Bulk processing of applicants from one status to another

Hi experts,
Can any please explain how can we change the status of applicants from one status to another?
ex:
150 applicants status change to "Process"
then change status from "Process" to "offer employement"
then change status from "offer employement to "Prepare to hire"
Regards.

Ajay, thats my point exactly, there are only two options which you can execute for the group of applicants (Reject or put on hold) these do not fulfill the purpose, what i would want is to change status other then (Reject or put on hold) such as, short listed for test, interview, process, etc...
How are these processed? would I have to make an ABAP application for this?? please suggest.
Regards.

Similar Messages

HT4527 I am trying to transfer music files from one PC to another using homeshare and although I can view the music as a shared folder I cannot initiate the "import" process. I have iTunes 11.0.1.12 on both computers so the help screenshots do not help a

I am trying to transfer music files from one PC to another using homeshare and although I can view the music as a shared folder I cannot initiate the "import" process. I have iTunes 11.0.1.12 on both computers so the help screenshots do not help as such

Then stop trying to use HomeShare and use one of the other options listed in the document from which your question was posted.

How can I move my iPhoto Library from one Mac to another without losing the comments on the individual photos in the process?

How can I move my iPhoto Library from one Mac to another without losing the comments on the individual photos in the process? The source Macbook (OS 10.4.11 and iPhoto 6.0.6 (3.2.2.)) is with my husband in Germany, the target MacBook Pro (OS 10.8.5, iPhoto 11) is with me in Japan. Thanks for your help.

I copied the iPhoto Library to a CD and from there to the new MacBook
If you copied the library to the CD via the Finder it would be no different than the methods Terence suggested. If you used the Share ➙ Burn menu option from inside iDVD you'll get a mini library that has to be accessed from the open library and the events/alubums copied into the destination library. Not the same as the other methods.
The Share ➙ Burn method is no longer supported with iPhoto 9 and later.
OT

I am in the process of trying to transfer my iTunes library from one computer to another. Some of the music/film info has been edited (by me) in my library (using get info). When put onto new computer the info has gone back to before i edited it.. Help!?

I am in the process of trying to transfer my iTunes library from one computer to another. Some of the music/film info has been edited (by me) in my library (using get info). When put onto new computer (following apple's instructions- using an external hard drive) the info has gone back to how it was before i edited it.. Help!?

Hello,
I would recommend taking a look at the article below for more information about migrating your iTunes library.
iTunes for Windows: Moving your iTunes Media folder
http://support.apple.com/kb/ht1364
-Griff W.

Process for migrating CMSDK from one server to another

All:
We are in the process of migrating our CMSDK installation and database from one server to another. In doing so, we would like to retain our documents and folders and other custom objects that have been created till date. If there is a recommended migration process that you could point us to, it would be greatly appreciated.
Our initial thought is to:
1. Install the CMSDK server on the target server machine
2. Export source CMSDK schema from source database server
3. Import source CMSDK schema into target database server
Are we on the right track? If so, are there any pitfalls and issues we can expect to encounter. Any information will be very helpful.
Thanks

The utility should help you a lot. The best documentation on how to use the utility is in the 9iFS Setup and Administrators guide (doc number A95995-01) Chapter 8. It pretty much works the same way then as it does now. These are two metalink notes on doing the export/import silently (29928.1 - 177816.1). Doing it silently is very tedious since you having to create numerous .def files and other scripts to run them.
I will look around for any other stuff I have, but the 9iFS document is very good as a reference no matter what version of CMSDK. If you have problems finding it, I can try to send it to you, but it is around 5.6M.

Bulk move users from one group to another in XI 3.1

Hi all,
I have a group that contains approximately 20,000 users. I now need to move around 7,500 of these users into a different group.
How can I do this programatically in bulk as I don't want to go through and manually change the groups of 7,500 users?
Thanks,
Chris

