Bulk URL Monitoring is SCOM 2012 SP1

Hey Team,
i need to setup 100 + url monitors in scom 2012 sp1, i came across a term named BULK URL Monitor which suits my requirement. The issue is i am failing to get it to work when i click Bulkmonitor.exe i am gettign the below error and not sure how to resolve
it.
System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.EnterpriseManagement.Core, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
File name: 'Microsoft.EnterpriseManagement.Core, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'
at Microsoft.EnterpriseManagement.BulkUrlManager.BulkUrlManagerForm..ctor()
at Microsoft.EnterpriseManagement.BulkUrlManager.Program.Main()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
Any suggestions will be highly appreciated.
-vrkumar01
RajKumar

It worked.
intially i tried to install in \System Center 2012\Operations Manager\Setup & System Center 2012\Operations Manager\Server both failed but this
System Center 2012\Operations Manager\Console worked.
thanks a lot
-vrkumar01
RajKumar

Similar Messages

Performance of Network Monitoring in SCOM 2012 SP1

Hi all!
I´ve problems with performance of the network monitoring feature in SCOM 2012 SP1.
According to the
guide the following should be adeqate:
•1000 network devices (approximately 12,500 monitored ports) managed by a resource pool that has three or more management servers
•500 network devices (approximately 6,250 monitored ports) managed by a resource pool that has two or more gateway servers
We have 800 network devices with a total of 24000 ports,
BUT only 1500 of them are monitored. This is basically what happens automatically after discovery, since only ports between monitored devices are monitored by default.
For this setup I first used only one management server dedicated to the Network Pool,
based on my assumption that if two servers could monitor 6250 ports, one server would be more than enough for 1500. I found this configuration working very poorly so I added another server. I now have two servers
dedicated for the Network Resource Pool. (They are NOT members of the “All management servers resource pool”)
Still, I get constant alerts regarding Health Services Private Bytes on these servers. They vary between 1-2Gbytes. Furthermore, if one of the servers goes offline, the network devices that was monitored by that server becomes grey for
several hours. Even if the server only is rebooted it takes forever to get everything online and green again.
I don´t really know what I should do now. I had a plan to replace our current network monitoring system (SNMPc) which easily handles this load on only one server. They are of course completely different beasts, but still. SCOM seems to
require a massive back-end to produce equivalent real life results.
Any suggestions or reflections from the field are highly appreciated!
Regards
Peter

Hi,
Try to overide the monitor Health Services Private Bytes by the following steps.
◾Go Authoring space – Management Pack Objects – Monitors
◾Go to change scope – select clear all – look for Health Service – tick it and press OK.
◾Expand Health Service – expand Entity Health – expand Performance – expand Health Service Performance
◾Select the Health Health Service Private Bytes Threshold.
◾Right click the mouse and choose to overide the monitor for a group
◾Select the group called Management Server Computer Group and press OK
◾Select the Agent Performance Monitor Type – Threshold and change the value 104857600 to ex. 2610612736.
◾Select to store the overide in a management pack you have created and press OK
Juke Chou
TechNet Community Support

TFS monitoring in Scom 2012 SP1

Hi,
I have a requirement on TFS 2010 monitoring in which i have followed the document for TFS monitoring avaialble in technet but unfortunately i'm unable to discover any objects.
Run as Account: i have created a seperate service account and added to TFS admin group
Deployed MP (TFS 2010.mp)
Assigned Account with profiles (TFS 2010).
But still its not discovering any objects. (Application tiers/Build Servers/Proxy/Application Installations)
Am i missed out anything apart from the above configuration? Please help ASAP.
ShivaKumar.G

Hi,
Here is an official article for your reference.
Monitoring Integration between Operations Manager and TFS in System Center 2012 SP1
http://technet.microsoft.com/en-us/library/jj899893.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Some of the SQL Server 2012 are not getting monitored in SCOM 2012 SP1.( basics monitoring is happening, expect SQL role)

Found that all the SQL servers are getting monitored, expect few servers which are having SQL server 2012 role.
proxy is enabled for these servers, when I checked discovered inventory for SQL 2012 database unable to find these servers in that list.
and other servers having SQL Server 2012 monitoring properly issue is with only few servers.

