editing, please? Include all of the regedit screen, including the left-hand column. Save the screenshot to an image file, and insert the image file in a reply by clicking the wee camera icon at the top of the reply window.

Mac Pro missing "Create Windows 7 Install Disk"

Okay well when i try to use bootcamp as i already bought a copy of windows 7. The Create Windows 7 Install Disk option is not there for me. In every tutorial to setup bootcamp has had that option. Is my bootcamp messed up or did i do something wron? Specs: 2 x 2.4 GHz Quad-Core Intel Xeon 6GB 1066Mhz OS X 10.8.2 Thanks

Your Mac Pro must be newer than a Mac Pro 5,1, and must have a minimum ROM version in order to use the USB installer you are looking for. If your machine is older, or doesn't have the correct ROM versions, then you need to use the "old fashioned" disc install method....

ALV Layouts are missing in ECC6 after upgrade

Dear Friends,
we have an issue of missing ALV Layouts in ECC6 after upgrade of ECC6 from 4.7 version
For example, we have a custom table ZRCILOT, data displayed using tocde se16, but when we check layout are missing in ECC6 but the same exist in 4.7 version.
please check the attached screen-shots.
kindly suggest, is there any possibility to retrive it.
Thanks,
Munvar Basha.

Hello
Variants should be preserved by the upgrade...
You could export/import layout using the report from the here under note
Regards
551178 - FAQ ALV Layout
During the upgrade of or when importing Support Packages?
Answer: Layouts created by the customer are retained and you can continue to use them.
643330 - ALV layout: Importing and exporting layouts

Skype contacts are missing ... after not logging i...

hi...
my skype contacts are missing but what is more wierd is that when i search for my friends through the search function...they are all offline... meanwhile im online and they are online but we see both me offline..
plz help thanks

Hi!
please visit the link below for suggestions;
How to Recover Lost Contact List
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

BeatsAudio missing/replaced after Installing Windows 8.1

Hi,
When I bought my laptop (HP Pavilion 15-p044tu) it had Windows 7 installed. Also, BeatsAudio controler installed. Then I installed Windows 8.1 64bit (clean install, not upgrade from 7) and it required a full format of my HDD. So all the drives got erased including the one which had Driver & OS Backup stored.
After Installing win8.1, I went to HP support page for my laptop and manually downloaded the drivers (Including Audio drivers) from there. Please note that, some of the drivers were installed automatically by windows and there is no "unkown device" showing in my device manager's "other devices" tree.
The problem I'm facing is that there is no BeatsAudio interface anywhere. It's been replaced by "Realtek HD audio". Even in the control panel where there was a Beats Icon, there is a realtek icon now. I've searched other forums where they've suggested installing IDT audio driver which will bring back Beats but there is no such driver on my laptop driver page. I've tried the windows 7 drivers but got no positive result. Also I've tried installing IDT drivers from different laptop models from different windows version but it says, "Hardware detected is not supported by this IDT Audio Driver" & stops installation process.
I've also tried installing it in safe mode, but got same result. Note that my audio is working as normal with realtek, but the soun is lower than before. I just need the beats audio back.
Please help me out with this issue. I've searched your forum but didn't get any solution (just different IDT drivers which resulted the same thing).
Waiting for a reply.
Thanks.
This question was solved.
View Solution.

Hi,
The beats audio interface is provided by the audio software installer - this can be IDT or Realtek depending on the hardware.
Try the following.
Download the Realtek Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66107.exe
When done, hold down the Windows key and press R. Into the Run window type devmgmt.msc and hit enter.
Expand Sound, Video and Game Controllers. Right click the Realtek device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, download and reinstall the Chipset driver on the following link.
http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66094.exe
When the reinstallation has completed, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Let Windows fully load - it may automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the Realtek Audio installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again and let Windows fully load for a couple of minutes before trying to launch the Beats interface from Windows control panel.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Startup error message while starting up Windows after installing NI Circuit Design Suite 10

