"Bundle Status" and "Acknowledge All Messages" = Problems

Server: ZCM10.3.4 (was and before). sles10_64
- From the SLED11 (FF) open server
https://zcmserver
- go to the
/Bundles/MyBundles/
- This folder i see list bundles with columns:
"Status" "Name" "Type" "Category" "Enabled" "Version"
- For Bundle "Copy of Create_D_INSTALLZCM" i see:
"Bundle Status" != Normal
- Ok.. Open this Bundle and see:
"Number of errors not acknowledged:" = 3
and in the "Message Log" (after press REFRESH) i see this error messages...
This is OK.
- At the LEFT ("Bundle Tasks") i see Button: "Acknowledge All Messages".
- Press to this "Acknowledge All Messages"
After this:
"Number of errors not acknowledged:" = 0 and this is OK.
- Back to the "/Bundles/MyBundles/" and i see AGAIN:
"Bundle Status" != Normal
Logout | Login. Reboot ZCM server... do not resolver this problem... again and again:
"Bundle Status" != Normal
If not to press the button "Acknowledge All Messages" And to open each message, in each message to mark
"Acknowledge" and "Delete" and after that to press "Next Message" - All will BE OK(Without an error which has described above).
Why button "Acknowledge All Messages" works incorrectly?
How to correct?
Serg

Skoltogyan,
> Logout | Login. Reboot ZCM server... do not resolver this problem...
> again and again:
> "Bundle Status" != Normal
>
> If not to press the button "Acknowledge All Messages" And to open each
> message, in each message to mark
> "Acknowledge" and "Delete" and after that to press "Next Message" - All
> will BE OK(Without an error which has described above).
>
> Why button "Acknowledge All Messages" works incorrectly?
> How to correct?
You have two issues here. See:
http://www.novell.com/documentation/...a/bay7wv7.html
Acknowledge is not the same as "Delete"
The other is that the "status" you see on the Bundle is not always updated correctly.
- Anders Gustafsson (NKP)
The Aaland Islands (N60 E20)
Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms

Similar Messages

Can't connect to itunes with iphone and followed all toubleshooting problems!!

can't connect to itunes with iphone and followed all toubleshooting problems!!

Try taking a look at this Apple doc -> iOS: Unknown error containing '0xE' when connecting to a Windows PC
It should be able to help with that error.

Documents remain in GenWWW status and conversion error message says success

Hi,
I have instaled UCM 11.1.1.4 and the situation is that documents remains in GenWWW status, the
conversion error message says success . In Ibr logs says everything went perfect, in UCM logs isn't recorded any error.
Anyone have a clue to solve this problem?
Update:
When runnig IdcAnalyse appears the following error:
./IdcAnalyze -filesystem
FileSystemFileStore:1.0.0.0 started.
Content Management System Server. Version 11gR1-11.1.1.4.0-idcprod1-101229T001824
Copyright (C) 1996-2011, Oracle and/or its affiliates. All rights reserved.
Analyzing filesystem...
.....................Error checking filesystem: Unable to locate extension for rendition flag 'L'.
Is this error related with the documents remain in GenWWW?
Thanks
Edited by: carlos.pereira on Jul 26, 2011 4:58 PM
Edited by: carlos.pereira on Jul 26, 2011 5:00 PM

Usually this issue is seen when the IBR's cannot keep up with the load and after a defined amount of time, the refineryjobs entries are cleared while the IBR's might still hold this content item.
If you do what Srinath proposes the refinery jobs is cleared as well as the queues on the IBR. This will not fix the issue with the documents in GenWWW, but it will make the way clear for (new) documents to be (Re-)submitted for conversion. IdcAnalyze should then be able to create a IdcCommand file with resubmit_for_conversion calls for all the documents in GenWWW state. Running this IdcCommand file should then convert all the documents that were "stuck" in GenWWW.

