Bulk uploading the Pick List Values

Hi,
I have to create a cascading for states and then cities, which i have to use acorss the application in Leads, account and contact. Can any one please tell me that, is there any way of uploading the pick list values and how can i use the same thing at different places.
Regards
Nisman

Hi Alex,
I tryed this option. It is uploading the values in the City and state picklist field (at account view), but when i tryed drill down the picklist field, i didn't find any other value in that. I checked the same in the field level setup in admin section, no value was uploaded in the pick list value of that field.
Any other idea of doing the same?
Regards
Nisman

Similar Messages

Infoview pick list values and CR parameter values are not the same

Hello All
We have created created Crystal Reports based upon BW Query using Static Parameters as recomended by SAP. When we run the query in InfoView the Pick List is dynamically updated and returns the correct data for selection. When The Crystal Report opens and you wish to navigate through the report using the parameter selection the selection criteria has not been maintained by BW and does not match the Pick List.
Can you please advise if there is any way to make this work?
We ar using Crystal Reports 2008 version 12.3.1.684
on BOBJ XI 3.1
Any help would be appreciated,
Phillip

Hello Ingo
What is strange that in InfoView the pick list is only dynamic the Parameters when the document is open (in InfoView) are not dynamic. An example would be Searching on Material. In Info view the pick list provides all the materials to select from. Once though the report is open the parameter list on the left hand side could be seen as blank as it refers to the static list that is not manually maintained within Crystal Reports or provide a list of details that has no reference to the dynamic selection as returned from BW as it is a static list that was loaded with Crystal Reports Designer on creation.
What we are wanting to achieve is that Info View Pick List is Dynamic and the Parameter list that can be used to navigate within the document once opened is dynamically refreshed to be the same as the Pick List provided by BW and InfoView.
Is this possible?
With CR Designer if we use Do Not Show, Info View no longer provides this parameter on the left hand side.
If we use Editable the list provided in InfoView is equal to the static list as maintained within CR Designer.
We have not tested Read Only Yet so I am not sure if this could be the solution or not.
Any ideas would be of great benefit
Phillip
Edited by: Phillip L on Nov 26, 2010 5:22 PM
Edited by: Phillip L on Nov 26, 2010 5:23 PM

Printing the Pick List at operation level

Hi all,
Is it possible to Print the Pick List at operation level.
Components are assigned to each operations and release of production order takes place at operational level. Once operation is released then only relavent component assigned to that particular operation should come in pick list.
Thanks in advance for your time and efforts.
Regards,
Siva
Edited by: Siva Kumar M on May 19, 2008 3:40 PM

Hi ,
System will not select the Opertaion which has status CRTD by default.
For further selection please try with below settings. ,
Profile = std profile
Production Order Number,
Selection at Operation level
System status = CRTD and Actiavte Excl .check box.
Now system will display the pick list for released operation and it`s component only
Please check, Reward if it is useful.
Pradeep
Edited by: Pradeep Kumar on May 19, 2008 3:45 PM

*configure the Picking list(PL) output type,a smart form for PL.

Hello SIR,
I want to configure the Picking list(PL) output type,a smart form for PL but there should be an output type to print*.
i have assign the out type to shipping point in t.code ovlt .i have created picking list in t.code nact. i created sales order and delivery. i have check my picking list in ovl2n change mode picking out put is available in extra-picking output. i have checked my picking out put for smart form in systems-service-output control if i execute it show like no data to list. no spool request number has generated there.
so were i have to check picking list preview for smart form . is spool request number is necessary.plz help me to view preview of picking list.or plz say the steps to configure this to preview.
thanks,
agilarasan

Hi,
Go to Nace .The application for Goods Issues is
ME - Inventory Management -> select and click on output types ->select wa03 output type and click on processing routines here you can find the form name and the driver program name.So while printing select wa03 as the output type.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Regards,
Harini.S
Edited by: Alvaro Tejada Galindo on Dec 23, 2008 3:46 PM

Printing the pick list from the delivery automatically

Hi All,
Please let me know how to do the : Printing the pick list from the delivery automatically ?
Thanks in advance.
Regards,
Nagaraju.

hi,
execute VL70.
balajia

Hello, I would subscribe to creative cloud for photographer if only I could pay monthly fees in Canadian dollars (not US). How come Canadian dollars is not an option in the pick list???

