Bundle-Ether between MSC card and FP140 card on CRS-3

Hi,
Currently we have implemented a Bundle-Ether between 3 interfaces in MSC Card (8x10GE) and now we are planning replace one MCS Card by one FP-140 Card (14x10GE), so I would like to know if there is any risk or any incompatibility to form Bundle-Ether with 2 interfaces of MSC card and one interface of FP-140 Card.
Regards,
Jaime Soto.

Hi Jaime,
as far as i know there is no issue with splitting the bundle between MCS and FP-140 cards.
wbr
/vadim

Similar Messages

Need technically the linkage between Shopping Card and PO (SRM).....

Hi SAP Gurus,
I am using SAP SRM 7.0 and wanted to find out:
1) Technically the linkage between Shopping Card and PO (SRM). (Basically looking for required table names and the fields)
2) Technically the linkage between Shopping Card and Reservation (SRM) . (looking for required table names and the fields)
Thanks....

Hi Siobhan
thanks. but every customer wants to know what happened to his cart if the status is COMPLETED or not. Why SAP missed this small piece of functionality to show COMPLETED status via WEb transaction. I can see only this via REDISTRIBUTION WORKLOAD transcation status. right hand side green tick mark. this green mark totally mislead every body. mixuter of status shows green tick mark (COMPLETED + FOLLOW ON DOCUMENT CREATED etc) in redistribution mark.
Appreciate your reply .
I tell you in detail .
for ex CART went to ERROR IN PROCESS but no where the requestor can see his cart and he got dismayed and admin can see his cart . ok. if i go see in redistribution menu it shows COMPLETED logo. it mislead whole business.
Muthu

HT1918 hi I'm travelling between two countries and i have a credit card and address in both, can i set up my itunes account to switch between the respectice i tunes stores

hi I'm travelling between two countries and i have a credit card and address in both, can i set up my itunes account to switch between the respectice i tunes stores

Not a single account, no, at least not easily. It would be better to set up individual iTunes Store accounts, one in each country. Your computer and devices can quite happily deal with two accounts, and then you can just log into the appropriate account when you're in the applicable country. You'll need a second email address to able to create a new Apple ID.
Regards.

Differences between Java Card 2.1.1 and Java Card 2.2

Hi guys, how are you?
My name is Érica and I’m taking Electric Engineering and I love mobile communication.
I’m reading a PDF about SIM cards for cellular networks and I have a doubt that is “killing” me!
What is the most relevant differences between Java Card 2.1.1 and Java Card 2.2?
Could you please help me?
Best regards.
Thanks in advance.
Érica Borsato de Souza Lima – Rio de Janeiro/Brazil

2.2.x API will be more complete than 2.1.x, just compare the javadocs and specs.

IP Failover between nic cards, not servers

This maybe a very simple question, I just haven't found the answer to it...
Our Xserve's are running on a Cisco switch and a switch port for the primary NIC card of one AFP server recently failed.
While the server had both cards connected to the switch and the second NIC card was live, the users lost connectivity to the internal server address (internal DNS) as is was pointing only to the primary IP address of that server.
This makes sense as there was no mechanism to tell the server to start using the secondary IP address.
We are now planning to connect all secondary NIC's to a second switch for both the LAN and the DMZ (VLANs) for better redundancy.
The DMZ uses IP addresses only due to port forwarding.
My question is now what is the best way to continue services on a secondary NIC if the first NIC fails.
Add a new DNS entry for the LAN? If so, how? Just enter the secondary NIC IP with the same server name?
Use FAILOVERBCASTIPS for the DMZ?
IP Failover works great between machines, but can the server send heartbeat messages to itself (example: FAILOVERBCASTIPS="NIC1-IP NIC2-IP")?
Is there any way to maintain the mount status of AFP volumes during the switch of IP's (since it's still the same machine)?
Thanks in advance for your help!
Xserve G5 Mac OS X (10.4.3)

Since you're using Cisco switches and are already familiar with VLANs, your simplest solution would be to use link aggregation to create a trunk between the Mac and the switch using both the NICs, then configure VLANs so that both subnets use the trunk interface rather than the physical interfaces.
That way traffic for either IP address can traverse either NIC, and you get automatic failover (thanks to link aggregation) should either NIC fail.
Note that this will only work if you're connecting to the same switch. If you have 'internal' and 'external' switches this won't work without some re-architecting of the network topology.

