Bulk Material List
Hello,
I was wondering if there was a way on SAP to get a list of all materials that are classified as bulk?
Hi,
If by classified as bulk you mean material master field in MRP2 called "Bulk material" then it is very easy to check directly in MARC table, basing the search on field MARC-SCHGT.
Of course this will show you the materials that are always bulk. But there is also an option to mark a single BOM item as bulk (then it is in table STPO-SCHGT). In this case material can be bulk in one product and not bulk in the other (or handled differently in different BOM items for same product).
Anyway - using these 2 fields in some queries should give you full picture.
BR,
Tomek
Similar Messages
-
How to run MRP for Bulk Material without using LTP
Hi, how can I run MRP for BULK material without using LTP.
Thanks in advance
BKHi,
Use trasnsaction code OPPQ and goto BOM Explosion and selection depends on
Field selected
No dependent requirements are created for informational purposes for bulk material items in the plant selected. This can improve system performance.
Field not selected
Dependent requirements are created for bulk material items in the plant selected. These dependent requirements are displayed in the planned order for informational purposes only. They are not considered in the net requirements calculation; that is, they are not included in material requirements planning (MRP) and are not displayed in the stock/requirements list
Reg,
Deepak.
Edited by: deepak k b on Nov 11, 2008 6:56 AM -
Report for Customer and Material list
Dear Experts,
Is there any Std. reprot to list all customers under particular sales org and also the material for each customer deals with.
Input only sales org.
Please advise,
Regards,
Sivahi,
Go for MCTA report ....anter the sales org as the criteria and get the out put .
You need to drill down til last to get the material list.
hope this will help you !!
Rgards,
Krishna O -
hi,
i want a material list for which if i specify a period i will get materials with
a)No goods reciept
b)No stock or material movement(issue/transfer posting etc).
c)no sales or shipping.
should have happened for the materials for that period.
if no standard report exists can you tell me the algoritthm.
urgent: satisfying answers will be awarded full pointsRajkiran,
am sure you will never setisfy even we send you number of report because you have to chenge according to your requirement.dont expect spoon feeding.
*& Object Id : &*
*& Object Name : ZMM_STO_REGISTER &*
*& Function Module Name : MM &*
*& Transaction Code : ZMMSTO &*
*& Author : Amit&*
*& Module Name : MATERIAL MANAGEMENT &*
*& Sub-Module : &*
*& Program Type : Report &*
*& Create Date : 28.03.2007 &*
*& Completion Date : 30.03.2007 &*
*& SAP Release : &*
*& Description : STO REGISTER &*
*& MODIFICATION LOG : MODIFIED AT 30.04.2007 adding new field &*
*& chapter-id by chakrapani mishra &*
REPORT zmm_sto_register.
* TABLES USED *
TABLES :vbrk, "Billing Document: Header Data
vbrp, "Billing Document: Item Data
mara, "General Material Data
konv, "Conditions (Transaction Data)
t023t, "Material Group Descriptions
ekko, "Purchasing Document Header
likp, "SD Document: Delivery Header Data
mvke, "Sales Data for Material
t001w, "Plants/Branches
marm, "Units of Measure for Material
j_1imtchid, "Combination of Material Number and Chapter ID
mseg,
mkpf,
j_1iexchdr.
TYPE-POOLS : slis. "TYPE POOL SLIS
* INTERNAL TABLES *
DATA: BEGIN OF t_vbrp OCCURS 0, "INTERNAL TABLE FOR VBRP
vbeln LIKE vbrp-vbeln, "Billing Document
vstel LIKE vbrp-vstel, "Shipping Point/Receiving Point
vgbel LIKE vbrp-vgbel, "Document number of the reference document
aubel LIKE vbrp-aubel, "Sales Document
matnr LIKE vbrp-matnr, "Material Number
arktx LIKE vbrp-arktx, "Short text for sales order item
matkl LIKE vbrp-matkl, "Material Group
fkimg LIKE vbrp-fkimg, "Actual Invoiced Quantity
werks LIKE vbrp-werks, "Plant
posnr LIKE vbrp-posnr, " Billing item
vrkme LIKE vbrp-vrkme, " Sales unit
vgbel1 LIKE mkpf-xblnr,
END OF t_vbrp.
DATA: BEGIN OF t_vbrk OCCURS 0, "INTERNAL TABLE FOR VBRK
kunag LIKE vbrk-kunag, "Sold-to party
vbeln LIKE vbrk-vbeln, "Billing Document
fkdat LIKE vbrk-fkdat, "Billing date for billing index and printout
knumv LIKE vbrk-knumv, "Number of the document condition
fkart LIKE vbrk-fkart, "Billing Type
vtweg LIKE vbrk-vtweg, "Distribution Channel
vkorg LIKE vbrk-vkorg, "Sales Organization
erzet LIKE vbrk-erzet,
w_flag TYPE c,
l_tabix TYPE sy-tabix,
END OF t_vbrk.
DATA: BEGIN OF t_temp1 OCCURS 0, "INTERNAL TABLE FOR VBRK
vbeln LIKE vbrp-vbeln, "Billing Document
fkart LIKE vbrk-fkart,
fkdat LIKE vbrk-fkdat,
vgbel LIKE vbrp-vgbel, "Document number of the reference document
werks LIKE vbrp-werks,
w_flag TYPE c,
END OF t_temp1.
DATA: BEGIN OF t_mara OCCURS 0, "INTERNAL TABLE FOR MARA
matnr LIKE mara-matnr, "Material Number
mtart LIKE mara-mtart, "Material Type
wrkst LIKE mara-wrkst, "Finish
extwg LIKE mara-extwg, "Design
labor LIKE mara-labor, "Grade/Category No.
normt LIKE mara-normt, "Thickness in mm
bismt LIKE mara-bismt, "Size (L*B) in mm
matkl LIKE mara-matkl,
spart LIKE mara-spart,
meins LIKE mara-meins,
END OF t_mara.
DATA : BEGIN OF t_konv OCCURS 0, "INTERNAL TABLE FOR KONV
knumv LIKE konv-knumv, "Number of the document condition
kposn LIKE konv-kposn, "Condition item number
kschl LIKE konv-kschl, "Condition type
kwert LIKE konv-kwert, "Condition value
kbetr LIKE konv-kbetr, "Condition rate
END OF t_konv.
DATA : BEGIN OF t_likp OCCURS 0, "INTERNAL TABLE FOR LIKP
vbeln LIKE likp-vbeln, "Delivery
lfdat LIKE likp-lfdat, "Delivery Date
kunnr LIKE likp-kunnr,
bldat LIKE likp-bldat, " document date
vbeln_kp LIKE mkpf-xblnr, " likp-vbeln,
END OF t_likp.
DATA : BEGIN OF t_t023t OCCURS 0, "INTERNAL TABLE FOR T023T
matkl LIKE t023t-matkl, "Material Group
wgbez LIKE t023t-wgbez, "Material Group Description
spras LIKE t023t-spras, "Language Key
END OF t_t023t.
DATA : BEGIN OF t_ekko OCCURS 0, "INTERNAL TABLE FOR EKKO
ebeln LIKE ekko-ebeln, "Purchasing Document Number
bsart LIKE ekko-bsart, "Purchasing Document Type
aedat LIKE ekko-aedat, "Date on Which Record Was Created
knumv LIKE ekko-knumv, "Number of the document condition
END OF t_ekko.
DATA : BEGIN OF t_ekpo OCCURS 0, "INTERNAL TABLE FOR EKKO
ebeln LIKE ekko-ebeln, "Purchasing Document Number
loekz LIKE ekko-loekz, "Purchasing Document Type
END OF t_ekpo.
DATA : BEGIN OF t_mvke OCCURS 0,
matnr LIKE mvke-matnr,
mvgr1 LIKE mvke-mvgr1,
END OF t_mvke.
DATA : BEGIN OF t_t001w OCCURS 0, "INTERNAL TABLE FOR KONV
werks LIKE t001w-werks, "Number of the document condition
name1 LIKE t001w-name1, "Condition type
kunnr LIKE t001w-kunnr, "Condition value
name2 LIKE t001w-name2, "Condition item number
END OF t_t001w.
DATA : BEGIN OF t_t001w2 OCCURS 0, "INTERNAL TABLE FOR KONV
werks LIKE t001w-werks, "Number of the document condition
name1 LIKE t001w-name1, "Condition type
kunnr LIKE t001w-kunnr, "Condition value
name2 LIKE t001w-name2, "Condition item number
END OF t_t001w2.