Hello, I would subscribe to creative cloud for photographer if only I could pay monthly fees in Canadian dollars (not US). How come Canadian dollars is not an option in the pick list???

Hello,
Your reply is not an answer to my question.
My question or remark is that where I wanted to pay in Canadian dollars (not US) otherwise I will not subscribe to monthly/annual fees that may vary due to currency variation form US to Canadian dollars.
This is the pick list, as you can see there are a bunch of currencies but no Canadian dollars :
De : John T Smith
Envoyé : 27 février 2015 21:45
À : Norman Simpson
Objet : Hello, I would subscribe to creative cloud for photographer if only I could pay monthly fees in Canadian dollars (not US). How come Canadian dollars is not an option in the pick list???
Hello, I would subscribe to creative cloud for photographer if only I could pay monthly fees in Canadian dollars (not US). How come Canadian dollars is not an option in the pick list???
created by John T Smith <https://forums.adobe.com/people/JohnTSmith> in Adobe Creative Cloud - View the full discussion <https://forums.adobe.com/message/7238062#7238062>

How to delete the existing list values before binding

Hi,
I'm new for flex..
i like to know how to delete(clear) the existing list data values before binding the new values..
I'm using the list for binding data dynamically by using http services.if i send the another call mean's the exiting item should be flushed and coming data item's would be binded into the same list...
Thank's in advance....
Regard's
mani

Hello
On your ResultEvent method you can add something like this:
private function onResultEvent(event:ResultEvent) : void
yourBindableList = null;
yourBindableList = event.result as ArrayCollection();
In this code i send to my BindableList a null value before i setter to list the result of my HTTPService, making a cast to ArrayCollection.
Regards

Print the pick list

Hi,
how can I print a pick list in WM.
thanks

I have created a delivery and the message for pick list must be printed.
The message ist EK00 but it doesn't work. How can it customize it to print my pick list.
Thanks

Pick List Value Not Working Properly

Hi Oracle Framework Gurus,
I have a strange Issue in which one of my cusom page is working properly in Jdev and not working Properly when deployed in the apps instance.
There are two custom pages with the same VO.
What I do is have a picklist from one of the custom page and depending on the value of the picklist and I navigate to the other custom page.
This is working properly in the JDev,But for some reasons it works properly in apps instance, when I try to run the first time(ie) when I run page A and pick 'X' from the picklist the Page 'B' is coming properly as per the controller code and when i pick 'Y' from the picklist in Page B, it is navigating to Page A as per the controller code.
This works fine for the first time,But when i again select 'X' from the picklist the proper value from the Picklist is not getting selected and passed to the custom package and so I get wrong values in Page 'B'
What could be the reason for it as it working fine in Jdev,I can navigate from Page A to Page B and Page B to Page A as many times possible.