Hi Christian,
Assuming you would need to move users from one group to another and remove them from the previous group, you could use the attached java code.
To run the code, you would need to save it as .jsp file and paste it inside AdminTools application context.
The pre-requisite to run this code is to create a Text file with all the 7500 user names in it. The text file should contain one user per line
(example:
User1
User2
User3
You can get this information from query builder by running the below query
Select top 20000 si_name from ci_systemobjects where si_kind='user'
Initially do it for 2-3 users to text the results.
You would need to edit the jsp and modify these three lines
1.
                * Assign user to a group
               //Query for the group ID
               boQuery = "Select SI_ID From CI_SYSTEMOBJECTS Where SI_KIND='UserGroup' And SI_Name='UserGroup name'";
Above in SI_NAME, you would need to provide the usergroup name you want your users to be added to.
2.
if (boUserInfoObject.getGroups().remove(Group Id from which it has to be removed)) {
                        out.print("User removed from group successfully. ");
Above you would need to provide the id of the group you want the users to be removed from(i.e the current group from where you want them to be moved).
3.
* Path to file containing User names.
final String USER_FILE_PATH = "<Path of txt file from which list of users will be imported>";
Above you need to specify the path of the text file which contains all the user names.
Incase you require further assistance on SDKs, raise your concerns in the below space
http://scn.sap.com/community/bi-platform/java-sdk
Thanks,
Prithvi

Best Way to port the data from one DB to another DB using Biztalk

Hi,
please suggest best way to move the data from one db to another DB using biztalk.
Currently I am doing like that, for each transaction(getting from different source tables) through receive port, and do some mapping (some custom logic for data mapping), then insert to target normalized tables(multiple tables) and back to update the status
of transaction in source table in sourceDB. It is processing one by one.
How/best we we can do it using bulk transfer and update the status. Since it has more than 10000 transaction per call.
Thanks,
Vinoth

Hi Vinoth,
For SQL Bulk inserts you can always use SQL Bulk Load
adapter.
http://www.biztalkgurus.com/biztalk_server/biztalk_blogs/b/biztalksyn/archive/2005/10/23/processing-a-large-flat-file-message-with-biztalk-and-the-sqlbulkinsert-adapter.aspx
However, even though a SQL Bulk Load adapter can efficiently insert a large amount of data into SQL you are still stuck with the issues of transmitting the
MessageBox database and the memory issues of dealing with really large messages.
I would personally suggest you to use SSIS, as you have mentioned that records have to be processed in specific time of day as opposed to when the
records are available.
Please refer to this link to get more information about SSIS: http://msdn.microsoft.com/en-us/library/ms141026.aspx
If you have any more questions related to SSIS, please ask it in
SSIS
forum and you will get specific support.
Rachit

Moving music from one computer to another using an iPod?

Thing is I want to buy a new laptop soon, and I'd like to move my music from my old computer to the new one, but I'd like to use my iPod 160GB as a hard disk to transport it, I've copied my music and video files along with other important data into folders I've created inside the iPod, it covers about a 3rd of the total space in the iPod. Question is, can I transport the music to the new computer without the system resetting the iPod to work with the new computer itself?
Last time(like 3 weeks ago) I had to reset my computer(the old one) because of viruses trouble and such, but I had previously saved my data inside the iPod, so I just copied the files to the same locations as they were in the previous configuration including the iTunes folders library files to a folder I created, then installed iTunes and then the iTunes library files to its own folder; it worked wonders because no files or playlists were lost, and when I plugged my iPod, I had no problems, but I reckoned no problems happened there because this iPod had been used with this computer already, so I wonder if this would be effective with a new computer.
So question remains, could I transport the files(all data) from the iPod to the new computer without it resetting itself and hence losing any of the data?