DATA : BEGIN OF t_marm OCCURS 0,
matnr LIKE marm-matnr,
meinh LIKE marm-meinh,
umrez LIKE marm-umrez,
umren LIKE marm-umren,
END OF t_marm.
DATA : BEGIN OF t_tvm1t OCCURS 0,
mvgr1 LIKE tvm1t-mvgr1,
bezie LIKE tvm1t-bezei,
END OF t_tvm1t.
**********************modification additioon of chapter ID 30.04.2007
DATA : BEGIN OF t_j_1imtchid OCCURS 0, "INTERNAL TABLE FOR j_1imtchid
matnr LIKE j_1imtchid-matnr, "Material Number
j_1ichid LIKE j_1imtchid-j_1ichid, "Chapter ID
END OF t_j_1imtchid.
DATA : BEGIN OF t_j_1iexchdr OCCURS 0, "INTERNAL TABLE FOR j_1imtchid
exnum LIKE j_1iexchdr-exnum, "Material Number
exdat LIKE j_1iexchdr-exdat, "Chapter ID
rdoc LIKE j_1iexchdr-rdoc,
werks LIKE j_1iexchdr-werks,
status LIKE j_1iexchdr-status,
trntyp LIKE j_1iexchdr-trntyp,
END OF t_j_1iexchdr.
**********************modification additioon of chapter ID 30.04.2007
DATA: BEGIN OF t_final OCCURS 0, "INTERNAL TABLE T_FINAL
fkart LIKE vbrk-fkart,
kunag LIKE vbrk-kunag,
vbeln_k LIKE vbrk-vbeln,
fkdat LIKE vbrk-fkdat,
knumv LIKE vbrk-knumv,
fkart1 LIKE vbrk-fkart,
vtweg LIKE vbrk-vtweg,
vkorg LIKE vbrk-vkorg,
vbeln LIKE likp-vbeln, "Delivery
vbeln_p LIKE vbrp-vbeln,
vstel LIKE vbrp-vstel,
"vgbel like mkpf-xblnr,
vgbel LIKE vbrp-vgbel,
aubel LIKE vbrp-aubel,
matnr LIKE vbrp-matnr,
arktx LIKE vbrp-arktx,
matkl LIKE vbrp-matkl,
fkimg LIKE vbrp-fkimg,
posnr LIKE vbrp-posnr,
vrkme LIKE vbrp-vrkme,
matnr_m LIKE mara-matnr,
mtart LIKE mara-mtart,
wrkst LIKE mara-wrkst,
extwg LIKE mara-extwg,
labor LIKE mara-labor,
normt LIKE mara-normt,
bismt LIKE mara-bismt,
spart LIKE mara-spart,
meins LIKE mara-meins,
kposn LIKE konv-kposn,
kschl LIKE konv-kschl,
kwert LIKE konv-kwert,
kwert1 LIKE konv-kwert,
kwert2 LIKE konv-kwert,
kwert3 LIKE konv-kwert,
kwert4 LIKE konv-kwert,
kwert5 LIKE konv-kwert,
kbetr LIKE konv-kbetr,
vbeln_kp LIKE mkpf-xblnr, " likp-vbeln,
lfdat LIKE likp-lfdat,
wgbez LIKE t023t-wgbez,
spras LIKE t023t-spras,
bsart LIKE ekko-bsart,
aedat LIKE ekko-aedat,
**********************modification additioon of chapter ID 30.04.2007
j_1ichid LIKE j_1imtchid-j_1ichid ,
**********************modification additioon of chapter ID 30.04.2007
total TYPE p DECIMALS 2,
mvgr1 LIKE mvke-mvgr1,
werks LIKE t001w-werks, "Number of the document condition
kunnr LIKE t001w-kunnr, "Condition value
name1 LIKE t001w-name1, "Condition type
name2 LIKE t001w-name2, "Condition item number
werks1 LIKE t001w-werks, "Number of the document condition
kunnr1 LIKE t001w-kunnr, "Condition value
name11 LIKE t001w-name1, "Condition type
name21 LIKE t001w-name2,
exnum LIKE j_1iexchdr-exnum, "Material Number
exdat LIKE j_1iexchdr-exdat, "Chapter ID
rdoc LIKE j_1iexchdr-rdoc,
bom TYPE p DECIMALS 4,
mult TYPE p DECIMALS 4,
bezie LIKE tvm1t-bezei,
length(5) TYPE n,
breath(5) TYPE n,
bldat LIKE likp-bldat, " document date
size(15) TYPE p DECIMALS 2,
area(15) TYPE p DECIMALS 2,
mblnr TYPE mseg-mblnr, "Number of Material Document
mjahr TYPE mseg-mjahr, "Material Document Year
budat TYPE mkpf-budat, "Posting period
w_flag TYPE c,
flag TYPE c,
END OF t_final.
DATA : BEGIN OF t_temp OCCURS 0,
kunag LIKE vbrk-kunag,
vbeln_k LIKE vbrk-vbeln,
fkdat LIKE vbrk-fkdat,
knumv LIKE vbrk-knumv,
fkart LIKE vbrk-fkart,
vtweg LIKE vbrk-vtweg,
vkorg LIKE vbrk-vkorg,
vbeln LIKE likp-vbeln, "Delivery
vbeln_p LIKE vbrp-vbeln,
vstel LIKE vbrp-vstel,
"vgbel like mkpf-xblnr,
vgbel LIKE vbrp-vgbel,
aubel LIKE vbrp-aubel,
matnr LIKE vbrp-matnr,
arktx LIKE vbrp-arktx,
matkl LIKE vbrp-matkl,
fkimg LIKE vbrp-fkimg,
posnr LIKE vbrp-posnr,
vrkme LIKE vbrp-vrkme,
matnr_m LIKE mara-matnr,
mtart LIKE mara-mtart,
wrkst LIKE mara-wrkst,
extwg LIKE mara-extwg,
labor LIKE mara-labor,
normt LIKE mara-normt,
bismt LIKE mara-bismt,
spart LIKE mara-spart,
meins LIKE mara-meins,
kposn LIKE konv-kposn,
kschl LIKE konv-kschl,
kwert LIKE konv-kwert,
kwert1 LIKE konv-kwert,
kwert2 LIKE konv-kwert,
kwert3 LIKE konv-kwert,
kwert4 LIKE konv-kwert,
kwert5 LIKE konv-kwert,
kbetr LIKE konv-kbetr,
vbeln_kp LIKE mkpf-xblnr, " likp-vbeln,
lfdat LIKE likp-lfdat,
wgbez LIKE t023t-wgbez,
spras LIKE t023t-spras,
bsart LIKE ekko-bsart,
aedat LIKE ekko-aedat,
**********************modification additioon of chapter ID 30.04.2007
j_1ichid LIKE j_1imtchid-j_1ichid ,
**********************modification additioon of chapter ID 30.04.2007
total TYPE p DECIMALS 2,
mvgr1 LIKE mvke-mvgr1,
werks LIKE t001w-werks, "Number of the document condition
kunnr LIKE t001w-kunnr, "Condition value
name1 LIKE t001w-name1, "Condition type
name2 LIKE t001w-name2, "Condition item number
werks1 LIKE t001w-werks, "Number of the document condition
kunnr1 LIKE t001w-kunnr, "Condition value
name11 LIKE t001w-name1, "Condition type
name21 LIKE t001w-name2,
exnum LIKE j_1iexchdr-exnum, "Material Number
exdat LIKE j_1iexchdr-exdat, "Chapter ID
rdoc LIKE j_1iexchdr-rdoc,
bom TYPE p DECIMALS 4,
mult TYPE p DECIMALS 4,
bezie LIKE tvm1t-bezei,
length(5) TYPE n,
breath(5) TYPE n,
size(15) TYPE p DECIMALS 2,
area(15) TYPE p DECIMALS 2,
mblnr TYPE mseg-mblnr, "Number of Material Document
mjahr TYPE mseg-mjahr, "Material Document Year
budat TYPE mkpf-budat, "Posting period
END OF t_temp.
DATA : BEGIN OF it_mseg OCCURS 0,
werks LIKE mseg-werks,
matnr LIKE mseg-matnr,
ebeln LIKE mseg-ebeln,
mblnr TYPE mseg-mblnr, "Number of Material Document
mjahr TYPE mseg-mjahr, "Material Document Year
END OF it_mseg.