Hi Anand,
Controller1 :
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
//int intPersonId = pageContext.getEmployeeId();
int intPersonId; // = pageContext.getEmployeeId();
String strPersonId = Integer.toString(277671);
//String strPersonId = Integer.toString(intPersonId);
java.util.Date sysdate = pageContext.getCurrentUserDate();
String convSysDate = pageContext.getOANLSServices().dateToString(sysdate);
// Date testdate = (Date)sysdate.dateValue();
// get the Application Module
OAApplicationModule oaAM = pageContext.getApplicationModule(webBean);
Serializable parameters[] = { strPersonId,convSysDate };
Serializable param[] = { strPersonId };
System.out.println("The Sysdate PF "+convSysDate);
//pass parameters to Application Module
oaAM.invokeMethod("insertLovRow", param);
if ((String)pageContext.getSessionValue("PFlag1") != null)
String PFlag1 =(String)pageContext.getSessionValue("PFlag1");
String SDate1 =(String)pageContext.getSessionValue("SDateSession1");
Serializable param1[] = { SDate1 };
oaAM.invokeMethod("insertLovRow", param);
oaAM.invokeMethod("initEmpLovQuery1",param1);
oaAM.invokeMethod("initEmpTransLovQuery1");
OAMessageChoiceBean orgMesgChoiceBean = (OAMessageChoiceBean)webBean.findChildRecursive("Year");
orgMesgChoiceBean.setPickListViewObjectDefinitionName("EmployeeTest.oracle.apps.per.server.EmpTransDateLov");
orgMesgChoiceBean.setListValueAttribute("StartDate");
orgMesgChoiceBean.setListDisplayAttribute("DateRange" );
orgMesgChoiceBean.setPickListCacheEnabled(false);
else
oaAM.invokeMethod("insertRow", parameters);
oaAM.invokeMethod("initQuery", param);
oaAM.invokeMethod("execQuery");
oaAM.invokeMethod("totexecQuery");
OAMessageChoiceBean orgMesgChoiceBean = (OAMessageChoiceBean)webBean.findChildRecursive("Year");
orgMesgChoiceBean.setPickListViewObjectDefinitionName("EmployeeTest.oracle.apps.per.server.EmployeeDateLovVO");
orgMesgChoiceBean.setListValueAttribute("StartDate");
orgMesgChoiceBean.setListDisplayAttribute("DateRange" );
orgMesgChoiceBean.setPickListCacheEnabled(false);
oaAM.invokeMethod("initEmpLovQuery");
OAViewObject oaviewobject1 =(OAViewObject)oaAM.findViewObject("EmployeeUtilVO1");
oaviewobject1.reset();
if (oaviewobject1 != null)
do
if(!oaviewobject1.hasNext())
break;
oaviewobject1.next();
OARow row = (OARow)oaviewobject1.getCurrentRow();
String fullName = (String)row.getAttribute("EmpDep");
System.out.println("The Name is "+fullName);
} while(true);
* Procedure to handle form submissions for form elements in
* a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
//int intPersonId = pageContext.getEmployeeId();
//String strPersonId = Integer.toString(intPersonId);
int intPersonId; // = pageContext.getEmployeeId();
String strPersonId = Integer.toString(277671);
OAApplicationModule oaAM = pageContext.getApplicationModule(webBean);
if (pageContext.getParameter("ViewDetails") != null)
pageContext.putSessionValue("strPersonId", strPersonId);
pageContext.setForwardURL("OA.jsp?page=/EmployeeTest/oracle/apps/per/webui/EmployeePanelIB",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
null,
true, // Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_YES, // Show breadcrumbs
OAWebBeanConstants.IGNORE_MESSAGES);
System.out.println("strPersonId "+strPersonId);
String strEvent= pageContext.getParameter(EVENT_PARAM) ;
if ( strEvent.equals("update"))
OAMessageChoiceBean DepStatus1 = (OAMessageChoiceBean) webBean.findIndexedChildRecursive("Year");
String sDate = DepStatus1.getSelectionValue(pageContext);
//String sDate = DepStatus1.getValue(pageContext).toString();
//Serializable parameters[] = { strPersonId,sDate };
Serializable parameters[] = { strPersonId,sDate };
Serializable param[] = { strPersonId };
System.out.println("The PersonId "+strPersonId);
System.out.println("The Controller Date passed is IBUtil "+sDate);
oaAM.invokeMethod("insertRow", parameters);
oaAM.invokeMethod("initQuery", param);
oaAM.invokeMethod("execQuery");
String flag = "1";
//pageContext.putSessionValue("strPersonId", strPersonId);
pageContext.putSessionValue("PFlag", flag);
pageContext.putSessionValue("SDateSession", sDate);
pageContext.setForwardURL("OA.jsp?page=/EmployeeTest/oracle/apps/per/webui/EmpTestPG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
null,
true, // Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_YES, // Show breadcrumbs
OAWebBeanConstants.IGNORE_MESSAGES);
Controller 2:
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
//int intPersonId = pageContext.getEmployeeId();
int intPersonId; // = pageContext.getEmployeeId();
