Built it!! Now, some more questions . . .

I put my new computer together this evening:
K8N Neo Platinum
2 x 512 Crucial PC3200 RAM
120 GB WD SATA hard drive
Lite-on CD-RW
Floppy by Sony
Antec Performance Plus 1080 AMG case with 430W Antec TruePower supply
(includes 2 power supply fans, 2 rear case fans, one side blowhole case fan)
An added Vantec Stealth fan in the front of the case
NEC 19" monitor
When I booted up (and boy was I happy it booted up) and went into BIOS setup, I noticed there were certain choices that were depicted in the manual but which I didn't have in my BIOS: IDE Block Mode, and Gigabyte LAN. What's the deal with the missing Gigabyte LAN? It's an advertised feature of the board - shouldn't it be there?
I also noticed that when I rebooted the computer after deactivating the full-screen logo, I saw that the hard drive (on SATA 1) was detected as IDE Third Master. (The CDRW is on the Primary IDE controller and is detected as such.) Is that how it's supposed to work?
Also, when installing WinXP, the setup program offered to configure the network settings. It detected a "1394 Network Device" -- is that correct? When I see 1394, I think Firewire, not Ethernet.
Haven't yet had a chance to install the nVidia drivers/software, or the AMD processor driver, or any apps, or even do any benchmarks, but I can't wait to do all those things.

Thanks for responding so quickly, guys.
I disabled the 1394 network interface in Device Manager, and am using the nVidia network device for my LAN and internet connection -- in fact, I'm writing this on the new PC.
It's rather faster than my old one, which was an 850 MHz PIII.
According to CoreCenter, the CPU temp is 50C and the System Temp is 30C.
So far, I am very pleased.
One odd thing, though, not hardware related -- I installed Windows XP, and the normal desktop icons (like My Computer and Network Neighborhood) aren't there!

Similar Messages

I have some more question

I have some more question.How can I create web.xml and check it.And
how can check the URL patten.thanks

write a simple Test servlet,compile it and place it in your WEB-INF\classes of your application context.configure this servlet class in your web.xml and access it thru your browser to test it all
Regards
padmanava

Some More questions...

Hey,
I am still asking questions about Mac to be really sure about my purchase!
Do MacBook run very hot? I was reading some reviews, and it was written that they run hot even on light applications..what about MacPro, do they have the same heat problem?!
About the video card...I read that the one put on the MacBook is pretty bad..how bad is it?!
Thank You all!

Last year when the MacBook came out there were lots of discussions about the heat issue. We all traded our running temperatures and tips about lap desks and fan programs and there was a great deal of angst about the whole issue. That's all died down.
I think it all boils down to this: the MacBook does run hotter than the G3 and G4 iBooks (which many of us had traded up from) and due to its slimness if feels hotter than a lot of thicker PC notebooks. But there is no heat problem. I'm sitting on my back deck with the MacBook sitting on my lap - actually on my bare legs - and I feel quite comfortable. Running my normal suite of programs (mail, Safari, NewNewsWire, Yojimbo, and an assorted number of utilities) my Mac's temp is hovering around 58-60C. When I run more intensive programs (Parallels Desktop for example) the fans kick in and the temp may ramp up 5 degrees more. The same is true for the MBP. Also, there's a nifty freeware program called SMCFanControl to over-ride Apple's default initial fan speed.
From day one the MacBook has gotten a bad rap over Apple's decision to use Intel's integrated video. The myth is this makes the MacBook useless for anything but light word processing and web surfing. That it cannot run graphics programs or games and that any serious user should buy a MBP. The reality is quite different. I'm using my MacBook to do professional desktop publishing and Adobe CS3 products run quite nicely on it. I've been playing WOW and a host of casual games. Were I a serious gamer would I use the MB? No. And I wouldn't use the MBP either - or any notebook for that matter. Unless you intend to play hardcore games or do serious 3D graphics work the MB will do you just fine.

Answer some more questions on Basic ABAP?

hi all
    Answer the Following,
1)at wch loop "ABC' will be printed.
loop at itab.
do 8 times.
write : ' '.
enddo.
skip.
write : 'ABC'.
endloop.
a)8
b)9
c)10
d)1
2)to sort itab which of the following field will help(more than 1 answer id correct)
data : begin of itab,
        a) field(10) type p,
        b) field(10) type c,
        c) field(10) type n,
        d) field(10) type x,
          end of itab,
3)which SQL stmt does not LOCK the corresponding DB entries?
a)select single *
b)insert
c)select single update
d)modify
4)data : fielda(10) value 'ABCD'.
if fielda CO 'ABCD'.
what is the value of sy-fdpos.
a)0
b)ABCD
c)A
d)1
5) to delete the contents of itab(with header line)
a)clear itab
b)clear itab[]
c)refresh itab
d)refresh itab[]
6)what will be the value of F1 after submiting
program abc.
data :F1.
F1 = ' '.
perform out.
submit abc1 using F1 exporting list to memory id 'xyz'.
program abc1.
form out.
data : F1.
F1 = '1'.
endform.
a)space
b)1
c)run time error
d)0
reward points will be given for all correct answers....!!