Hi,
thanks for the all the input, we are using service account as windows account instead of action account !!
will that also affect discovery of SQL role?
and also found that there are many alerts in SCOM console, with alert description :
SQL Server cannot authenticate using Kerberos because the Service Principal Name
(SPN) is missing, misplaced, or duplicated.
please let me know how we can resolve this issue, will it affect SQL discovery as well ?

SCOM 2012 SP1 - Show on event view all snmp trap (SNMP monitoring work)

Hello everybody,
Sorry for my english, I write normaly in french, but we have more result in english.
I have a problem with SCOM 2012. I try to catch all snmp traps sended by a 2960 CISCO switch on a EventView with a specific rule (Authoring->Rule->Collection Rules -> Event Based -> SNMP Trap (Event) based on the object target "Node")
I creat a specific management pack juste for the rule and the views.
SNMP Monitoring - CISOC 2960 => It's OK, I can have the processor state, utilization, etc ...
SNMP Monitoring Ubuntu computer => It's OK, I can have all the state I want.
SNMP Traps => The switch or the computer send traps over the network, and I can see in wireshark, the server receive the traps
SNMP Service (Windows service) => Disabled
SNMP trap (Windows service) => Disabled
Health Service (Windows service) => Enabled
Port 162 UDP => Open and listenning by the MonitoringHost.exe
Firewall rules => Everythinks is OK
SNMP Trap send version is => 2c
SNMP Monitoring device version is => 2c
I try too many of solution on different web site like :
http://scom-2012.blogspot.ch/2012/07/setting-up-snmp-monitoring-in-scom-2012.html
http://social.technet.microsoft.com/Forums/systemcenter/en-US/731661b9-10a1-4d3f-ba83-8e84d25ab760/event-collection-for-network-devices-scom-2012
http://social.technet.microsoft.com/Forums/systemcenter/en-US/a15bce49-fb62-4fd4-93cf-f87c3b734d58/snmp-trap-based-monitoring?forum=operationsmanagergeneral
http://social.technet.microsoft.com/Forums/systemcenter/en-US/41f5b6ef-c8b9-461d-bdcb-81fde5a89f50/scom-2012-unable-to-monitor-snmp-traps?forum=operationsmanagergeneral
http://social.technet.microsoft.com/Forums/systemcenter/en-US/4051fbd1-06f1-49e0-9ad4-4cbe4d2d7d4d/discover-windows-computer-as-network-device-w-snmp?forum=operationsmanagerauthoring
http://technet.microsoft.com/en-us/library/hh563870.aspx
http://social.technet.microsoft.com/Forums/en-US/cad1d3f9-594f-4f06-a5aa-660ccc2e9192/snmp-trap-based-monitoring-in-scom-2012-sp1?forum=operationsmanagerauthoring
http://social.technet.microsoft.com/Forums/en-US/41f5b6ef-c8b9-461d-bdcb-81fde5a89f50/scom-2012-unable-to-monitor-snmp-traps?forum=operationsmanagergeneral
http://social.technet.microsoft.com/Forums/en-US/e05a1c8f-7280-4f80-86cf-aabb4269bb87/scom-2012-customizing-snmp-trap-event-data?forum=operationsmanagergeneral
http://social.technet.microsoft.com/Forums/en-US/6826f6a6-bbc3-444b-9b18-288d7fedac3e/scom-unable-to-monitor-snmp-traps?forum=operationsmanagergeneral
http://social.technet.microsoft.com/Forums/en-US/7cd1571a-d292-4efc-9921-5a068f6f1691/scom-2012-sp1-ur2-snmp-monitoring?forum=operationsmanagermgmtpacks
Do you know a workaround? Or a different way to catch all the traps from a network device and show them (traps) on a event views.
Thank you in advance.
KimBaxZ
Computer expert system technology

Hello Yan Li,
I read your link, and I found this :
The network devices must be discovered and registered as ICMPSNMP devices.
And when I make the dicovery the first time, ICMP doesn't work, so I put only SNMP. This morning I tried with ICMP and SNMP, but the same problem come to me. And I found the rootcause of the problem with this post : http://www.code4ward.net/main/Blog/tabid/70/EntryId/105/Troubleshooting-Network-Discovery-in-SCOM-2012.aspx
I allowed the SNMP service, ping, and Health Service, just after I try a second time to dicover my device and it's work (ICMP and SNMP).
I recreat all my management pack and the rule. And now it's work! Thank you very much for your help!!
Have a nice day
Best regards
KimBAxZ
Computer expert system technology

SCOM 2012 SP1 exchange edge transport queue is showing as not monitored state.