How to Copy and Move (Clone) your iTunes Library from One Computer to Another – or Archive Prior to a PC Re-Image or Reformat
This well-written iLounge Article is a must-read for anyone considering moving their Library to a new computer or a new location. Or, just wants a better understanding of how iTunes manages your music.
Below is the conceptual framework with related and important links. Apply and adapt it to your specific situation and equipment resources.
The safest, quickest, and most optimal method to move your Library to a new computer is to actually clone the entire ‘iTunes’ folder (directory) structure, rather than just copying just the song files. By copying the entire ‘iTunes’ folder and all sub-folders, you capture not only the music files, but the all-important ‘iTunes Library.itl’ database file (usually located in the ‘iTunes’ folder), which contains all the data about your songs (Playlists, Ratings, Play Counts, Last Played, Date Added, etc). See: What are the iTunes Library files?
Install iTunes on the new computer. Then go back to your old computer and move (copy) the "iTunes" folder which usually resides inside your "…\My Documents\My Music" folder from the old computer to the exact same place (both Drive Letter and complete Path) on the new computer. When you open iTunes on the new computer it will look and behave exactly the same way it did on the old, Play Counts, Ratings, Comments and all!
Preserving and transferring the original Library Database file (iTunes Library.itl) is most critical with iPhones as they can sync with only one iTunes Library at a time. This is managed by the ‘Library Persistent ID’ hardcoded within each iTunes database file. If your ITL file has a different ID, your iTunes/iPhone attachment will be seen as a new Library and you will need to completely re-sync your iPhone. This may or may not be an issue for you. See how to manage the LPID via This Link.
NOTE: It is usually safer moving files between computers with the same version of iTunes!!
iTunes Files to Copy and Move to your New PC (for iPod, iTouch &/or iPhone – use as needed)
1) All Music Files in their current folder structure (usually located in and under the ‘iTunes Music’ folder)
2) All Application Files in their current folder structure (usually located in the ‘Mobile Applications’ folder)
3) All Album Artwork Files in their current folder structure (usually located in and under the ‘Album Artwork’ folder)
4) The Library database file: ‘iTunes Library.itl’ located in the ‘iTunes’ folder
5) The Library XML file: ‘iTunes Music Library.xml’ located in the ‘iTunes’ folder
6) The iTunes Library Extras.itdb and iTunes Library Genius.itdb files, also in the ‘iTunes’ folder
Some additional files to consider also include in a backup:
7) Any XML playlist files created for Playlist retention
8) The two iTunes.pref files (optional)
i) C:\Documents and Settings\<your username>\Application Data\Apple Computer\iTunes\iTunes.pref
ii) C:\Documents and Settings\<your username>\Local Settings\Application Data\Apple Computer Inc\iTunes.pref
9) The XML file of Ratings, Play Counts and Last Played attributes saved from the main Library and created by Otto’s SaveRatings script (also optional, but recommended):
“Download this: http://ottodestruct.com/itunes/SaveRatings.zip . It's a program, just run it like any other program. Run it on the machine where you're copying the info from BEFORE you move the files to the new machine. Click the "Save Ratings" button and it'll create a ratings.xml file. Now when you move the files, move the program and this file as well. Then after you make your new iTunes library, run it again and click the "Restore Ratings" button. Voila, all your information is back in the Library. Well, most of it anyway, it's not perfect. It'll tell you what songs it couldn't figure out though, and there's usually not very many.”
10) The folder(s) used to store and sync photos to your iPhone (if applicable)
11) The iTunes created Backup of your iPhone usually located at:
C:\Documents and Settings\USERNAME\Application Data\Apple Computer\MobileSync\Backup
Here's a list of methods to copy and move your music files from one computer to another:
1) Use an External Hard Drive (ExHD) to move the complete files and Folder structures from one computer to another (my preferred option). You can clone’ the entire ‘iTunes’ folder structure in one very easy step. Also great to have available for complete backups of your Library. External hard drives now run less than $100 for 500GBs-1TB of storage. See This Link
2) Directly connect the two computers:
2a) Connect them through a Router &/or Network
2b) Directly connect using an Ethernet cable: Straight for using at least one Mac; or Crossover for PC/PC Instructions here.
2c) Connect them via a USB-to-USB Network Bridge. Example here. There are various types out there (use Google).
--Then copy the files from one computer to the other.
3) Use the iPod as a transfer device, as this extensive Apple link explains. It will be a bit easier if your iPod has a larger capacity than your music collection, otherwise you will need to perform multiple copy/move transfers. This well written process also works fine while using any other data transfer medium (ExHD, Flash Drive, DVD, CD, Zipp, Jazz, etc.).
4) Burn several DVDs (at 4.7GBs each) with your music data files and folder structure, and load them onto the new computer. Re-writable DVDs are more cost effective (if your DVD drive can manage these types).
5) Burn 6x more on CDs (at 700MB each) than in #4 above and load the files and folders on the new computer. Re-writable CDs are more cost effective (if your CD drive can manage these types).
6) Use a larger USB Flash drive (1GB - 4GB) to move the files and folders. Best if the flash drive is larger than your Library, otherwise you will need multiple copy/move transfers.
These are links to various additional instructions on performing the transfer (read them all, but some listed steps may not be required depending on your specific situation):
Switch from PC to Mac Using the iPod
hudgie: Migrating iTunes for Windows to a new PC
How to copy music between authorized computers
Also, remember to Deauthorize your PC before you reformat it, dispose of it, or retire it from iTMS use (if applicable).
Best of Luck

How to failover SCAN VIP and SCAN Listener from one node to another?

