Bundle Status

Hi
Now that I'm all updated and running OK and ZDC is happy, I would like to chase up stuff that is not working.
In the early days my Bundle Status showed figures that were glossed over with the attitude of "got bigger fish to fry".
Now on new published bundles, I'm not getting anything at all. The older bundles still have figures still there but I don't think they have changed. The DB sort of stuck and not recording anything.
Any ideas where to look?
Cheers

GERWIL,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Similar Messages

"Bundle Status" and "Acknowledge All Messages" = Problems

Server: ZCM10.3.4 (was and before). sles10_64
- From the SLED11 (FF) open server
https://zcmserver
- go to the
/Bundles/MyBundles/
- This folder i see list bundles with columns:
"Status" "Name" "Type" "Category" "Enabled" "Version"
- For Bundle "Copy of Create_D_INSTALLZCM" i see:
"Bundle Status" != Normal
- Ok.. Open this Bundle and see:
"Number of errors not acknowledged:" = 3
and in the "Message Log" (after press REFRESH) i see this error messages...
This is OK.
- At the LEFT ("Bundle Tasks") i see Button: "Acknowledge All Messages".
- Press to this "Acknowledge All Messages"
After this:
"Number of errors not acknowledged:" = 0 and this is OK.
- Back to the "/Bundles/MyBundles/" and i see AGAIN:
"Bundle Status" != Normal
Logout | Login. Reboot ZCM server... do not resolver this problem... again and again:
"Bundle Status" != Normal
If not to press the button "Acknowledge All Messages" And to open each message, in each message to mark
"Acknowledge" and "Delete" and after that to press "Next Message" - All will BE OK(Without an error which has described above).
Why button "Acknowledge All Messages" works incorrectly?
How to correct?
Serg

Skoltogyan,
> Logout | Login. Reboot ZCM server... do not resolver this problem...
> again and again:
> "Bundle Status" != Normal
>
> If not to press the button "Acknowledge All Messages" And to open each
> message, in each message to mark
> "Acknowledge" and "Delete" and after that to press "Next Message" - All
> will BE OK(Without an error which has described above).
>
> Why button "Acknowledge All Messages" works incorrectly?
> How to correct?
You have two issues here. See:
http://www.novell.com/documentation/...a/bay7wv7.html
Acknowledge is not the same as "Delete"
The other is that the "status" you see on the Bundle is not always updated correctly.
- Anders Gustafsson (NKP)
The Aaland Islands (N60 E20)
Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms

Retired devices and bundle status

Hi all!
I might missunderstad the documentation, but as I read it a device that is retired should loose it's bundle and policy association. According to documentation "As a result, all inventory information is retained and is assessable but all policy and bundle assignments are removed".
When I check the bundle status many of my retired devices is listed under pending, event with bundles created after the device got retired.
Any suggestions?
Best regards
Lennart Johansson

lelle,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

MSI will not install; Bundle status is "Downloaded"

Have been receiving numerous "Error impersonating configured user." messages.
I changed the bundle to "Run as secure system user (don't allow system to interact with desktop)" and changed the "Install MSI" action's "Install Parameters:" to from /i to /im. ("Install MSI" is the only action.)
I then incremented the version number. "Install Options" are set to "Install always".
The bundle status in the ZENworks Adaptive Agent is shown as "Downloaded" and the .MSI does not run.
The clients PC's use Windows 7.

Murrutia,
> Before incrementing the version number, can you tell me what the
> expected result would be in the there are devices that already have had
> a successful installation of the bundle? Will the Zenwork agent "ignore"
> the install or will a re-install be attempted?
A reinstall will be attempted if the verstion number is changed:
(http://www.novell.com/documentation/...tware_distribu
tion/?page=/documentation/zenworks11/zen11_cm_software_distribution/data/b
z87zho.html)
"D.1 Triggers that Cause an Install Action Set to Run
If you assign a bundle to a device or user, the Install action set runs on
the device only in the following circumstances:
If the Install action set has never run on the device.
If the version of the Install action set is different from the version of
the Install action set that has previously run on the device
The Install action set of a bundle is internally associated with a global
version identifier and the Install action set of every bundle version is
internally associated with a local version identifier.
If you make any modifications to a bundle other than modifying its Install
action set, the Install action set of the sandbox that is created has the
same local version identifier as the bundle version you modified. However,
if you modify the Install action set of a bundle, the global version
identifier of the bundles Install action set is incremented by one and
the modified Install action sets local version identifier is set to the
new value of the global version identifier.
If the install action set or its options are modified and the bundle is
re-published, then when the bundle is installed or launched, the install
action set is invoked again, even if it has been set to install only
once."
Anders Gustafsson (NKP)
The Aaland Islands (N60 E20)
Have an idea for a product enhancement? Please visit:
http://www.novell.com/rms

Logging event trunk-status vs link-status vs bundle-status

Hi
This is not really a query regarding the above interface level commands, but just looking for someone elses view on the differences regardless of however subtle they are.
No links please, like I said I know what they are and do.
Just your real life expereinces why you needed bundle-status for instance will do just fine.
thanks in advance