String strPersonId = Integer.toString(277671);
//String strPersonId = Integer.toString(intPersonId);
java.util.Date sysdate = pageContext.getCurrentUserDate();
String convSysDate = pageContext.getOANLSServices().dateToString(sysdate);
// get the Application Module
OAApplicationModule oaAM = pageContext.getApplicationModule(webBean);
Serializable parameters[] = { strPersonId,convSysDate };
Serializable param[] = { strPersonId };
System.out.println("The Sysdate PF "+convSysDate);
//pass parameters to Application Module
oaAM.invokeMethod("insertLovRow", param);
if ((String)pageContext.getSessionValue("PFlag") != null)
String PFlag1 =(String)pageContext.getSessionValue("PFlag");
String SDate1 =(String)pageContext.getSessionValue("SDateSession");
Serializable param2[] = { strPersonId, SDate1 };
Serializable param1[] = { SDate1 };
oaAM.invokeMethod("insertLovRow", param);
oaAM.invokeMethod("initEmpLovQuery1",param1);
oaAM.invokeMethod("initEmpTransLovQuery1");
OAMessageChoiceBean orgMesgChoiceBean = (OAMessageChoiceBean)webBean.findChildRecursive("Year");
orgMesgChoiceBean.setPickListViewObjectDefinitionName("EmployeeTest.oracle.apps.per.server.EmpTransDateLov");
orgMesgChoiceBean.setListValueAttribute("StartDate");
orgMesgChoiceBean.setListDisplayAttribute("DateRange" );
orgMesgChoiceBean.setPickListCacheEnabled(false);
else
oaAM.invokeMethod("insertRow", parameters);
oaAM.invokeMethod("initQuery", param);
oaAM.invokeMethod("execQuery");
oaAM.invokeMethod("totexecQuery");
OAMessageChoiceBean orgMesgChoiceBean = (OAMessageChoiceBean)webBean.findChildRecursive("Year");
orgMesgChoiceBean.setPickListViewObjectDefinitionName("EmployeeTest.oracle.apps.per.server.EmployeeDateLovVO");
orgMesgChoiceBean.setListValueAttribute("StartDate");
orgMesgChoiceBean.setListDisplayAttribute("DateRange" );
orgMesgChoiceBean.setPickListCacheEnabled(false);
oaAM.invokeMethod("initEmpLovQuery");
OAViewObject oaviewobject1 =(OAViewObject)oaAM.findViewObject("EmployeeUtilVO1");
oaviewobject1.reset();
if (oaviewobject1 != null)
do
if(!oaviewobject1.hasNext())
break;
oaviewobject1.next();
OARow row = (OARow)oaviewobject1.getCurrentRow();
String fullName = (String)row.getAttribute("EmpDep");
System.out.println("The Name is "+fullName);
} while(true);
* Procedure to handle form submissions for form elements in
* a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
OAApplicationModule oaAM = pageContext.getApplicationModule(webBean);
//int intPersonId = pageContext.getEmployeeId();
//String strPersonId = Integer.toString(intPersonId);
int intPersonId; // = pageContext.getEmployeeId();
String strPersonId = Integer.toString(277671);
if (pageContext.getParameter("ViewDetails") != null)
pageContext.setForwardURL("OA.jsp?page=/EmployeeTest/oracle/apps/per/webui/EmpPanelPG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
null,
true, // Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_YES, // Show breadcrumbs
OAWebBeanConstants.IGNORE_MESSAGES);
pageContext.putSessionValue("strPersonId", strPersonId);
String strEvent= pageContext.getParameter(EVENT_PARAM) ;
if ( strEvent.equals("update"))
OAMessageChoiceBean DepStatus1 = (OAMessageChoiceBean) webBean.findIndexedChildRecursive("Year");
String sDate = DepStatus1.getSelectionValue(pageContext);
//String sDate = DepStatus1.getValue(pageContext).toString();
Serializable parameters[] = { strPersonId,sDate };
Serializable param[] = { strPersonId };
System.out.println("The Controller Date passed is CBUtil "+sDate);
System.out.println("The PersonId "+strPersonId);
oaAM.invokeMethod("insertRow", parameters);
oaAM.invokeMethod("initQuery", param);
oaAM.invokeMethod("execQuery");
String flag = "2";
//pageContext.putSessionValue("strPersonId", strPersonId);
pageContext.putSessionValue("PFlag1", flag);
pageContext.putSessionValue("SDateSession1", sDate);
pageContext.setForwardURL("OA.jsp?page=/EmployeeTest/oracle/apps/per/webui/EmpIBUtilPG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
null,
true, // Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_YES, // Show breadcrumbs
OAWebBeanConstants.IGNORE_MESSAGES);
Hi Above two are the controller codes forget the rest of the codes,Concentrate on the PFR code, Just want to know what I am doing is correct or not.
First time when I select the Picklist value,the value gets passed as a parameter to the custom package and the page gets displayed properly and vice versa,But I am not able to do the same cycle again for some reasons.
Please get back to me ASAP.
Regards,
Magesh.M.K.
Edited by: user1393742 on Oct 19, 2010 11:58 PM