Hi,
We have exchange servers which is being monitored by both SCOM 2007 and SCOM2012 SP1, in SCOM 2007 R2 exchange edge queue is getting discovered, but in SCOM 2012 SP1 it is showing as not monitored state.
Please help me in resolving this issue.

Hi,
What kind of MP did you import on SCOM 2012? Meanwhile, please try the following suggestions.
1. Start the Remote Registry service.
2. Enable File and Printer Sharing
3. Check the network connectivity between the management server and the Exchange Server and ensure the FQDN of the Exchange Server can be resolved.
4. Clear the HealthService queue on the Exchange Server:
a. Stop System Center Management service.
b. Go to C:\Program Files\System Center Operations Manager 2007\, and rename the “Health Service State” folder.
c. Restart System Center Management service.
Niki Han
TechNet Community Support

SCOM 2012 SP1 SQL Server 2008 R2 Clustering Monitoring?

We have a new print management system that was setup using SQL server 2008 R2 clustering. Right now we have SQL MP (monitoring)(discover) 6.3.173.1. They had a failover occur a week ago and SCOM didnt throw any alerts. As a temporary
fix, I found some correlated events and setup a monitor for those events on the servers. However, the system owner wants to know if there is a MP that will monitor for a SQL cluster failover event. I have looked and looked and cant seem to find
anything that gives a whole lot of detail on this.
Thanks
EFD
Warm Fuzzies!

Yes, you can monitor SQL Cluster 2008 using SCOM 2012 SP1. but you need to install SQL MP and Windows Cluster MP and Enable proxy Agent on physical nodes.
You can refer below link {it's same for SCOM 2012}
http://blogs.technet.com/b/birojitn/archive/2010/04/14/sql-server-2008-cluster-monitoring.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

SCOM 2012 SP1/R2 Monitoring of IBM Bladecenter doesn´t work

We tried the IBM Hardware Management Pack 4.0 and 4.5 and configured everything according to the guide. The Bladecenter is discovered correctly but we dont get any health data or Module Information. It´s almost the same as in this thread:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/ceda483b-9500-4831-869c-4b3d0f178924/cant-get-scom-2012-sp1-to-monitor-ibm-bladecenter?forum=operationsmanagerdeployment
But this problem was resolved through rediscovering the Bladecenter with SNMP v1 or v2 instead of v3 which we did right from the start. We had this Problem with SCOM 2012 SP1 and IBM HMP 4.0/4.5. Since then we upgraded to SCOM 2012 R2 and IBM HMP 4.5 and
ist still the same issue. Everything else works fine like the Hardware Management Packs for various IBM Storage etc...
Thank you.

Hi,
Do you mean the issue is gone after you rediscover the blade center with SNMP v1 and v2? If so, I will record this.
Juke Chou
TechNet Community Support

How SCOM Agent will get degraded which is installed on the monitored server while reverting Back from CU6 to CU3 of SCOM 2012 SP1?

Hi,
I have SCOM 2012 SP1 (CU3) inatalled on base server 2012 Standard which is a VM.
Now I am planning to Go for CU6 and thinking to take snapshot of complete SCOM server instead of taking Data Base Backup. Which should I prefer?
If i am going for the Snapshot for complete SCOM server and run the CU6 complete setup. And some thing went wrong and not able to fix the issue.
And I need to reverted back to CU3 using Snspshot.
Now, how can I revert the Agent Version to CU3 level which is already upgraded to CU6?
Thanks
Amit Raj

Hi,
all agents with CU6 will be work fine with SCOM CU6.
But if you decide back to the CU3 you need to backup your OPsDB and DWH (if CU6 contains sql scripts).
In regard agents you can use repair from OPsMGR console.