Hi,
1)at wch loop "ABC' will be printed. - d)1.
2)to sort itab which of the following field will help - c) field(10) type n.
3)which SQL stmt does not LOCK the corresponding DB entries - a)select single *
4)data : fielda(10) value 'ABCD'.if fielda CO 'ABCD'.what is the value of sy-fdpos. 4
5)to delete the contents of itab(with header line) - refresh itab.
Regards,
Priyanka.

I have some more questions before I buy...

What type of video file(s) do iPods recognize?
Has anyone heard of ipod-movies.net, and do you know if it works well?
White or black?
iPod Windows XP

Please do not bump your threads... especially only 40 minutes after you've posted.
What type of video file(s) do iPods recognize?
H.264 video: up to 768 Kbps, 320 x 240, 30 frames per sec., Baseline Profile up to Level 1.3 with AAC-LC up to 160 Kbps, 48 Khz, stereo audio in .m4v, .mp4 and .mov file formats
MPEG-4 video: up to 2.5 mbps, 480 x 480, 30 frames per sec., Simple Profile with AAC-LC up to 160 Kbps, 48 Khz, stereo audio in .m4v, .mp4 and .mov file formats
Has anyone heard of ipod-movies.net, and do you know if it works well?
Never used it. Looks very sketchy to me.
"Download Virtually any Movie, TV Show, Song, or Music Video for FREE with a few clicks of your mouse and transfer these to your iPod with ease."
If any of those files are copyrighted material... then this site is providing an illegal file sharing service.
White or black?
Your iPod, your decision.

HT3406 Using iphone 4 from verizon as iPod? some more questions

Hi,
I have a current iPhone 4 which is active with iTunes. After I upgrade to iPhone 6, I want to use the current one as iPod. Is there anything I need to do? It is a Verizon iPhone. Is there any tips to conserve battery after using it as iPod?
I have wifi all setup, nothing will change.
Thank You

I use my old IPhone 2G in a XtremeMac Tango like an iPod. . I take off the SIM card. That's all.
Best,

I love Apple and I use all product. iPhone 3,3s,4,4s,5, iPad and Mac Air(now no more 3,3s and 4)... Only one thing I want to know is... What can I do if some one spy on my phone? How do I protect all my stuff that I put in my phone?

I love Apple and I use all product. iPhone 3,3s,4,4s,5, iPad and Mac Air(now no more 3,3s and 4)... Only one thing I want to know is... What can I do if some one spy on my phone? How do I protect all my stuff that I put in my phone?

the only way that anyone would be able to see anything at all on your phone is if they knew your apple id password, or they were looking over your shoulder
if you are concerned that someone may know your apple id password, please change it at appleid.apple.com

I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM... I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM? Is there any way to get more VRAM to play games on steam?

I have a Macbook Pro june 2011... I have 8GB ram but I only have 256mb VRAM...
I've read some other questions about this and I realized... Why do I not have 560mb of VRAM since I have 8GB of RAM?
Is there any way to get more VRAM to play games on steam?
I've learned by reading other topics that I can't upgrade my graphics card on my Macbook Pro because it's soldered into the motherboard or somthing like that, but please tell me if there is any way to get more video ram by chaning some setting or upgrading something else. I'd also like to know why I only have 256MB of VRAM when I have 8GB of RAM, since I have 8GB of RAM I thought I was supposed to have 560mb of VRAM...
So the two questions are...
Is there any way to upgrade my VRAM, so that I can play games on steam?
Why do I only have 256MB VRAM when I have 8GB total RAM?
Other Info:
I have a quad core i7 Processor.
My graphcics card is the AMD Radeon HD 6490M.
I am also trying to play games on my BOOTCAMPed side of my mac, or my Windows 7 Professional side.
THANK YOU SO MUCH IF YOU CAN REPLY,
Dylan

The only two items that a user can change on a MBP are the RAM and HDD (Retinas not included). You have what the unit came with and the only way you will be able to change that is to purchase a MBP with superior graphics
If you are very much into gaming, the I suggest A PC. They are far superior for that type of application to a MBP.
Ciao.

