Bundle problems with 11.3FRU1 agent
Hi!
Anyone else have problems with bundles not installing/launching on schedule with 11.3FRU1 agent? Also bundles set to launch at user login doesn't work first time the user logs in after workstation is booted, if they logout and in again then it will work?
Thomas
Originally Posted by CRAIGDWILSON
Look in your logs for any issues zmd-messages.log regarding accessing
"AppData". If so, that could be a known issue they are looking at,
though it is not really new but there are reports back to even 11.2.x
The reports are more of a timing issue on boot, but perhaps it could
relate to logon if that happened soon enough, though non of the reports
are for logon events.
On 6/25/2014 2:26 AM, thsundel wrote:
>
> Hi!
> Anyone else have problems with bundles not installing/launching on
> schedule with 11.3FRU1 agent? Also bundles set to launch at user login
> doesn't work first time the user logs in after workstation is booted, if
> they logout and in again then it will work?
>
> Thomas
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Technical Support Engineer
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
Nope, nothing refering to appdata (only thing it finds is appdatalrucache but that is probably not what you are asking for)...
I've now tried assiging the bundle both to device and to user but still nothing happes, works fine on our 11.2.x agent workstations.
Thomas
Similar Messages
-
Problem with starting OEM-agent on NT (clustered)
We have problem with starting the OEM-agent (9i) on Windows 2000. The Nt-server is clustered.
I have started the OracleAgent by the service screen. Everyting looks ok.
But, from the server where the OEM-console is installed I can't contact the
agent.
I stopped then the agent and started it by typing;
d:\oracle\ora92\bin\agntsrvc.exe
Than i get the error:
StartServiceCtrlDispatcher Failed with err 1063
Anyone an idea?
Thanks.
KlaasIncreate the virtual memory and try to start the service here:
SELECT START > CONTROL PANEL > ADMINISTRATIVE TOOLS > SERVICES
Joel Pérez -
Problem with Clean Access Agent and Windows Updater
I have a problem with a laptop when using Cisco Clean Access Agent. The agent keeps directing the laptop to get updates from the Windows Update site, but when I have connected the laptop via cable, windows updates tells me there are no updates either essential or optional. The laptop is a Sony VIVO VGN-FJ270 running XP Home Edition SP2 and the Clean Access Agent is version 4.0.2.1
Any help is appreciated!!Verify the allowed hosts in CCA agent.
Try these link:
http://www.cisco.com/en/US/products/ps6128/tsd_products_support_series_home.html
http://www.cisco.com/en/US/products/ps6128/products_qanda_item09186a00803b7a81.shtml -
I am having problem with Segate free agent drive.
Since I installed Mountain lion on my iMac 24" I am having problem with a previously installed Seagate drive. When I am in finder and click on the Free Agent drive, I get the following error. VTDecoderXPCService quit unexpectedly. I click reopen and a few seconds later I get same message. This did not occur when I was using Snow Leopard Very annoying. Any suggestions? Note I have many movies and important data on this drive and don't want to lose. What does this error mean and is there some way to correct?
http://changux.co/solving-vtdecoderxpcservice-quit-unexpectedly
-
Licensing problem with UCCX 7, agent not able to login at all
Hi there,
We have UCCX 7 server and CUCM 7.
Problem is that we the agents are not able to login and they are getting maximum license error although not all licenses are used.
We get the following errors when trying to login:
1. "Maximum number of licenses reached. Please notify your System Administrator".
2. When we click "Ok" for the error above, we get the following "A licensing error has occured. Please try again in five minutes. If the problem persists, please see your log file or System Administrator for details.".
I checked the licensing service and it is working fine.
The log for the licensing service is not indicating anything, it shows only the last time there was a failure in this service (this was 6 months ago after a restart). It was working fine until yesterday.
I tried to disable the "IPCC Extension" under the User Configuration in the CUCM and enable it again, but did not solve the problem and got the same error.
It is worth to mention that when I disabled the "IPCC Extension", before I enabled it again, I tried to login using CAD but I got the same exact error.
Any help will be really appreciate, thanks a lot.Hi
Open a command prompt on your UCCX server (not client) and go to this directory:
C:\Program Files\Cisco\Desktop\bin
Then run:
showlicenseusage.exe
THis will show you the IP addresses that are currently consuming licenses. You can check these PCs to see if they are still logged in - if they are, that's your problem. If they aren't, then you may have a problem with the LRM service or something.
