Bulk Printing on Windows 7 64 bit

Hi
My Name is Terrick and i am a computer Operator for the cold chain.
We recently gave new Windows 7 64 bit machines to our user's, and since the new machines have been installed our user's cannot do bulk printing.
They are Bulk printing TIFF format files.
They can print a maximum of 30 jobs, and cant go further than 40.
I increased the Virtual memory so that the machine can locate more memory to the printing client but that failed.
Installed 64 bit printer drivers which are compatible for the systems but that also is not coming right.
My last option was to get software that could convert the TIFF Files to PDF, and with that all seems fine.
So the issue is basically printing this format of images.
Can someone advise please.

Please try the following link for a solution and let me know if it works.
http://social.technet.microsoft.com/Forums/windows/en-US/d212762e-d64c-438e-b647-ab7c61ff61a0/explorer-crashes-when-rightclick-printing-selected-images-as-contact-sheet?forum=w7itprogeneral
Thanks

Similar Messages

HP Laserjet p2015d auto duplex printing with Windows 7 64 bit operating system

I have used the HP Laserjet p2015d with Windows 7 32 bit operating system and have been able to use the AUTOMATIC DUPLEX feature of the printer without problems.
Now, however, I have installed the 64 bit version of Windows 7 operating system and the AUTO DUPLEX does not work and is not shown as being available on the PROPERTIES menu of the printer.
Is it possible to use the AUTO DUPLEX feature of the printer with Windows 7 64 bit operating system.
All replies welcomed! Aaron in Calif.

Hi Aaron,
Make sure the Automatic Duplexing option is enabled:
Enter Control Panel > Devices and Printers.
Right click the printer icon, then click Printer Properties.
Click the Device Settings tab.
Set the Automatic Two-Sided Duplex Accessory as installed and click OK to save the change.
Now Automatic Duplexing should become available.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to install the HP 1010 laserjet printer in windows 7 (64 bit) os pc?

I have windows 7 (64 bit) OS pc and i bought HP laserjet 1010 printer very early when i used to use windows XP. Now i got problem. I cannot find its driver for windows7 even you said that the is no driver for windows7. Then what should i do? My printer may be useless. I cannot change the OS of my pc as i am friendly with windows7. Please help me in this regard.

Hi,
just found your post...
To install your HP1010 on Win7do the following:
Start
Devices & Printers
Add a printer
Adda local printer
Use an existing port: DOT4_001 (Generic IEEE...)
Next
Pick HP from manufacturer
Select HP LaserJet 3055 PCL5
Next
Name the printer something to your liking
Finish (or so, just follow the prompts)
Here you are!
Works every time for me, never had a problem from any application.
I don't know how this forum works and if i am notified if you reply or anyone else posts on this thread, so i try to check it again soon to check if you left a message. Be with me...
Matt

Trouble installing shared printer on windows 7 64 bit

hey guys
i recently got a IBM thinkpad with Windows 7 Professional 64 bit.
we have a HP Laserjet 3015 thats shared on windows xp profesional computer. i am having trouble installing it on my comuter. if i connect the printer to my computer via USB, windows finds the drivers and it works.
The problem is when ever i try and insatll it over the network it does not work. i can search and find which computer it is attached to and see it in the shared printer list, but when i ever i try to connect to it says connecting>>searching windows update>>cant find drivers. it gives me the option of searching for the drivers to install. i have downloaded the drivers thats on the HP site but they dont help. when ever i select them in the manual it comes with an error saying driver not found then gives u the option of installing it your self. when u select the driver it says windows can not locate a suitable driver.
how can i get around this ??
This question was solved.
View Solution.

rory2g wrote:
i recently got a IBM thinkpad with Windows 7 Professional 64 bit.
we have a HP Laserjet 3015 thats shared on windows xp profesional computer. i am having trouble installing it on my comuter. if i connect the printer to my computer via USB, windows finds the drivers and it works.
The problem is when ever i try and insatll it over the network it does not work. i can search and find which computer it is attached to and see it in the shared printer list, but when i ever i try to connect to it says connecting>>searching windows update>>cant find drivers. it gives me the option of searching for the drivers to install. i have downloaded the drivers thats on the HP site but they dont help. when ever i select them in the manual it comes with an error saying driver not found then gives u the option of installing it your self. when u select the driver it says windows can not locate a suitable driver.
Try the following: On the Windows 7 computer go to the Devices and Printers folder, Add a Printer, Local Printer, Create a new port, Local port, Next, \\xpcomputername\lj3015 (where you put in the actual share name of the computer and printer), OK, Windows Update (and wait for the list to repopulate), HP Laserjet 3015 PCL5, Next, Next.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Software download for hp 7000 printer on windows 7 64-bit does not complete

