Bulletin Board boot does not bring up services

Hello,
I am trying to create a new tuxedo server, i have built it successfully and have
included the server name in the servers section of the Config File . The Config
File was built to
create the Tuxconfig file.It successfully created the binary file.
Now i Boot my bulletin board and i get a message CMDTUX_CAT 819 Info .Process
id nnnnn Assume Started(Pipe)
I dont see this in my processes using tmadmin.
Is there any step that i am missing..
Any help would be appreciated
Thanks
Vijaya

Vijaya,
The process hasn't started correctly. Generally, "assume started" means
that the server hasn't started!
Has it core dumped? (Is there a core file in your appdir?)
Does it need access to a shared library that isn't in your shared
library path?
If you run tmboot -i <your sserver's id> -g <your server's group> -d 1
you will see the server's full command line. One wahy to debug it is to
type that command line in and run the server from the shell prompt manually.
I hope that helps.
Regards,
Peter.
Got a Question? Ask BEA at http://askbea.bea.com
The views expressed in this posting are solely those of the author, and BEA
Systems, Inc. does not endorse any of these views.
BEA Systems, Inc. is not responsible for the accuracy or completeness of
the
information provided
and assumes no duty to correct, expand upon, delete or update any of the
information contained in this posting.
Vijaya wrote:
Hello,
I am trying to create a new tuxedo server, i have built it successfully and have
included the server name in the servers section of the Config File . The Config
File was built to
create the Tuxconfig file.It successfully created the binary file.
Now i Boot my bulletin board and i get a message CMDTUX_CAT 819 Info .Process
id nnnnn Assume Started(Pipe)
I dont see this in my processes using tmadmin.
Is there any step that i am missing..
Any help would be appreciated
Thanks
Vijaya

Similar Messages

Holding option on boot does not bring up boot selection screen

Holding option on boot does not bring up the boot selection screen, the machine just boots from the previously selected startup drive.
MBP 17 mid-2010.
SL 10.6.7
I created a three partition drive on a Seagate GoFlex 1.5 TB drive. GUID partition table.
Used SuperDuper to clone the drive. Drive is bootable. Booting from drive works using Startup Drive selector, so does not appear to be a drive issue.
I'm baffled. What can I do to fix/troubleshoot?
Peter

Are you using a Bluetooth keyboard by any chance, I see that same behaviour at times if so ?
I tend to select the desired boot volume with System Preferences/Startup Disc these days although option should work ...
I have noticed that if you reboot right away the option key often works the second time round which is odd.

Oracle WAM does not bring up a work order

This is my first time working with WAM and I can get to the home page and the scheduling page but when I click on either Service Request or Work Order, it brings up a new page with only a menu bar on the top. From here on, it does not matter what option I choose, it does not bring up anything else. It does start the java applet. I am on a 64 bit windows 7 OS with IE 9. I also have java 1.6.0_24 installed and I need that version for another app so I am really hoping that the java version is not causing the issue and there is a work around for it. Any help would be really appreciated. Thanks!

You can't. And even if you manage to do some sort of hacking or jailbreaking the first gen simply lacks the power to run the later operating systems.

The itunes application icon on my dock does not bring up itunes. Haven't had a problem with this in the past.

The itunes application icon on my dock does not bring up itunes. I have no problem accessing itunes from my iphone though, so I believe it is computer related rather than an itunes issue. Haven't had this problem before.

Does the icon in your dock look like this?
Can you open iTunes successfully from your Mac's Applications folder?
Are you running the current version of iTunes (11.2.2)? If not, get it from here:
http://www.apple.com/itunes/download

When I enter a web address, hitting enter does not bring it up. I have to use my mouse and click "go to address" arrow. This only recently started. How do I fix this?

when I enter a web address, hitting enter does not bring it up. I have to use my mouse and click "go to address" arrow. This only recently started. How do I fix this?
When I open firefox my home page comes right up, but, anything I enter after that does not open by hitting enter.
Please advice,
Anita

Probably caused by an extension that you have installed. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

When I try to create a new Message on my Mac, Messages does not bring up my Contacts

I have followed the instructions to setup Messages, I can send messages to the email addresses that I have memorized, but when I try to create a new Message on my Mac, Messages does not bring up my Contacts when I type in the search field for a person that has an iPad or iPhone.
This sems out of sorts for an Apple product. Their stuff normally just works.
For some reason, My Mac Mini with Mountain Lion doesn't recognize my contact names, or it isn't synched with my contacts...
Anybody else want to weigh in, please?
Thank you!