DATA : BEGIN OF it_mkpf OCCURS 0,
budat TYPE mkpf-budat,
mblnr TYPE mkpf-mblnr,
tcode2 LIKE mkpf-tcode2,
" xblnr(10) TYPE C,
xblnr LIKE likp-vbeln, "Delivery
END OF it_mkpf.
DATA : BEGIN OF it_vbuk OCCURS 0,
vbeln LIKE vbuk-vbeln,
wbstk LIKE vbuk-wbstk,
END OF it_vbuk.
DATA : it_vbrk LIKE t_vbrk OCCURS 0 WITH HEADER LINE.
DATA : it_vbrp LIKE t_vbrp OCCURS 0 WITH HEADER LINE.
DATA : it_mara LIKE t_mara OCCURS 0 WITH HEADER LINE.
TYPES : w_str TYPE string,
str TYPE string.
* WORK AREAS *
DATA: wa_vbrk LIKE t_vbrk. "WORK AREA FOR VBRK
DATA: wa_vbrp LIKE t_vbrp. "WORK AREA FOR VBRP
DATA: wa_mara LIKE t_mara. "WORK AREA FOR MARA
DATA: wa_sfinal LIKE t_temp. "WORK AREA FOR T_FINAL
DATA: wa_sfinal1 LIKE t_final. "WORK AREA FOR T_FINAL
DATA: wa_mseg LIKE it_mseg. "Workarea for internal table mseg
DATA : wa_vbeln LIKE t_vbrk-vbeln.
DATA: wa_mkpf LIKE it_mkpf. "Workarea for internal table mkpf
* ALV *
DATA: it_fieldcat TYPE slis_t_fieldcat_alv,
wa_fieldcat LIKE LINE OF it_fieldcat,
it_top_of_page TYPE slis_t_listheader,
ls_layout TYPE slis_layout_alv,
gt_events TYPE slis_t_event.
* SELECTION-SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK detail WITH FRAME TITLE text-000.
SELECT-OPTIONS: supp_pnt FOR vbrp-vstel OBLIGATORY. "SUPPLYING PLANT
SELECT-OPTIONS: recv_pnt FOR vbrk-kunag OBLIGATORY. "RECEIVING PLANT
SELECT-OPTIONS: period FOR vbrk-fkdat OBLIGATORY. "PERIOD
SELECT-OPTIONS: budat FOR mkpf-budat. " MIGO DATE
SELECTION-SCREEN END OF BLOCK detail.
* START-OF-SELECTION *
***********************************POPULATING DATA
PERFORM populating_data.
**********************************MOVE DATA
PERFORM move_data.
*********************************DATA- FETCHING
PERFORM data_fetching.
*********************************GET ALV DATA
PERFORM alv_get_data.
*********************************ALV GRID DATA
PERFORM alv_grid.
*********************************TOP OF PAGE
PERFORM top_of_page.
* VALIDATION OF SELECTION SCREEN *
AT SELECTION-SCREEN ON period.
IF period-high IS INITIAL.
MESSAGE e001(zamit).
ENDIF.
* SELECTION OF DATA *
FORM populating_data.
*************POPULATING DATA FROM VBRK
CLEAR t_vbrk.
REFRESH t_vbrk.
SELECT kunag
vbeln
fkdat
knumv
fkart
vtweg
vkorg
erzet
FROM vbrk INTO TABLE t_vbrk
WHERE kunag IN recv_pnt AND
fkdat IN period AND
fkart = 'JEX' OR
fkart = 'F8' AND
vtweg = '10' AND
vkorg = '1000'.
DELETE t_vbrk[] WHERE fkdat = '' .
DELETE t_vbrk[] WHERE fkdat NOT IN period.
DELETE t_vbrk[] WHERE kunag NOT IN recv_pnt.
IF t_vbrk[] IS INITIAL.
MESSAGE i002(zamit).
LEAVE LIST-PROCESSING.
ENDIF.
DELETE t_vbrk WHERE fkdat NOT IN period.
*DATA: l_tabix TYPE sy-tabix. " declare the sy-tabix as local variable
*DATA: l_lines TYPE sy-tabix.
*DATA: l_index TYPE sy-tabix.
*"SORT T_VBRK DESCENDING BY vbeln.
*SORT T_VBRK ASCENDING BY vbeln fkart .
*DESCRIBE TABLE t_vbrk LINES l_lines . "The current number of table rows of the internal table itab is determined and is assigned to the data object lin
*CHECK l_lines > 1. " check lines are greater than 1
*LOOP AT t_vbrk.
* l_tabix = sy-tabix. " assine Index of Internal Tables into local var l_tabix
* l_index = l_tabix + 1.
* IF t_vbrk-fkart = 'F8'. " loop on the temp table
*READ TABLE t_vbrk INTO wa_vbrk INDEX l_index. " read the temp table with index l_index
*IF sy-subrc = 0.
*CHECK t_vbrk-vbeln < wa_vbrk-vbeln .
* if sy-subrc = 0.
* t_vbrk-W_FLAG = 'X'.
* MODIFY t_vbrk TRANSPORTING W_FLAG.
*endif.
* endif.
*else.
* exit.
*endif.
*endloop.
*LOOP at t_vbrk.
*DELETE t_vbrk WHERE w_flag = 'X' .
*endloop.
*" change by kalika dated 28.06.2007
**" change by kalika dated 28.06.2007
*************POPULATING DATA FROM VBRP
IF t_vbrk[] IS NOT INITIAL.
CLEAR t_vbrp.
REFRESH t_vbrp.
SELECT vbeln
vstel
vgbel
aubel
matnr
arktx
matkl
fkimg
werks
posnr
vrkme
FROM vbrp INTO TABLE t_vbrp
FOR ALL ENTRIES IN t_vbrk
WHERE vbeln = t_vbrk-vbeln
AND vstel IN supp_pnt .
ENDIF.
IF sy-subrc <> 0.
MESSAGE i000(zamit).
LEAVE LIST-PROCESSING.
ENDIF.
IF t_vbrp[] IS NOT INITIAL.
SELECT vbeln wbstk FROM vbuk
INTO TABLE it_vbuk FOR ALL ENTRIES IN
t_vbrp WHERE vbeln = t_vbrp-vgbel.
ENDIF.
"DELETE t_vbrp[] WHERE vstel NOT in supp_pnt. " by kalika
*************POPULATING DATA FROM MARA
it_vbrp[] = t_vbrp[].
" it_vbrp-vgbel1 = t_vbrp-vgbel.
"SORT it_vbrp BY matnr.
SORT t_vbrp BY vbeln.
" DELETE ADJACENT DUPLICATES FROM it_vbrp COMPARING matnr . by kalika
* IF t_vbrp IS NOT INITIAL.
CLEAR t_mara.
REFRESH t_mara.
SELECT matnr
mtart
wrkst
extwg
labor
normt
bismt
matkl
spart
meins
FROM mara INTO TABLE t_mara
FOR ALL ENTRIES IN it_vbrp WHERE
matnr = it_vbrp-matnr .
* ENDIF.
*************POPULATING DATA FROM KONV
it_vbrk[] = t_vbrk[].
SORT it_vbrk BY knumv .
DELETE ADJACENT DUPLICATES FROM it_vbrk COMPARING knumv .
CLEAR t_konv.
REFRESH t_konv.
SELECT knumv
kposn
kschl
kwert
kbetr
FROM konv INTO TABLE t_konv
FOR ALL ENTRIES IN it_vbrk
WHERE knumv = it_vbrk-knumv.
DELETE t_konv WHERE
kschl <> 'ZR02'
AND kschl <> 'JEXP'
AND kschl <> 'JECS'
AND kschl <> 'DIFF'.
*************POPULATING DATA FROM LIKP
it_vbrp[] = t_vbrp[].
SORT it_vbrp BY vgbel.
" DELETE ADJACENT DUPLICATES FROM it_vbrp COMPARING vgbel . by kalika
CLEAR t_likp.
REFRESH t_likp.
SELECT vbeln
lfdat
bldat " NEW CHANGE
FROM likp INTO CORRESPONDING FIELDS OF TABLE t_likp
FOR ALL ENTRIES IN it_vbrp
WHERE vbeln = it_vbrp-vgbel.
*************POPULATING DATA FROM T023T
it_mara[] = t_mara[].
SORT it_mara BY matkl .
DELETE ADJACENT DUPLICATES FROM it_mara COMPARING matkl.
CLEAR t_t023t.
REFRESH t_t023t.
