Bulk Administration Tool for VG224

Is there a way to bulk import VG224's into CallManger 4.1(3). I have about 75 VG224's and must assign a directory number for each. I've tried VGC,and Virtual VGC templates that end up with a VG248 config. Any ideas would be great for the VG224. Thanks.

CSCeg88823
Add support to BAT for vg224 ports
The status of this defect is still New and there is not ETA
//G

Similar Messages

  • Unity Bulk Administration Tool update

    I just ran the 10/30/06 update of the Cisco Bulk Administration Tool from http://www.cicsounitytools.com. BAT no longer works. The browser comes up with a blank (white) page....It looks like I ran the CUC version of the tool update. Any suggestions that will keep me from tearing apart the Unity box?

    Hi Mike,
    Have you tried using Bulk Edit (with .csv)?
    User with Voicemail > Users referenced in this CSV file > Next
    Here's a clip that speaks to how this is run now. You first search and select all
    the users you want to change and then choose Bulk Edit;
    To Edit User Account Information in Bulk Edit Mode (some editing from original this example
    is for Caller Input settings but you'll see the point)
    Step 1 In Cisco Unity Connection Administration, on the Search Users page, check the applicable user check boxes, and select Bulk Edit.
    If the user accounts that you want to edit in bulk do not all appear on  one Search page, check all applicable check boxes on the first page,  then go to the next page and check all applicable check boxes, and so  on, until you have selected all applicable users. Then select Bulk Edit.
    Step 2 On the Edit Caller Input page, change settings as applicable.
    Note The  Status message at the top of the Edit Caller Input page tells you how  many user accounts are being edited. Also note that the page is  populated only with the fields that you are allowed to edit in bulk  mode, and that the fields available for edit also depend on whether all  of the user accounts reside on the local server.
    Step 3 If applicable, set the Bulk Edit Task Scheduling Fields to schedule the Bulk Edit operation for a later date and/or time.
    Step 4 Select Submit.
    Step 5 If  applicable, continue to change settings for these user accounts on the  related pages available from the Edit menu. As you make changes on each  page, select Submit before going on to the next page to make additional changes.
    http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/user_mac/guide/8xcucmac090.html#wp1049545
    Try a couple of test users first to come up with the exact plan.
    Cheers!
    Rob
    "Clocks go slow in a place of work
    Minutes drag and the hours jerk" 
    -The Clash

  • Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise

    Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise 
    Standalone installer available here
    http://www.microsoft.com/en-us/download/details.aspx?id=28972
    fails with error code 0x80004005
    Is this because my installation has issues, or would the admin pack files be updated for RTM?
    Thank you in advance for any insight

    Found the solution here:
    http://social.technet.microsoft.com/Forums/en-US/w8itprogeneral/thread/6d8745e0-c4c1-463a-b4bb-09f6c9c22527
    Workaround:
    Download the RSAT package intended for Windows 8 Release Preview: http://www.microsoft.com/en-us/download/details.aspx?id=28972
    Extract the .msu file with a tool such as 7-Zip.
    Open an Admin command prompt and change directory to where you extracted the .msu.
    Run the following command to install (if x86 you probably have a different .xml filename): pkgmgr /n:Windows6.2-KB2693643-x64.xml
    Wait a while. You can look in task manager for pkgmgr. When it disappears, the installation is done.
    Use the tools as per usual.

  • Installing administrative tools for Windows 10 Technical Preview for Enterprise

    At first I was upgrade my Windows 8.1 to Windows 10 Technical Preview for Enterprise every things done will then
    I try to install administrative tools for windows 10 technical preview for enterprise I found the .msu file from Microsoft website but when I tried to install it, it gives me the following error:
    Windows Update Standalone Installer
    installer encountered and error: 0x8024001d
    is there anyone to help me regarding above issue.
    Thanks
    Zelgay Kunari

    Hi zelgay,
    This is my result:
    From your error code, it seems this is relate to your windows update, please use following command to fix corrupted files:
    DISM.exe /Online /Cleanup-image /Restorehealth
    In the meantime, you can delete temporary update files in the SoftwareDistribution folder:
    Stop Windows Update service.
    Open File Explorer.
    Double-click the local hard disk where Windows is installed, typically drive C.
    Double-click the Windows folder, and then double-click the
    SoftwareDistribution folder.
    Double-click the DataStore folder to open it, and then delete all files and folders in the folder.
    Note If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
    Click the Back button. In the SoftwareDistribution folder, double-click the
    Download folder to open it, and then delete all files in the folder.
    Restart Windows Update service.
    Alex Zhao
    TechNet Community Support

  • Remote Server Administration Tools for Windows 10 Technical Preview Not installing

    When i try and install the remote server administration tools for windows 10 on my windows 10 technical preview install i get this error
    Any ideas why this is happening? when i'm installing the correct version for windows 10
    http://www.microsoft.com/en-us/download/details.aspx?id=44280

    On Thu, 12 Feb 2015 07:33:29 +0000, samfty wrote:
    Any ideas why this is happening? when i'm installing the correct version for windows 10
    If you're running 9926 then you're not installing the correct version. If
    you expand the Details section you'll see that version was published last
    October. You'll need this one, which was published in at the end of
    January:
    http://www.microsoft.com/en-us/download/details.aspx?id=45520
    Paul Adare - FIM CM MVP
    Q. How do you solve bus problems?
    A. Shoot the driver.

