Bunch of workflows just got stuck in the production... may be close to 300!
The stuck workflows doesnot have error statuses, it is just stuck. Does'nt come up in ST22 or whatever. I need these going... Should I restart them? Well these happened exactly at the same time when the production environment was very slow yesterday... Please let me know the best way to solve.. Appreciate your help in advance...
Thanks,
Sukumar.
Hi Sukumar,
Just execute SWPC tcode for the particular date range. If all the workflows are stcuk they will appear here. Before restarting check the workflow log (Step History) tab of the workflow log and diagnose each step why the workflows where. You can Continue workflow using the same tcode (SWPC) if they were really stuck.
Let me know if you have queries.
Regards,
Raj
Similar Messages
-
i tried to restore the iphone In a windows pc and on a Mac. when i restored my iphone on the Mac the iphone worked 2 times then it happen again the same problem...
http://support.apple.com/kb/ts3694#error4000
Error 4000, 4005, 4013, 4014, and 4016
After you perform each step, try to restore your device.
Restart your computer.
Disconnect all your USB devices from your computer and connect to another USB port.
Use a different USB cable.
Uninstall third-party security software.
Try restoring using an alternate computer. -
Macbkpro got stuck on the loading screen after upgrading
I updated my macbkpro to yosemite
It restarted and I login as usual and can see the new os
But then it broke down and I reboot it and it just got stuck on the page with an Apple logo and a loading bar. It loads until like one fifth of the bar and stops and doesnt proceed to the login page.
I keep rebooting and waiting but it just doesnt move a bit anymore.
What can I do now@hei320 I had the exact same issue as you.
Resetting the PRAM worked for me.
https://www.google.com/search?q=reset+the+PRAM&oq=reset+the+PRAM&aqs=chrome..69i 57&sourceid=chrome&es_sm=93&ie=UTF-8 -
Dear all, I have a MacBook Pro bought in April 2011. Last April, it got stuck while the wheel was spinning and I had to force it shut. That cost me my hard drive. Now, it's stuck again. I tried esc, cmd+tab, moving the trackpad on the apple, but no. HELP!
Dear John,
thank you for your prompt reply. After I sent the email, I left the wheel spinning to see if it would eventually stop. It didn't, but after a while the screen turned blue, so I decided to switch everything off with a forced shut-down. I could not restart with the OS DVDs because I am currently away from home, but fortunately everything was more or less fine after restarting. It then got stuck again, I forced it shut again, restarted again, and now it seem to work but I won't overdo it and will switch off smoothly after writing this (unless it gets stuck again). Last April I have replaced the HD, so it's now just under 6 months old. And, of course, since the crash occurred when I was abroad and had backed up just before I left, I have lost only a few days' work. Still, and I know this will make me hugely unpopular here, with my 5 previous laptops running on MS Windows I never had a problem. Which does not mean I loved the OS, or I would not have switched to Mac.
Anyway, and this is the main reason for this message, thank you very much again for your speedy intervention.
Claudia -
Just got back from the Apple Store...optical drive officially dead
I just got back from the Apple Store, which confirmed what I feared all along. I received my MBP C2D over the holidays and was worried when it had trouble booting up several times. After trying to burn a few cds (some would quit, others worked fine), and a few discs that refused to read or eject I visited the boards to find out that issues with the Matshita UJ 587 were widespread. At this point my computer does not even recognize the ATA or Disc Burning hardware or the OSX disc inside. The only positive to come out of this is the customer service offered by Apple. I took the computer to the genius bar and the computer refused to boot up after the tech installed an OSX disc (hence the stuck cd inside). They are giving me a new computer since this one is brand new, but unfortunately I will have to order it from Apple Care since it is a custom job. For all of you out there with early MBP C2D optical drives that are acting up I feel your pain. Get your computer into an Apple store before the problem gets worse, these optical drives are awful.
Macbook Pro Core 2 Duo 2.33 Ghz Mac OS X (10.4.8)Thank you. After 2 hours on the phone with Apple Care this morning they finally confirmed what the Mac Genius told me last night. The computer was shipped back this afternoon and I'll post again if there's any trouble with the new unit, I think I just got a lemon with this one...too bad. This is my first Mac so I'm really trying hard to stay positive.
-
Hello. My iphone 4 got stuck on the itunes logo. I had to restore it and have lost everything. Is there anything I can do to get my photos back?
Not easily, the recovery mode erases the device, but you can see if any of these data recovery tools may work: https://discussions.apple.com/docs/DOC-1689
-
I'm trying to update my daughter's Ipad2 to the new IOS 8 and it's got stuck on the connect to ITunes display. We don't have a computer to connect it to and it's never been connected to one. How do I get past this?