If it has logins listed that aren't really logged in, you might be able to restart the License and Resource Manager service from Control Center to resolve it temporarily.
Aaron
Please rate helpful posts.. -
Problem with Cisco Secure agent instalaltion
Hi,
I am having problems with installing the Cisco Secure agent 5.2-203 on a RHEL 3.0 AS server.
I gives me the following error
[root@ABC CSCOcsa]# ./install_rpm.sh
Red Hat Enterprise Linux AS release 3 (Taroon Update 6)
Preparing packages for installation...
CSAagent-5.2-203
cc -DMODULE -D__KERNEL__ -Dlinux -Dkernel -I. -I/usr/src/linux-2.4/include -I../ ../../include/unix -pipe -Os -march=i686 -fno-defer-pop -fno-common -mpreferred- stack-boundary=2 -c symbols.c -o symbols.o
cc -DMODULE -D__KERNEL__ -Dlinux -Dkernel -I. -I/usr/src/linux-2.4/include -I../ ../../include/unix -pipe -Os -march=i686 -fno-defer-pop -fno-common -mpreferred- stack-boundary=2 -c fshook.c -o fshook.o
cc -DMODULE -D__KERNEL__ -Dlinux -Dkernel -I. -I/usr/src/linux-2.4/include -I../ ../../include/unix -pipe -Os -march=i686 -fno-defer-pop -fno-common -mpreferred- stack-boundary=2 -c hotpatch.c -o hotpatch.o
cc -DMODULE -D__KERNEL__ -Dlinux -Dkernel -I. -I/usr/src/linux-2.4/include -I../ ../../include/unix -pipe -Os -march=i686 -fno-defer-pop -fno-common -mpreferred- stack-boundary=2 -c adapt.c -o adapt.o
adapt.c: In function `kutil_vprintk':
adapt.c:3442: parse error before `char'
adapt.c:3443: `buf' undeclared (first use in this function)
adapt.c:3443: (Each undeclared identifier is reported only once
adapt.c:3443: for each function it appears in.)
make: *** [adapt.o] Error 1
Failed to build adaptation kernel module. Aborting
error: %post(CSAagent-5.2-203) scriptlet failed, exit status 1
./install_rpm.sh: installation failed
Would like to know where the dependancy is and what is needed to be installed for this installation to work.
JoelHi Joel,
The following packages are need to compile the 5.2 agent.
*GCC*
*kernel-snmp-devel*
*compat-libstdc++*
Also 5.2 error messages are alot less friendly than 5.1's -
Problem with the Forwarding agent in MIRO
Dear Guys ,
i have created 2 POs with 2 vendors V1 and V2 . Now in both the POs, the Forwarding agent is the same FA. We will maintain FA in both the POs with relevent Freight condition types and amounts too .The FA charges 10 rupees for V1 and 3 rupees for V2 . Now we have to do MIRO for both the POs in a single shot . Please help me regarding the sameHi,
Your Forwarding agent FA should be a vendor (lets say V3).You created two POs with vendors V1 and V2 and during PO creation, you should assign Freight condition types to V3 for both POu2019s.
Once you finish GR, then you can do MIRO for two POu2019s to vendor-V3
During MIRO,
Select Purchase Order/Scheduling agreement, enter PO number
Select Planned Delivery Cost
After entering PO number, next to that, you have icon, Click on u201CMore Allocation Criteriau201D and you can enter other PO number in next pop-up screen and adopt it. Now you can see both PO number with two values( 10 & 3) for Vendor-V3, simulate and post document.
Regards,
Biju K -
Problem with Oracle Intelligent Agent 8.1.7 Users Guide PDF
I can't view of print certain pages (51,64,68) from the PDF version of the Oracle Intelligent Agent Release 8.1.7 User's Guide (http://downloadeast.oracle.com/docs/cd/A87860_01/doc/em.817/a85251.pdf). Have tried from several PCs and still get the error.
Hi Terry,
Please try the following URL:
http://download.oracle.com/docs/pdf/A85251_01.pdf. I believe this file should be fine.
Thankyou for highlighting the issue. We shall address it as soon as possible so that the file at the link you provided will be fixed.
