Bundle the messages based on divisions with BPM!!
Hi Experts,
I have one question about payload bundling; I do get 20 divisions xml message roughly 100 a day. The file name explains which division that file belongs to like (XML_DivisionNumber_TimeStamp.xml). This divisio number comes with N104 element in source.
I put couple of steps in BPM as follows:
1. Block with Correlation Activate - Correlation on N104 element - one Deadling branch and Exception handler on Block step. I put control step in Deadline and Exception branch one for Error and Exception for timeout - I have configured Alerts.
2. Loop step with condition, File = "" | File = N104
3. Receiving Step with Correlation on N104;
4. Container Step for Append message payloads
5. Container Step for File container Variable assigned N104 element from interface
6. Transformation after block
7. Sender Step.
Could you please any one tell where I am wrong, I am not getting Alerts too..
It is going into endless loop?
Thanks
Regards
San
Hi ,
are you getting desired output?? cross check your BPM with CollectPatternTime dependent, some thing you have missed...
when you monitor your BPM everything fine???
Regards,
Raj
Similar Messages
-
Way to change the Message based on Imported IDoc
Hi,
I just want to know if there is way to change the message based on Imported IDoc?
Basically I imported an IDoc from R/3, this Imported Object would display just one of the Segment for where there are max allowable limit is n segment (the same segment), now during message mapping I need to have more than one Segment of same type...Wasn't sure how to add more segments?
Thanking in advanceHi Rajan,
If I have understood you correctly you,you mean that you have imported an Idoc with a segment with cardinality 0..unbounded(n) and you want to reproduce the segment n times in the target structure.
you need not change the cardinality.This needs to be done in the mapping itself.just map the source structure to the target segment, handling the context properly such that for every occurence of the source structure the corresponding segment is produced in the target.
Regards,
Sulakshana -
Is there a way to view the messages I sent along with files in Adobe Send?
Is there a way to view the messages I sent along with files in Adobe Send?
Too bad...I wish that feature was still there that was in SendNow...I also have to go and get the recipients email each time I send a file instead of Send remembering the email addresses I have sent to in the past.
Are any of the great features of SendNow going to be brought over into Send? Or are they just gone...I am a paying CC user...just curious what's going on at Adobe...Thanks for your very quick response though...I guess my message content is gone. -
When I open up my I Tunes account with my IPod plugged into the computer, I get the message" IPod is synced with another library" I only have one Library. None of the music or Apps that I have purchased shows up.
sorry...I am computer illiterate....not sure what you were asking!
-
I can't get rid of the message, n error occurred with the publication of album. It just keep coming back, and can't move around in IPhoto.
Okay, folks, after a 3 1/2 hour phone call with a (very patient) telephone support person at Blackberry, here's what I learned.
You can check your USB drivers this way:
Plug in your phone into your USB drive. Assuming your Blackberry is "seen" by your computer...
Go into the Device Manager on your computer (control panel)
Expand the Universal Serial Bus controllers item on the bottom of the list
Right-click on BlackBerry Smartphone and choose Properties
Click on the Driver tab
Click on the Driver Details button
You should see one driver. I saw two. The one the BlackBerry likes is the RimUsb one.
So here's what NOT to do: We tossed the entire driver that was the "extra". This effectively made using my mouse and keyboard impossible, as they are USB, and sent my poor husband into the basement to find a million-year-old keyboard (and then a mouse) with the old fashioned kind of connectors (PS2). Bleh. Don't do that.
Here's what I did that worked (not saything this will work for you -- this modifies the Registry so better do a system backup with that backup and restore if you're nervous about this sort of thing):
From the start menu, choose run, and type regedit to get into the Registry editor.
Follow this file path: Computer, HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, Control, Class
Click on: {36FCE60-C465-11CF-8056-4445535400000}
If there's an item on the right called "UpperFilters", delete it. (see pictures)
Hope this helps someone.
Karin
First pic: shows "before"
Second pic: shows full file path and "after" -
I can't connect with the Facebook server. When I tried to connect with Facebook when playing Candy Crush, I got the message to "enter password for "" in Settings. When I go to Settings, it says "There was a problem accessing your account. Please reenter the password for [my name]." Then, when I type in my password, I get the message "unable to communicate with server."
I tried deleting my Facebook account and then reinstalling it, but the problem continues. Any ideas?Dear Tomarshe
I had the same problem a couple of weeks back.
What I did was that I restarted that Ipad of mine and voila!
Problem solved!
hope this helped!
- DASHdotDASHdot -
i asked for the new apple ID and i got the message that pls check with itune support to complete transaction. what can i do?
Contact iTunes Support to complete this transaction.
http://www.apple.com/support/itunes/contact/ -
I'm unable to open my Office Word for Mac. The message say's check with developer to make sure Microsoft Word works with this version of Mac OS X.