Hi HP. I was asked to download a full software for this printer hp 7000wide format on windows 7 64-bit, this i try to do with this file download- H8t5ubCr.part. It downloaded 183 MB out of 219 MB with this message PART thus the file cant open. What can i do to continue with my download or to open the file. And, is it possible for me to have just the software excluding driver as i already have the driver installed on my system. Pst. Copeland

Hi,
Follow the insntallation again till the license agreement step.
Click the 2nd link - Internet connection Usage Settings and select No, Thanks for botht of the listed options.
Confirm the changes, accept the terms and proceed with the installation which should go further that step now.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I desperately need help installing Canon Pixma ip6000D printer in Windows 7 64-bit

My software CD (drivers, etc.) will not work with Windows 7 64-bit. I have tried running it in Windows XP compatibility mode, but it says it is made for 32-bit and will not work with 64-bit. Canon's website says it has an add-on module, but it doesn't have
the printer driver, and it says "Your printer must be installed via Microsoft Update before you download and use this module." I have tried to find a way to install the printer via Microsoft Update, But I can't find any information
about how to do this.
I have also done searches for the canon pixma ip6000d drivers for windows 7 64-bit, but all the results I have seen say that they are an add-on modules.
I would GREATLY appreciate any help with this.

After doing some more digging, I found a solution, and hopefully it will help anyone else who is having problems. Go to this page:
http://windows.microsoft.com/en-US/windows7/Install-a-printer
You can manually install the printer by following these instructions. If the model of your printer does not show (mine didn't), click the update button. It will take several minutes (maybe longer if you have a slow internet connection), but eventually it
will bring up a new list of printers. Just choose your printer and follow the instructions. My printer is working fine now.

WPS54GU2 printing to parallel printer with Windows 7 64-bit-cannot get it to work for the life of me

Hello,
I am having the worst difficulties getting the WPS54GU2 to print to a HP Laserjet 4L printer. I know that the general communication is working as I am able to print a test page from the
I have the IP address correct for the print server (in my case it is 192.168.1.103) and is set statically in the print server setup.
I have it working fine on an XP box The port name configured on the XP machine is LK89A0B5_P1.
The software that comes with the WPS print server will not install on Windows 7 so the address/port/queue must
be set up manually.
I have tried the link from Cisco's KB that shows how to configure the print sever:
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=69efd80e2ea44d948fea2365d3e0c9eb_Configuring_TCP_I...
however this does not work and the print job either gets stuck in the print queue, or it shows busy/error in the print queue.
I have also tried suggestions on this forum that say not to create a TCP/IP port but instead use LPR port.
Can someone please give me the solution that will work. I have heard people say to use L1 for the queue name, or P1, or LP1
or lp1. I cannot spend much more time on this before I give up and look for a different print server that will work with both parallel and USB printers.
Thanks for help/suggestions on this.
Mike

sometimes it needs the device- specific drivers to get it to work; especially that you have a 64- bit OS.
the print server is already connected to the network, right? what is its IP address? check if the computer can ping that IP by going to start> search> cmd> ping 192.168.1.78 (change this to the correct IP address). if your computer can ping the print server then you can setup LPR printing to get your printing jobs done. click on the link below for more info.
Setting up LPR Printing on Windows 7

Networking a HP color laserjet 2600n printer on windows 7 (64-bit)?

Hello,
Have an HP Color Laserjet 2600n printer and are running Microsoft Windows 7 (64-bit). I installed >> HP Color LaserJet 2600n Plug and Play Package off of HP website [ http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=446154&p... ]. The drivers work fine if you connect via USB port but unfortunately there's no way to connect via network. Can anyone give me guidance on how to connect the 2006n via a network on windows 7 (64-bit)?
Thanks
This question was solved.
View Solution.