  • Unsubscribe IP service with Bulk Administration Tool

    I can subscribe IP service to IP Phone with Bulk Administration Tool, but how to unsubscribe IP service form 1000 IP phones. I can’t delete IP service, because IP service is subscribe to User Device Profile. CCM version is 3.3.3.

    BAT doesn't have a feature to unsubscribe/delete IP
    services. It is not on the roadmap either.

  • Server Administration Tools for Windows 8

    I've been trying to download/install Server Administration Tools for Windows 8 on my Win8 RTM box. regardless of what version of Server Admin tools I try to install I get the same error:
    I've been getting the download from
    http://www.microsoft.com/en-us/download/details.aspx?id=28972
    I've also tried
    http://www.microsoft.com/en-us/download/details.aspx?id=7887
    Any suggestions? I know this is quite vague, which is why I don't know how to go about figuring it out, so if you have any leading questions please feel free to ask!
    Thank you.

    Nope, I'm afraid the link on the blog you posted is broken, get the 'page not found' message
    We
    are sorry, the page you requested cannot be found.
    The
    URL may be misspelled or the page you're looking for is no longer available.
    We
    are sorry, the page you requested cannot be found.
    The
    URL may be misspelled or the page you're looking for is no longer available.

  • Bulk Admin tool for CM 6.1

    Where is it? I would like to change the line text labels on all the phones associated with certain numbers. -Thank You

    Hi Chris,
    In your version of CCM, BAT should be under the Admin page already :)
    Bulk Administration Installation
    BAT is installed as part of the Cisco Unified Communications Manager Administration.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bat/6_1_1/t01batow.html
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmcfg/b10bat.html
    Hope this helps!
    Rob

  • Oracle Business Intelligence Administration Tool for Windows

    I am having issues installing Oracle Business Intelligence 11g Client on Windows 7 32 bit.
    This is how we set up our server:
    - OBIEE 11g Server is installed and configured in RHEL 5 64bit.
    (We have installed and configured Oracle Database, RCU and the OBIEE)
    - Our users are working on a Windows 7 32 bit and they are the one who will be accessing the BI Server.
    I have come across a bunch of information regarding our setup. I am sure that our BI Server is working properly as a matter of fact, we can now use Oracle Warehouse Builder of the BI Server.
    According to Metalink Doc Id: 417656.1, OBIEE Tools are only available in Windows platforms. I beleive this is the reason why we only configured OWB in our BI server (which is in RedHat) and we cannot find a way to configure OBIEE Admin Tools. But when I read the doc id, it applies to 10g versions of BI Server, what about 11g? Is there a way to configure and use OBIEE Admin tools from the BI Server in Linux?
    Also, according to the official docs:
    http://docs.oracle.com/cd/E14571_01/bi.1111/e10539/c4_installing.htm#CEGEHEJF
    4.6.1 Installing Oracle Business Intelligence Client Tools
    "..If you installed Oracle Business Intelligence on a computer running a Linux, UNIX, or 64-bit Windows operating system, and you want to use Oracle Business Intelligence client tools, you must perform the following additional steps..."
    So in my own understanding, this fits our current setup. Is this the correct solution so we can access OWB of the BI Server and use BI Admin tools from our 32 bit windows?
    Also, I have read many bloggers and users having issues in Windows 7? Following the official docs i pasted here which has steps 1-3, is Windows 7 supported by Oracle Business Intelligence 11g?
    Any help, confirmation (with credible basis) and further questions about this issue will be very much honored. Thanks a lot!

    Hi ,
    Oracle BI for CC&B has few Standard(Demo) reports packaged with this software for example CI_CSEOPN (Case by Type and Age), If we need to know the logic of this report where do we find the information as the code for this report is not user friendly which is mainly stored as functions and not understandable, Please let me know if you have any information to get the logic of this report.
    Thanks
    Vivek

  • MOSS 2007 bulk upload tools for upload 80 gb data to library

    hi,
    i have created document library on MOSS 2007 , now i need to upload 80 gb data to library .
    please help.
    Thanks,
    Saidireddy

    Assuming you're migrating from the file system:
    - Windows Explorer view for simple scenarios (limited feedback if something goes wrong)
    - You can try if MS SyncToy supports 2007 (free tool, advanced features)
    - There are free community tools out there on TechNet gallery and CodePlex
    - Lastly, to do an Enterprise level migration you will need to use a commercial product such as DocAve or Quest
    So it depends on your needs and requirements
    Kind regards,
    Margriet Bruggeman
    Lois & Clark IT Services
    web site: http://www.loisandclark.eu
    blog: http://www.sharepointdragons.com

  • Bulk-enabling users for the Office 365 Messaging Service

    Is it possible to bulk-assign the Office 365 Messaging Service for Unity users after they are migrated to Office 365 from our on-premises Exchange environment instead of manually going into the Cisco Unity Connection Administration tool and performing these steps?
    4.1) Edit the user account in the Cisco Unity Connection Administration
    4.2) From the Edit drop-down menu, select Unified Messaging Accounts
    4.3) Click Add New
    4.4) Select the Office 365 messaging service you created
    4.5) Have it use the corporate email address unless it doesn't actually match the email address for the user on Office 365.
    4.6) Save
    I am hoping something can be done with the Bulk Administration Tool.... :).