Three different use cases for status notifications.
I'll give you my experience with using these commands and where they are useful.
Logging event trunk-status--this command is particularly useful for tracking security vulnerabilities as well as trunk mismatches when you're relying on DTP for trunk negotiation.
Say you have a trunk uplink on a switch that links to a distribution switch. This trunk carries traffic for multiple VLANs (thus the very definition of a trunk).
Lets say the other side of the link on the distribution switch is for some reason changed from a trunking state (switchport mode trunk, or switchport mode dynamic desirable/auto) to a non-trunking state (switchport mode access). If the uplink on your access layer switch is not hard-coded for trunk-mode (switchport mode trunk and/or switchport nonegotiate), then your uplink interface can potentially be changed from a trunk port to an access port and only carry traffic for a single VLAN. This would leave other clients on the access switch VLANs stranded from the rest of the network. This logging mechanism would let you know that the switchport is no longer an operational trunk, even though the link status would still be up.
Of course, as a best practice, you should never rely on DTP to form trunk links, especially on uplinks.
The second use is for security--if you have an interface that you KNOW should never become a trunk interface (i.e. an access port where clients connect), and for whatever reason the interface becomes a trunk link (due to a compromised switch or an over-reliance on DTP), you could potentially expose VLANs that users should never have access to. This logging mechanism would let you know if that happens.
Logging event link-status--this one is simple--it logs whether the interface is up/down or changes. One thing I find this useful for is on particularly important interfaces--uplink interfaces, routing adjacency interfaces, server interfaces, etc. Use this on any port when you want to absolutely know if it goes down.
Logging event bundle-status--this one is fairly simple as well--it logs whether there is a change in the port-channel. This could be triggered by a member interface leaving or joining. One reason you would want to use this is for guaranteed bandwidth and configuration consistency.
Sometimes port-channel members leave a channel-group because the configuration is changed on one member and not on the other, likely by mistake. This could catch an error like that and cue you on where to look into the issue. As for bandwidth, obviously you don't want to believe you have 20Gbps or 2Gbps on your uplink, then find out that you actually have half (or whatever portion) of that bandwidth missing because a member has left the port-channel. Both situations can be avoided by monitoring the status of your bundle (or port-channel).

Bundle Status Issues

Hello,
Several of our bundles are reporting their effective statuses incorrectly. For example, one bundle that makes a bunch of registry changes has been installed successfully on every device I've checked, yet it only reports as being effective on 34 devices, with 253 pending. This is definitely incorrect. Any ideas? How does Zenworks determine if all a bundles actions (ie. registry edits) have been completed successfully?

hi
i have this status issue also. i have 22 device succeeded, but when i click on it, it list's me no device.
i really need this function, to control where it has installed and where not.
i have ZCM 10.3.3. on SLES 10.
have the debug activated, look at the zmd-messages.log but really dont know for what to search !!!!
i opened a ticket, but they dont have a really fast solution....(no solution till yet).
Sascha
>>> Anders Gustafsson<[email protected]> 22.11.2010 09:50 >>>
Chewmanfoo,
> Thanks. 10.3.1 and I'll check the logs.
>
Note that you will need debug logging to see anything useful.
Check zmd-messages, but make sure a zac emp wakeup
is done first. See:
http://www.novell.com/support/viewCo...rnalId=3418069
- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)
Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms

Patch Bundles failing on Install

Looking at Patch Bundle status: Bundles-->ZPM-->2015 January Critical - CCC-->Bundle Status-->(Device assignments-Devices Succeeded). Most workstations show Partial Complete. When looking at the details of the deployment under install, this is the error I am receiving: There is no user session available or user session cannot be determined. I am running 11.3.2 on the server side, but the workstations are at 11.3.0 currently.

Originally Posted by lressel
Looking at Patch Bundle status: Bundles-->ZPM-->2015 January Critical - CCC-->Bundle Status-->(Device assignments-Devices Succeeded). Most workstations show Partial Complete. When looking at the details of the deployment under install, this is the error I am receiving: There is no user session available or user session cannot be determined. I am running 11.3.2 on the server side, but the workstations are at 11.3.0 currently.
This was a known issue on 11.3.0.......
Patch Bundles would not install properly if a user was not logged onto the device.
If you upgrade the devices to 11.3.2, the issue should go away.

Bundles unavailable on satelite server

Dear,
We have 2 primary server and 8 satelites. I have create a new bundle containing groupwise 8. The bundles is included to every satelite! But is not replicated to 2 satelites.
Bundle status on those 2 satelites "unavailable"
What i aldready did configuration - management zone - content - satelite replication and include that satelite server. I thought that this would force replication.. But not...
Can somebody help me?
Joeri