Orginally I downloaded OFFICE from the Apple Store App, so unable to reinstall as it suggest.Which version of Office, 2004, 2008 or 2011
and
MS Office is not available from the App Store, so where did you get it? -
I keep getting the message unknown error (13019) I uploaded the upgrade for I tunes and bought some music and that went ok but when I went to sync it everything goes ok till the end and I get the error message .I took I tunes off the comuter and re downloaded it ,but the process is the same
Did you try all the suggestions mentioned in this article? iTunes Error 13019 during sync
Some users solved the problem by removing duplicate songs: https://discussions.apple.com/message/17047386#17047386 -
Please help! My mac is about 6 months old and I was just playing with my keys and stuck it in the USB port and then it crashed and won't turn on, it's not picking up the charger (the little led light isn't on) and pressing the power button does absolutely nothing
Don't be so surprised, people have stuck worse things in worse places before and it was on purpose
+1
How am I meant to get the the apple menu if the laptop won't then on
Reset the SMC first. If this doesn't work, reset PRAM. Move down troubleshoot with links below. First, SMC reset for MBP models 2009 and later:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Intel-based Macs: Resetting the System Management Controller (SMC)
Resetting your Mac's PRAM and NVRAM
Resolve startup issues and perform disk maintenance with Disk
Troubleshooting: My computer won't turn on -
I have tried clearing everything, rebooting, I just do not know what this actual error is. I was on the website, went back about 30 minutes later and that message. No other websites are bringing up this error.
If FCP captures the footage then capture with FCP and import the files into Premiere. Just a few extra clicks.
Or read this:
Cannot start DV or HDV video capture in Premiere Pro CS4 or later -
I don't know why I keep getting the following messge for a recent album I created in iphoto:
"An error occurred with the publication of album (name of album). Do you want to remove the album from your library?" In smaller letters under that message, is "The feed could not be found or is invalid." There are 2 buttons to click - either "Remove Album" or "Keep Album". Never had this issue before, did not do anything different this time.
Mac OS X v. 10.6.8
iphoto 09 v. 8.1.2 (424)Is this an album you're publishing as a MMe Gallery? If so delete the album and gallery, create a new album and gallery and try publishing again.
OT -
When i park a document in FV60 i should get the messages based on conditions;
Hi All,
In FV60 when amount and amount in doc currency is not equal and if i park it should through as error message as 'Posting is possible with Zero balance',i have done this and it is working.
now when amount and amount in doc currency is equal means 'zero' it should succesfully park the document,but i am getting same error message as above.
Can any one please helpme out how to solve this.
Thanks,
RamHi,
do you really think someone could guess with the poor informations you give ??
regards
Fred -
I get the message "Untrusted Connection" just with Firefox; not with IExplorer.
This Connection is Untrusted
You have asked Firefox to connect securely to bay174.mail.live.com, but we can't confirm that your connection is secure.
Technical Details
An error occurred during a connection to bay174.mail.live.com. Peer's certificate has been marked as not trusted by the user. (Error code: sec_error_untrusted_cert)
(The option to "I understand the risks" is not there.)You can try to rename the cert8.db file (cert8.db.old) and delete the cert_override.txt file in the Firefox profile folder to remove intermediate certificates and exceptions that Firefox has stored.
If that has helped to solve the problem then you can remove the renamed cert8.db.old file.
Otherwise you can rename (or copy) the cert8.db.old file to cert8.db to restore the previously stored intermediate certificates.
Firefox will automatically store intermediate certificates when you visit websites that send such a certificate.
See also:
*http://www.networking4all.com/en/support/tools/site+check/report/?fqdn=bay174.mail.live.com&protocol=https -
I recently moved out of state and left my old computer with my roommate. I'm trying to sync my iPod but am getting the message iPod is synced with another iTunes library. Any suggestions?
How to use your iPod to move your music to a new computer
Maybe you are looking for
-
This issue is similar to a question that was asked in Dec 2010, but was not answered, and has not been archived. I'm hoping someone might have an idea. OS: Vista iTunes: 10.3.1.55 iPhone 4: 4.2.8 Problem with iPhone contacts synchronization settings
-
Ever since I installed the 10.4.6 update when I open safari it will not show any JPEGs... This problem happened immideatley after I did the install. Any web page having jpeg files just show an empty space where ever ther should be a photo. If anyone
-
Partial reversal of ARE-1 certificate
Dear All, Can anybody tell me, if it is possible to reverse an ARE-1 Certificate partially but not for the entire document. Rgds,
-
NEWS FROM TECH SUPPORT - UPDATED LINK COMING to SOLVE OUTLOOK SYNCING ETC
I talked to Tech support today Regarding Outlook sync... there is a work around... defining a hotmail account (with hotmail connector) in outlook , making hotmail the contact database.... it will sync to the online hotmail account . when you then cr
-
Ipod touch 4th gen dead pixels
Guys, my ipod touch 4th gen has a dead pixel lines in the upper portion of my screen and sad thing is its no longer within warranty? does reinstall will fix this or lcd replacement is the way to go?