Unable to hide advance button in the input list values pop up

I am using a input list of values ,in pop up i want only basic search view crietiria , but i am not able to hide advance option from the popup.
please help me to resolve this issue

sathishreddy wrote:
I am using a input list of values ,in pop up i want only basic search view crietiria , but i am not able to hide advance option from the popup.
please help me to resolve this issueHow do I ask a question on the forums?
SQL and PL/SQL FAQ
what does this have to do with Oracle DB

GetPicklistValues - Get pick list values for Account Contact Roles

Is it possible to retreive the picklist values for the Accounts contact roles through the GetPicklistValues API? If so, what are the correct object type and field name.
Based on the documentation I'm guessing this isn't possible, just looking for confirmation.
Thank You.

Hi !
I think you're right, nothing today allows you to retrieve the contact role list...
Let's wait for the next release...
Hope this will help, feel free to ask more !
Max

Runtime Error for the Picking List Smartform

Hi All,
I am working on the smartform, used for GI Scrapping for 551 Movement type. The requirement is they need DEA number for the Plant. I have written code for getting the DEA number. Iacivated the form and I want to print it using the TCODE MB02.
I get the runtime error saying UPDATE TERMINATED.I saw Dump Analysis it says CALL_FUNCTION_PARM_MISSING. It says IS_ADRC is the parameter. The ABAP program is the include program /SMB40/M07DRSON. This show the function module lf_fname with out passing the parameter IS_ADRC. How can I change the program. This is Standard program.
Thanks,

Then the smart form interface in the transaction SMARTFORMS you have to remove the parameter IS_ADRC. As the calling program will not automatically add the parameters if you add it in the smartforms...
If you want the values from the table ADRC..you can write subroutines in the INITIALIZATION to get the values...
Thanks,
Naren

May I show multiselect pick list selected values in a report

People
Im new at Oracle Ondemand but already worked quite a lot with it.
One thing I can't find out is how to show selected multi select pick list values in a report.
Cant pick that values with formula edito either....
I fell that It must be easy and I am not knowing where to watch...
Thanks in advance for your help.

Thanks Alex!!!
I understand that if I need reporting of this kind of fields best idea is NOT using them....
Is there a work around?
Regards

Picking list output in VL70 for the outbound deliveries picked via WM

Hi Experts ,
How to take Picking list output in VL70 for the outbound deliveries picked through transfer Orde(WM).
Generally, we ll genreate picking list in VL70 directly giving from the outbound delivery. Then , system wll confirm the Picked quantities along with the Print out in deliveries as per the configuration done in OVLT..
In this case , how to take the Picking list in VL70 ? Pls give your advice on this..
With Regards
S.Siva

hi,
this is to inform you that,
use - LX21 for this purpose.
hope this clears your issue
balajia

To create a sample pick list showing the position of Bar codes

Dear All,
I need some guidance to create a sample pick list for Print. Its a bar-code printing with a shipment number which can be scanned for generating the pick lists. Tried still not able to create the sample pick list.
Regards,

Hi Ramesh,
To be more clear on this here is the scenario: -
The Shippers have to key in all shipment numbers two times on UPS, LTL, & TRUCKLOADS. They have to key in the shipment numbers two times: - First to physically pull the units and then after all the units are pulled, they have to key in the shipment number again to get the packing or picking list to print.
To avoid this above process: -
If we could get the shipment number in a bar-code on the pick ticket above or beside the CURRENT HUMAN READABLE NUMBER So that the shipment number can be scanned instead of keying in again.
For this scenario I want to create a pick list showing the position of the Bar-code after I change the printing logic through a smartform. For this I wanted to create a pick list to make the end user have a better visibility. Basically I want to create some test data. Any clues on this.
Regards,
Edited by: SAURYASEN on Sep 15, 2010 12:26 PM

Bulk uploading the Pick List Values

Similar Messages

Maybe you are looking for