Code:
com/novell/zenworks/agent/core/zmd/refreshmgr/endRefreshEventTopic handler(s): 0.006 seconds] [] []
[Debug] [04/26/2011 09:16:10.349] [] [2060] [ZenworksAgent] [71] [RefreshMgr] [set up ref timers] [] []
[Debug] [04/26/2011 09:16:10.349] [] [2060] [ZenworksAgent] [71] [ConfigManager] [Retrieving Config Handlers] [] []
[Debug] [04/26/2011 09:16:10.353] [] [2060] [ZenworksAgent] [71] [ZenCache] [(Thread 71) PutObject(RandomRefreshCachePopulated, UserContext{{_LocalId=26cd1a9bc87649d288b5adb22cb99449; _RemoteId=26cd1a9bc87649d288b5adb22cb99449}}) called] [] []
[Debug] [04/26/2011 09:16:10.353] [] [2060] [ZenworksAgent] [71] [ZenCache] [JavaDB provider GetObjectEntry RandomRefreshCachePopulated] [] []
[Debug] [04/26/2011 09:16:10.361] [] [2060] [ZenworksAgent] [71] [ZenCache] [JavaDB provider DeleteObjectEntry RandomRefreshCachePopulated] [] []
[Debug] [04/26/2011 09:16:10.384] [] [2060] [ZenworksAgent] [71] [ZenCache] [Serializing object into temp file /tmp/zencache7958685972826852029.tmp] [] []
[Debug] [04/26/2011 09:16:10.384] [] [2060] [ZenworksAgent] [71] [ZenCache] [Object class type: java.lang.String] [] []
[Debug] [04/26/2011 09:16:10.384] [] [2060] [ZenworksAgent] [71] [ZenCache] [Serializing object of type java.lang.String] [] []
[Debug] [04/26/2011 09:16:10.385] [] [2060] [ZenworksAgent] [71] [ZenCache] [JavaDB provider PutObjectEntry RandomRefreshCachePopulated] [] []
[Debug] [04/26/2011 09:16:10.428] [] [2060] [ZenworksAgent] [71] [ZenCache] [(Thread 71) PutObject returning /var/opt/novell/zenworks/zmd/cache/ZenCache/a35b2ab6e3fc462eab09d45ad9a8bfab in 75 ms] [] []
[Debug] [04/26/2011 09:16:10.429] [] [2060] [ZenworksAgent] [71] [ConfigManager] [Retrieving Config Handlers] [] []
[Debug] [04/26/2011 09:16:10.430] [] [2060] [ZenworksAgent] [71] [ZenCache] [(Thread 71) PutObject(lastGenRefTimeUtc, UserContext{{_LocalId=26cd1a9bc87649d288b5adb22cb99449; _RemoteId=26cd1a9bc87649d288b5adb22cb99449}}) called] [] []
[Debug] [04/26/2011 09:16:10.431] [] [2060] [ZenworksAgent] [71] [ZenCache] [JavaDB provider GetObjectEntry lastGenRefTimeUtc] [] []
[Debug] [04/26/2011 09:16:10.438] [] [2060] [ZenworksAgent] [71] [ZenCache] [JavaDB provider DeleteObjectEntry lastGenRefTimeUtc] [] []
[Debug] [04/26/2011 09:16:10.476] [] [2060] [ZenworksAgent] [71] [ZenCache] [Serializing object into temp file /tmp/zencache3387837817133834136.tmp] [] []
[Debug] [04/26/2011 09:16:10.476] [] [2060] [ZenworksAgent] [71] [ZenCache] [Object class type: java.util.Date] [] []
[Debug] [04/26/2011 09:16:10.476] [] [2060] [ZenworksAgent] [71] [ZenCache] [Serializing object of type java.util.Date] [] []
[Debug] [04/26/2011 09:16:10.477] [] [2060] [ZenworksAgent] [71] [ZenCache] [JavaDB provider PutObjectEntry lastGenRefTimeUtc] [] []
[Debug] [04/26/2011 09:16:10.522] [] [2060] [ZenworksAgent] [71] [ZenCache] [(Thread 71) PutObject returning /var/opt/novell/zenworks/zmd/cache/ZenCache/e1d1ce49f62b45de840e7edd903f725d in 91 ms] [] []
[Debug] [04/26/2011 09:16:10.523] [] [2060] [ZenworksAgent] [71] [RefreshMgr] [(Thread=71; SessionId=999; RefreshType=GeneralRefresh) ProcessRefresh exited: 13.021 seconds] [] []
[Debug] [04/26/2011 09:16:10.523] [] [2060] [ZenworksAgent] [71] [RefreshMgr] [fire refresh complete event] [] []
[Debug] [04/26/2011 09:16:10.523] [] [2060] [ZenworksAgent] [71] [RefreshMgr] [FireRefreshComplete start..] [] []
[Debug] [04/26/2011 09:16:10.523] [] [2060] [ZenworksAgent] [71] [RefreshMgr] [got event admin - org.eclipse.equinox.internal.event.EventAdminImpl@126ecd2] [] []
[Debug] [04/26/2011 09:16:10.523] [] [2060] [ZenworksAgent] [71] [RefreshMgr] [Building event] [] []
[Debug] [04/26/2011 09:16:10.523] [] [2060] [ZenworksAgent] [71] [RefreshMgr] [Posting event..] [] []
[Debug] [04/26/2011 09:16:10.523] [] [2060] [ZenworksAgent] [71] [RefreshMgr] [FireRefreshComplete over.] [] []
[Debug] [04/26/2011 09:16:10.524] [] [2060] [ZenworksAgent] [71] [RefreshMgr] [fire refresh complete event done] [] []
[Debug] [04/26/2011 09:17:19.850] [] [2060] [ZenworksAgent] [80] [CommandLineManager] [Invoking Handler for cdp] [] []
[Debug] [04/26/2011 09:17:19.853] [] [2060] [ZenworksAgent] [80] [CDP: Default] [Unscheduled start with TESS] [] []
[Debug] [04/26/2011 09:17:19.862] [] [2060] [ZenworksAgent] [83] [CDP: Default] [Entering the content replication thread for type: Default] [] []
[Debug] [04/26/2011 09:17:19.863] [] [2060] [ZenworksAgent] [83] [JavaDB] [Executing: select settingValue from settings where settingName='CurrDownloadId:Default'] [] []
[Debug] [04/26/2011 09:17:19.867] [] [2060] [ZenworksAgent] [83] [CDP: Default] [Found that previous attempt to download package e4da4e4761984331ac09574cf88032f9 failed] [] []
[Debug] [04/26/2011 09:17:19.871] [] [2060] [ZenworksAgent] [83] [CDPWebCalls] [Invoking updateCDPSyncState] [] []