Have you plugged the printer into your router and does it have a proper IP address? If so:
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing.
2. Click >> Start >> Control panel >> Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Choose NO.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Designjet 500 doesn't print from Windows 7 64 bits

The problem:
We got our first Windows 7 64 bit laptop and we can't print to our Designjet 500. Windows submits the job to the printer without errors but it doesn't print and the error 61:05 is displayed on the printer's display. The printer is connected to the network infrastructure with HP Jetdirect.
Things I tried:
I tried to connect this laptop directly to the printer through USB.
I tried to print from Autocad and the Windows test page.
I tried the Windows Update drivers and the ones provided in HP's support website.
I tried all the different flavors of the Windows 7 64 bit drivers (w/ HPGL2 card; PS; Plus; 24/42 inches)
I tried to print from a 2nd W7 x64 laptop that I got temporarily just to troubleshoot this issue.
Conclusion:
All 32 bit OS's print as expected. None of the new W7 64 bit systems print. None of the things I tried made a difference, the job is sent to the printer and the error is always the same.
Any ideas to go on from here?

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP Designjet forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Cannot share window xp 32-bit hp c5500 printer with windows 7 64-bit laptop

I am trying to connect my HP laptop running windows 7 64-bit with the home network printer hp Photosmart C5500 running on desktop windows XP 32-Bit, but could not get it working. It shows up in the printer control panel.

Do you receive any errors?
Also, have you installed the Windows 7 64bit drivers on your Windows 7 system?
How specifically was the printer added to the Windows 7 system? Was it through automatic discovery or was it browsed for manually?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

What RAM is needed for Laserjet Printer CP1525nw Windows 7 64-bit

What RAM is needed for Laserjet Printer CP1525nw Windows 7 64-bit

Hi,
just found your post...
To install your HP1010 on Win7do the following:
Start
Devices & Printers
Add a printer
Adda local printer
Use an existing port: DOT4_001 (Generic IEEE...)
Next
Pick HP from manufacturer
Select HP LaserJet 3055 PCL5
Next
Name the printer something to your liking
Finish (or so, just follow the prompts)
Here you are!
Works every time for me, never had a problem from any application.
I don't know how this forum works and if i am notified if you reply or anyone else posts on this thread, so i try to check it again soon to check if you left a message. Be with me...
Matt

Deskjet printer for Windows 7 64 bit

I have a laptop loaded with OS Windows 7 Home edition 64 bits. Can I use any HP Deskjet Printer like DJ100 , D2600 etc ? Please respond so that I can buy immediately

Hi,
No Windows 7 support for DJ 100:
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=82208&locale=en_us&ta...
You can use drivers from the following link for the D2600 and install to your Windows 7 machine:
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3742935&cc=mx&taskId=...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP 1012 printer with Windows 7 64-bit

Looking for HP 1012 printer driver for Windows 7?
You, like me, tried to install the HP 1012 printer onto a computer that ran Windows 7, but to no avail.
You need to go to Start --> Devices and Printers --> Add a printer --> Add a local printer --> Select ":Use an existing port: DOT4_001 (Generic IEEE 1284.4 printing support)" --> click Next --> Select HP for manufacturer --> scroll down to HP LaserJet 3055 PCL5. Select this as your printer.
That's it, and make sure it's set as the default printer.
You're welcome

I read that installing the HP LaserJet 3055 PCL5, driver would enable my HP Laserjet 1012. I downloaded the software and followed the directions and the printer gives me "Unsupported Personality PCL" No success. sweet_land04

HP Photosmart D5460 does not print in Windows 7 32-bit

I installed Windows 7, installed the driver suggested from HP (PS_SF_03_D5400_NonNet_Full_Win_WW_130_140.exe), with no problems but when I try to print (e.g. with notepad) the document is self-deleted from the printer-queue.

If you upgraded from Vista, then this patch may help:
HP Print Software Patch When Upgrading Vista to Windows 7
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Printing order windows 7 32 bit

I have a windows 7 32bit computer. I recently purchased a officejet pro 8620 that currently prints last page to first page. I have tried changing the layout order, but that is not an option for me to choose. I tried loading the drive by way of the advanced tab of the properties menu. That did not change anything. Is there a way for me to change this setting or do I need to return my product?

On Windows 7, the page order is set by the app. For example, if you are using word, goto options, and under Print, check the "print pages in reverse order" box. (Note: different versions of word may have slight different wording and different ways to get to the options menu, the same goes for different apps).
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

Bulk Printing on Windows 7 64 bit

Similar Messages

Maybe you are looking for