Mid-2012 RMBPro 10.9.4: Is it possible to switch between graphic cards? Activity monitor shows the high perf card always active even through no running apps need it.

How does one switch between graphics cards on a RMB Pro that has both a regular and high performance card installed?

There's no control built into OS X to manually switch between them (that I know of). But in your Energy Saver preferences, there is setting called Automatic Graphics Switching that will either keep the discrete GPU on all the time, or automatically switch it off when not in use. Do you already have this preference turned on?
It might keep the high performance graphics card on if it's plugged into AC power, since there is no battery life penalty in that case.

How is the difference between CRS-MSC-B and CRS-MSC-40G-B

How is the difference between CSC-MSC-B and CSC-MSC-40G-B and it can be used interchangeably or not ?
thanks for your kindness

Hello Marut,
That is the same HW, no difference.
Regards,
/A
Please visit http://cisco.com/go/testdrive or contact your account rep to schedule nV tech demo.

I am currently on the Photoshop and lightroom cc bundle, but for my coarse i need InDesign, if i upgrade to full package ($600) do i get that aswell? is it a dramatic difference between the cc and Cs6? would it be better to invest in it, and can i do a pa

I am currently on the Photoshop and lightroom cc bundle, but for my coarse i need InDesign, if i upgrade to full package ($600) do i get that aswell? is it a dramatic difference between the cc and Cs6? would it be better to invest in it, and can i do a payment plan?

The complete CC has indesign included in it.
Regarding your second question: CC is the advanced version of CS6 with advanced & additional features & functions.
The payment plan for education will suit you the best since you are studying.
Please refer to Adobe Creative Cloud for students and teachers | Adobe
Student software discounts, student eligibility | Adobe
Regards
Rajshree

What is the difference between cluster patch and bundle patch

hi every one
can any one please tell me the difference between cluster patch and bundle patch ... for what purpose we apply cluster patch and bundled patch

There is no inherent difference between a patch cluster and a patch bundle that I am aware of.
Its just a name for collections of patches.
For whatever reason, the regular collections of recommended patches that sun puts out happen to be referred to as the recommended patch cluster.
The "all patches to bring you up to 5/08" that sun is putting out happens to be being called the 5/08 patch bundle.
I don't think they meant anything by the distinction. But thats the first time the term "patch bundle" has been used that I'm aware of.
So maybe there is some new patch delivery/installation technology implied. But I doubt it.

Data exchange between Oracle DB and JD Edwards

Hi all,
We have an Oracle 10g EE database which we maintain. The financial system is using JD Edwards. We need to provide them some daily information(payments) Also they need to send us some data( payment reconciliation). My questions are:
1. What kind of interaction is posible between Oracle db and JD Edwards?
2. What database does JD Edwards internally use? Is in an Oracle db?
3. Is there an ODBC driver available for interaction?
4. Does JD Edwards handle credit card payments?
Please, can you give me an answer quick, we need it by the end of today for a proposal..
Excuse my lack of knoledge, but we never worked with JD Edwards before...
Thank you

#2 All the JD Edwards installations I have ever come across were on AS400 (iSeries I believe is the new name) â¦their niche on the application software market was the fact that they were running so well integrated with that particular platform. AS400 comes bundled with [one of the many flavors of] DB2 â¦ that is, no extra license required. Oracle has never had an AS400 port â¦ so I doubt youâll find Oracle underneath your JD Edwards installation.
#1 âsome daily payment informationâ suggests batch type integration and relatively small in scope â¦ all systems/applications have some sort of data loader and there are always ways to get data out into files â¦ so a custom, file-based little integration mechanism could be all that you need. I did work once in such a little project â¦ the JD Edwards specialists in the company did their part of loading and loading on their side â¦ we did the same on the Oracle side â¦ we agreed on file formats, content, schedules, a common/secure drop zone in the network etc. and that was pretty much it. The point is, there must be some JD Edwards people in your company you should get involved in the discussion/proposal.
#3 An ODBC driver for DB2 on AS400 very likely exists â¦ keep in mind though that this means the integration will be at a low level (table level) â¦ many applications expose integration points at the API level (application level). Again, you have to get the JD Edwards people on board.
My last points â¦ if you have Oracle in house then call your Oracle representative â¦ Oracle owns JD Edwards â¦ you may get better answers or re-directs there. Also look if your company has any middleware software already â¦ contact the vendor and see what they have to say

(Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
Let me know if you know why this is happening.

With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
Something you can try:
System Preferences -> Network
Gear icon on the bottom left, next to the [+] [-] icons.
Select *Set Service Order...*
Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

Routing issue between Cisco device and Virtual machine

Hi Guys,
We have two local subnets in a virtualized environment, subnet 1 has a VM operating as a firewall, we would like all traffic for subnet 2 to go via VM on subnet 1, this will police traffic on subnet 2 and then reroute.
The infrastructure involved comprises,
Internet Edge Switch -> ASA -> Core Switch -> IBM Flex chassis
The Internet edge switch is directly connected between the ISP routers and the Cisco ASA firewall pair (A/S). The ASA is then connected to the Core switch. Connected from the core switch is an IBM Flex chassis, via a port channel (all vlans allowed)
The local subnets in question are as follows:
Vlan 101 (10.1.1.0/24)
Vlan 102 (10.2.1.0/24)
The VM in question has two NIC cards having IP address of both subnets.
NIC 1: 10.1.1.1
NIC 2: 10.2.1.1
We would like packets destined for 10.2.1.1 to land on 10.1.1.1 IP address. At the moment traffic for each vlan routes from the outside to their respective local subnets successfully, what we are having difficulty with is directing traffic for subnet 2 via subnet 1 VM firewall.
At the moment we have tried adding a static route on the core switch but it didn’t work
ip route 10.2.0.0 255.255.255.0 10.1.1.1
I will appreciate if you could share your knowledge and guide me how to achieve this goal.
Thanks in advance :-)

Hi,
I think for this to work you need a transit vlan between the VMs and the core switch. So, if you have 2 vlans on the VM (101 and 102) you use the VM switch to route between the vlans and in order to go outside the local vlans you would use the core switch. In this scenario you would not have an SVI (layer-3) interface on the core. The only thing that core will have is the layer-2 vlans (101 and102). You would than need a static route on the core switch to point to the transit vlan on the VM side.
so, for example, if the transit vlan is vlan 110 and the ip is 192.168.1.0/24
on the core you have static routes:
ip route 10.1.1.0/24 192.168.1.2 (VM side)
ip route 10.1.2.0/24 192.168.1.2 (VM side)
You also need an SVI for vlan 110 with ip address 192.168.1.1/24 on the core.
on the VM you need a default route to point to the core (192.168.1.1).
Is this what you are trying to do?
HTH