Environment:
O.S : HP-UX B.11.31 U ia64
RDBMS: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
It is a 2 Node RAC.
Question:
How to failover the SCAN VIP and SCAN LISTENER running on node 1 to node 2?
What is the relation between standard LISTENER and SCAN LISTENER ?
Why do we need LISTENER, when we have SCAN LISTENER ?
When I tried with SRCVTL STOP LISTENER , I thought the SCAN LISTENER adn SCAN IP will failover, but it did not?
Also please clarify if I use SRVCTL RELOCATE SCAN -i 1 -n Node1
Actalluy I am trying that by moving the SCAN listeners so that when I do PSU 7 patching on 1 node, no incoming attempt to connect will spawn
a process and thereby opening files in $ORACLE_HOME (which would prevent the patch from occurring)
Please clarify my queries.
Thanks, Sivaprasad.S

Hi Sivaprasad,
1. The following link will help you for SCAN VIP and SCAN LISTENER failover from 1 node to another.
http://heliosguneserol.wordpress.com/2012/10/19/how-to-relocate-scan_listener-from-one-node-to-another-node-on-rac-system/
http://oracledbabay.blogspot.co.uk/2013/05/steps-to-change-scan-ip-address-in.html
2. The Standard LISTENER is specific for particular node for which it is running. It cannot be relocated as its specific for the node its running. SCAN listeners are not replacements for the node listeners.A new set of cluster processes called scan listeners will run on three nodes in a cluster (or all nodes if there are less than 3). If you have more than three nodes, regardless of the number of nodes you have, there will be at most three scan listeners. So no relation for standard LISTENER and SCAN LISTENER.
3. Hmmm. let me put it in easy way for this question. All the RAC services like, asm, db , services, nodeapps registers with this SCAN_LISTENER. So if any of these services (asm, db , services, nodeapps) got down/not running, the SCAN_LISTENER will know the down status, and if any client requests to access the node/service which is down, the SCAN_LISTENER will redirect the client request to the least loaded node. So here all these process will happen without the knowledge of client. And As usual the standard LISTENER looks only for incoming request to connect with the database. So we need both LISTENER and SCAN LISTENER.
4. If you provide SRCVTL STOP LISTENER, it stops the default listener on the specified node_name, or the listeners represented in a given list of listener names, that are registered with Oracle Clusterware on the given node. No failover will happen under this case.
5. Yes you can relocate if you want to relocate the scan.
Hope this helps!!
Regards,
Pradeep. V

How to convert data when transferring from one table to another

I have two tables and these are the structure of the tables
create table E1(
ID NUMBER
,NAME VARCHAR2(30)
, DESIGNATION VARCHAR2(30)
,GENDER VARCHAR2(10));
create table E2(
ID NUMBER
,NAME VARCHAR2(30)
, DESIGNATION VARCHAR2(3)
,GENDER NUMBER); Now I want to transfer records from one table to another using a master tables where data are compared because the datatypes in tables are different
The first one is a gender table to match the gender and convert
create table Gender(
E1 varchar2(10),
E2 number);The second is for the designation
create table Designation(
E1 varchar2(30),
E2 varchar2(3);How to match and convert the data so that it can be transfered.

Peeyush wrote:
Can we do it with the help of a cursor.
All SQL executed by the database are parsed as cursors and executed as cursors.
I mean I have to insert data in bulk and I want to use cursor for it.The read and write (select and insert) are done by the SQL engine. The read part reads data and passes it to the write part that inserts the data.
Now why would using PL/SQL and bulk processing make this faster? It will reside in-between the read part and the write part being done by the SQL engine.
So the SQL engine reads the data. This then travels all the way to the PL/SQL engine as a bulk collect. PL./SQL then issues an insert (the write part to be done by the SQL engine). And now this very same data travels all the way from the PL/SQL engine to the SQL engine for insertion.
So just how is this approach, where you add extra travel time to data, faster?
and i want to commit the transaction after every 50 recordsWhy? What makes you think this is better? What makes you think you have a problem with not committing every 50 rows?

How to handle the date attribute,passing parameter from one page to another

hi Friends,
i want to pass data attribute from one page to another page-
i am passing like below ,in jdev log window i am getting below error.
String StatusUpdateDate = row.getAttribute("StatusUpdateDate");
params.put("StatusUpdateDate",StatusUpdateDate)
Error(121,50): incompatible types; found: java.lang.Object, required: java.lang.String
Suppose i am passing like below , while moving one page to another i am getting below error in application
String StatusUpdateDate = row.getAttribute("StatusUpdateDate").toString()
Status Update Date - JBO-25009: Cannot create an object of type:oracle.jbo.domain.Date with value:26-MAR-2009
please can any suggest me how to handle this error.
Thanks and Regards,
vamshi