I worked with files in LR that were originally on my C drive, then were moved to an external HD for storage. I now want to do some more work on those files (which have the same file name as on the C drive). I plugged the drive into my computer and it show

I worked with files in LR that were originally on my C drive, then were moved to an external HD for storage. I now want to do some more work on those files (which have the same file name as on the C drive). I plugged the drive into my computer and it shows in LR under folders as the F drive and the little green light is on, but LR is showing only the first 6 files and not the remaining 200 or so. How do I expand the F folder to expose all files?

I worked with files in LR that were originally on my C drive, then were moved to an external HD for storage. I now want to do some more work on those files (which have the same file name as on the C drive). I plugged the drive into my computer and it shows in LR under folders as the F drive and the little green light is on, but LR is showing only the first 6 files and not the remaining 200 or so. How do I expand the F folder to expose all files?

I have some problem when I want to download app in iTunes some security question ask me about my visa when I right my visa number I got an errors and on top of the page told me go to iTunes support I do these things and now what should I do

I have some problem when I want to download app in iTunes some security question ask me about my visa when I right my visa number I got an errors and on top of the page told me go to iTunes support I do these things and now what should I do

Most of the people on these forums, including myself, are fellow users - you're not talking to iTunes Support here.
You can contact iTunes Support via this link : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

TS1424 security questions i do not know the answer to then please send me one some more please david adams

security questions i do not know the answer to then please send me one some more please david adams

Please be aware that you are not communicating with Apple when you post in these forums. The only people who will reply to your posts are your fellow users.
As to your issue, go to:
https://appleid.apple.com/
If you've forgotten your answers, there should be a link just under the security questions fields where you can have a reset email sent to your Rescue email address. If the link for the email doesn't appear, as can happen if you didn't set a rescue email address or (apparently) have a .Mac email address, go here:
http://www.apple.com/emea/support/itunes/contact.html
to report the issue to the iTunes Store.
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

I placed the order for iphone 4s on 21st august 2012. it got cancelled on 23rd august 2012 but till now i havent got any refund from apple. is that normal or i shud take some more actions?

i placed the order for iphone 4s on 21st august 2012. it got cancelled on 23rd august 2012 but till now i havent got any refund from apple. is that normal or i shud take some more actions?

http://store.apple.com/us/help/returns_refund

I need some more interview question with answer on modeling,reporting.

i need some more interview question with answer on modeling,reporting.

Hi,
You may find tons of topic about interview question. Please try to search forums before opening a post next time.Take a look at the link below.
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=bwinterviewquestions&adv=true&adv_sdn_all_sdn_author_name=
Regards,
®

HT6154 I bought iCloud storage a few months ago and now I want to buy some more, how do I know when I purchased the first one?

I bought iCloud storage a few months ago and now I want to buy some more, how do I know when I purchased the first one?

Read here:
http://support.apple.com/kb/HT4874
What happens is your existing plan gets canceled, & you're charged a pro-rated amount.