SCOM 2012 SP1 Web Console High Availability Configuration

We are a large children's hospital, with many ancillary units that we are trying to get to help monitor their servers/devices/applications through the SCOM web console. Due to the number of connections we have two standalone web console servers. The
entire environment is running on Windows Server 2012 Standard Edition servers, and we are running SCOM 2012 SP1 UR3. When accessing the web console directly via the FQDN of the server, everything works great. We have an HLB virtual IP and DNS entry
(SCOM.domain.com), which works flawlessly when access the default IIS website. However, when accessing the web console URL (http://SCOM.domain.com/OperationManagerdown) Negotiate:Kerberos, NTLM, Negotiate. I believe the issue lies in the fact that
the Application Pools are running under the ApplicationPoolIdentity identity, and the HTTP SPN's are using the machine account. We have tried changing the identity of the application pools to a domain account (the SDK service account), and modified the
SPN's so the HTTP SPNs are assigned to the domain account. We also created SPNs for the HLB VIP DNS alias. But to no avail. While we realize that Microsoft does not support load balancing of the web console, there has to be a way to make
it work. We will have more than 50 connections, so using one web console server is not an option, and asking our users to use two different URLs is not very user friendly. If anyone has any suggestions or had any success, please let me know.
Any help is greatly appreciated!

Is switching to forms based authentication an option? The extra login might be considered a pain however, but forms plus SSL is the only successful LM configuration we have worked with. We use F5s.
Sign Up Now for the Infinity Connected™ Full Feature 30 Day Trial
Visit the Infinity Connected™ Support Center
Visit Our Website: http://www.infinityconnected.com
Visit Our Blog: http://blog.mobieus.com
Want to just talk shop? 1-800-691-6774 / [email protected]
Monitoring Information Center | Infinity On-Line | [email protected]

SCOM 2012 SP1 availability report in MS Generic Report Libary shows inaccurate data

Hi,
in SCOM 2012 sp1, we have the generic availability report showing many of our web sites with no up time beyond a certain date. The web sites are ok, the web availability monitors are all healthy and the monitors test ok
None of these web availability tests are in Maintenance mode although what we are observing certainly makes us think that they are.
We also have a Web transaction login monitor for WEBSITE(A) that does not show this same outage for a login test.
However WEBSITE(A)'s availability monitor shows the same downtime as the other web availability tests.
Any thoughts on where to look for this problem? Im guessing its a problem placing the data in the Warehouse?
Thanks Lance

Hi,
Based on my understanding, the report shows there is downtime for the web site, but the web site did work well always.
It seems like that there is old data stored in data warehouse, would you please check the report for recent date, such as one day or two days.
Regards,
Yan Li
Regards, Yan Li

Manage DPM servers, running DPM jobs, etc from SCOM 2012 SP1

Hi,
Little background about our systems.
We have a dedicated SCOM 2012.
We have 22 DPM servers, DPM 2010 and DPM 2012 (we are upgrading to 2012 SP1, we have customers that still using Windows 2003 servers) to be managed by SCOM
We have a few DPM servers that are not located on the same domain as the SCOM server (untrusted domain).
Some problem we have
1. When we try to manage the DPM servers from the SCOM server.
From SCOM 2012 server I can “Manage DPM server” that are located in our domain but I cannot manage DPM servers located on untrusted domains (customer’s domains). I receive the below error message
"Unable to connect to <untrusted domain DPM SERVER> ID: 948
Verify that the DPM service is running on this computer"
I guess it’s because the account that I’m using to run SCOM server located in our domain and does not have the permission to open the DPM console on the untrusted domain. So I wonder if it is possible to use “RUN AS profiles/accounts”
to solve this issue, and how?
2. I have installed SCOM 2012 Operations Manager Console on my computer and then installed DPM Central Console.
When I select one dpm server (from my computer), that is on our domain, and then click “Manage DPM server” I got this error message
"Unable to connect to <our domain DPM SERVER> ID: 33333
1. Verify that the DPM service is running on this computer (YES)
2. Verify that the current user has been added to at least one of the roles in Operations Manager. (YES)
3. Open Operations Manage console and then try launching the DPM Console (THAT IS WHAT I AM TRYING TO DO)
4. If you have re-imported the management pack recently, the role configuration may be corrupt. Open the DPM-specific roles and check if the roles have task assigned to them. If not, delete the roles and recreate the...."
When I click on “Get more information” I get this error message.
"You don´t have access permission to connect to the System Center Data Access service on <SCOM SERVER>. Please check if it is a permission issue".....
Do you know why I cannot connect to any DPM server on our own domain?
Why do I get access permission error on my computer but not on the SCOM server (using the same account)?
What should we do to be able to connect to DPM servers that are on untrusted domain?
3. Is it possible to see Last Recovery Point date/time in SCOM alerts?
For me it is the first thing I look at. If it has failed 10 min ago it is not critical.
But if it is a date and time more than 1 day old, then it is critical.
I hope someone can help us with this
Br
SvBoho