[Debug] [04/26/2011 09:17:19.871] [] [2060] [ZenworksAgent] [83] [ConfigManager] [Retrieving Config Handlers] [] []
[Debug] [04/26/2011 09:17:19.868] [] [2060] [ZenworksAgent] [83] [ConfigManager] [Retrieving Config Handlers] [] []
[Debug] [04/26/2011 09:17:19.872] [] [2060] [ZenworksAgent] [83] [ZenHttpClientFactory] [Using ProxyConfig: ] [] []
[Debug] [04/26/2011 09:17:19.872] [] [2060] [ZenworksAgent] [83] [ResourceManager] [Pinging URI https://10.1.254.224:443/zenworks-ping/] [] []
[Debug] [04/26/2011 09:17:19.874] [] [2060] [ZenworksAgent] [80] [CommandLineManager] [Handler returned successfully cdp] [] []
[Debug] [04/26/2011 09:17:19.895] [] [2060] [ZenworksAgent] [83] [ResourceManager] [***************** Exception Dump ***********************] [] []
[Debug] [04/26/2011 09:17:19.895] [] [2060] [ZenworksAgent] [83] [ResourceManager] [Unhandled IOException in ping method.] [] []
[Debug] [04/26/2011 09:17:19.895] [] [2060] [ZenworksAgent] [83] [ResourceManager] [------------------------------------------------------------------------------------] [] []
[Debug] [04/26/2011 09:17:19.895] [] [2060] [ZenworksAgent] [83] [ResourceManager] [Message: connect timed out] [] []
[Debug] [04/26/2011 09:17:19.895] [] [2060] [ZenworksAgent] [83] [ResourceManager] [Exception Type: class java.net.SocketTimeoutException] [] []
[Debug] [04/26/2011 09:17:19.895] [] [2060] [ZenworksAgent] [83] [ResourceManager] [Stack: java.net.PlainSocketImpl.socketConnect(Native Method)] [] []
[Debug] [04/26/2011 09:17:19.895] [] [2060] [ZenworksAgent] [83] [ResourceManager] [------------------------------------------------------------------------------------] [] []
[Debug] [04/26/2011 09:17:19.896] [] [2060] [ZenworksAgent] [83] [ResourceManager] [***************** End Exception Dump ***********************] [] []
[Debug] [04/26/2011 09:17:19.896] [] [2060] [ZenworksAgent] [83] [ZenHttpClientFactory] [Using ProxyConfig: ] [] []
[Debug] [04/26/2011 09:17:19.896] [] [2060] [ZenworksAgent] [83] [ResourceManager] [Pinging URI https://10.1.254.224:443/zenworks-ping/] [] []
[Debug] [04/26/2011 09:17:20.037] [] [2060] [ZenworksAgent] [83] [ZenSSLSocketFactory] [Validating hostname for valid session, timeout: 86400] [] []
[Debug] [04/26/2011 09:17:20.174] [] [2060] [ZenworksAgent] [83] [ResourceManager] [ResourceManager, final ping state for host 'zcm0302.priv.vangenechten.com' : GOOD] [] []
[Debug] [04/26/2011 09:17:20.326] [] [2060] [ZenworksAgent] [83] [ZenSSLSocketFactory] [Validating hostname for valid session, timeout: 86400] [] []
[Debug] [04/26/2011 09:17:20.572] [] [2060] [ZenworksAgent] [83] [CDPWebCalls] [Error updating CDP Object sync state. Error code: 1. Message: com.novell.zenworks.datamodel.exceptions.InternalDataModelException: org.hibernate.exception.ConstraintViolationException: could not insert: (com.novell.zenworks.datamodel.objects.content.ContentSyncState)] [] []
[Debug] [04/26/2011 09:17:20.573] [] [2060] [ZenworksAgent] [83] [CDP: Default] [ContentDownloadThread::UpdateCDPSyncState(e4da4e4761984331ac09574cf88032f9, UNAVAILABLE) failed while resetting previous download: (Code: 1, Message: com.novell.zenworks.datamodel.exceptions.InternalDataModelException: org.hibernate.exception.ConstraintViolationException: could not insert: (com.novell.zenworks.datamodel.objects.content.ContentSyncState))] [] []
[Debug] [04/26/2011 09:18:01.190] [] [2060] [ZenworksAgent] [65] [File Upload Servlet] [Upload Request Received: (65) "type=status&filename=Status_244c80127b0abc4383fecee68185bef1_1303802280436.zip" from 10.11.249.123 (10.11.249.123)] [] []
[Debug] [04/26/2011 09:18:01.219] [] [2060] [ZenworksAgent] [65] [File Upload Servlet] [It took 9 milliseconds to upload the file data.] [] []
[Debug] [04/26/2011 09:18:01.219] [] [2060] [ZenworksAgent] [65] [File Upload Servlet] [Received file /var/opt/novell/zenworks/work/collection/status/Status_244c80127b0abc4383fecee68185bef1_1303802280436.zip from 10.11.249.123] [] []
[Debug] [04/26/2011 09:18:01.222] [] [2060] [ZenworksAgent] [65] [CR] [Executing query 'delete from CollectionEntries where localPath = '/var/opt/novell/zenworks/work/collection/status/Status_244c80127b0abc4383fecee68185bef1_1303802280436.zip''] [] []
[Debug] [04/26/2011 09:18:01.222] [] [2060] [ZenworksAgent] [65] [JavaDB] [Executing: delete from CollectionEntries where localPath = '/var/opt/novell/zenworks/work/collection/status/Status_244c80127b0abc4383fecee68185bef1_1303802280436.zip'] [] []
[Debug] [04/26/2011 09:18:01.378] [] [2060] [ZenworksAgent] [65] [File Upload Servlet] [Upload Request Finished (65) 200] [] []
Full log file can be found here:
ftp://ftp.vangenechten.com/zmd-messages2.log
I see a few exceptions but nothing bad with CDP... can you please quote what is wrong in the code so other people with the same problem can see this. Already thanks very much , i didn't know this commands..
Joeri