IF t_mara[] IS NOT INITIAL.
SELECT matkl
wgbez
spras
FROM t023t INTO TABLE t_t023t
FOR ALL ENTRIES IN it_mara
WHERE matkl = it_mara-matkl AND
spras = sy-langu.
ENDIF.
*************POPULATING DATA FROM EKKO
it_vbrp[] = t_vbrp[].
SORT it_vbrp BY aubel.
" DELETE ADJACENT DUPLICATES FROM it_vbrp COMPARING aubel. by kalika
CLEAR t_ekko.
REFRESH t_ekko.
SELECT ebeln
bsart
aedat
knumv
FROM ekko
INTO TABLE t_ekko
FOR ALL ENTRIES IN it_vbrp
WHERE ebeln = it_vbrp-aubel
AND bsart LIKE 'U%'.
************************delete invoice where it is being deleted from the system
*SELECT ebeln loekz
* FROM ekpo
* INTO CORRESPONDING FIELDS OF TABLE t_ekpo
* FOR ALL ENTRIES IN t_ekko
* WHERE ebeln = t_ekko-ebeln.
*DELETE t_ekpo WHERE loekz = 'L'.
*************POPULATING DATA FROM t001w
it_vbrp[] = t_vbrp[].
SORT it_vbrp BY werks.
" DELETE ADJACENT DUPLICATES FROM it_vbrp COMPARING werks . by kalika
CLEAR t_t001w.
REFRESH t_t001w.
SELECT werks
name1
kunnr
name2
FROM t001w INTO TABLE t_t001w
FOR ALL ENTRIES IN it_vbrp
WHERE werks = it_vbrp-werks .
it_vbrk[] = t_vbrk[].
SORT it_vbrk BY kunag.
DELETE ADJACENT DUPLICATES FROM it_vbrk COMPARING kunag .
CLEAR t_t001w2.
REFRESH t_t001w2.
SELECT werks
name1
kunnr
name2
FROM t001w INTO TABLE t_t001w2
FOR ALL ENTRIES IN it_vbrk
WHERE kunnr = it_vbrk-kunag .
*--------POPULATING DATA FROM MARM
SELECT matnr
meinh
umrez
umren FROM marm INTO TABLE t_marm
FOR ALL ENTRIES IN t_mara
WHERE matnr = t_mara-matnr.
*********************POPULATING DATA FROM MVKE
CLEAR t_mvke.
REFRESH t_mvke.
SELECT matnr
mvgr1
FROM mvke INTO TABLE t_mvke
FOR ALL ENTRIES IN t_vbrp
WHERE matnr = t_vbrp-matnr .
*-----------------POPULATING DATA FROM TVM1T.
SELECT
mvgr1 bezei FROM tvm1t
INTO TABLE t_tvm1t FOR ALL ENTRIES IN t_mvke
WHERE mvgr1 = t_mvke-mvgr1.
**********************modification additioon of chapter ID 30.04.2007
*-----------------POPULATING DATA FROM j_1imtchid.
CLEAR t_j_1imtchid.
REFRESH t_j_1imtchid.
SELECT matnr
j_1ichid
FROM j_1imtchid INTO TABLE t_j_1imtchid
FOR ALL ENTRIES IN t_vbrp
WHERE matnr = t_vbrp-matnr .
*-----------------POPULATING DATA FROM j_1iexchdr.
CLEAR t_j_1iexchdr.
REFRESH t_j_1iexchdr.
SELECT exnum
exdat
rdoc
werks
trntyp
status
FROM j_1iexchdr INTO TABLE t_j_1iexchdr
FOR ALL ENTRIES IN t_vbrp
WHERE rdoc = t_vbrp-vbeln
AND werks = t_vbrp-werks
AND trntyp = 'DLFC' . " by kalika
DELETE t_j_1iexchdr WHERE status = 'R' . " by kalika
DELETE t_j_1iexchdr WHERE status = 'B' . " by kalika
SORT t_j_1iexchdr BY rdoc.
***************end of modification additioon of chapter ID 30.04.2007
******* start of modification kalika dated 19.06.2007
LOOP AT t_likp.
t_likp-vbeln_kp = t_likp-vbeln.
MODIFY t_likp.
ENDLOOP.
* SELECT budat mblnr xblnr tcode2
* FROM mkpf
* INTO CORRESPONDING FIELDS OF TABLE it_mkpf
* FOR ALL ENTRIES IN t_likp
* WHERE xblnr = t_likp-vbeln_kp
* AND tcode2 LIKE 'MIGO_GR'
* AND budat IN budat. "26.07.2007
SELECT ebeln mblnr FROM mseg
INTO CORRESPONDING FIELDS OF TABLE it_mseg
FOR ALL ENTRIES IN t_vbrp
WHERE ebeln = t_vbrp-aubel AND mblnr LIKE '5%'.
SELECT budat mblnr tcode2
FROM mkpf
INTO CORRESPONDING FIELDS OF TABLE it_mkpf
FOR ALL ENTRIES IN it_mseg
WHERE mblnr = it_mseg-mblnr
AND tcode2 LIKE 'MIGO_GR'
AND budat IN budat. "26.07.2007
*loop at it_mkpf.
*DELETE it_mkpf WHERE mblnr = '4'.
*MODIFY it_mkpf.
*ENDLOOP.
ENDFORM. "populating_data
* FORM MOVE_DATA. *
FORM move_data.
CLEAR t_final.
REFRESH t_final.
SORT : t_vbrp BY vbeln,
t_vbrk BY vbeln,
t_mara BY matnr,
t_likp BY vbeln,
t_ekko BY ebeln,
t_t023t BY matkl,
t_konv BY knumv,
t_mvke BY matnr,
t_t001w BY werks,
t_t001w2 BY kunnr,
t_tvm1t BY mvgr1,
t_j_1iexchdr BY rdoc,
t_j_1imtchid BY matnr,
t_j_1iexchdr BY rdoc werks,
" it_mkpf by mblnr,
it_mseg BY mblnr,
it_mkpf BY mblnr,
it_vbuk BY vbeln.
CLEAR t_vbrp.
LOOP AT t_vbrp.
t_final-vstel = t_vbrp-vstel.
t_final-vgbel = t_vbrp-vgbel.
t_final-aubel = t_vbrp-aubel.
t_final-matnr = t_vbrp-matnr.
t_final-arktx = t_vbrp-arktx.
t_final-matkl = t_vbrp-matkl.
t_final-fkimg = t_vbrp-fkimg.
t_final-posnr = t_vbrp-posnr.
t_final-vrkme = t_vbrp-vrkme.
" t_vbrp-vgbel1 = t_vbrp-vgbel.
READ TABLE it_vbuk WITH KEY vbeln = t_vbrp-vgbel BINARY SEARCH.
IF sy-subrc = 0.
t_final-flag = it_vbuk-wbstk.
ENDIF.
CLEAR t_vbrk.
READ TABLE t_vbrk WITH KEY vbeln = t_vbrp-vbeln
BINARY SEARCH.
IF sy-subrc = 0.
t_final-kunag = t_vbrk-kunag.
t_final-vbeln_k = t_vbrk-vbeln.
t_final-fkdat = t_vbrk-fkdat.
t_final-fkart = t_vbrk-fkart.
t_final-knumv = t_vbrk-knumv.
ENDIF.
CLEAR t_mara.
READ TABLE t_mara WITH KEY matnr = t_vbrp-matnr BINARY SEARCH.
IF sy-subrc = 0.
t_final-mtart = t_mara-mtart.
t_final-wrkst = t_mara-wrkst.
t_final-extwg = t_mara-extwg.
t_final-labor = t_mara-labor.
t_final-normt = t_mara-normt.
t_final-bismt = t_mara-bismt.
t_final-spart = t_mara-spart.
t_final-meins = t_mara-meins.
SPLIT t_final-bismt AT '*' INTO t_final-length t_final-breath.
IF t_final-bismt = ''.
t_final-size = ''.
ELSE.
t_final-size = t_vbrp-fkimg * ( t_final-length * t_final-breath ) / 1000000.
ENDIF.
ENDIF.
CLEAR t_konv.
READ TABLE t_konv WITH KEY knumv = t_vbrk-knumv BINARY SEARCH.
IF sy-subrc = 0.
t_final-kschl = t_konv-kschl.
ENDIF.
CLEAR t_likp.
READ TABLE t_likp WITH KEY vbeln = t_vbrp-vgbel BINARY SEARCH.