Hi,
To manager DPM, I think we may need to add the account to local admin group of the DPM server.
In addition, to connect to DPM the user needs permissions to DPM/SQL Server DPMDB.
For your DCs, have your enabled agent proxy option? If not, please enable that option for all DCs.
To monitor DPM with SCOM, please also go through the below links:
http://kevingreeneitblog.blogspot.com/2011/10/managing-and-monitoring-system-center.html
http://damatisystemcenter.com/2013/10/14/monitor-data-protection-manager-2012-using-scom-2012-sp1/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
Yan Li
Regards, Yan Li

Problem upgrading from SCOM 2012 SP1 to R2 (near impossible to uninstall SCOM agent from Management Server)

I'm trying to upgrade our SCOM 2012 SP1 environment to R2, but I have a heck of a problem getting there.
We currently have an test installation with SCOM 2012 SP1 with Management Server and Console on a single 2012 Standard server. The database are located on a remote server. The R2 setup stopped mid way through the setup, because the SCOM 2012 SP1 agent is
installed. And I could NOT remove it my any normal means. I've tried "misexec.exe /x productcode", the setup, powershell uninstall and so on. Nothing works, because the management server installation is blocking the uninstall. The uninstall says
I have to remove the management installation first. And that's not gonna happen.
I had to follow this guide to finally getting through the setup: http://www.opsman.co.za/forcibly-removing-a-scom-agent-that-cannot-be-uninstalled-by-normal-means/
In addition to searching for the agent msi install key in registry, and deleting everything. After I did this, the setup is working, and the SCOM management server, console and DB are up to date. However, the Microsoft Monitoring Agent are STILL there in
Control Panel. And this can NOT be the most healthy way of getting through the setup.
I'm about to upgrade to R2 in our production environment with 3 management servers, and I would hate to go through this sketchy process there as well. Just for the record, I have no idea why the agents are installed on our management servers.
Any of you have tips as to how I can get rid of the agents more gracefully?

Hi
Thanks for the replay guys!
None of those links touch my problem I'm afraid. I have followed the Upgrade guides you pointed to, step by step. But the setup does not Complete. There's problems during the actual software Upgrade of the management servers (3'rd step in the Upgrade page).
I've dived into the Application logs and installation logs, and as far as I can tell, it stops because it has trouble upgrading while the server has the 2012 SP1 Agent installed. I do not remember the actual error text right now, but I can get it in a few
days.
Anyhow, the setup DID move on once I removed most of the registry information of the agent installation. So. that leaves me to the conclusion that the agent IS in fact stopping the setup. Either the agent are malfunctioning, or the setup do not expect the
agent to be present on the management servers. I suspect the latter to be the the most plausible. At least until Yan Li told me this was normal.
So, I'm not sure what to think. I'm pretty much forced to remove this agents, as this is the only thing allowing me to continue the setup. At least untill I'm told otherwise. But I hate to do it this way. It's so dirty. The registry is pretty much cleaned,
but there's still Application files present, and the agent is still in the Control panel and can be started. It's not something I would like to do in our prodution environment.

Non supported version of SQL with new install of SCOM 2012 SP1

I have SQL 2012 SP1 running on Server 2012. I have tried the SCOM installation with and without CU2 (to fix the 1618 installation error)
SC VMM installed cleanly and appears to work.
The install for SCOM produces an error that says, "The installed version of SQL Server is not supported". I have not been able to find any log from the install that has that error in it.
Also, I have not been able to determine the true requirements of the SQL server for SCOM. (I found dock SCOM 2012 RTM and SQL 2008 R2, but noting for 2012 SP1.
Can someone point me to the correct place for the install log with (hopefully more information) and/or the requrements for the SQL installation?
Roy