How do I save and display all messages in non primary email address

I have 2 email accounts on Thunderbird. The emails to the secondary account are not saved. I can open and read new messages but if I want to view them later, they are gone. My primary email retains all messages. Can I configure Thunderbird so I can retain all messages on more than one email account? If so, How?

There are several possible reasons that messages seem to 'disappear'.
There are two types of email accounts: IMAP and POP. See https://support.mozilla.org/en-US/kb/glossary-terms-including-types-accounts
If you have a POP account and are accessing the mail on more than one computer or smartphone, whichever device reads (downloads) the message first will have it locally, but it will no longer be listed or available on the other devices.
If you have an IMAP account, the message stays on the server, but if one device (user) moves or deletes the message, it will affect the view on all devices. So, for example, if you are using your smartphone and take some action on an email, when you get back to your computer, it will reflect that same action (but you might not have realized what caused it).
Another, less likely, reason for messages not to show up in your inbox is having the preference set to show only unread or recent messages. Then once you read them they seem to disappear.
If you are still having problems, please look at the following items and respond with the information.
1) What operating system do you use (Win8, MAC, Linux, etc)?
2) Are you using IMAP or POP?
3) If your mail server has a browser interface (web mail access such as mail.google.com), do the messages show up there?
4) Right click on the folder in question and select Properties.
a) Number of messages?
b) Size on disk?
5) Left click on the account name; View settings for this account; highlight Server settings;
What choices are marked under "When I delete a message"?
6) What, if any, antivirus program do you have installed?

How can I trash and delete all messages at once in my Mail account?

I would like to be able to do the equivalent of a 'select all" and move all the messages in my Mail account into the trash, rather than having to move them one by one. Is it possible to do that?

Sorry, but it's not possible to select all in the mail app to delete all messages at once. One at a time is the way that you have to go.

How do I flag and DELETE all messages in my IN basket -- Seems that if I delete them one by one they still indicate being there even if there are NO messages

When I retrieve mail and delete the message I still see the message count even if all of the messages are gone

I had tried that and it appeared to select nothing, so I got thrown off. But yes, I should have tried the delete button at that point. Then delete the swatch, then copy it all and paste it into a new file. The paste-in is my primitive way of confirming what's actually there. I'm sure there are more elegant ways.
Thanks, guys.

TS3992 Iphone 4s won't back up because not enough storage after deselected and deleted all messages.

I read and followed the step from Apple website. Also went and deleted all my message which is about 1.9gb. I also un selected all the option from the backup menu. How come i still couldn't back up my phone. iCloud keep giving back error messages. Also time to time all the contacts diappeared for couple of hours then just reappeared out of no where. Please help.

After trying every possiblity I called Apple Support, spoke with Tyler who dug as deep as he could and it showed almost 5 gigs available. He contacted a tech for the server who said that they could see that I had deleted all of the files but that due to the high amount of server traffic at this time it may take a week to initialize on the server before it shows cleared.
Thank you randers4 for your help.
Greg

I updated 7.1.1 then my sms , wifi , pics,apps and data all get problems

i have just updateed 7.1.1 then my phone become suck.
msm canot send imess or text.
wifi is slowly , pics is lost , app i bought is gone,
it is hard to macke a phone call and all other things working slowly.
i tried restar but all still same.

Basic troubleshooting steps outlined in the User Guide are restart, reset, restore from backup, restore as new device.
Have you been through ALL FOUR troubleshooting steps? If so, and you still have problems, you'll need to bring your phone into Apple for evaluation as you likely have a hardware issue.

Iphone and droid group message problem

I recently got the iphone 6. I have a group text comprised of iphone and non iphone users. If the discussion is just between the non iphone users the messages send properly (as a sms). However, when an iphone user responds it automatically converts to iMessage and non iphone users stop receiving the group txt. HELP!?!?!