Kernel Panic while transfering data between MAC HD and network drives

Kernel Panic while transfering data between MAC HD and network drives. it's an iMAC 24" 2011. Snow Leopard 10.6.8. I can't seem to find the cause to this.Thank you guys !
Here is the log fine with error code:
Error code: 0x0000000000000000
Interval Since Last Panic Report: 5 sec
Panics Since Last Report:          1
Anonymous UUID:                    3C5AA43F-D876-4F9D-A831-D8043218C6E0
Tue Aug 16 14:54:46 2011
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff7f815c6b54, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000005, CR3: 0x0000000000100000, CR4: 0x0000000000040660
RAX: 0x0000000000000000, RBX: 0xffffff8000000000, RCX: 0x0000000001000000, RDX: 0xffffff8013ae9200
RSP: 0xffffff80de173ea0, RBP: 0xffffff80de173ed0, RSI: 0x0000000000000000, RDI: 0xffffff8013ae9200
R8: 0x0000000000000001, R9: 0x0000000000000000, R10: 0x0000000000000000, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff8016207008, R14: 0xffffff8015a228f8, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f815c6b54, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff80de173b40 : 0xffffff8000204d15
0xffffff80de173c40 : 0xffffff80002d1208
0xffffff80de173d90 : 0xffffff80002e3f4a
0xffffff80de173da0 : 0xffffff7f815c6b54
0xffffff80de173ed0 : 0xffffff80002524fe
0xffffff80de173f00 : 0xffffff8000478c7f
0xffffff80de173f40 : 0xffffff7f8159b158
0xffffff80de173fa0 : 0xffffff80002c8527
      Kernel Extensions in backtrace (with dependencies):
         com.thursby.kext.cifs(5.1)@0xffffff7f815ae000->0xffffff7f815cffff
            dependency: com.thursby.kext.NetBIOS(5.1)@0xffffff7f8158b000
         com.thursby.kext.NetBIOS(5.1)@0xffffff7f8158b000->0xffffff7f815adfff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:32:41 PDT 2011; root:xnu-1504.15.3~1/RELEASE_X86_64
System model name: iMac12,1 (Mac-942B5BF58194151B)
System uptime in nanoseconds: 105374280984
unloaded kexts:
(none)
loaded kexts:
com.vmware.kext.vmnet            3.1.3
com.vmware.kext.vmioplug       3.1.3
com.vmware.kext.vmci                3.1.3
com.trendmicro.kext.KERedirect              1.0.0
com.trendmicro.kext.filehook   1.5.0
com.vmware.kext.vmx86            3.1.3
com.thursby.kext.cifs    5.1
com.thursby.kext.NetBIOS         5.1
com.apple.filesystems.smbfs     1.6.7 - last loaded 60402747883
com.apple.filesystems.autofs    2.1.0
com.apple.driver.AppleTyMCEDriver      1.0.2d2
com.apple.driver.AppleHWSensor           1.9.3d0
com.apple.driver.AudioAUUC    1.57
com.apple.driver.AppleUpstreamUserClient      3.5.7
com.apple.driver.AppleMikeyHIDDriver                1.2.0
com.apple.driver.AppleMCCSControl     1.0.20
com.apple.driver.AppleIntelPenrynProfile           17
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleMikeyDriver       2.0.5f14
com.apple.kext.ATIFramebuffer              6.3.6
com.apple.driver.AppleBluetoothMultitouch     54.3
com.apple.driver.AppleIntelHDGraphics               6.3.6
com.apple.driver.AppleIntelNehalemProfile       11
com.apple.driver.AudioIPCDriver             1.1.6
com.apple.driver.AppleHDA       2.0.5f14
com.apple.driver.AppleGraphicsControl               2.10.6
com.apple.ATIRadeonX3000       6.3.6
com.apple.iokit.AppleBCM5701Ethernet              3.0.5b8
com.apple.driver.AppleIntelMeromProfile          19
com.apple.driver.AirPort.Atheros9388   426.35.3
com.apple.driver.ACPI_SMC_PlatformPlugin      4.7.0a1
com.apple.driver.AppleLPC         1.5.1
com.apple.driver.AppleBacklight              170.0.46
com.apple.kext.AppleSMCLMU                1.5.2d10
com.apple.driver.AppleIntelSNBGraphicsFB        6.3.6
com.apple.driver.AppleUSBCardReader                2.6.1
com.apple.driver.AppleIRController        303.8
com.apple.iokit.SCSITaskUserClient        2.6.8
com.apple.iokit.IOAHCIBlockStorage      1.6.4
com.apple.driver.AppleUSBHub               4.2.4
com.apple.driver.AppleFWOHCI               4.7.3
com.apple.BootCache   31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib                1.0.0d1
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.driver.AppleAHCIPort             2.1.7
com.apple.driver.AppleUSBEHCI              4.2.4
com.apple.driver.AppleUSBUHCI             4.2.0
com.apple.driver.AppleACPIButtons      1.3.6
com.apple.driver.AppleRTC        1.3.1
com.apple.driver.AppleHPET      1.5
com.apple.driver.AppleSMBIOS                1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC      1.4
com.apple.driver.AppleIntelCPUPowerManagementClient         142.6.0