Hi,
I would point out that I did say...
Of course the Contacts List has to have people listed in it.
The Error seems to be that you have not even got an My Card.
The OS when the computer is brand new and you set up the first Admin Account should create at least once Card entry for the Address Book/Contacts which has the Head and Shoulders icon (the My Card)
The does presume the the first account on the Mac doers have a person's First name and Last name to work with.
Of course not everyone sets things up this way.
Anyhow
To Check the Contacts List open the app.
Go to the Preferences.
Go to the Accounts section.
This should list at least two "accounts
One is for Syncing with iCloud and the other is for storing the Info on the Mac itself
In System Preferences > iCloud you can only set up one Apple ID to be the iCloud ID.
If you do or have changed this you may have extra accounts in the Contacts > Preferences > Accounts
Uploaded with Skitch!
7:36 PM Thursday; September 6, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

"F11 System Recovery" during boot does not work after Cloning hard drive.

Problem: “F11 System Recovery” during boot does not work after Cloning hard drive.
HP Envy m6-1125dx UEFI Notebook Computer with GPT hard drive.
Original Seagate Hard Disk GPT 700GB with Window 8.0_64 upgraded to Windows 8.1_64
Startup Menu (F11 System Menu works properly) only on original hard drive.
Following obtained from Disk Management & diskpart in Command Prompt.
GPT Disk <700GB>
Partition 1 WINRE NTFS Primary 235MB/400MB [Recovery]
Partition 2 EFI System FAT32 (LBA) Primary 108MB/260MB [System]
Partition 3 (NONE) Unformatted Primary 128MB/128MB [Reserve]
Partition 4 Main NTFS Primary 90GB/195GB [Primary “C”]
Partition 5 (NONE) NTFS Primary 372MB/450MB [Recovery]
Partition 6 Data NTFS Primary 7GB/475GB [Primary “E”]
Partition 7 NTFS Primary 26MB/350MB [Recovery]
Partition 8 Recovery NTFS Primary 24GB/26GB [Recovery “D”]
I have Cloned the original hard drive to a new HGST 1TB Hard Drive using four different methods (sector by sector):
Acronis True Image 2015
Acronis Backup for PC
AOMEI Backupper Professional
Macrium Reflect
Each time the cloning process completes successfully and has the same original partition arrangement. The computer works properly except when trying to use the “F11 System Menu” key during boot. It gives the following error message:
“Recovery
Your PC needs to be repaired
A required device isn’t connected or can’t be accessed.
Error code: 0xc0000225
You need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. “
Any suggestions why the F11 System Recovery does not work during boot and how to fix the problem would be appreciated. I have does various disk checking and file checking on both the original and new hard drive with no errors.
Thank you in advanced.

Hi,
How did you clone the HDD ? One-for-one or different method ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HT201401 i have a birthday showing in my calendar listed as an all day event and it is incorrect how can I delete it. When clicked on does not bring up the edit feature. The vodaphone shop thinks it has synced with my facebook app.

i have a birthday showing in my calendar listed as an all day event and it is incorrect how can I delete it. When clicked on does not bring up the edit feature. The vodaphone shop thinks it has synced with my facebook app.

hello, the addons manager is exactly the right place to look for it. please try disabling the addons that are listed there one-by-one (a restart of the browser might be necessary after each step). maybe one of them is bundling this kind of adware.
[[Disable or remove Add-ons]]

Service Registry : Services does not show under Service definitions..

Hi All,
I am new to PI ..
My PI system is 7.11 ..DB DB2
Query is that when i start PI tools and click on service registry under service definitions it does not show any services..
Do i have to publish services so that it can be accessed from the mentioned location..or is there any other configuration that i need to execute..
Regards
Sohal....

Hi Sohal,
You may want to refer to:
#1267817 - Configure Services Registry proxy (ServicesRegistrySi)
Also, check the following links that may aid you with that:
http://help.sap.com/saphelp_nwpi71/helpdata/en/46/94dd02c7b915ebe10000000a114a6b/frameset.htm
and
http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/cc8fd368c873dfe10000000a11466f/frameset.htm
Regards,
Caio Cagnani

LR2.7 does not bring up images from Nikon D7100

LR 2.7 does not bring up images from Nikon D7100 which I have just purchased. I have downloaded latest DNG raw converter 7.4 but does not work. The images come through fine in Bridge but not Lightroom. What is the problem?