I had an iphone 5 and switched to Samsung galaxy S5 in August 2014. Went through all the processes of de-registering number with apple imessage and had no problems with getting group messages from iPhone users. Then, about beginning of January, no longer could receive group messages from my iPhone friends. A couple have upgraded to the 6 but others had not. I have a pending case with ATT support, worked with Samsung support and did a factory reset, still no fix. I had two of my friends turn off iMessage today and send the group text, guess what? IT WORKED. So I totally agree, something has happened, maybe with a recent iOS update, not sure. But, they cannot send me group texts with iMessage turned on. Need help because I cannot afford to switch back to iPhone just so I can group text, but I'm getting left out of important information and events. VERY FRUSTRATED!!!!!!

NPS and Accounting-Response messages problem

Hi,
We have a number of Proxim AP8000 access points, doing wireless authentication using NPS. Now we are facing an interesting problem.
The access points are sending Accounting-Request messages using an arbitrary UDP source port, but they do expect receiving the Accounting-Response message on port 1813. NPS on the other hand is sending the response back on to the same port as the request
originated, which access point is not listening on at all.
I need to somehow instruct NPS to change its behavior and always send the radius accounting related messaged to port 1813. I wonder if such a thing is possible.

Hi,
There may be some misunderstanding of RADIUS.
Remote Authentication Dial-In User Service (RADIUS) is an industry standard protocol described in RFC 2865, "Remote Authentication Dial-in User Service (RADIUS)," and RFC 2866, "RADIUS Accounting."
RADIUS messages are sent as User Datagram Protocol (UDP) messages. UDP port 1812 is used for RADIUS authentication messages and UDP port 1813 is used for RADIUS accounting messages. Some network access servers might use UDP port 1645 for
RADIUS authentication messages and UDP port 1646 for RADIUS accounting messages. By default, NPS supports receiving RADIUS messages
destined to both sets of UDP ports.
Exactly one RADIUS packet is encapsulated in the UDP Data field, where the
UDP Destination Port field indicates 1812 (decimal). When a reply is generated, the source and destination ports are
reversed.
Therefore, the source port of the request message is set by RADIUS client(your APs). Most RADIUS clients use a randomly selected source port number.
Besides, UDP is stateless. So there isn’t a “listening” state of it.
According to your description, your RADIUS works right in the way as it is designed.
For detailed information, please refer to the link below,
Remote Authentication Dial In User Service (RADIUS)(RFC2865)
http://tools.ietf.org/html/rfc2865
Remote Authentication Dial In User Service (RADIUS)(RFC2138)
http://tools.ietf.org/html/rfc2138
Hope this helps.
Steven Lee
TechNet Community Support

6230i sending and receiving txt message problems.

I am hoping someone can help me solve this ongoing problem that i have had for over 2yrs now and i keep gettin fobbed off by o2. Ok i have a nokia 6230i and when i send txts to a particular number and them to me i am not getting them nor are they getting mine. Some days the txts work fine but its rare,I can send say a txt at 2pm and they get it,if i send one at 3pm they may not and this can go on for days and then it will work again for a little while.
Its a very frustrating problem as i am on contract and these txs are getting wasted as the person is not receiving them even though it says they are sent. I hope someone can shed some light on this problem for me,i would greatly appreciate it.

You problem is quite strange and difficult to isolate between the phone or network.
Do you always get the "message sent" message, even when the txt is not received by the recipient? Have you tried txts with your sim card in another o2 phone?

I moved My Music from C drive to E drive and then all my problems started

My C drive was very full, so I moved My Music to E drive which had lots of spare capacity.
Unfortunately after the move itunes opened but my library was empty. I discovered from the itunes help that I should not move the library file. I reversed the move by moving back My Music to C drive and recovered my library by following the instructions in this link http://docs.info.apple.com/article.html?artnum=93732.
My library is now back in itunes, but when I connect my iPod itunes freezes (and in windows task manager 'itunes is not responding') and my iPod says do not disconnect.
I am now stuck.
All I wanted to do was move ‘my music’ to a part of my hard drive with space, I have failed to do that and have now I have no iPod connection and a malfunctioning itunes. Can anyone help me out of this mess please?
dell Windows XP