com.apple.security.sandbox       1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall           2.1.12
com.apple.driver.AppleIntelCPUPowerManagement     142.6.0
com.apple.driver.AppleProfileReadCounterAction           17
com.apple.driver.AppleProfileTimestampAction               10
com.apple.driver.AppleProfileThreadInfoAction               14
com.apple.driver.AppleProfileRegisterStateAction          10
com.apple.driver.AppleProfileKEventAction       10
com.apple.driver.AppleProfileCallstackAction    20
com.apple.iokit.IOSurface           74.2
com.apple.iokit.IOBluetoothSerialManager         2.4.5f3
com.apple.iokit.IOSerialFamily   10.0.3
com.apple.driver.AppleHDAHardwareConfigDriver          2.0.5f14
com.apple.driver.IOBluetoothHIDDriver               2.4.5f3
com.apple.driver.AppleMultitouchDriver             207.11
com.apple.driver.DspFuncLib     2.0.5f14
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib                1.3
com.apple.driver.AppleSMBusController              1.0.10d0
com.apple.iokit.IOFireWireIP     2.0.3
com.apple.iokit.AppleProfileFamily         41
com.apple.driver.AppleHDAController   2.0.5f14
com.apple.iokit.IOHDAFamily     2.0.5f14
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily      1.10
com.apple.driver.IOPlatformPluginFamily            4.7.0a1
com.apple.driver.AppleSMBusPCI           1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.iokit.IONDRVSupport              2.2
com.apple.driver.AppleSMC       3.1.0d5
com.apple.driver.AppleThunderboltEDMSink     1.1.1
com.apple.driver.AppleThunderboltEDMSource               1.1.1
com.apple.kext.ATI6000Controller           6.3.6
com.apple.kext.ATISupport        6.3.6
com.apple.iokit.IOGraphicsFamily            2.2
com.apple.driver.AppleThunderboltDPOutAdapter         1.3.2
com.apple.driver.AppleThunderboltDPInAdapter            1.3.2
com.apple.driver.AppleThunderboltDPAdapterFamily   1.3.2
com.apple.driver.AppleThunderboltPCIDownAdapter   1.1.6
com.apple.driver.AppleUSBHIDKeyboard             141.5
com.apple.driver.AppleHIDKeyboard     141.5
com.apple.driver.BroadcomUSBBluetoothHCIController               2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController        2.4.5f3
com.apple.iokit.IOBluetoothFamily         2.4.5f3
com.apple.iokit.IOUSBMassStorageClass              2.6.7
com.apple.iokit.IOSCSIBlockCommandsDevice   2.6.8
com.apple.iokit.IOUSBHIDDriver               4.2.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice      2.6.8
com.apple.iokit.IOBDStorageFamily        1.6
com.apple.iokit.IODVDStorageFamily     1.6
com.apple.iokit.IOCDStorageFamily        1.6.1
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.driver.XsanFilter        402.1
com.apple.iokit.IOAHCISerialATAPI         1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily              2.6.8
com.apple.driver.AppleThunderboltNHI               1.2.6
com.apple.iokit.IOThunderboltFamily    1.4.9
com.apple.iokit.IOFireWireFamily            4.2.6
com.apple.iokit.IOUSBUserClient             4.2.4
com.apple.driver.AppleFileSystemDriver              2.0
com.apple.iokit.IOAHCIFamily    2.0.6
com.apple.iokit.IOUSBFamily     4.2.4
com.apple.driver.AppleEFIRuntime         1.4.0
com.apple.iokit.IOHIDFamily      1.6.6
com.apple.iokit.IOSMBusFamily                1.1
com.apple.security.TMSafetyNet             6
com.apple.kext.AppleMatch      1.0.0d1
com.apple.driver.DiskImages     289
com.apple.iokit.IOStorageFamily              1.6.3
com.apple.driver.AppleACPIPlatform     1.3.6
com.apple.iokit.IOPCIFamily       2.6.5
com.apple.iokit.IOACPIFamily    1.3.0
System Profile:
Model: iMac12,1, BootROM IM121.0047.B0A, 4 processors, Intel Core i5, 2.7 GHz, 8 GB, SMC 1.71f22
Graphics: AMD Radeon HD 6770M, AMD Radeon HD 6770M, PCIe, 512 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.35.3
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HDS722020ALA330, 1.82 TB
Serial ATA Device: OPTIARC DVD RW AD-5690H
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Officejet Pro 8000 A809, 0x03f0 (Hewlett Packard), 0x3612, 0xfd140000 / 5
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfd110000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 3
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x850b, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfa130000 / 5
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0xfa132000 / 8
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0xfa111000 / 6