Assignment Status - Summary is blank

Hi,
I cannot see any list of assignments (devices or users) in either bundles or policies.
ZCM 10.3 on Windows boxes.
Scenario:
There may be numbers in the assignment status (Targeted Devices, Effective Device,s Not Effective, Pending).
For example, Pending has a number of 600.
If I click on this 600 number I am redirected to the Bundle Status page (Device assignments-Devices Pending).
On this page, the list is empty.
The table says 1 - 10 of 600, but there is nothing listed at all.
I can navigate through the pages, 11 - 20 of 600, but still nothing is listed.
Any ideas?
Known problem?

ClemClark,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

How to use a custom Persistence Manager

I'm experimenting with implementing a custom Persistence Manager for CRX/CQ5. How the underlying implementation works is not important, the issue I'm having seems instead to be related to classloading or OSGi inside CQ5.
I've implemented a custom Persistence Manager (implements org.apache.jackrabbit.core.persistence.PersistenceManager) and a custom FileSystem (implements org.apache.jackrabbit.core.fs.FileSystem).
I've verified that both implementations function correctly with plain Apache Jackrabbit (version 2.4.0, the same version used internally by CQ5.5).
I've packaged my implementation and all its dependencies as an OSGi bundle and installed it to CQ5.5. All dependencies as resolved and the bundle status in the OSGi console is "Active".
I then followed these instructions for configuring the CQ 5.5 repository to use my PersistenceManager and FileSystem implementations:
http://dev.day.com/docs/en/cq/current/core/administering/persistence_managers.html#The%20T ar%20Persistence%20Manager
The configuration seems to be read just fine but I get the following exception when restarting CQ:
23.04.2012 09:20:23.714 *ERROR* [FelixStartLevel] com.day.crx.sling.server [com.day.crx.sling.server.impl.jmx.ManagedRepository]
The activate method has thrown an exception (org.apache.jackrabbit.core.config.ConfigurationException:
Configured class com.example.XXFileSystem does not implement org.apache.jackrabbit.core.fs.FileSystem. Please fix the repository configuration.) org.apache.jackrabbit.core.config.ConfigurationException: Configured class com.example.XXFileSystem does not implement org.apache.jackrabbit.core.fs.FileSystem. Please fix the repository configuration.
    at org.apache.jackrabbit.core.config.BeanConfig.newInstance(BeanConfig.java:179)
    at org.apache.jackrabbit.core.config.RepositoryConfigurationParser$6.getFileSystem(RepositoryConfigurationParser.java:1077)
    at org.apache.jackrabbit.core.config.VersioningConfig.getFileSystem(VersioningConfig.java:94)
    at com.day.crx.core.CRXRepositoryImpl.createVersionManager(CRXRepositoryImpl.java:841)
    at org.apache.jackrabbit.core.RepositoryImpl.<init>(RepositoryImpl.java:305)
    at com.day.crx.core.CRXRepositoryImpl.<init>(CRXRepositoryImpl.java:283)
    at com.day.crx.core.CRXRepositoryImpl.create(CRXRepositoryImpl.java:258)
    at com.day.crx.core.CRXRepositoryImpl.create(CRXRepositoryImpl.java:243)
    at com.day.crx.sling.server.impl.jmx.ManagedRepository.activate(ManagedRepository.java:164)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.felix.scr.impl.helper.BaseMethod.invokeMethod(BaseMethod.java:227)
    at org.apache.felix.scr.impl.helper.BaseMethod.access$500(BaseMethod.java:38)
    at org.apache.felix.scr.impl.helper.BaseMethod$Resolved.invoke(BaseMethod.java:591)
    at org.apache.felix.scr.impl.helper.BaseMethod.invoke(BaseMethod.java:472)
    at org.apache.felix.scr.impl.helper.ActivateMethod.invoke(ActivateMethod.java:146)
    at org.apache.felix.scr.impl.manager.ImmediateComponentManager.createImplementationObject(ImmediateComponentManager.java:226)
    at org.apache.felix.scr.impl.manager.ImmediateComponentManager.createComponent(ImmediateComponentManager.java:118)
    at org.apache.felix.scr.impl.manager.DelayedComponentManager.createRealComponent(DelayedComponentManager.java:95)
    at org.apache.felix.scr.impl.manager.AbstractComponentManager$Registered.getService(AbstractComponentManager.java:1296)
    at org.apache.felix.scr.impl.manager.DelayedComponentManager.getService(DelayedComponentManager.java:88)
    at org.apache.felix.framework.ServiceRegistrationImpl.getFactoryUnchecked(ServiceRegistrationImpl.java:310)
    at org.apache.felix.framework.ServiceRegistrationImpl.getService(ServiceRegistrationImpl.java:221)
    at org.apache.felix.framework.ServiceRegistry.getService(ServiceRegistry.java:292)
    at org.apache.felix.framework.Felix.getService(Felix.java:3010)
    at org.apache.felix.framework.BundleContextImpl.getService(BundleContextImpl.java:329)
    at org.osgi.util.tracker.ServiceTracker.addingService(ServiceTracker.java:442)
    at org.apache.aries.jmx.whiteboard.Activator$MBeanTracker.addingService(Activator.java:101)
    at org.osgi.util.tracker.ServiceTracker$Tracked.customizerAdding(ServiceTracker.java:896)
    at org.osgi.util.tracker.AbstractTracked.trackAdding(AbstractTracked.java:261)
    at org.osgi.util.tracker.AbstractTracked.track(AbstractTracked.java:233)
    at org.osgi.util.tracker.ServiceTracker$Tracked.serviceChanged(ServiceTracker.java:840)
    at org.apache.felix.framework.util.EventDispatcher.invokeServiceListenerCallback(EventDispatcher.java:871)
    at org.apache.felix.framework.util.EventDispatcher.fireEventImmediately(EventDispatcher.java:733)
    at org.apache.felix.framework.util.EventDispatcher.fireServiceEvent(EventDispatcher.java:662)
    at org.apache.felix.framework.Felix.fireServiceEvent(Felix.java:3765)
    at org.apache.felix.framework.Felix.registerService(Felix.java:2877)
    at org.apache.felix.framework.BundleContextImpl.registerService(BundleContextImpl.java:251)
    at org.apache.felix.scr.impl.manager.AbstractComponentManager.registerService(AbstractComponentManager.java:456)
    at org.apache.felix.scr.impl.manager.AbstractComponentManager.registerComponentService(AbstractComponentManager.java:508)
    at org.apache.felix.scr.impl.manager.AbstractComponentManager$Unsatisfied.activate(AbstractComponentManager.java:1157)
    at org.apache.felix.scr.impl.manager.AbstractComponentManager.activateInternal(AbstractComponentManager.java:334)
    at org.apache.felix.scr.impl.manager.AbstractComponentManager.enable(AbstractComponentManager.java:158)
    at org.apache.felix.scr.impl.config.ImmediateComponentHolder.enableComponents(ImmediateComponentHolder.java:313)
    at org.apache.felix.scr.impl.BundleComponentActivator.loadDescriptor(BundleComponentActivator.java:241)
    at org.apache.felix.scr.impl.BundleComponentActivator.initialize(BundleComponentActivator.java:147)
    at org.apache.felix.scr.impl.BundleComponentActivator.<init>(BundleComponentActivator.java:111)
    at org.apache.felix.scr.impl.Activator.loadComponents(Activator.java:274)
    at org.apache.felix.scr.impl.Activator.bundleChanged(Activator.java:192)
    at org.apache.felix.framework.util.EventDispatcher.invokeBundleListenerCallback(EventDispatcher.java:807)
    at org.apache.felix.framework.util.EventDispatcher.fireEventImmediately(EventDispatcher.java:729)
    at org.apache.felix.framework.util.EventDispatcher.fireBundleEvent(EventDispatcher.java:610)
    at org.apache.felix.framework.Felix.fireBundleEvent(Felix.java:3754)
    at org.apache.felix.framework.Felix.startBundle(Felix.java:1780)
    at org.apache.felix.framework.Felix.setActiveStartLevel(Felix.java:1156)
    at org.apache.felix.framework.StartLevelImpl.run(StartLevelImpl.java:266)
    at java.lang.Thread.run(Thread.java:662)
Anyone have any idea how to get past this?
My FileSystem class most certainly does implement org.apache.jackrabbit.core.fs.FileSystem, as verified by that it works just fine with Jackrabbit.
I've also made sure that I use the exact same jackrabbit-core jar file in my bundle that is included in the com.day.crx.sling.server bundle.