    Yep its possible with BAT, i would export the users out. Modify the CSV to only reflect the users that you need, and make sure you have the 'serviceDisplayName' column populated and use the CSV to update it. The BAT column names can be found here: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/administration/guide/10xcucsagx/10xcucsagappb.html

  • Visual Administrator tool

    where can I download SAP J2EE Visual Administrator tool
    thank you

    Hi reza,
    Sidharth is right in his post that the Visual Administrator is not included in the Java EE 5 edition. And in fact, Visual Administrator will no longer be available in the next version of NetWeaver Application server. It is being replaced by a new, web-based administration tool for online administration of your <b>landscape</b>!
    The Java EE 5 Edition also contains this web-based tool with limited functionality.
    To use the new admin tool, you need to install it first by executing just a BAT file. Go to <Install_dir>\JP1\JC00\j2ee\NWAdmin directory and execute install.bat. Also, refer to the readme.txt. in the same directory for instructions how to start it.
    Another option for online administration of the preview would be the Telnet administrator where you execute shell commands.
    If you're more specific with what configuration tasks you need to perform, we might give you detailed steps of how you can do that with the admin tools available in the Java EE 5 Edition package.
    Hope that help!
    Message was edited by: Ivaylo Ivanov

  • Unable to create a clustered VM using Remote Server Administration Tools - Failover Cluster Manager

    Hi
    I am using two Hyper-V Server 2012 R2 and a single WS2012 Datacenter Edition with GUI Interface for management purpose.
    I have installed Failover Clustering feature on these two Hyper-V servers and remote server administration tools for Failover Clustering on WS2012 DC Edition with GUI.
    I have created cluster using powershell cmdlets on Hyper-V server because I was unable to create a cluster using RSAT-Failover Clustering (May be some privileges issues).
    The problem is " I am still not able to create a Hyper-VM using Failover Cluster Manager on WS2012 DC Edition server". It gives me an error "Invalid operation"
    Any Help regarding this issue will be very appreciated.
    Thanks in Advance.....
    Abhinav | MCTS-Server Virtualization

    Thanks Tim for your response but atleast I should be able to create and configure VMs for high availability. 
    I think this is not the issue which I am facing. It gives me an error "invalid class". There is something missing.
    Please check and let me know if it can be solved. Any help will be really appreciated.
    Thanks in advance.
    Abhinav | MCTS-Server Virtualization

  • OS X server 2.0.23 - What administration tools can be downloaded that are compatible?

    I have OS X server version 2.0.23.  I can't seem to find administration tools to download that are compatable whereas Lion Server has administration tools.  Where can I find the administration tools for OS X server 2.0.23?  None of the 10.X versions will work with it.

    As mentioned in other similar topics, most of the Server administration tools have been migrated to the Server.app, and only Workgroup Manager 10.8 has been upgrated for the Mountain Lion release.
    The Server Services control through command line is the same, and as powerfull as before.

  • Access Denied: CUCM Licensing Bulk Capabilities Assignment for CUPS

    Hi,
    I am building a CUPS 8.5 server. On CUCM 8.5 Administration System->Licensing->Capabilities Assignment->Bulk Assignment is giving me an error.
    Access to the requested resource has been denied.
    The attempted action was a violation of security protocols and will not be allowed. Please try another action.
    I noticed that the Bulk Assignment button is crossed out with a red sign.
    I can assign CUP/CUPS by clicking on the users individually.
    Any ideas why this might be happenning?
    Regards,
    Alp

    While Bulk Assignment doesn't work in the GUI, it is still possible to do Capabilities Assignment in CUCM 8.5 using the Bulk Administration Tool.  Format the comma-separated file according to the instructions in the View Sample File link in Bulk Administration -> CUPS -> Update CUPS/CUPC Users:
    User ID,Enable CUP,Enable CUPC
    xmzhou,t,t
    ddaiker,t,f
    |____|  | |
       |    |  |
       |    |  |
       |    |  |
       |    |  |
       |    | Enable CUPC (1 char, mandatory)
       |    |
       |     Enable CUP (1 char, mandatory)
       |
       |
       User ID ( 1 to 128 characters,  mandatory)
    Upload the file in Bulk Administration -> Upload/Download files as a CUP Users target and Update CUP Users transaction type, then apply the file in the CUPS user update page where you got the sample file.

Maybe you are looking for