The log is not created yet because it has not started the install.
The firewall is the most common issue indeed. Temporarily Disable the firewall and see whether you can continue.
Are you using a developers edition? The only 2 editions supported are standard and Enterprise.
The true requirements for SCOM 2012 sp1:
We recommend that you check for updates and hotfixes for SQL Server. Note the following database considerations for Operations Manager:
SQL Server 2008 R2 and SQL Server 2012 are available in both Standard and Enterprise editions. Operations Manager will function with both editions.
Operations Manager does not support hosting its databases or SQL Server Reporting Services on a 32-bit edition of SQL Server.
Using a different version of SQL Server for different Operations Manager features is not supported. The same version should be used for all features.
SQL Server collation settings for all databases must be one of the following: SQL_Latin1_General_CP1_CI_AS, French_CI_AS, Cyrillic_General_CI_AS, Chinese_PRC_CI_AS, Japanese_CI_AS, Traditional_Spanish_CI_AS, or Latin1_General_CI_AS. No other collation
settings are supported.
The SQL Server Agent service must be started, and the startup type must be set to automatic.
Side-by-side installation of System Center Operations Manager 2007 R2 reporting and System Center 2012 Service Pack 1 (SP1), Operations Manager reporting on the same server is not supported.
The db_owner role for the operational database must be a domain account. If you set the SQL Server Authentication to Mixed mode, and then try to add a local SQL Server login on the operational database, the Data Access service will not be able to start.
For information about how to resolve the issue, see System Center Data Access Service Start Up Failure Due to SQL Configuration Change
If you plan to use the Network Monitoring features of System Center 2012 – Operations Manager, you should move the tempdb database to a separate disk that has multiple spindles. For more information, see
tempdb Database.
Found here:
http://technet.microsoft.com/en-us/library/jj656654.aspx#BKMK_RBF_OperationsDatabase
It's doing common things uncommonly well that brings succes.

System center data access service crashes with event id 26339 ad 26380 in SCOM 2012 Sp1 RTM

hi all,
I have deployed scom 2012 sp1 rtm on Os 2012 std and database is on another VM Machine having SQL 2012 sp1 with OS 2008 R2 SP1 std, suddenly sql vm get stopped and unable to start , so I have delete it from hyper-v 2012 console and imported the VM again
in Hyper-0S 2012 cluster.
Now, System centre data access service get crashed again and again with mentioned events
event 26339, OpsMgr SDKService
event 26380, opsmgr SDkService
An exception was thrown while initializing the service container.
Exception message: Initialize
Full exception: HTTP could not register URL
http://+:51905/ConnectorFramework/ because TCP port 51905 is being used by another application.
The System Center Data Access service failed due to an unhandled exception.
The service will attempt to restart.
Exception:
System.ServiceModel.AddressAlreadyInUseException: HTTP could not register URL http://+:51905/ConnectorFramework/ because TCP port 51905 is being used by another application. ---> System.Net.HttpListenerException: The process cannot access the file
because it is being used by another process
   at System.Net.HttpListener.AddAllPrefixes()
   at System.Net.HttpListener.Start()
   at System.ServiceModel.Channels.SharedHttpTransportManager.OnOpen()
   --- End of inner exception stack trace ---
   at System.ServiceModel.Channels.SharedHttpTransportManager.OnOpen()
   at System.ServiceModel.Channels.TransportManager.Open(TransportChannelListener channelListener)
   at System.ServiceModel.Channels.TransportManagerContainer.Open(SelectTransportManagersCallback selectTransportManagerCallback)
   at System.ServiceModel.Channels.HttpChannelListener`1.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Dispatcher.ChannelDispatcher.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.ServiceHostBase.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at Microsoft.EnterpriseManagement.ConnectorFramework.ServiceDataLayer.ConnectorFrameworkDataAccessChannel.Initialize()
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.Initialize(InProcEnterpriseManagementConnectionSettings configuration)
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.InitializeRunner(Object state)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
Kirpal Singh

Hi Kirpal
Can you try this it might help as its an known issue of getting event id 's 26361,26380 try out & lets see if it helps.
The manifest files are located on the RMS at the \Program Files\System Center Operations Manager 2007\ root directory. The manifest files will need to be edited for the config and sdk service on affected RMS. The file names are:
Microsoft.Mom.Sdk.ServiceHost.exe.config
Microsoft.Mom.ConfigServiceHost.exe.config
In between the EXISTING <runtime> and </runtime> lines – you need to ADD a NEW LINE with the following:
<generatePublisherEvidence enabled="false"/>
This solution disables CRL checking for the specified execute-ables, permanently.

Bulk URL Monitoring is SCOM 2012 SP1

Similar Messages

Maybe you are looking for