I would do that, but none of the bundles in CQ5.5 export the jackrabbit-core interfaces, so I get an unsatisfied dependency (or whatever the OSGi term is) then.
So that's why I tried including it in my bundle as well.
The only place that I can see jackrabbit-core in the provided bundles is loaded internally in the Bundle Classpath of the com.day.crx.sling.server bundle.
Should I try modifying that manifest so that it gets exported?

CRX/DE failing on Publish nodes with 404 for JSON data

I'm in the process of rebuilding our author and publish staging instances using the 2.1 service pack for CQ5.5, and now I'm seeing problems with CRX/DE on both publish nodes on two difference machines.
We get this error whenever we try to pull up CRX/DE on these two nodes:
11.03.2013 13:18:40.222 *INFO* [12.104.103.30 [1363022320201] GET /crx/server/crx.default/jcr%3aroot/.1.json HTTP/1.1] org.apache.sling.engine.impl.SlingRequestProcessorImpl service: Resource /crx/server/crx.default/jcr:root/.1.json not found
The app works fine on the author node, and the websites themselves still appear to serve correctly from the publish instances.
The odd thing is that, after I saw this problem, I wiped both publish instances and restored from a backup I had made this morning and restarted them to find that the problem persists.
Any thoughts? I had thought myself done with this process until this issue appearing suddenly. At the time I was rebuilding bundles on the Author node after having installed an updated content package and replicating it to the publish nodes. I was attempting to rebuild the bundles on the Publish nodes when I saw the CRX/DE problem.

Hi,
It seems to be access issue to me even though you have logged in as admin. To confirm this do the below.
1. Open a browser and log in to your author instance using admin rights.
2. Now using same browser now access http://localhost:4502/crx/server/crx.default/jcr:root/.1.json which is actually request to access jcr respository. When you access this link you will see the proper JSON response return.
Now
1. Open another browser (not same as above because above browser does have your cq session) and just access http://localhost:4502/crx/server/crx.default/jcr:root/.1.json you will see a 404 because anonymous user doesnt have access to it.
If above is true then plz try to look at your permissioning for jcr:root ("/") and if it looks good then check for authorization bundles status in felix console and check logs.
Also try to access crx explorer, if you can see the hierarchy http://<host>:<port>/crx/explorer/browser/index.jsp
Thanks,
Pawan

QoS on Catalyst 6500

We have the following QoS config running on Edge, Distributions and Cores and got the following error.
âpriority command is not supported in output direction for this interface
Configuration failed on: Port-channelâ
We had opened a TAC case and they said â PFC QoS does not support these policy map class commands:
bandwidth
priority
queue-limit
random-detect
set qos-group
service-policy
How can we prioritize voip traffic. On our monitoring application, it says queues empty. Even if the priority command is not working there should be traffic in the queue.Different version of supervisors in Distribution (sup720) and COREs (Sup2).
Any suggestions? Attached document gives Config details.