IF sy-subrc = 0.
t_final-lfdat = t_likp-lfdat.
t_final-bldat = t_likp-bldat. " NEW CHANGE
t_final-vbeln_kp = t_likp-vbeln.
ENDIF.
CLEAR t_ekko.
READ TABLE t_ekko WITH KEY ebeln = t_vbrp-aubel BINARY SEARCH.
IF sy-subrc = 0.
t_final-aedat = t_ekko-aedat.
ENDIF.
CLEAR t_t023t.
READ TABLE t_t023t WITH KEY matkl = t_vbrp-matkl BINARY SEARCH.
IF sy-subrc = 0.
t_final-wgbez = t_t023t-wgbez.
ENDIF.
CLEAR t_t001w.
READ TABLE t_t001w WITH KEY werks = t_vbrp-werks BINARY SEARCH.
IF sy-subrc = 0.
t_final-name1 = t_t001w-name1.
ENDIF.
CLEAR t_t001w2.
READ TABLE t_t001w2 WITH KEY kunnr = t_vbrk-kunag BINARY SEARCH.
IF sy-subrc = 0.
t_final-name21 = t_t001w2-name2.
ENDIF.
READ TABLE t_mvke WITH KEY matnr = t_vbrp-matnr BINARY SEARCH.
IF sy-subrc = 0.
t_final-mvgr1 = t_mvke-mvgr1.
ENDIF.
READ TABLE t_tvm1t WITH KEY mvgr1 = t_mvke-mvgr1 BINARY SEARCH.
IF sy-subrc = 0.
t_final-bezie = t_tvm1t-bezie.
ENDIF.
**********************modification additioon of chapter ID 30.04.2007
READ TABLE t_j_1imtchid WITH KEY matnr = t_vbrp-matnr BINARY SEARCH.
IF sy-subrc = 0.
t_final-j_1ichid = t_j_1imtchid-j_1ichid.
ENDIF.
READ TABLE t_j_1iexchdr WITH KEY rdoc = t_vbrp-vbeln
werks = t_vbrp-werks
BINARY SEARCH.
IF sy-subrc = 0.
t_final-exnum = t_j_1iexchdr-exnum.
t_final-exdat = t_j_1iexchdr-exdat.
t_final-rdoc = t_j_1iexchdr-rdoc.
t_final-werks = t_j_1iexchdr-werks.
ENDIF.
**************end of modification additioon of chapter ID 30.04.2007
"******** START OF MODIFICATION KALIKA 26.07.2007.
READ TABLE it_mseg INTO wa_mseg WITH KEY ebeln = t_vbrp-aubel.
IF sy-subrc = 0.
t_final-mblnr = wa_mseg-mblnr.
ENDIF.
"INTO wa_mkpf
READ TABLE it_mkpf WITH KEY mblnr = t_final-mblnr
tcode2 = 'MIGO_GR'.
IF sy-subrc = 0.
t_final-budat = it_mkpf-budat.
ENDIF.
APPEND t_final.
CLEAR t_final.
ENDLOOP.
DELETE t_final[] WHERE flag = 'A' OR flag = ''. "change by amit for reverse deliveries as rkp.
DELETE t_final WHERE fkdat = ' ' .
DELETE t_final[] WHERE kunag NOT IN recv_pnt.
DELETE t_final[] WHERE vstel NOT IN supp_pnt.
DELETE t_final[] WHERE fkart = 'JEX' AND exnum = ' '. " CHANGE BY KALIKA
" FOR INVOICE WHOSE EXCISE NOT MAINTAINED
IF t_final[] IS INITIAL.
MESSAGE i002(zamit).
LEAVE LIST-PROCESSING.
ENDIF.
*---------------MARM CALCULATION
SORT t_marm BY matnr meinh.
DELETE t_marm WHERE meinh = 'M2'.
SORT t_marm BY matnr.
LOOP AT t_final.
READ TABLE t_marm WITH KEY matnr = t_final-matnr." T_MARM-MEINH <> 'M2'.
t_final-bom = ( t_marm-umrez / t_marm-umren ).
MODIFY t_final TRANSPORTING bom.
t_final-mult = t_final-bom * t_final-fkimg.
MODIFY t_final TRANSPORTING mult.
CLEAR t_final.
ENDLOOP.
*--------------------delivery no.
*-------------------beginning of adding na*******
LOOP AT t_final.
" *** change by kalika
IF t_final-matkl EQ 'BWGRBBD'
OR t_final-matkl = 'BWGRBPD'
OR t_final-matkl = 'BWGRCLB'
OR t_final-matkl = 'BWGRCMD'
OR t_final-matkl = 'BWGRGFB'
OR t_final-matkl = 'BWGRGFC'
OR t_final-matkl = 'BWGRGFO'
OR t_final-matkl = 'GRNLAM'
OR t_final-matkl = 'DVNRTKBB'
OR t_final-matkl = 'MRETBBD'
OR t_final-matkl = 'MRGRBBD'
OR t_final-matkl = 'MRGRCMD'
OR t_final-matkl = 'MRRBBD'
OR t_final-matkl = 'PLAMGBSD'
OR t_final-matkl = 'BWETBBD'
OR t_final-matkl = 'PLAMGOSD'.
* "LOOP AT t_final WHERE matkl = 'BWGRBBD'
*OR matkl = 'BWGRBPD'
*OR matkl = 'BWGRCLB'
*OR matkl = 'BWGRCMD'
*OR matkl = 'BWGRGFB'
*OR matkl = 'BWGRGFC'
*OR matkl = 'BWGRGFO'
*OR matkl = 'GRNLAM'
*OR matkl = 'DVNRTKBB'
*OR matkl = 'MRETBBD'
*OR matkl = 'MRGRBBD'
*OR matkl = 'MRGRCMD'
*OR matkl = 'MRRBBD'
*OR matkl = 'PLAMGBSD'
*OR matkl = 'BWETBBD'
*OR matkl = 'PLAMGOSD'.
*** change by kalika
t_final-area = ( t_final-size * 15 ) / 10 .
MODIFY t_final TRANSPORTING area.
ELSE.
t_final-area = ( t_final-normt * t_final-size ) / 4. "t_final-bom
MODIFY t_final TRANSPORTING area.
ENDIF.
ENDLOOP.
"*** change by kalika
" ** start Division Specific FA & NA to be displayed by kalika
LOOP AT t_final.
IF t_final-spart = 'LM' .
t_final-area = space.
ENDIF.
IF t_final-spart = 'DD'.
t_final-area = space.
ENDIF.
MODIFY t_final.
ENDLOOP.
* " ** end Division Specific FA & NA to be displayed by kalika
* LOOP AT t_final WHERE matkl = 'BWETPLY'
* OR matkl = 'BWGRCHQ'
* OR matkl = 'BWGRCLP'
* OR matkl = 'BWGRCMG'
* OR matkl = 'BWGRFLX'
* OR matkl = 'BWGRFRP'
* OR matkl = 'BWGRGCP'
* OR matkl = 'BWGRPCT'
* OR matkl = 'BWGRPLY'
* OR matkl = 'BWGRSHT'
* OR matkl = 'MRGRPLY'
* OR matkl = 'MRTPLY'.
* t_final-area = ( t_final-normt * t_final-bom ) / 4.
* MODIFY t_final.
* ENDLOOP.
*-------------------ending of adding na**********
ENDFORM. " move_data.
* data_fetching *
FORM data_fetching.
*------ASSESSIBLE VALUE
SORT t_final BY knumv.
SORT t_konv BY knumv kposn.
CLEAR t_final.
CLEAR t_konv.
LOOP AT t_konv.
IF t_konv-kschl = 'ZR02'.
READ TABLE t_final WITH KEY knumv = t_konv-knumv posnr = t_konv-kposn.
t_final-kwert1 = t_konv-kwert.
t_final-kbetr = t_konv-kbetr.
IF sy-tabix <> 0.
MODIFY t_final INDEX sy-tabix TRANSPORTING kwert1 kbetr.
CLEAR t_final.
CLEAR t_konv.
ENDIF.
ENDIF.
*-----EXICESE
IF t_konv-kschl = 'JEXP'.
READ TABLE t_final WITH KEY knumv = t_konv-knumv posnr = t_konv-kposn.
t_final-kwert2 = t_konv-kwert.
IF sy-tabix <> 0.
MODIFY t_final INDEX sy-tabix TRANSPORTING kwert2.
CLEAR t_final.
CLEAR t_konv.
ENDIF.