Thanks and regards,
Les -
Hi fols,
We got ASR 1002 for use as LNS and move VPDN settings from 7204 to ASR1002... Looks like PPPoE interfaces (customers works pefect) but MLP Bundle cant establish :(
Cisco Console Log:
Feb 13 05:00:13 104.234.254.1 21010: Feb 13 10:00:12.732: %CPPOSLIB-3-ERROR_NOTIFY: SIP0: cpp_cp: cpp_cp encountered an error -Traceback= 1#adfdffd320bd4b50a075756a85bafaca errmsg:7FB80973B000+121D cpp_common_os:7FB80C74C000+D8D5 cpp_common_os:7FB80C74C000+D7D4 cpp_common_os:7FB80C74C000+19A3E cpp_ifm:7FB81F747000+A158 cpp_mlppp_svr_lib:7FB815BBB000+C2F1 cpp_mlppp_svr_lib:7FB815BBB000+1CCA8 cpp_mlppp_svr_smc_lib:7FB815DF9000+2D28 cpp_common_os:7FB80C74C000+11E6E cpp_common_os:7FB80C74C000+118AA cpp_common_os:7FB80C74C000+116EB evlib:7FB80B72C0
Feb 13 05:00:13 104.234.254.1 21011: Feb 13 10:00:12.733: %FMFP-3-OBJ_DWNLD_TO_CPP_FAILED: SIP0: fman_fp_image: MLP bundle 174, link 170 download to CPP failed
Radius Log (look as well):
Fri Feb 13 04:59:41 2015 : Auth: Login OK: [[email protected]] (from client asr-lns1.xxxxx.com port 3445 cli BHVLPQ1004W lag-39:53)
Fri Feb 13 04:59:41 2015 : Info: Existing IP: x.x.x.x (did cli BHVLPQ1004W lag-39:53 port 3445 user [email protected])
Fri Feb 13 05:00:12 2015 : Auth: Login OK: [[email protected]] (from client asr-lns1.xxxxx.com port 3009 cli BHVLPQ1004W lag-39:53)
Fri Feb 13 05:00:12 2015 : Info: Existing IP: x.x.x.x (did cli BHVLPQ1004W lag-39:53 port 3009 user [email protected])
My Debug settings:
2# sh debug
PPPoE:
PPPoE protocol events debugging is on
PPPoE data packets debugging is on
PPPoE control packets debugging is on
PPPoE protocol errors debugging is on
MLP:
Multilink fragments debugging is on
Multilink events debugging is on
First bytes of multilink packet debugging is on
VTEMPLATE:
Virtual Template errors debugging is on
Virtual Template subinterface debugging is on
#sh log | in MLP
:01:13.742: Vi109 MLP: Dropped link Vi110 from bundle [email protected]
Feb 13 10:01:13.742: Vi109 MLP: Dropped last link, removing bundle [email protected]
Feb 13 10:01:13.742: Vi109 MLP: Removing bundle '[email protected]'
Feb 13 10:01:15.392: Vi111 MLP: Request add link to bundle
Feb 13 10:01:15.392: Vi111 MLP: Adding link to bundle
Feb 13 10:01:15.392: Vi111 MLP: Requested bundle vaccess creation
Feb 13 10:01:15.392: Vi111 MLP: Determine clone source for SSS
Feb 13 10:01:15.392: Vi111 MLP: Link is Virtual-Access, clone from Virtual-Template 1
Feb 13 10:01:15.395: Vi111 MLP: Determine clone source for SSS
Feb 13 10:01:15.395: Vi111 MLP: Link is Virtual-Access, clone from Virtual-Template 1
Feb 13 10:01:15.396: Vi111 MLP: SSS connect, bundle interface Vi112
Feb 13 10:01:15.396: Vi112 MLP: Changing bundle bandwidth from 100000 to 2000000
Feb 13 10:01:15.396: Vi112 MLP: Interleaving disabled
Feb 13 10:01:15.396: Vi112 MLP: Ready to finish adding link Vi111 to bundle
Feb 13 10:01:15.396: Vi111 MLP: Computed frag size 7499992 exceeds MTU, changed to 1496
Feb 13 10:01:15.396: Vi112 MLP: Update bundle bandwidth 2000000 set 2000000
Feb 13 10:01:15.396: Vi111 MLP: Change transmit status from Init to Enabled, transmit links 1
Feb 13 10:01:15.397: Vi112 MLP: Added first link Vi111 to bundle [email protected]