Since camera makers insist on their own proprietary file formats, Adobe must provide support for each new camera as it is introduced. When a new version of Lightroom is released all development and support for the previous version ends. Your camera wasn't even mentioned or introduced when Lightroom 2.7 was released. Consequently, there can be no support for it. When you buy the newest camera model you should expect to also buy updated software to support that camera. In any event, the raw processing in the latest version of Lightroom is so far superior to what you have you really need to upgrade your Lightroom. You might consider using the Lightroom 5 beta until the official release.
Are you sure the DNG converter doesn't work? You only point it to the folder containing your raw files. The DNG converter doesn't list the contents of the folder. You will only see a list of your NEF files after you click the button to convert them.

I have just updated my photoshop cc, but now when I go into filters it does not show my Topaz or when i go to automate it does not bring up my Perfect photosuite 8

I have just updated my adobe cloud programmes, but when I am in Photoshop cc 2014 it now does not bring up my Topaz Filters or my Perfect Photosuite8, any ideas please

As a workaround, I placed shortcuts from my Topaz plugins in my old CC 64bit plugins folder, in the plugins folder of CC 2014 64bit. The plugins seem to work ok in CC 2014. Note that CC 64 bit itself is uninstalled but the plugins folder remains.
I know this is not good practice but it works and I'll stick with it till there's a solution from Topaz or Adobe. The advice from Topaz so far was not helpful.

On a Mac v10.6.6 Firefox v3.6.13 Right click on Google Map does not bring up the drop down box, with the first item being directions from here, the right click does work on Google map when using Safari

On a Mac v10.6.6 Firefox v3.6.13 Right click on Google Map does not bring up the drop down box, with the first item being "directions from here", the right click does work on Google map when using Safari

Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 9.0 r999
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
http://java.com/en/download/faq/firefox_newplugin.xml
See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html

ADS does not work.(Service call exception)

Hi All,
According to SAP note 937697 "Usage of SAP NetWeaver BI Diagnostics & Support Desk Tools", when running the tool, it gives following error:
ADS does not work.(Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL was:"http://sapbwd.ni.ad.newsint:50000/AdobeDocumentServices/Config?style=document")
I have been looking into system to find out how to solve the issue, but could not, is there anyone who can help me with exact instructions what I do need to do.
Thanks in advance
sahmad

Dear Sahmad,
I would suggest you to check notes 1004321 and 944221. The first one says that mostly of this kind of issues (and I have already seen several ones) is caused for bad passwords for user ADSUSER or this account expired. The second note is a troubleshoot note you can also do.
You can also follow this procedure to check that:
Please open the Visual Administrator and browse to Server -> Services -> Security Provider -> Policy Configurations
In the Components tab you will see the service.destinations policy. Click on this and then click on the AccessDestinations security Role. Modify this and add the J2EE_ADMIN/Administrator user to this role and save.
Maybe the password is not set correctly as well. I think it worths to be set it again. First you have to identify where your ADSUSER maintained.
Go to http(s)://<SERVER>:<PORT>/useradmin search for ADSUSER If Datasource:
- LDAP -> check psw of ADSUSER in LDAP and enter it in SM59
- UME data -> check psw of ADSUSER in Visual Admin and enter it in SM59
- ABAP -> check psw of ADSUSER the ABAP system in the following client:
Visual Admin->UME Provider->Properties->ume.r3.connection.master.client
If you want, also, you can change the ADS by the SAP Export Library, as per SAP Note 1112132. It is very simple to activate and will bypass ADS, doing every function ADS does.
I hope it helps.
Kind Regards,
Marcio

When in Lightroom 2.3 edit in Photoshop does not bring up image in Photoshop

When in Lightroom 2.3, you go to edit in and select Photoshop, it opens Photoshop CS6 but does not bring the image in. This has only happened recently and maybe I have done something to make this happen as it never used to happen. What can I do to figure this out?

First, update your LR 2.3 to 2.7. The update is free and should help with some things: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4677
If after updating Lightroom, it doesn't start working, initiate a repair install of Photoshop CS6.

Just updated itunes now menu bar has dissapeared no black and white box at top left and ctr b does not bring anything up. i need file view etc please help driving me crazy

just updated itunes now menu bar has dissapeared no black and white box at top left and ctr b does not bring anything up. i need file view etc please help driving me crazy

Is the iTunes window in FullScreen mode?
If so, press esc key.

Bulletin Board boot does not bring up services

Similar Messages

Maybe you are looking for