Hi Pratap, Thanks for your help
it was my mistake that previously property it was varchar2, now i have changed as you suggested every thing. still i am getting error. this is my code-
AM CODE-
public void xxselection(String Name, String Email,String Product,String Region, DATE StatusUpdateDate)
DetailVOImpl vo1=getDetailVO1();
vo1.initQuery2(Name);
Row detailRow = vo1.createRow();
detailRow.setAttribute("Name", Name);
detailRow.setAttribute("Email", Email);
detailRow.setAttribute("Product", Product);
detailRow.setAttribute("Region", Region);
detailRow.setAttribute("StatusUpdateDate", StatusUpdateDate);
vo1.last();
vo1.next();
vo1.insertRow(detailRow);
detailRow.setNewRowState(Row.STATUS_INITIALIZED);
Controller- Process Form Request- Source page
if (pageContext.getParameter("Detail")!= null)
String Name=row.getAttribute("Name").toString();
String Email=row.getAttribute("Email").toString();
String Product=row.getAttribute("Product").toString();
String Region=row.getAttribute("Region").toString();
DATE StatusUpdateDate =(DATE)row.getAttribute("StatusUpdateDate");
HashMap params =new HashMap();
params.put(" Name", Name);
params.put("Email",Email);
params.put("Product",Product);
params.put("Region",Region);
pageContext.putTransactionTransientValue("StatusUpdateDate",StatusUpdateDate); //As you suggested
pageContext.forwardImmediately("OA.jsp?page=/xxm/oracle/apps/pos/stg/webui/DetailStagePG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
params,
true, // retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_NO);
another page Controller-Process request-Destination page-
String Name = pageContext.getParameter("Name");
String Email = pageContext.getParameter(" Email");
String Product = pageContext.getParameter("Product");
String Region = pageContext.getParameter("Region");
DATE StatusUpdateDate=(DATE)pageContext.getTransactionTransientValue("StatusUpdateDate");
Timestamp tstmpStatusDate=StatusUpdateDate.timestampValue();
System.out.println("tstmpStatusDate"+tstmpStatusDate);
Serializable[] parameters1 = {Name,Email,Product,Region,tstmpStatusDate};
am.invokeMethod("xxselection", parameters1);
Error - getting at while running the application page to page
No method with signature - No method with signature - xxselection(class java.lang.String, class java.lang.String, class java.lang.String, class java.lang.String, class java.lang.String)
every thing is getting passed except DATE Attribute, please check the code and update me
Thanks in Advace-
vamshi

How do I move ITunes from one computer to another

I am trying to move my ITunes from one computer to another. I downloaded ITunes on my new computer and loged in with my account information. Then I pluged my IPod into the comuter and imported all my songs. I thought that everything would come over but none of my apps did. I want to synce my IPod up with my new computer how do I do it?

Backup everything to an external hard drive with this User Tip.
Use the same process to clone the library into a new empty iTunes folder on the new computer.
Deauthorise the old box if you don't need to access protected content on it any more.
Use SyncToy from time to time, and in particular before every iTunes update, to keep the backup up-to-date.
tt2

How to transfer adobe acrobat XI registration from one desktop to another (bought new PC).

how do you transfer adobe acrobat XI registration from one desktop to another (bought new PC). Need to use ASAP!

Hi jaanders2,
The licensing agreement allows you to activate Acrobat on up to two computers. So, if you've only activated in your old computer, you simply need to install and activate Acrobat on the second computer. If you no longer have the installer file or installation media, you can download Acrobat from here: Download Acrobat products | Standard, Pro | XI, X - Adobe
If you need your serial number, this document will help you track it down: Find your serial number quickly - Adobe
And this document, will walk you through the activation process: Activation & Deactivation Help
Please let us know if you need additional help.
Best,
Sara

Copying value from one cursor to another

Hi,
I have a problem while copying values from one cursor to another cursor.
The code looks like below.
PROCEDURE XYZ
            TransactionResultSet OUT NOCOPY types.ref_cursor,
IS
            temp_cursor types.ref_cursor;
            wip_rec types.ref_cursor;
BEGIN
DECLARE
                CURSOR temp_cursor IS
            SELECT ...........
END;
BEGIN
    FOR wip_rec IN temp_cursor
    LOOP
    update tinsagr set something
    where {the condition}
        IF SQL%ROWCOUNT = 0 THEN
dbms_output.put_line('this is test ');
        Fetch wip_rec into TransactionResultSet;
     END IF;
   END LOOP;so basically i want to iterate the "temp_cursor" and depending on the values i get it from here i shall update a table. Actually i want to exclude few records from "temp_cursor" and add it/copy rest of the records to "TransactionResultSet"
That means say initially " temp_cursor" has 100 records and i updated 5 records in a table and same number of records should be excluded and rest should be added to the output cursor TransactionResultSet.
How do i achieve it?
while saving i am getting
(1): PLS-00456: item 'WIP_REC' is not a cursor.
Do any one has any idea what to do in such scenario?