Feb 13 10:01:15.397: Vi111 MLP: Updating bundle's PPP handle[0xCE000105] in SSS context
Feb 13 10:01:15.398: Vi112 MLP: Received segment updated message for bundle
Feb 13 10:01:15.402: %FMFP-3-OBJ_DWNLD_TO_CPP_FAILED: SIP0: fman_fp_image: MLP bundle 179, link 178 download to CPP failed
Feb 13 10:01:17.694: Vi112: MLP: Bundle has 1/2 desired links, requesting another
Feb 13 10:01:43.097: Vi111 MLP: Change transmit status from Enabled to Idle, transmit links 0
Feb 13 10:01:43.097: Vi112 MLP: No previous member for idle link in '[email protected]'
Feb 13 10:01:43.097: Vi112 MLP: Update bundle bandwidth 2000000 set 2000000
Feb 13 10:01:45.102: Vi111 MLP: Request drop link from bundle Vi112
Feb 13 10:01:45.103: Vi112 MLP: Removing link Vi111 from bundle [email protected]
Feb 13 10:01:45.103: Vi111 MLP: Change transmit status from Idle to Init, transmit links 0
Feb 13 10:01:45.103: Vi112 MLP: Bundle bandwidth 2000000 unchanged
Feb 13 10:01:45.103: Vi112 MLP: Dropped link Vi111 from bundle [email protected]
Feb 13 10:01:45.103: Vi112 MLP: Dropped last link, removing bundle [email protected]
Feb 13 10:01:45.103: Vi112 MLP: Removing bundle '[email protected]'
2# sh ppp multilink
Virtual-Access126
Bundle name: [email protected]
Remote Username: [email protected]
Remote Endpoint Discriminator: [3] 4c60.de51.dd67
Local Endpoint Discriminator: [1] asr1002
Bundle up for 00:00:25, total bandwidth 2000000, load 1/255
Receive buffer limit 12192 bytes, frag timeout 1000 ms
Bundle is Distributed
Using relaxed lost fragment detection algorithm.
0/0 fragments/bytes in reassembly list
0 lost fragments, 0 reordered
0/0 discarded fragments/bytes, 0 lost received
0x0 received sequence, 0x0 sent sequence
Platform Specific Multilink PPP info
NOTE: internal keyword not applicable on this platform
Interleaving: Enabled, Fragmentation: Enabled
Member links: 1 (max 16, min 2)
BHVLPQ1004W:Vi125 (x.x.x.x), since 00:00:25, 7500000 weight, 1496 frag size, unsequenced
No inactive multilink interfaces
Border-ASR1002#sh users | in xxxxx
Vi129 [email protected] PPPoVPDN never
Vi130 [email protected] MLP Bundle 00:00:06
NO IP ASSIGNED and this SESSIONs will be close in 30-50 sec. Then start again by circle.
interface Virtual-Template1
ip unnumbered Loopback100
no ip redirects
no ip proxy-arp
ip mtu 1460
ip tcp adjust-mss 1420
load-interval 60
no peer default ip address
keepalive 30
ppp mru match
ppp authentication pap chap xxx-netwrok.com
ppp authorization xxx-netwrok.com
ppp accounting xxx-netwrok.com
ppp ipcp dns 8.8.8.8
ppp multilink
ppp multilink links minimum 2
ppp multilink interleave
ppp multilink endpoint string asr1002
end
interface Loopback100
ip address x.x.x.x 255.255.255.255
end
#sh ppp statistics
Type PPP Statistic TOTAL SINCE CLEARED
4 Transition Packet Drop 2 2
5 Interrupt Transition Packet Drop 5 5
14 PPP Handles Allocated 16620 16620
15 PPP Handles Freed 13971 13971
16 LCP Renegotiations 17 17
17 NCP Renegotiations 3 3
18 NCP Negotiations Failed 348 348
19 PPP Encapped Interfaces 4583 4583
24 LCP Timeout+ 2892 2892
25 NCP Timeout+ 89257 89257
26 LCP Timeout- 793 793
27 NCP Timeout- 9542 9542
28 Authentication Timeout 1984 1984
29 Configure-Ack Id mismatch 9 9
30 Configure-Nak/Reject Id mismatch 21 21
Type PPP MIB Counters PEAK CURRENT