ENDIF.
*-------CESS
IF t_konv-kschl = 'JECS'.
READ TABLE t_final WITH KEY knumv = t_konv-knumv posnr = t_konv-kposn.
t_final-kwert3 = t_konv-kwert.
IF sy-tabix <> 0.
MODIFY t_final INDEX sy-tabix TRANSPORTING kwert3.
CLEAR t_final.
CLEAR t_konv.
ENDIF.
ENDIF.
*-----ROUNDING
IF t_konv-kschl = 'DIFF'.
READ TABLE t_final WITH KEY knumv = t_konv-knumv posnr = t_konv-kposn.
t_final-kwert4 = t_konv-kwert.
IF sy-tabix <> 0.
MODIFY t_final INDEX sy-tabix TRANSPORTING kwert4.
CLEAR t_final.
CLEAR t_konv.
ENDIF.
ENDIF.
ENDLOOP.
****************TOTAL OF ALL VALUES
LOOP AT t_final.
t_final-total = t_final-kwert1 + t_final-kwert2 + t_final-kwert3 + t_final-kwert4.
MODIFY t_final INDEX sy-tabix TRANSPORTING total .
CLEAR t_final.
ENDLOOP.
*--------------delivery calculation.
" start change by kalika
DELETE t_final WHERE total = ' '. " BY KALIKA
" end change by kalika
LOOP AT t_final.
t_temp-vbeln_k = t_final-vbeln_k.
t_temp-vgbel = t_final-vgbel.
t_temp-fkart = t_final-fkart.
t_temp-kunag = t_final-kunag.
APPEND t_temp.
CLEAR t_temp.
ENDLOOP.
SORT t_temp DESCENDING BY vbeln_k .
SORT t_temp BY vgbel.
LOOP AT t_final.
READ TABLE t_temp WITH KEY vgbel = t_final-vgbel.
t_final-vbeln_k = t_temp-vbeln_k.
*---change by amit for validating migi date by amit
if t_final-budat = 0.
t_final-mblnr = ''.
endif.
*---change by amit for validating migi date by amit
MODIFY t_final TRANSPORTING vbeln_k mblnr.
CLEAR t_final.
ENDLOOP.
" start KALIKA 30.06.2007.
"SORT t_final STABLE DESCENDING by fkart fkdat. "plz kalika do not forbid stable even it doent any effect this case but in future when large amount of data in production it will works.
SORT t_final STABLE ASCENDING BY fkart fkdat. "plz kalika do not forbid stable even it doent any effect this case but in future when large amount of data in production it will works.
DATA: l_tabix TYPE sy-tabix. " declare the sy-tabix as local variable
DATA: l_lines TYPE sy-tabix.
DATA: l_index TYPE sy-tabix.
DESCRIBE TABLE t_final LINES l_lines . "The current number of table rows of the internal table itab is determined and is assigned to the data object lin
CHECK l_lines > 1. " check lines are greater than 1
LOOP AT t_final WHERE fkart = 'F8'.
l_tabix = sy-tabix. " assine Index of Internal Tables into local var l_tabix
l_index = l_tabix + 1.
READ TABLE t_final INTO wa_sfinal1 INDEX l_index. " read the temp table with index l_index
IF sy-subrc = 0.
CHECK t_final-vgbel = wa_sfinal1-vgbel AND t_final-knumv NE wa_sfinal1-knumv.
IF sy-subrc = 0.
t_final-w_flag = 'X'.
MODIFY t_final TRANSPORTING w_flag.
ENDIF.
ENDIF.
ENDLOOP.
"DELETE ADJACENT DUPLICATES FROM t_final[] COMPARING fkart
DELETE t_final[] WHERE w_flag = 'X'.
" end KALIKA 30.06.2007.
*--change by amit for performa invoice deletion
DELETE t_final[] WHERE aedat = 0.
ENDFORM. " sub_CAL
* FORM ALV GET DATA FOR NOTIONAL AREA *
FORM alv_get_data .
CLEAR it_fieldcat.
***************** SUPPLYING PLANT
* wa_fieldcat-col_pos = '1'. " ALV O/P COL-1
wa_fieldcat-fieldname = 'VSTEL'.
wa_fieldcat-seltext_m = 'SUPPLYING PLANT'.
wa_fieldcat-just = 'L'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 15.
wa_fieldcat-tabname = 'T_FINAL'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
***************** SUPPLYING PLANT
* wa_fieldcat-col_pos = '2'. " ALV O/P COL-1
wa_fieldcat-fieldname = 'NAME1'.
wa_fieldcat-seltext_m = 'SUPP PLANT DESCRTN'.
wa_fieldcat-just = 'L'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 20.
wa_fieldcat-tabname = 'T_FINAL'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
******************** RECEIVING PLANT
* wa_fieldcat-col_pos = '3'. " ALV O/P COL-2
wa_fieldcat-fieldname = 'KUNAG'.
wa_fieldcat-seltext_m = 'RECEIVING PLANT'.
wa_fieldcat-just = 'L'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
******************** RECEIVING PLANT
* wa_fieldcat-col_pos = '4'. " ALV O/P COL-2
wa_fieldcat-fieldname = 'NAME21'.
wa_fieldcat-seltext_m = 'RECE PLNT DESCRTN'.
wa_fieldcat-just = 'L'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
***************** BILL NUMBER
* wa_fieldcat-col_pos = '5'. " ALV O/P COL-3
wa_fieldcat-fieldname = 'VBELN_K'.
wa_fieldcat-seltext_m = 'BILL NUMBER'.
wa_fieldcat-just = 'L'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
*******************BILL DATE
* wa_fieldcat-col_pos = '6'. " ALV O/P COL-4
wa_fieldcat-fieldname = 'FKDAT'.
wa_fieldcat-seltext_m = 'BILL DATE'.
wa_fieldcat-just = 'L'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
*********** OUT BOUND DELIVERY NO
* wa_fieldcat-col_pos = '7'. " ALV O/P COL-5
wa_fieldcat-fieldname = 'VGBEL'.
wa_fieldcat-seltext_m = 'OUT BOUND DELIVERY NO'.
wa_fieldcat-just = 'L'.
* wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-tabname = 'T_FINAL'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
*********** OUT BOUND DELIVERY DATE
** wa_fieldcat-col_pos = '8'. " ALV O/P COL-6
* wa_fieldcat-fieldname = 'LFDAT'.
* wa_fieldcat-seltext_m = 'OUT BOUND DELIVERY DATE'.
* wa_fieldcat-just = 'L'.
* wa_fieldcat-tabname = 'T_FINAL'.
* wa_fieldcat-outputlen = 15.
* APPEND wa_fieldcat TO it_fieldcat.
* CLEAR wa_fieldcat.
" * wa_fieldcat-col_pos = '8'. " ALV O/P COL-6
wa_fieldcat-fieldname = 'BLDAT'.
wa_fieldcat-seltext_m = 'DELIVERY DOC DATE'. " NEW CHANGE
wa_fieldcat-just = 'L'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
************* S.T.O. NO.
* wa_fieldcat-col_pos = '9'. " ALV O/P COL-6
wa_fieldcat-fieldname = 'AUBEL'.
wa_fieldcat-seltext_m = 'S.T.O. NO.'.
wa_fieldcat-just = 'L'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
*********** S.T.O. DATE
* wa_fieldcat-col_pos = '10'. " ALV O/P COL-6
wa_fieldcat-fieldname = 'AEDAT'.
wa_fieldcat-seltext_m = 'S.T.O. DATE'.
wa_fieldcat-just = 'L'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
************ DIVISION
* wa_fieldcat-col_pos = '11'. " ALV O/P COL-7
wa_fieldcat-fieldname = 'SPART'.
wa_fieldcat-seltext_m = 'DIVISION'.
wa_fieldcat-just = 'L'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
********** MATERIAL CODE
* wa_fieldcat-col_pos = '12'. " ALV O/P COL-9
wa_fieldcat-fieldname = 'MATNR'.
wa_fieldcat-seltext_m = 'MATERIAL CODE'.
wa_fieldcat-just = 'L'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-outputlen = 20.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
************ DESCRIPTION
* wa_fieldcat-col_pos = '13'. " ALV O/P COL-10
wa_fieldcat-fieldname = 'ARKTX'.
wa_fieldcat-seltext_m = 'DESCRIPTION'.
wa_fieldcat-just = 'R'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
**************MATERIAL TYPE
* wa_fieldcat-col_pos = '14'. " ALV O/P COL-11
wa_fieldcat-fieldname = 'MTART'.