Are your Access Layer switches also 6500s? What Supervisor(s) are running in your 6500s & what CatOS or CatIOS are you running?
It sounds like you are redefining your trust boundary at every layer (Access, Distribution, Core). Did you get a chance to look over this SRND document?
http://www.cisco.com/application/pdf/en/us/guest/netsol/ns432/c649/ccmigration_09186a008049b062.pdf
Here's an example of our L2 6513 with a WS-X6724 which has 1p3q8t for QoS Scheduling:
interface GigabitEthernet1/2
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
no ip address
logging event link-status
logging event bundle-status
logging event trunk-status
wrr-queue bandwidth 5 25 70
wrr-queue queue-limit 5 25 40
wrr-queue random-detect min-threshold 1 80 100 100 100 100 100 100 100
wrr-queue random-detect min-threshold 2 80 100 100 100 100 100 100 100
wrr-queue random-detect min-threshold 3 50 60 70 80 90 100 100 100
wrr-queue random-detect max-threshold 1 100 100 100 100 100 100 100 100
wrr-queue random-detect max-threshold 2 100 100 100 100 100 100 100 100
wrr-queue random-detect max-threshold 3 60 70 80 90 100 100 100 100
wrr-queue cos-map 1 1 1
wrr-queue cos-map 2 1 0
wrr-queue cos-map 3 1 4
wrr-queue cos-map 3 2 2
wrr-queue cos-map 3 3 3
wrr-queue cos-map 3 4 6
wrr-queue cos-map 3 5 7
priority-queue cos-map 1 5
udld port
mls qos trust dscp
rmon collection stats 6001 owner monitor
channel-group 2 mode desirable non-silent
interface Port-channel2
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
no ip address
mls qos trust dscp
We also use NetMRI and you're correct, because the Cat 6500 PFC performs classification, marking, mapping, and policing functions, but the queuing and dropping policies are administered by the line cards, there are no MIBs for NetMRI to poll.
HTH
Steve

2.4GHZ clients very slow speeds with AP3600

5508 WLC (7.5.102)
AP36021
We currently have a test WiFi SSID setup that uses basic mac filtering on our WLC's
WLAN is configured with WPA and WPA2 L2 Security with WPA Policy and WPA2 Encryption.
For some reason we seem to be getting very slow speeds on clients with 2.4GHZ
for example speedtest.net I get 70mg upload and 65mg download on 5GHZ devices and about 1-3mg download and 1mg upload for 2.4GZ devices!
AP36021 are dual band with 4 channels (2 x 2.4Ghz and 2 x 5Ghz)
fyi - There are no dropped packets on the client stats via Prime mgmt that use 2.4GHZ
Any ideas here?

Foreign Primary WLC (let me know if you need the Anchor controller ouput as well)
We have 3 ports configured as 0/12 trunked
interface GigabitEthernet0/12
description + WLC ****
switchport access vlan 999
switchport trunk encapsulation dot1q
switchport trunk native vlan 999
switchport trunk allowed vlan 10,30,40
switchport mode trunk
switchport nonegotiate
load-interval 30
no cdp enable
channel-group 3 mode on
spanning-tree portfast
end
Building configuration...
Current configuration : 330 bytes
interface Port-channel3
description + WLC ****
switchport access vlan 999
switchport trunk encapsulation dot1q
switchport trunk native vlan 999
switchport trunk allowed vlan 10,30,40
switchport mode trunk
switchport nonegotiate
logging event trunk-status
logging event bundle-status
load-interval 30
end
AP switch port config
Building configuration...
Current configuration : 617 bytes
interface GigabitEthernet4/32
description AP36021
switchport
switchport access vlan 30
switchport mode access
switchport voice vlan 20
load-interval 30
speed auto 10 100
wrr-queue bandwidth 5 90 5
wrr-queue queue-limit 5 80 5
wrr-queue random-detect min-threshold 2 70 100 100 100 100 100 100 100
wrr-queue random-detect min-threshold 3 70 100 100 100 100 100 100 100
wrr-queue random-detect max-threshold 2 100 100 100 100 100 100 100 100
wrr-queue cos-map 2 1 0 1 2 4
wrr-queue cos-map 3 1 3 6 7
no snmp trap link-status
mls qos trust cos
no mdix auto
spanning-tree portfast
end
show wlan 4
WLAN Identifier.................................. 4
Profile Name..................................... WLKPV
Network Name (SSID).............................. WLKPV
Status........................................... Enabled
MAC Filtering.................................... Enabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status
    Radius Profiling ............................ Disabled
     DHCP ....................................... Disabled
     HTTP ....................................... Disabled
    Local Profiling ............................. Disabled
     DHCP ....................................... Disabled
     HTTP ....................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
--More-- or (q)uit
Number of Active Clients......................... 21
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 7200 seconds
User Idle Timeout................................ Disabled
Sleep Client..................................... disable
Sleep Client Timeout............................. 12 hours
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... hellotest
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ new-byod
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
WLAN Layer2 ACL.................................. unconfigured
mDNS Status...................................... Enabled
mDNS Profile Name................................ default-mdns-profile
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
PMIPv6 Mobility Type............................. none
    PMIPv6 MAG Profile........................... Unconfigured
    PMIPv6 Default Realm......................... Unconfigured
--More-- or (q)uit
    PMIPv6 NAI Type.............................. Hexadecimal
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream      Downstream
Average Data Rate................................   0             0
Average Realtime Data Rate.......................   0             0
Burst Data Rate..................................   0             0
Burst Realtime Data Rate.........................   0             0
Per-Client Rate Limits........................... Upstream      Downstream
Average Data Rate................................   0             0
Average Realtime Data Rate.......................   0             0
Burst Data Rate..................................   0             0
Burst Realtime Data Rate.........................   0             0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
--More-- or (q)uit
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
   Authentication................................ Global Servers
   Accounting.................................... Global Servers
      Interim Update............................. Disabled
      Framed IPv6 Acct AVP ...................... Prefix
   Dynamic Interface............................. Disabled
   Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
Security
   802.11 Authentication:........................ Open System
   FT Support.................................... Disabled
   Static WEP Keys............................... Disabled
   802.1X........................................ Disabled
   Wi-Fi Protected Access (WPA/WPA2)............. Enabled
      WPA (SSN IE)............................... Disabled
      WPA2 (RSN IE).............................. Enabled
         TKIP Cipher............................. Disabled
         AES Cipher.............................. Enabled
--More-- or (q)uit
      Auth Key Management
         802.1x.................................. Disabled
         PSK..................................... Enabled
         CCKM.................................... Disabled
         FT-1X(802.11r).......................... Disabled
         FT-PSK(802.11r)......................... Disabled
         PMF-1X(802.11w)......................... Disabled
         PMF-PSK(802.11w)........................ Disabled
      FT Reassociation Timeout................... 20
      FT Over-The-DS mode........................ Enabled
      GTK Randomization.......................... Disabled
      SKC Cache Support.......................... Disabled
      CCKM TSF Tolerance......................... 1000
   WAPI.......................................... Disabled
   Wi-Fi Direct policy configured................ Disabled
   EAP-Passthrough............................... Disabled
   CKIP ......................................... Disabled
   Web Based Authentication...................... Disabled
   Web-Passthrough............................... Disabled
   Conditional Web Redirect...................... Disabled
   Splash-Page Web Redirect...................... Disabled
   Auto Anchor................................... Enabled
   FlexConnect Local Switching................... Disabled
--More-- or (q)uit
   flexconnect Central Dhcp Flag................. Disabled
   flexconnect nat-pat Flag...................... Disabled
   flexconnect Dns Override Flag................. Disabled
   flexconnect PPPoE pass-through................ Disabled
   flexconnect local-switching IP-source-guar.... Disabled
   FlexConnect Vlan based Central Switching ..... Disabled
   FlexConnect Local Authentication.............. Disabled
   FlexConnect Learn IP Address.................. Enabled
   Client MFP.................................... Optional
   PMF........................................... Disabled
   PMF Association Comeback Time................. 1
   PMF SA Query RetryTimeout..................... 200
   Tkip MIC Countermeasure Hold-down Timer....... 60
AVC Visibilty.................................... Disabled
AVC Profile Name................................. None
Flow Monitor Name................................ None
Split Tunnel (Printers).......................... Disabled
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
--More-- or (q)uit
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID     IP Address            Status
4           10.x.x.x          Up
4           10.x.x.x         Up
802.11u........................................ Disabled
MSAP Services.................................. Disabled