ColdFusion 11: custom serialisers. More questions than answers

G'day:
I am reposting this from my blog ("ColdFusion 11: custom serialisers. More questions than answers") at the suggestion of Adobe support:
@dacCfml @ColdFusion Can you post your queries at http://t.co/8UF4uCajTC for all cfclient and mobile queries.— Anit Kumar Panda (@anitkumar85) April 29, 2014
This particular question is not regarding <cfclient>, hence posting it on the regular forum, not on the mobile-specific one as Anit suggested. I have edited this in places to remove language that will be deemed inappropriate by the censors here. Changes I have made are in [square brackets]. The forums software here has broken some of the styling, but so be it.
G'day:
I've been wanting to write an article about the new custom serialiser one can have in ColdFusion 11, but having looked at it I have more questions than I have answers, so I have put it off. But, equally, I have no place to ask the questions, so I'm stymied. So I figured I'd write an article covering my initial questions. Maybe someone can answer then.
ColdFusion 11 has added the notion of a custom serialiser a website can have (docs: "Support for pluggable serializer and deserializer"). The idea is that whilst Adobe can dictate the serialisation rules for its own data types, it cannot sensibly infer how a CFC instance might get serialised: as each CFC represents a different data "schema", there is no "one size fits all" approach to handling it. So this is where the custom serialiser comes in. Kind of. If it wasn't a bit rubbish. Here's my exploration thusfar.
One can specify a custom serialiser by adding a setting to Application.cfc:
component { this.name = "serialiser01"; this.customSerializer="Serialiser"; }
In this case the value - Serialiser - is the name of a CFC, eg:
// Serialiser.cfccomponent { public function canSerialize(){ logArgs(args=arguments, from=getFunctionCalledName()); return true; } public function canDeserialize(){ logArgs(args=arguments, from=getFunctionCalledName()); return true; } public function serialize(){ logArgs(args=arguments, from=getFunctionCalledName()); return "SERIALISED"; } public function deserialize(){ logArgs(args=arguments, from=getFunctionCalledName()); return "DESERIALISED"; } private function logArgs(required struct args, required string from){ var dumpFile = getDirectoryFromPath(getCurrentTemplatePath()) & "dump_#from#.html"; if (fileExists(dumpFile)){ fileDelete(dumpFile); } writeDump(var=args, label=from, output=dumpFile, format="html"); } }
This CFC needs to implement four methods:
canSerialize() - indicates whether something can be serialised by the serialiser;
canDeserialize() - indicates whether something can be deserialised by the serialiser;
serialize() - the function used to serialise something
deserialize() - the function used to deserialise something
I'm being purposely vague on those functions for a reason. I'll get to that.
The first [issue] in the implementation here is that for the custom serialisation to work, all four of those methods must be implemented in the serisalisation CFC. So common sense would dictate that a way to enforce that would be to require the CFC to implement an interface. That's what interfaces are for. Now I know people will argue the merit of having interfaces in CFML, but I don't really give a [monkey's] about that: CFML has interfaces, and this is what they're for. So when one specifies the serialiser in Application.cfc and it doesn't fulfil the interface requirement, it should error. Right then. When one specifies the inappropriate tool for the job. What instead happens is if the functions are omitted, one will get erratic behaviour in the application, through to outright errors when ColdFusion goes to call the functions and cannot find it. EG: if I have canSerialize() but no serialize() method, CF will error when it comes to serialise something:
JSON serialization failure: Unable to serialize to JSON.
Reason : The method serialize was not found in component C:/wwwroot/scribble/shared/git/blogExamples/coldfusion/CF11/customerserialiser/Serialiser .cfc.
The error occurred inC:/wwwroot/scribble/shared/git/blogExamples/coldfusion/CF11/customerserialiser/testBasic.c fm: line 4
2 : o = new Basic();
3 :
4 : serialised = serializeJson(o);5 : writeDump([serialised]);
6 :
Note that the error comes when I go to serialise something, not when ColdFusion is told about the serialiser in the first place. This is just lazy/thoughtless implementation on the part of Adobe. It invites bugs, and is just sloppy.
The second [issue] follows immediately on from this.
Given my sample serialiser above, I then run this test code to examine some stuff:
o = new Basic(); serialised = serializeJson(o); writeDump([serialised]); deserialised = deserializeJson(serialised); writeDump([deserialised]);
So all I'm doing is using (de)serializeJson() as a baseline to see how the functions work. here's Basic.cfc, btw:
component { }
And the test output:
array
1
SERIALISED
array
1
DESERIALISED
This is as one would expect. OK, so that "works". But now... you'll've noted I am logging the arguments each of the serialisation methods receives, as I got.
Here's the arguments passed to canSerialize():
canSerialize - struct
1
XML
My reaction to that is: "[WTH]?" Why is canSerialize() being passed the string "XML" when I'm trying to serialise an object of type Basic.cfc?
Here's the docs for canSerialize() (from the page I linked to earlier):
CanSerialize - Returns a boolean value and takes the "Accept Type" of the request as the argument. You can return true if you want the customserialzer to serialize the data to the passed argument type.
Again, back to "[WTH]?" What's the "Accept type" of the request? And what the hell has the request got to do with a call to serializeJson()? You might think that "Accept type" references some HTTP header or something, but there is no "Accept type" header in the HTTP spec (that I can find: "Hypertext Transfer Protocol -- HTTP/1.1: 14 Header Field Definitions"). There's an "Accept" header (in this case: "text/html,application/xhtml+xml,application/xml;q=0.9,image/webp,*/*;q=0.8"), and other ones like "Accept-Encoding", "Accept-Language"... but none of which contain a value of "XML". Even if there was... how would it be relevant to the question as to whether a Basic.cfc instance can be serialised? Raised as bug: 3750730.
serialize() gets more sensible arguments:
serialize - struct
1
https://www.blogger.com/nullserialize - component scribble.shared.git.blogExamples.coldfusion.CF11.customerserialiser.Basic
2
JSON
So the first is the object to serialise (which surely should be part of the question canSerialize() is supposed to ask, and the format to serialise to. Cool.
canDeserialize() is passed this:
canDeserialize - struct
1
JSON
I guess it's because it's being called from deserializeJson(), so it's legit to expect the input value is indeed JSON. Fair enough. (Note: I'm not actually passing it JSON, but that's beside the point here).
And deserialize() is passed this:
deserialize - struct
1
SERIALISED
2
JSON
3
[empty string]
The first argument is the value to work on, and the second is the type of deserialisation to do. I have no idea what the third argument is for, and it's not mentioned directly or indirectly on that docs page. So dunno what the story is there.
The next issue isn't a code-oriented one, but an implementation one: how the hell are we expected to work with this?
The only way to work here is for each function to have a long array of IF/ELSEIF statements which somehow identify each object type that is serialisable, and then return true from canSerialise(), or in the case of serialize(), go ahead and do the serialisation. So this means this one CFC needs to know about everything which can be serialised in the entire application. Talk about a failure in "separation of concerns".
You know the best way of determining if an object can be seriaslised? Ask it! Don't rely on something else needing to know. This can be achieved very easily in one of two ways:
Check to see if the object implements a "Serializable" interface, which requires a serialize() method to exist.
Or simply take the duck-typing approach: if a CFC implements a serialize() method: it can be serialised. By calling that method. Job done.
Either approach would work fine, keeps things nicely encapsulated, and I see merits in both. And either make far more sense than Adobe's approach. Which is like something from the "OO Failures Special Needs" class.
Deserialisation is trickier. Because it relies on somehow working out how to deserialise() an object. I'm not sure of the best approach here, but - again - how to deserialise something should be as close to the thing needing deserialisation as possible. IE: something in the serialised data itself which can be used to bootstrap the process.
This could simply be a matter of specifying a CFC type at a known place in the serialised data. EG: Adobe stipulates that if the serialised data is JSON, and at the top level of the JSON is a key eg: type, and the value is an extant CFC... use that CFC's deserialize() method. Or it could look for an object which contains a type and a method, or whatever. But Adobe can specify a contract there.
The only place I see a centralised CFC being relevant here is for a mechanism for handling serialised data that is neither a ColdFusion internal type, nor identifiable as above. In this case, perhaps they could provide a mechanism for a serialisation router, which basically has a bunch of routes (if/elseifs if need be) which contains logic as to how to work out how to deserialise the data. But it should not be the actual deserialiser, it should simply have the mechanism to find out how to do it. This is actually pretty much the same in operation as the deserialize() approach in the current implementation, but it doesn't need the canDeserialize() method (it can return false at the end of the routing), and it doesn't need to know about serialising. And also it's not the main mechanism to do the deserialisation, it's just the fall back if the prescribed approach hasn't been used.
TBH, this still sounds a bit jerry-built, and I'm open for better suggestions. This is probably a well-trod subject in other languages, so it might be worth looking at how the likes of Groovy, Ruby or even PHP (eek!) achieve this.
There's still another issue with the current approach. And this demonstrates that the Adobe guys don't actually work with either CFML applications or even modern websites. This approach only works for a single, stand-alone website (like how we might have done in 2001). What if I'm not in the business of building websites, but I build applications such as FW/1 or ColdBox or the like? Or any sort of "helper" application. They cannot use the current Adobe implementation of the customserializer. Why? Because the serialisation code needs to be in a website-specific CFC. There's no way for Luis to implement a custom serialiser in ColdBox (for example), and then have it work for someone using ColdBox. Because it relies on either editing Application.cfc to specify a different CFC, or editing the existing customSerializer CFC. Neither of which are very good solutions. This should have been immediately apparent to the Adobe engineer(s) implementing this stuff had they actually had any experience with modern web applications (which generally aren't just a single monolithic site, but an aggregation of various other sub applications). Equally, I know it's not a case of having thought about this and [I'm just missing something], because when I asked them the other day, at first they didn't even get what I was asking, but when I clarified were just like "oh yeah... um... err... yeah, you can't do that. We'll... have to... ah yeah". This has been raised as bug 3750731.
So I declare the intent here valid, but the implementation to be more alpha- / pre-release- quality, not release-ready.
Still: it could be easily deprecated and rework fairly easily. I've raised this as bug 3750732.
Or am I missing something?
Adam

Yes, you can easily add additional questions to the Lookup.WebClient.Questions Lookup to allow some additional choices. We have added quite a few additional choices, we have noticed that removing them once people have selected them causes some errors.
You can also customize the required number of questions to select when each user sets them up as well as the number required to be correct to reset the password, these options are in the System Configuration settings.
If you need multi-language versions of the questions, you will also need to modify the appropriate language resource file in the xlWebApp.war file to provide the necessary translations for the values entered into the Lookup.

Built it!! Now, some more questions . . .

Similar Messages

Maybe you are looking for