wa_fieldcat-seltext_m = 'MATERIAL TYPE'.
wa_fieldcat-just = 'R'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
************MATERIAL GROUP
* wa_fieldcat-col_pos = '15'. " ALV O/P COL-13
wa_fieldcat-fieldname = 'MATKL'.
wa_fieldcat-seltext_m = 'MATERIAL GROUP'.
wa_fieldcat-just = 'R'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
*******************modification additioon of chapter ID 30.04.2007
******************chapterID
* wa_fieldcat-col_pos = '32'. " ALV O/P COL-27'.
wa_fieldcat-fieldname = 'J_1ICHID'.
wa_fieldcat-seltext_m = 'CHAPTER-ID'.
wa_fieldcat-just = 'R'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
* wa_fieldcat-col_pos = '33'. " ALV O/P COL-27'.
wa_fieldcat-fieldname = 'EXNUM'.
wa_fieldcat-seltext_m = 'EXCISE DOC.NO.'.
wa_fieldcat-just = 'R'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
* wa_fieldcat-col_pos = '34'. " ALV O/P COL-27'.
wa_fieldcat-fieldname = 'EXDAT'.
wa_fieldcat-seltext_m = 'EXCISE DOC.DATE'.
wa_fieldcat-just = 'R'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
***************end of modification additioon of chapter ID 30.04.2007
*********SUB GROUP
* wa_fieldcat-col_pos = '16'. " ALV O/P COL-13
wa_fieldcat-fieldname = 'MVGR1'.
wa_fieldcat-seltext_m = 'SUB GROUP'.
wa_fieldcat-just = 'R'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
* wa_fieldcat-col_pos = '16'. " ALV O/P COL-13
wa_fieldcat-fieldname = 'BEZIE'.
wa_fieldcat-seltext_m = 'SUB GROUP DISCRP'.
wa_fieldcat-just = 'R'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
***************GROUP DISCRIPTION
* wa_fieldcat-col_pos = '17'. " ALV O/P COL-14
wa_fieldcat-fieldname = 'WGBEZ'.
wa_fieldcat-seltext_m = 'GROUP DISCRIPTION'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-just = 'R'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
*****************FINISH
* wa_fieldcat-col_pos = '18'. " ALV O/P COL-15
wa_fieldcat-fieldname = 'WRKST'.
wa_fieldcat-seltext_m = 'FINISH'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-just = 'R'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
*****************sale u o m
* wa_fieldcat-col_pos = '19'. " ALV O/P COL-15
wa_fieldcat-fieldname = 'VRKME'.
wa_fieldcat-seltext_m = 'SALE U O M'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-just = 'R'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
*****************BASE u o m
* wa_fieldcat-col_pos = '19'. " ALV O/P COL-15
wa_fieldcat-fieldname = 'MEINS'.
wa_fieldcat-seltext_m = 'BASE U O M'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-just = 'R'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
**************DESIGN NO.
* wa_fieldcat-col_pos = '20'. " ALV O/P COL-17
wa_fieldcat-fieldname = 'EXTWG'.
wa_fieldcat-seltext_m = 'DESIGN NO.'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-just = 'R'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
*****************CATEGORY
* wa_fieldcat-col_pos = '21'. " ALV O/P COL-18
wa_fieldcat-fieldname = 'LABOR'.
wa_fieldcat-seltext_m = 'CATEGORY'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-just = 'R'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
**************THICKNESS
* wa_fieldcat-col_pos = '22'. " ALV O/P COL-19.
wa_fieldcat-fieldname = 'NORMT'.
wa_fieldcat-seltext_m = 'THICKNESS'.
wa_fieldcat-just = 'R'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
**************SIZE
* wa_fieldcat-col_pos = '23'. " ALV O/P COL-20.
wa_fieldcat-fieldname = 'BISMT'.
wa_fieldcat-seltext_m = 'SIZE'.
wa_fieldcat-just = 'R'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
****************BILLED QTY
* wa_fieldcat-col_pos = '24'. " ALV O/P COL-21.
wa_fieldcat-fieldname = 'FKIMG'.
wa_fieldcat-seltext_m = 'BILLED QTY'.
wa_fieldcat-just = 'R'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
**************RETE
* wa_fieldcat-col_pos = '26'. " ALV O/P COL-21.
wa_fieldcat-fieldname = 'BOM'.
wa_fieldcat-seltext_m = 'CONVERSION RATE'.
wa_fieldcat-just = 'R'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
******************MULT
* wa_fieldcat-col_pos = '32'. " ALV O/P COL-27'.
wa_fieldcat-fieldname = 'MULT'.
wa_fieldcat-seltext_m = 'BILLED QTY IN BUM'.
wa_fieldcat-just = 'R'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
**************RETE
* wa_fieldcat-col_pos = '25'. " ALV O/P COL-21.
wa_fieldcat-fieldname = 'KBETR'.
wa_fieldcat-seltext_m = 'RATE / BASE UOM'.
wa_fieldcat-just = 'R'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
**************ASSESSIBLE VALUE
* wa_fieldcat-col_pos = '27'. " ALV O/P COL-22.
wa_fieldcat-fieldname = 'KWERT1'.
wa_fieldcat-seltext_m = 'ASSESSIBLE VALUE'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-just = 'R'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
****************EXCISE
* wa_fieldcat-col_pos = '28'. " ALV O/P COL-23.
wa_fieldcat-fieldname = 'KWERT2'.
wa_fieldcat-seltext_m = 'EXCISE'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-just = 'R'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
*****************CESS
* wa_fieldcat-col_pos = '29'. " ALV O/P COL-24.
wa_fieldcat-fieldname = 'KWERT3'.
wa_fieldcat-seltext_m = 'CESS'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-just = 'R'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
******************ROUNDING
* wa_fieldcat-col_pos = '30'. " ALV O/P COL-26.
wa_fieldcat-fieldname = 'KWERT4'.
wa_fieldcat-seltext_m = 'ROUNDING'.
wa_fieldcat-just = 'R'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
******************TOTAL
* wa_fieldcat-col_pos = '31'. " ALV O/P COL-27'.
wa_fieldcat-fieldname = 'TOTAL'.
wa_fieldcat-seltext_m = 'TOTAL'.
wa_fieldcat-just = 'R'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'AREA'.
wa_fieldcat-seltext_m = 'NA'.
wa_fieldcat-just = 'R'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'MBLNR'.
wa_fieldcat-seltext_m = 'MIGO NO'.
wa_fieldcat-just = 'R'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'BUDAT'.
wa_fieldcat-seltext_m = 'MIGO DATE'.
wa_fieldcat-just = 'R'.
wa_fieldcat-tabname = 'T_FINAL'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
ENDFORM. " ALV_GET_DATA
* FORM ALV_GRID *
FORM alv_grid .
PERFORM fill_list_header USING it_top_of_page[].
PERFORM event-build USING gt_events[].
PERFORM fill_layout USING ls_layout.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
is_layout = ls_layout
it_fieldcat = it_fieldcat
it_events = gt_events[]
i_save = 'A'
TABLES
t_outtab -
Use of Sales BOM to force ATP against Bulk Material?
Background:
Our business was recently acquired, and we have migrated to the parent company's R/3 system. In our previous MRP system (R/2), we planned, produced, and shipped a single bulk Material ID in Trucks, Rail Cars, Flexi-Bags, and Iso-Tainers. In the new system, specific Material IDs are now required for each of these modes. However, we do not store the inventory in these modes, nor do we wish to plan at this detailed level.
Considered So Far:
Initial suggestion was to use A.T.O. to look through a BOM and automatically create production orders for each customer order. However, this seems to add additional complexity that we do not really need, and makes changing order dates more challenging (have to move both the order and the accompanying Prod. Order).
Desired Outcome:
Order is entered and priced based upon the mode-specific Material ID, but inventory is relieved from the Bulk material. In our previous R/2 system, there was a field on the material master called "Std.Prod." which stood for Standard Product Link. We used it for synonymous products where we produced and inventoried under one name, but sold under several different names. The customer materials were set up as type SALE and referenced the inventoried material, set as type FINI, in this Std. Prod. field. Thus, at the header level, the user saw the SALE material, but for planning and at the batch level, the system showed the FINI.
Options?