1 Links at LCP Stage 13 2
2 Links at Unauthenticated Name Stage 240 0
3 Links at Authenticated Name Stage 4 0
7 Links at Local Termination Stage 2650 2647
8 MLP Links at LCP Stage 1 0
9 MLP Links at Unauthenticated Name Stage 1 0
10 MLP Links at Authenticated Name Stage 1 0
14 MLP Links at Local Termination Stage 3 0
20 Successful LCP neogtiations 14497 14497
22 Entered Authentication Stage 14497 14497
28 IPCP UP Sessions 2650 2647
48 CHAP authentication attempts 2 2
49 CHAP authentication successes 1 1
51 PAP authentication attempts 14495 14495
52 PAP authentication successes 7397 7397
53 PAP authentication failures 6141 6141
95 Total Sessions 2651 2647
96 Non-MLP Sessions 2650 2647
97 MLP Sessions 1 0
98 Total Links 2654 2649
99 Non-MLP Links 2653 2649
100 MLP Links 2 0
Type PPP Disconnect Reason TOTAL SINCE CLEARED
11 Missed too many keepalives 177 177
12 PPP Renegotiating 18 18
15 LCP failed to negotiate 1694 1694
17 Received LCP TERMREQ from peer 1465 1465
18 Received LCP TERMACK from peer while OPEN 2 2
24 Removing MLP Bundle 412 412
27 MLP Kill Link 4 4
29 Lower Layer disconnected 3187 3187
37 Received disconnect from Session Manager 174 174
54 User failed PAP authentication 6141 6141
55 AAA Server did not respond 695 695
57 Authentication timeouts exceeded 2 2
If i try look show interface for two interface in bundle i see like this:
Border-ASR1002#sh int Vi24
Virtual-Access24 is up, line protocol is up
Hardware is Virtual Access interface
Interface is unnumbered. Using address of Loopback100 (x.x.x.x)
MTU 1442 bytes, BW 2000000 Kbit/sec, DLY 100000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation PPP, LCP Open, multilink Open
REQsent: IPCP
MLP Bundle vaccess, cloned from Virtual-Template1
Vaccess status 0x44, loopback not set
Keepalive set (30 sec)
DTR is pulsed for 5 seconds on reset
Border-ASR1002#sh int Vi28
Virtual-Access28 is up, line protocol is up
Hardware is Virtual Access interface
MTU 1500 bytes, BW 2000000 Kbit/sec, DLY 100000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation PPP, LCP Open, multilink Open
Link is a member of Multilink bundle Virtual-Access24
PPPoVPDN vaccess, cloned from Virtual-Template1
Vaccess status 0x44
Protocol l2tp, tunnel id 64648, session id 34181, loopback not set
Keepalive set (30 sec)
DTR is pulsed for 5 seconds on reset
Looks like normal. but in 30-60 sec this crashed... and sure we have not one customers with MLP... i hope we have around 20-30... so should be tonns MLP :)
Sure i lose few hours for find solutions but without luck. Nobody have exacly answer to this question.
I got abolutely working configuration from working NAS (7201 and 7204) and move it to ASR... thats what i have with MLP :((((
Can someone try help me investigate in figure our this....
I found same thread on ciscoforums where guys tell "need update ios" but someone update it and have same issue, so i hope issue not in IOS version.
Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSAL-M), Version 15.3(2)S1, RELEASE SOFTWARE (fc1)
IOS XE Version: 03.09.01.S
System image file is "bootflash:/asr1002x-universal.03.09.01.S.153-2.S1.SPA.bin"
If you need anything else, like more debug or more info ... just ask me... i will wait there for your questions.
Thanks a lot.!