There is something incompatible would be my guess. Did you disconnect all your peripherals in safe mode just to check?
You might now create a new temporary user account. Log into the new account. Do the panics still occur?
I would also visit The XLab FAQs and read the FAQ on diagnosing kernel panics. Sometimes they can be difficult to track down. Looking at each new panic log would help determine if it's cause is associated with the same extensions.

Lost connection between ovm-manager and ovm-server (ovm 3.1)

Hi,
I have a manager as a VM on my laptop and a physical server as an ovm-server. Everything is fine when i boot the server but after some time, the manager stop to show the information from the server. in the ovs-agent log file the following messages are repeated regulary
[2013-08-29 13:06:19 6160] DEBUG (notification:289) Trying to connect to manager.
[2013-08-29 13:06:20 6160] DEBUG (notification:291) Connected to manager.
[2013-08-29 13:06:20 6160] ERROR (notification:316) No manager Core API server object for 10:60:4b:88:bc:24:10:60:4b:88:bc:25:fe:ff:ff:ff.
[2013-08-29 13:06:34 6171] ERROR (notification:64) Unable to send notification: (111, 'Connection refused')
I did not reboot neither the server nor the manager. No IP change. Rebooting the manager has no effect.
The only way to restore communication is to restart the ovs-agent on the server, but this restart disable the network card. I must be physical on the server to restart the network.
any help will be very helpful
best regards
Jean-Marc

Hi,
The are many steps to verify:
Verify with your firewall on the Oracle VM Manager system (service iptables stop).
Verify with a ping between OVM Manager and OVM Server using the IP Address and using the hostname for each one (from OVM Manager : ping ovm-server ; and from OVM Server: ping ovm-manager).
I hope this can help you
Best Regards

Communication between a driver and application.

Communication between a driver and application.
I am writing a driver for a PCI card. I have found very good examples of how the driver should be build.
Where do I find the information about how the user mode application should be talking the driver.
So If you have any idea that will help me, please let me know.

Hi,Sir
This for your reference.
It will create pci adapter device node at /devices .
You can use AP function call ioctl to Communicate with your device driver.
static int
xxattach(dev_info_t *dip, ddi_attach_cmd_t cmd)
int instance = ddi_get_instance(dip);
switch (cmd) {
case DDI_ATTACH:
allocate a state structure and initialize it.
map the device�s registers.
add the device driver�s interrupt handler(s).
initialize any mutexes and condition variables.
create power manageable components.
* Create the device�s minor node. Note that the node_type
* argument is set to DDI_NT_TAPE.
if (ddi_create_minor_node(dip, "minor_name", S_IFCHR,
instance, DDI_NT_TAPE, 0) == DDI_FAILURE) {
free resources allocated so far.
/* Remove any previously allocated minor nodes */
ddi_remove_minor_node(dip, NULL);
return (DDI_FAILURE);
* Create driver properties like "Size." Use "Size"
* instead of "size" to ensure the property works
* for large bytecounts.
xsp->Size = size of device in bytes;
maj_number = ddi_driver_major(dip);
if (ddi_prop_update_int64(makedevice(maj_number, instance),
dip, "Size", xsp->Size) != DDI_PROP_SUCCESS) {
cmn_err(CE_CONT, "%s: cannot create Size property\n",
ddi_get_name(dip));
free resources allocated so far
return (DDI_FAILURE);

Bundle-Ether between MSC card and FP140 card on CRS-3

Similar Messages

Maybe you are looking for