Here are typical layouts for the iTunes folders:
Ideally your library would be in the layout on the right and stored either at <User's Music>\iTunes or the top level of a different drive, e.g. D:\iTunes, with all content inside the iTunes Media folder.
iTunes usually doesn't cope well if you move files around by hand so getting from where you are now to where you want to be might take a few steps. How easy it is also depends on whether you can afford to let iTunes copy every song you have into the correct location before deleting the originals. If not I can offer a script that can move files around instead of copying them. The first thing to establish is the current locations of your library files and your media folder. The script iTunesInfo can help reveal this if you're not sure.
I have a post on making a split library portable that describes how to restructure your library. If you let me know what things are where I can suggest a set of steps that will get your library set up right.
tt2

Group text crash and deleted all messages!

I've been using group text for a while and it had been great then it crashed.
It deleted every message I've ever sent or rec!!

Ok, yes. Like I had said a couple minutes ago, I think this is beyond my expertise. I recommend you call Apple next.
Their number for support is on this page: http://support.apple.com/kb/he57
I apologize I was unable to help resolve your issue. Good luck though.

Logic and BFD (all out) problem...I know, I know, but this one's a bit diff

OK, I'm new to Logic. But I pretty much get it. I totally understand how the Logic Environment should be interfacing with BFD (all out), using audio objects (Aux) for the coresponding outs from BFD. Here's the thing...
When I try to select the input options for the Aux object from BFD all I get is "BFD (all out) 3-4" and no other options from BFD. Am I missing anything or is my BFD just being a jerk? Also, after updating and re-installing BFD and Logic the AU manager still won't pass BFD. Any thoughts? Thanks.
Dual 2.0 G5 Mac OS X (10.4.5) 1GB Ram

I thought this is what it's supposed to do. Send
channels 1-2 to the track, and the rest to the aux
objects (which would start w/ 3-4).
Yes, I understand this, however all subsequent tracks (not just the next sequential tracks) pull up as 3-4. No further outputs are given once 3-4 has been selected once. They all come up with 3-4 if stereo or 3 or 4 if mono. Nothing else. That's why I now suspect it's an issue for FXpansion to solve.
This isn't do or die for me. It's definitely more convenient that soloing each output in BFD one at a time and recording it to an audio track, but I can do that in the meantime. Thanks all for your input!

Fix your iphone sound issue once and for all.

I spent the last 12 hours reading through sound fix's for iphones of all different numbers colors and types. everything from random button presses to blowing into headphone jacks to downloading a gangam style app. im here to tell you none of that crap works. blowing into the headphone jack "appears" to work temporaarily but its not a fix. heres what i did and it worked. i spent an hour messing with everything i could find. i could get the sound to come on but only VERY briefly. like seconds at a time. no volume bars nothing. but ringtones worked fine. i took a small screwdriver and gently pushed the docking connector upwards after reading it could be a docking issue. and whaddya know... works perfectly. not one issue now. now this could have fixed it for one of 2 reasons i can think of. either A the docking connector was in fact dirty and i got some crap off it when i moved it up. or B the pins were somehow not sitting right and by pushing it upward i reset them. i searched HOURS just to fix it myself. and im posting this in the hopes it helps some of you so you dont have to go through the crap i just went through. give it a shot just dont push too hard and snap yer connector. "btw might take a few trys of pushing it upward in different spots. i did it evenly across it a couple times and fixed all my problems."

I've got an idea! give some of that money to me! I'll
use it for college tuition and other expenses when I
go later on this year (either OSU of UofM). Those
'other expenses' may or may not include a MBP!
But indeed there is a lot of room for a "MAY" include MBP...
What's college without a mac?

"Bundle Status" and "Acknowledge All Messages" = Problems

Similar Messages

Maybe you are looking for