/// Update
Little bit more debug from bootflash:/tracelogs/cpp_cp_F0-0.log.7749.20150213111013
02/13 11:09:07.734 [errmsg]: (ERR): %CPPOSLIB-3-ERROR_NOTIFY: cpp_cp encountered an error -Traceback= 1#adfdffd320bd4b50a075756a85bafaca errmsg:7FB80973B000+121D cpp_common_os:7FB80C74C000+D8D5 cpp_common_os:7FB80C74C000+D7D4 cpp_common_os:7FB80C74C000+19A3E cpp_ifm:7FB81F747000+A158 cpp_mlppp_svr_lib:7FB815BBB000+C2F1 cpp_mlppp_svr_lib:7FB815BBB000+1CCA8 cpp_mlppp_svr_smc_lib:7FB815DF9000+2D28 cpp_common_os:7FB80C74C000+11E6E cpp_common_os:7FB80C74C000+118AA cpp_common_os:7FB80C74C000+116EB evlib:7FB80B72C000+B8E7 evlib:7FB80B72C000+E1B0
02/13 11:09:07.735 [buginf]: (debug):
-Traceback=1#adfdffd320bd4b50a075756a85bafaca cpp_common_os:7FB80C74C000+11445 cpp_common_os:7FB80C74C000+D7D9 cpp_common_os:7FB80C74C000+19A3E cpp_ifm:7FB81F747000+A158 cpp_mlppp_svr_lib:7FB815BBB000+C2F1 cpp_mlppp_svr_lib:7FB815BBB000+1CCA8 cpp_mlppp_svr_smc_lib:7FB815DF9000+2D28 cpp_common_os:7FB80C74C000+11E6E cpp_common_os:7FB80C74C000+118AA cpp_common_os:7FB80C74C000+116EB evlib:7FB80B72C000+B8E7 evlib:7FB80B72C000+E1B0 cpp_common_os:7FB80C74C000+13B43 :400000+6061 c:7FB7FC394000+1E514 :400000+5CC9
02/13 11:09:07.735 [cpp-mlppp]: (warn): [cpp_mlp_tx_link_create:3260] cpp_ifm_tx_chan_create_on_if failed link=1563 (retval='CPP Interface Database' detected the 'warning' condition 'IFDB detected error in API': No such file or directory)
02/13 11:09:07.735 [cpp-mlppp]: (warn): [cpp_mlp_svr_bundle_add_link_cmn:5035] cpp_mlp_tx_link_create failed link=1563 (retval='CPP Interface Database' detected the 'warning' condition 'IFDB detected error in API': No such file or directory)
02/13 11:09:41.978 [cpp-ifm]: (ERR): cpp_ifm_tx_chan_create_on_if.806: failed to find channel for parent if_h 100-'CPP Interface Database' detected the 'warning' condition 'IFDB detected error in API': No such file or directory
02/13 11:09:41.980 [errmsg]: (ERR): %CPPOSLIB-3-ERROR_NOTIFY: cpp_cp encountered an error -Traceback= 1#adfdffd320bd4b50a075756a85bafaca errmsg:7FB80973B000+121D cpp_common_os:7FB80C74C000+D8D5 cpp_common_os:7FB80C74C000+D7D4 cpp_common_os:7FB80C74C000+19A3E cpp_ifm:7FB81F747000+A158 cpp_mlppp_svr_lib:7FB815BBB000+C2F1 cpp_mlppp_svr_lib:7FB815BBB000+1CCA8 cpp_mlppp_svr_smc_lib:7FB815DF9000+2D28 cpp_common_os:7FB80C74C000+11E6E cpp_common_os:7FB80C74C000+118AA cpp_common_os:7FB80C74C000+116EB evlib:7FB80B72C000+B8E7 evlib:7FB80B72C000+E1B0
02/13 11:09:41.981 [buginf]: (debug):
-Traceback=1#adfdffd320bd4b50a075756a85bafaca cpp_common_os:7FB80C74C000+11445 cpp_common_os:7FB80C74C000+D7D9 cpp_common_os:7FB80C74C000+19A3E cpp_ifm:7FB81F747000+A158 cpp_mlppp_svr_lib:7FB815BBB000+C2F1 cpp_mlppp_svr_lib:7FB815BBB000+1CCA8 cpp_mlppp_svr_smc_lib:7FB815DF9000+2D28 cpp_common_os:7FB80C74C000+11E6E cpp_common_os:7FB80C74C000+118AA cpp_common_os:7FB80C74C000+116EB evlib:7FB80B72C000+B8E7 evlib:7FB80B72C000+E1B0 cpp_common_os:7FB80C74C000+13B43 :400000+6061 c:7FB7FC394000+1E514 :400000+5CC9
02/13 11:09:41.981 [cpp-mlppp]: (warn): [cpp_mlp_tx_link_create:3260] cpp_ifm_tx_chan_create_on_if failed link=1563 (retval='CPP Interface Database' detected the 'warning' condition 'IFDB detected error in API': No such file or directory)
02/13 11:09:41.981 [cpp-mlppp]: (warn): [cpp_mlp_svr_bundle_add_link_cmn:5035] cpp_mlp_tx_link_create failed link=1563 (retval='CPP Interface Database' detected the 'warning' condition 'IFDB detected error in API': No such file or directory)
02/13 11:10:13.049 [cpp-ifm]: (ERR): cpp_ifm_tx_chan_create_on_if.806: failed to find channel for parent if_h 100-'CPP Interface Database' detected the 'warning' condition 'IFDB detected error in API': No such file or directoryOriginally Posted by CRAIGDWILSON
Look in your logs for any issues zmd-messages.log regarding accessing
"AppData". If so, that could be a known issue they are looking at,
though it is not really new but there are reports back to even 11.2.x
The reports are more of a timing issue on boot, but perhaps it could
relate to logon if that happened soon enough, though non of the reports
are for logon events.