Hi.
I recentely acquired NI Circuit Design Suite Student Edition v10.
After installing it on my computer I began receiving the following error message everytime I booted up Windows.
Faulting application nidmsrv.exe, version 4.7.1.8, faulting module unknown, version 0.0.0.0, fault address 0x007fc66f.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I checked the Windows logs and found other error messages when the system booted:
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1000
Date:  12-01-2008
Time:  13:17:54
User:  N/A
Computer: THINKPADT30
Description:
Faulting application nidmsrv.exe, version 4.7.1.8, faulting module unknown, version 0.0.0.0, fault address 0x007fc66f.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 6e 69 64   ure nid
0018: 6d 73 72 76 2e 65 78 65   msrv.exe
0020: 20 34 2e 37 2e 31 2e 38    4.7.1.8
0028: 20 69 6e 20 75 6e 6b 6e    in unkn
0030: 6f 77 6e 20 30 2e 30 2e   own 0.0.
0038: 30 2e 30 20 61 74 20 6f   0.0 at o
0040: 66 66 73 65 74 20 30 30   ffset 00
0048: 37 66 63 36 36 66         7fc66f
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1004
Date:  12-01-2008
Time:  13:18:51
User:  N/A
Computer: THINKPADT30
Description:
Faulting application nidmsrv.exe, version 4.7.1.8, faulting module unknown, version 0.0.0.0, fault address 0x007fc66f.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 6e 69 64   ure nid
0018: 6d 73 72 76 2e 65 78 65   msrv.exe
0020: 20 34 2e 37 2e 31 2e 38    4.7.1.8
0028: 20 69 6e 20 75 6e 6b 6e    in unkn
0030: 6f 77 6e 20 30 2e 30 2e   own 0.0.
0038: 30 2e 30 20 61 74 20 6f   0.0 at o
0040: 66 66 73 65 74 20 30 30   ffset 00
0048: 37 66 63 36 36 66         7fc66f
Event Type: Error
Event Source: Application Error
Event Category: None
Event ID: 1001
Date:  12-01-2008
Time:  13:21:33
User:  N/A
Computer: THINKPADT30
Description:
Fault bucket 619997672.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 42 75 63 6b 65 74 3a 20   Bucket:
0008: 36 31 39 39 39 37 36 37   61999767
0010: 32 0d 0a                  2..
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7034
Date:  12-01-2008
Time:  13:18:12
User:  N/A
Computer: THINKPADT30
Description:
The National Instruments Domain Service service terminated unexpectedly. It has done this 1 time(s).
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I checked the forums at NI and found a similar problem with a computer with Windows Vista installed. I have Windows XP Professional installed on the computer, but tried the update through the self updating feature of the NI software.
After the update the problem remains exactly the same.
To find out more about the error, I checked several Windows properties to identify the cause of the problem. One thing I found was on the Services control, under Administrative Tools. After the error message during boot, the services window shows up 2 services whose status is "Stopping" and the startup type is "Automatic". This services are:
Lookout Citadel Driver
National Instruments Time Sincronization
I'm using an IBM ThinkPad T30 (Type 2366-BG1) with Windows XP Professional with 768Mb of memory, 80GB HDD.
Can anyone give me some hints on this matter?
Thank you in advance.

Good morning.
I tried the steps suggested but the problem remained. I then decided to try some aditional steps and apparently the problem is solved. I describe the steps I took bellow.
The problem was related to my antivirus / firewall solution, Panda Antivirus + Antispyware 2007.
1. I changed the previously mentioned Windows services startup to "Manual" instead of "Automatic".
2. Rebooted the computer.
3. Opened the services control in Administrative Tools.
4. Selected the first service "Citadel..." and pressed the "Start" button.
5. After a few seconds, the firewall solution presented a window stating that the program was attempting to access the internet (or my LAN). I selected "Always allow".
6. I repeated this step for all the others NI services. Some produced the same feedback, others didn't.
7. Changed the startup type of the services to the values I had written down before.
8. Rebooted the computer and everything worked fine.
It seems my firewall solution is unable to cope with a program trying to access the Internet (or network) before a user logs in.
Thank you for your support.
Best regards,
Alexandre Ventura
Message Edited by AlexandreV on 01-25-2008 04:56 AM

All of my pictures are gone from iPhoto after installing Yosemite..how do i get them back?

I have tried everything to get my pictures back after installing Yosemite on my laptop. Are they gone? Or is there a way to retrieve them?

Define "everything" because if you've tried everything then your last recourse is:
1 - restore your backup copy of your iPhoto Library created just prior to your Yosemite upgrade or
2 - Starting over from scratch with new library
Start over with a new library and import the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from your original library as follows:
1. Open the library package like this.
2. Launch iPhoto with the Option key held down and, when asked, select the option to create a new library.
3. Drag the subfolders of the Originals (iPhoto 09 and earlier) or the Masters (iPhoto 11) folder from the open iPhoto Library package into the open iPhoto window a few at a time.
This will create a new library with the same Events (but not necessarily the same Event names) as the original library but will not keep the metadata, albums, books slideshows and other projects.
Note: your current library will be left untouched for further attempts at a fix if so desired.

Are there any issues after installing AT&T's free McAfee?

Since installing it on my Mac Pro laptop with Maverick installed, I've been getting unrecognizable app names icons.

Antivirus tools can and variously do cause problems, yes.
One of the typical first steps for troubleshooting weird errors is the removal of the antivirus tools.
Here, I'd remove McAfee per the documented procedures, reboot, and test again.
If I wished to secure the OS X system, I would install ClickToPlugin in Safari, would disable Oracle Java in Safari and any other web browsers or would simply remove or not install Oracle Java, and would remove Adobe Flash Player, and would also disable opening "safe" file extensions within Safari. (I generally don't install antivirus tools on OS X systems, but then administrative access is also restricted.)
FWIW — if you're downloading kits for various tools — please go to the author's own download site for the particular package. Avoid downloading tools from pop-ups or freebies or the rest — don't download anything from any other sites. Go directly to the author's distribution site. I mention this here as unfortunately some of the major download aggregators are now adding toolbars and other baggage, and those add-ons can cause weirdnesses.

Built in security domains are missing on windows after installing wtk

Similar Messages

Maybe you are looking for