I am told that, due to the amount of custom coding and user exits surrounding outputs and interfaces to EDI and other external systems, the use of Material Determination would require too much testing and potentially too much development work. But, is it the best / correct solution to the problem? Because right now, I don't have the ability to perform ATP against the inventoried Material, so nothing confirms. Would the use of a 1 to 1 Sales BOM offer anything different?
Many Thanks in Advance,
J.P.Hello JP
Material Determination (MD) works with Consignment orders, only you need to assign a MD procedure to the requisite sales document type in config ( TO code OV14). Product substitution, which is a specialized form of MD, makes use of special item cats like TAX and TAPS or TAPA and TAN for main and substitute items respectively, but you can always make copies of them and use them with consignment orders also in conjunction with item category usages like PSHP. PSEL, PSA1 and PSA2. There could be resultant issues, but unless you test you won't know them all.
Your second question about 'Sale would go against the finished good (Truck / Rail material) while the production costs go against the Bulk', brought a new realization in me. You are ordering, pricing and delivering Truck or Rail materials, but those requirements have to be converted to Production orders for bulk material, so from a Sales and Distribution (SD) point of view you don't need anything extra, therefore work with you Production Planning (PP) consultant to convert the requirements at PP end?? May be without resorting to MD or BOMs in Sales, you can work with your PP consultant and with standard config or custom development, you may realize your desired outcome.
Also as long as cost is maintained in the sales Material (Truck for example) with due regard to the additional costs in converting Bulk to truck, you should be fine. Follow the example below:
Standard cost of 1 ton , say X, is stored in Bulk Material master.
Now if there is no additional cost and you just load the bulk material into a truck and if a Truck is 10 ton, then Truck material would have 10X in its material master for cost.
But if there is some other material and/or labor involved in converting bulk to Truck and their cost is y, then you will have (10x+y) in your truck material. Also it is worthwhile to capture the additional cost in the Production/Assembly order via components and operations.
Your problem is not insurmountable, but you need to assemble a team of SD. PP, MM and CO experts to design an integrated solution for you. -
How to get the material list displayed in CU50 transaction into ABAP report
How to get the 'KMAT" type material list displayed in CU50 transaction into ABAP report?
I am getting the entire BOM when i am using the FM CS_BOM_EXPL_MAT_V2 in to the table in the report.
But I want only the material list displayed in CU50.Hi,
Could you please tell us how you found a solution to your problem?
Thanks & regards
Hassan -
Is 543 movement possible for bulk material in subcontracting process.
Dear All,
I created a sub contracting PO, with the bulk material indicator being ticked in MRP 2 view for the parent material.
Now at the time of Making GRN, i can not see the 543 movement for parent item (which is sent to vendor for processing via 541 movement).
Please help. Is this a standard behaviour of the system. ??
Thanking you in anticipation.
Regards,
Chetan.Dear All,
I created a sub contracting PO, with the bulk material indicator being ticked in MRP 2 view for the parent material.
Now at the time of Making GRN, i can not see the 543 movement for parent item (which is sent to vendor for processing via 541 movement).
Please help. Is this a standard behaviour of the system. ??
Thanking you in anticipation.
Regards,
Chetan. -
Material List with ABC indicator
Hi,
I want the Material List with ABC indicator with Monthly Consumption.
How can I capture that data.. Any Transaction in SAP.
Thanks..Hi
Run the tcode MC40,with necessary input parameters.
Inside the report you will be seeing the list of materials with their old as well as new ABC indicators .Now select the material and click on the double-line item .Here u can see the consumption quantity and value for the input period
Regards
Sandeep -
Material listing by plant wise
Hi Kings,
I want to do material listing by plant wise where can i do customization for this this or i have to do any master data mantainance .
please help me out very argent
thanks,hi,
U can try this
Ur requirement can fulfilled by using combination of fields in condition table of Listing/exclusion
menu path:
Spro-> img>SD-> basic function -
> listing/exclusion->Maintain condition tables for listing/exclusion--> table 003
This table u have to assign to the access sequence. Then this access sequence u assign it to the condition type which is maintainesd in the <b>Procedures for maintaining listing/exclusion</b>
Now try with VB01, then listing/ exclusion for the customer happens at plant
hope this helps u
regards,
Arun prasad -
Material List Report by Sales Organization
Hello Gurus,
Does anybody knows if there is a Material List Report by Sales Organization?
I try to generate a Material List Report filter by Sales Organization.
Please I will appreciate your help.
Regards,
HectorHi,
Just extended from above suggestion
Go to Se16 transaction code put table as MKVE.
Give ur sales org and generate a report.
Thanks
suresh -
Hide Back Flush Indicator and Bulk Material Indicator in PM order
Hi Experts
Can any one help me, how to hide or display Back Flush and Bulk Material Indicator in PM order Components tab. Can we customize this or we need to do the modification in standard program.
Thanks is advance
Regards
N.SaidasanTry to hide it my using transaction variant tcode SHD0
If it dosent work then use
User exit
IWO10009 Maintenance order: Customer check for "Saving"
PPCO0023 (check changes to order components)
BADI
IWO1_ORDER_BADI
This will solve your problem -
Material list layout need to be changed in Process Order
Hi All,
I am using 4.6 B , here I want to change the process order material list layout .In the later version (4.7 & ECC 5.0) I could able to find the option 'Change Layout' in the process order itself. Incase of 4.6B no such like option found .So could anyone know me where shoud I can change the layout .
Particulary I need to change the sequence of columns in layout.
Thanks in advance.
AnilHi Amit,
I have tried the option already , but could not able to alter the sequence of the fields apart from the hiding of fields .I required to alter into customer defined sequence of fields in the layout , so would appreciate your suggestions on this .
Thanks
Anil -
Material list Profit center wise
Dear all,
I want to know material list report.which include profit center also
Regards
AmitIt s simple to get that using SE16n..
Enter table MARC.. PRCTR is the field for profit cener.. Enter ur prof center and execute..you ll get the list of matreials under the profit center
ALso check ke5z... -
Procedure for material listing
Hello all,
When I use the following customizing : "Sales and Distribution > Basic Functions > Listing/Exclusion > Activate listing/exclusion by sales document type"
There is a setting called "procedure for material listing" (3rd column) that determines how the system reacts to several listings. The possible values are :
- The first listing in the access sequence is used
A - The last listing in the access sequence is used
B - At least one listing must apply
C - All listings must apply
But I don't understand what is the purpose of these values because, concerning material listings, if there is at least one listing, it is enough to consider the material can be bought. Isn't it?
Also I encounter a bug when I use the first value "- The first listing in the access sequence is used" : the program finds entries for the given customer but within these entries there is none for the given material. Even if the system finds no entry (customer+material), it reacts like if there is one.
Using VA01, when I run the material listing/exclusion analysis, the answer for the following access sequences is "Access not made due to a previous access"...
Thanks in advance if you provide any help about this issue.
Regards,
Francois.up
-
Hi Friends,
I need material list which have been maintained under the perticular class,pls guide me any t-code or from which table it's possible..
Regards
HariDaer Hari,
Enter the Material number + 00000 in table KSSK for selection "Object" until the object = 18digit , enter the material class.Also you can get the value from AUSP, enter the object = 00000+material number until 18digit.
From KSSK you find The Int.Class No , enter it to the KLAH table as Int.Class No, There you''ll find class number.
Try it.
Regards,
w1n
Maybe you are looking for
-
Error Running a Page in Jdeveloper through VPN
I am having an issue running a Hello World Page in JDeveloper9i through VPN. When I try to run a page, web browser is trying to open the page based on the Host Name or IP Address used to refer to Embedded OC4J. It would be really great if you could h
-
System: Oracle 8i on HP-UX, Forms 6i on WINNT. Imagine a Forms app which contains a tree with all accessible forms applications. Each item is related to a command line which is stored in the database and executed when the item is doubleclicked. This
-
Identifying the target system using FM extraction in a Generic Datasource
Hi all, We are using a Generic datasource using FM for extraction from R/3 system to BW system. This Function module picks data from a Z table! After each successful delta extraction from the table, a flag field is set to identify whether the data is
-
as per the question above. youtube videos, whether on youtube or on FB, do not show, just a black unmoving screen. When i disable all (just some does not work, it appears) the addons the problem is solved. Issue is, i would like to keep the addons an
-
Help perfecting Customised Spry 2.0 Menu
Hi there. My Spry 2.0 menus look and behave great in IE, Firefox and Chrome but not in IOS (require 2 taps to bring down and the content is not hidden as the page is loaded). Also, they don't sit properly in their containers in design view (they look