You can try a soft-reset of pressing and holding both the home and sleep buttons for 10 to 15 seconds so that it reboots, but you are likely to get the same screen. If it does then it will need to be connected to a computer's iTunes so that it can be reset back to factory defaults - do you have a friend with a computer with iTunes installed on it, or is there an Apple store nearby that you could try going to (if there is then preferably make a Genius Bar appointment at it, or don't go at a busy time) ?
Has she been backing up to the cloud ? If she has then she should be able to restore to that. If not then what she can redownload for free from the stores will show in the Purchased tabs in the store apps. -
In trying to update my iPhone 3Gs from v. 3.13, it apparently downloaded the upgrade, but got stuck during the backup. It backed up for over an hour, and now the green bar in the Backup window is now colorless and is showing no movement. Any suggestions?
In trying to update my iPhone 3Gs from v. 3.13, it apparently downloaded the upgrade, but got stuck during the backup. It backed up for over an hour, and now the green bar in the Backup window is now colorless and is showing no movement. Any suggestions?
-
I bought CS6 and it got stuck in the downloading process, do I try download again? a different brows
I bought CS6 and it got stuck in the downloading process, do I try download again? a different browser? Please help! I used DSL.
Yes, Please go ahead and try downlading again.
-
My SIM card got stuck in the iPhone 5c SIM slot but without the tray how will i get it out
My SIM card got stuck in the iPhone 5c SIM slot but without the tray how will i get it out
Go to an Apple Store or you're wireless carrier store to have them properly remove the SIM card.
-
Help I just get stuck with the blank screen and the white circle
help I just get stuck with the blank screen and the white circle after i erase all content and setting
i dont know how to do pls help.Try connecting the device to your iTunes library and restoring it. If necessary place the iPod into recovery mode using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock -
Hi!! I was updating my iPhone 4s to ios 6 and It got stuck on the recovery mode and I had to do a company restore!!
Unfortuntately I lost all my photos including images of my daughters birth of which I had not taken a backup
Is there any possibility of recovering the same? my wife is going to kill me!!No backup, nothing to recover.
-
Two Macbook pros circa 2009 in our temporary household in Turkey suddenly failed to boot and got stuck on the grey screen. They were able to boot at the Apple store, but not when we brought them back to our apartment. Could this be a coincidence? A
THank you Ogelthorpe. When my wife's computer I went on line to the site that you sent and tried everything But nothing worked. When my son came to visit and his MacBook Pro did exactly the same thing we became suspicious - too much of a coincidence. We took both computers somewhere else, out of our apartment, and they both booted. We ran disk utility on both, but the report in both cases was that there are no issues with the hard drive. Back in our apartment neither will boot up. My MacBook Pro is a later model with a solid state drive and it seems to work fine here.. I tried an external drive and it works fine. We think that this has something to do with some kind of magnetic interference in our apartment to which the 2009 drives are susceptible. It is indeed a mystery!
alf -
So I just updated my MacBook (2009 model) to Maverick and I tried signing into Facetime and iMessage but it just stays stuck in the log in screen. Any help?
same problem, its driving me crazy, never had this crap with any other phone
-
Item got stuck with the status of "Ready to Release"
I have one iten with huge quantity in Sales order.. i have transacted it.. but now there is some change in qunatity .. so now i am trying to backorder this line, now when i back ordered the line... some of it`s items got stuck in the status of Ready to Release status... i have released the sales order 3 times still it`s status is not changing.. can you tell me how to solve this issue.. i want to back order the line, which is stuck in the status of Ready to Release status...it`s little urgent...
ThanksHi,
Are there any ship sets? Is the order or order line on hold?
How are you releasing these order lines: from Transactions form or from Release Sales Order Form? If you are using transactions form, what is your default staging sub inventory? Is your item enabled to be transacted in this sub inventory? Is the sub inventory under locator control? If so, have you defined a default stage locator?
If you are using Release Sales Order Form, in folder Order, did you change the order parameter from “Unreleased” to “All”? Is Prior Reservations Only checked? If so, uncheck it. If it is checked; only orders with reservations will be released.
Regards,
Ketter Ohnes
Maybe you are looking for
-
For my project, I am using a last year student's VI as reference, but when loading it up, it asks for a "AI Acquire Waveform.VI" which I cannot be found, and there is no "data acquisition" tab under which it is normally found according to the manual,
-
Newbie: First time creating a form
I created a form using LifeCycle. I distributed the form. Now I have to make additional changes. Is there a way to replace certain pages with new ones without losing the fields and drop-downs I have already created. Also, once the form is distributed
-
Can I install 8 on the same machine where I have 7?
Can I install app server 8 on the same machine where I have app server 7 installed already? Are there any conflicts that I need to be aware of?
-
the installation has placed the csdb folder on the system disk. we would like to relocate this to an alternative device if possible. can you outline the procedure for relocating the calendar database?
-
I have purchased 200 units of windows server 2012 Device CALs under volume licensing and I need some clarification with regard to transferring of CAL license if I replace it with a new machine .