More ZPM in ZCM questions--intended behavior?

Perhaps I am doing something wrong or not looking in the correct spot.
If I use ZPM in ZCM, there seems to be some deficiencies:
a) Refresh of patch status. Meaning I go into Patch Management, click on a patch and select Actions -> Update Cache. I get the icon to change animation but it NEVER changes status unless you manually refresh the web browser. I do not believe that ZPM 6.4.x (Novell branded product) behaves this way. I think the ZPM 6.4.x will refresh the page automatically for you so you know when it's done downloading.
b) Patch deployment status - you can't really tell what's going on with the devices. In ZPM 6.4.x I can go into devices and I see animations as to what the machine status is (is it on, is it doing a DAU, is it deploying a patch). I don't seem to be able to find any of this information in ZCM (meaning I can't just look at the device icon and see what it's doing, I have to go into the patches tab or something to see if it got deployed, but I don't know what the "live" status of the machine is).
c) Patch Deploys in general - I am pretty sure I can go into ZPM 6.4.x and find my deployment tab and see what I chose to deploy, when, and to which machines. I don't seem to be able to find this in ZCM. I do see something like "deploy on some heinous formatted date/time" but that's it. I have to scrounge around inside the deploy to the actions section and even then it doesn't reall show me in a nice format which machines it was deployed to, let alone the status of the machines.
Again, I could be looking in the wrong spot, or perhaps it's not there.

In response here we've gone through great efforts to make the integration consistent with ZCM behavior.
a) Only a couple of pages do auto refresh of status in ZCM. This is to allow for the greatest performance. ZPM is consistent with the rest of the ZCM behavior such as bundle status and policy status. By refreshing the page status updates.
b) Since all deployments are done using the bundle system in ZCM you can track all status of ZPM deployments by looking at the Bundle status. There is a ZPM Assignment bundle created for each deployment. It should have status of deliveries and errors if you look at it.
c) You should be able to go to the ZPM Assignment bundle and look at the Install Action Set. It will show you which patches are being deployed.

Cannot register asset to the zone

I continue to get an error code: -21 could not determine device type OS.
I get this when I goto a command prompt and type zac register https://192.168.1.251
I type in the right username and password, but it's not working and gives this error back.
How else can I get this asset registered?
ZENworks Adaptive Agent Version: 10.3.1.34138

Originally Posted by spond
Motc7,
What I am saying is: If it's Win7 SP1 or W2K8 SP1 that you can't
register, then you need a patch which you can find at
NOVELL: Downloads - ZCM 10.3.1 Combined patch for Zone performance degrades (see TID 7006967), Allow Windows 7 SP1 device to register (see TID 7007952), ZCC bundle status takes a long time to display (see TID 7006325)
if it's /not/ one of thise scenarios, then you have a different
problem, and we'd need to look into that, but I didn't want to waste
time if we already had a fix...
Shaun Pond
o.k. thanks for responding. Now just trying to get the login info for the Sybase db utility and I'll let you know the rest. I do need to apply that patch.

Bundle Status

Similar Messages

Maybe you are looking for