On 6/25/2014 2:26 AM, thsundel wrote:
>
> Hi!
> Anyone else have problems with bundles not installing/launching on
> schedule with 11.3FRU1 agent? Also bundles set to launch at user login
> doesn't work first time the user logs in after workstation is booted, if
> they logout and in again then it will work?
>
> Thomas
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Technical Support Engineer
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
Nope, nothing refering to appdata (only thing it finds is appdatalrucache but that is probably not what you are asking for)...
I've now tried assiging the bundle both to device and to user but still nothing happes, works fine on our 11.2.x agent workstations.
Thomas -
Hello,
I have an pool of physical servers at the company that supports the production environment of virtual servers.
This pool have 4 (0, 1, 2 and 3) domain servers.
I recently had a problem with the OVS-AGENT, and had to restart the whole pool.
After that, all virtual servers I start at the pool, using the VM Manager, always start at the same domain server, the domain number 3.
When I force the start using xm create, I can start the virtual server at domain server 0, 1 and 2 too.
The live migration only works with the shell command (xm migrate -l), using the VM Manager simple do nothing.
I try to force an especific virtual machine to run at an especific node, using Placement Policy at VM Manager, but when I try to start the server, this error occurs:
Start - /OVS/running_pool/441_n_psgl04
PowerOn Failed : Result - failed:errcode=20000, errmsg=No enough memory to run vm(/OVS/running_pool/441_n_psgl04), required memory=16384.
StackTrace:
File "/opt/ovs-agent-2.3/OVSSiteVM.py", line 124, in start_vm
raise e
Any idea what's happening? Is that some problem with the ovs-agent's database? How can I fix that with minimum of outage of the virtual servers?
I'm really concerned about this problem because this weekend we had a stop on the network that caused the restart of the cluster, and when the servers came back, all virtual servers started up on the same physical server, which caused a lack of resources.
Thanks for your help, and sorry about my poor english!843474 wrote:
PowerOn Failed : Result - failed:errcode=20000, errmsg=No enough memory to run vm(/OVS/running_pool/441_n_psgl04), required memory=16384.You don't have enough memory on the target server to start this guest. So, you need to work out why you don't have enough memory or why Oracle VM Manager isn't seeing all your servers. Check to see if all the servers are listed as "Active" on the servers tab of Oracle VM Manager. Also, you can try and restore the ovs-agent database to the entire pool by clicking the "Restore" button on the Server Pools tab. -
Problems with mapping after bundling messages into one XML-file
Hi all,
Case 1: one DebMas IDoc ==> XI ==> one XML-file : no problems with mapping.
Case 2: several DebMas IDoc's ==> XI ==> one XML-file : problems with mapping.
Explanation:
Incoming DebMas IDoc's:
Businesspartner 1 : no Customer Master Partner Functions (E1KNVPM).
Businesspartner 2 : Customer Master Partner Functions (E1KNVPM).
Businesspartner 3 : Customer Master Partner Functions (E1KNVPM).
Businesspartner 4 : Customer Master Partner Functions (E1KNVPM).
After bundling into one XML-file:
Businesspartner 1 : no Customer Master Partner Functions (E1KNVPM).
Businesspartner 2 : no Customer Master Partner Functions (E1KNVPM) !!!!
Businesspartner 3 : Customer Master Partner Functions of Bp 2 (E1KNVPM) !!!!.
Businesspartner 4 : Customer Master Partner Functions of Bp 3 (E1KNVPM) !!!!.
All the payloads of the IDoc's are correct.
In the message mapping we use a Container for the Partner Functions (shown as below)
Is this a serious bug in the mapping of SAP XI ?
Does anyone knows how to solve this serious problem.