There are options like....
SQL> CREATE OR REPLACE TYPE emp_obj AS OBJECT (ename VARCHAR2(50), dept NUMBER);
2 /
Type created.
SQL> CREATE OR REPLACE TYPE emp_tbl IS TABLE OF emp_obj;
2 /
Type created.
SQL> set serverou on
SP2-0158: unknown SET option "serverou"
SQL> set serverout on
SQL> DECLARE
2    rc      sys_refcursor;
3    v_ename emp.ename%TYPE;
4    v_dept emp.deptno%TYPE;
5    ---End Of Local Varriable Declaration
6    --Procedire declaration !
7    PROCEDURE TEST_CUR(pi_out_ref_cur IN OUT sys_refcursor) IS
8      emp_rec emp_tbl;
9    BEGIN
10      /* This BULK COLLECT can be done with explicit cursor,Ref Cursor
11      with some simple modification, Here I have used implicit cursor! */
12      SELECT emp_obj(ename, deptno) --Casting as the object
13      BULK COLLECT
14        INTO emp_rec
15        FROM emp
16       WHERE deptno = 10;
17
18      dbms_output.put_line('Records selected are:');
19      FOR i in 1 .. emp_rec.COUNT LOOP
20        dbms_output.put_line(emp_rec(i).ename || '--' || emp_rec(i).dept);
21      END LOOP;
22      --Now we are filtering the record and may be doing some operation with each record.
23      FOR i in 1 .. emp_rec.COUNT LOOP
24        IF emp_rec(i).ename = 'KING' THEN
25          --You can change this IF according to your need.
26          emp_rec.DELETE(i);
27        END IF;
28      END LOOP;
29      OPEN pi_out_ref_cur FOR
30        SELECT * FROM TABLE(emp_rec); --Using the TYPE AS table.
31    END TEST_CUR;
32    /* Main execution or procedure calling section*/
33 BEGIN
34    --Actual calling
35    TEST_CUR(rc);
36    dbms_output.new_line;
37    dbms_output.put_line('Now in Ref Cursor');
38    dbms_output.put_line('****************');
39    LOOP
40      FETCH rc
41        INTO v_ename, v_dept;
42      dbms_output.put_line(v_ename || '--' || v_dept);
43      EXIT WHEN rc%NOTFOUND;
44    END LOOP;
45
46 END;
47 /
Records selected are:
CLARK--10
KING--10
MILLER--10
Now in Ref Cursor
CLARK--10
MILLER--10
MILLER--10
PL/SQL procedure successfully completed.
SQL>

How can I migrate file shares & permissions from one volume to another on the same server?

I am replacing a storage array and as part of that process, I need to move files/folders and Shares/permissions from one Volume to another volume within the same server.
The server is Windows 2003 file server. The file transfers are not a problem, moving all 40 shares with permissions etc. is my main concern because in order to maintain everything I need to change the drive letter of the new volume to match the old
one so that links to various resources throughout the network do not break.

Hi,
If you want to copy files/folders from one Volume to another volume within the same server, you could use the File Server Migration Tool (FSMT) or Robocopy to accomplish your goals. The tool can move all of the files from the shares on your original volume
to the new volume.
For more detailed information, you could refer to the articles below:
File Server Migration Toolkit
http://technet.microsoft.com/en-us/magazine/2006.10.utilityspotlight.aspx
The File Server Migration Toolkit (FSMT) is a free download available at:
http://www.microsoft.com/en-us/download/details.aspx?DisplayLang=en&id=10268
Robocopy
http://technet.microsoft.com/en-us/library/cc733145.aspx
FSMT and Robocopy will not copy Share permissions but only NTFS permissions. So if the drive letter will not be changed, you can backup and restore the Share permission with steps here:
Saving and restoring existing Windows shares
http://support.microsoft.com/kb/125996
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Bulk processing of applicants from one status to another

Similar Messages

Maybe you are looking for