E1KNVVM -
> Partner_Container
E1KNVPM -
> Partner
PARVW -
> ParnerRole
KUNN2 -
> PartnerNumber
Regards,
Theo PijlmanHi,
Example:
Input idoc has field F1 with occurence 0..unbnd
My input values for field F1 is
1
none
2
3
Say, I have a mapping, F1---->TargetF1
In the target only 3 TargetF1s will be created for the values 1,2,3 and nothing will be created for the field F1 with no value.
To overcome this, use collapse contexts.
F1->collapsecontexts>TargetF1
This way, the TargetF1 fields created will have the following values:
1
blank
2
3
Collapse contexts makes sure that a target is created, even if there is a context change specified at the source.
Hope this is clear.
Regards,
Smitha. -
When installed JDK but I have problem with System vars may install bundle
When installed JDK but I have problem with System vars may install bundle [netbeans&JDK] WITHOUT UNISTALLING initial JDK or needed uninstall first ?
With the word 'automatically', yes you do need pulseaudio. I'm sure you could cook up some udev or related rule to do that in Alsa, but pulseaudio would be easier.
-
Problem with the agent console created in the ESSO-Logon Manager 64 bits
Friends,
When I use the installer that I created in the console ESSO-Logon Manager for 32-bit, this I install it on the client side and when I synchronize with the console-Logon Manager ESSO brings me and I can see the agent all the templates I configured.
I have a problem with the agent console created in the Logon Manager ESSO-64bit.
When I use this installer on the client stations and then by the agent does not envision the applications that I have configured in the console.
This causes you can not do single sign on to applications that I have configured in the client stations
To generate this installer use the source name: ESSO-LMx64.msi
Can someone please help me with this problem, this only happens when I use the msi installer on 64-bit client stations.
Thanks.Jackson_Bill wrote:
What IDE are you using and what platform?Read first.
Moh Bob wrote:
I'm using J2ME platform SDK 3.0
db -
How to complain to Apple about this company and how to get a formally answer for problem with Apple agent in Kuwait??
You did not buy your iphone from an Apple store. No Apple employee sold you anything.
Your complaint is not with Apple. You bought from an unauthorized seller. Your complain is with that seller.
As you have been told more than once, Apple has nothing to do with this. -
Problem with Obi for Excel and Agents - Obiee 11.1.1.6.6
Hello,
When I export query to Excel from a dashboard OBI, the file size is only *350 KB* but when I use agent for same query and send an email, the excel file size is *6 MB*, so there is a great diference in size and I have a problem because I have restriction for sending emails regarding to file size.
Do you Know why increase a lot file size when I use aaan gent ?
I have another question:
When I use pluggin obi for excel, I am lossing information content when I use pluggin obi for excel.
Do you know if I must to change configuration in instanceconfig.xml ? or is there another reason ?
Regards,
MBPThanks Benoit,
I changed the parameter jus like you suggested to me and it works very well, but I have another problem with agent and it is regarding to file size.
When I export query to Excel from a dashboard OBI, the file size is only *350 KB* but when I use agent for same query and send an email, the excel file size is *6 MB*, so there is a great differenrence in size and I have a problem because I have restriction for sending emails regarding to file size.
Do you Know why increase a lot file size when I use agent ?
I have another question:
When I use pluggin obi for excel, I have the same problem than I expused here at beggining with agent, I am lossing information content when I use pluggin obi for excel.
Do you know if I must to change configuration in instanceconfig.xml ? or is there another reason ?
Regards,
MBP
Maybe you are looking for
-
Multi Resource Scheduling MRS - How to exclude certain Maint Activity Types
is there a way to exclude orders that have a specific maintenance activity type. We have standing work orders that in reality we should not have appear on the planning board. Well, we really shouldn't have any standing orders but we do. Has anyone
-
Missing characteristics value in table AUSP
Hi all, In the classification of equipment master, the characteristics value of a new class could be shown but the value cannot be found in the table AUSP. (it's been ensured that the object no. input is correct) Where is the value stored? or is ther
-
Need Help converting objects in a TreeMap to String
This app counts the number of times a word occurs in a document. I used a HashMap to store the key and value. The I sorted them using TreeMap. Now I need to return the key (String) and value (Integer Object) so they may be print like this -- 'key: va
-
when i try to go on a website all it says is safari can't find the page. Any help? if you had this problem can you tell me how to fixs the problem
-
hi my iphone is only showing cunnect to itunes and not working. tryed to restore even its not working showing error 21 please help thank