BUPA_SEND cannot find the Bank Key in GTS

Hi
I have transferred bank master data using t-code /SAPSLL/BANMAS_DIRR3. I can see the bank in GTS. During the transfer the country ISO code was used as the prefix to the Bank Key (USXXXXXX) to make the External number. I then use BUPA_SEND to send over the account information which does not go over on the inital data tranfer. when I do this the Idoc cannot find the bank. The GTS  tables BNKA and BUT0BK are not populated. Should they? Has anyone had this problem.

Hi Boer,
Is this bug resolved? If yes, please let us know the SAP note number.
Regards,
Lakshmikanth   

Similar Messages

  • I have a uk mac, i cannot find the 'at' key on the keyboard

    sometimes my @ key works, sometimes it does not. I have parallel installed, when I access quickbooks within windows, then the @ key will not respond so I cannot enter email addresses within quickbooks on my mac pro

    plas y darren wrote:
    when I access quickbooks within windows, then the @ key will not respond
    So, your problem is not, "i have a uk mac, i cannot find the 'at' key on the keyboard", but, "the @ key does not work in Quicken Win, which I run under Parallels". If that is your problem, then first check if it works with other Win applications (eg, NotePad). If it does, then the problem is with Quicken -- check the Quicken docs, support KB, or support forum. If it doesn't (but it does work with Mac apps), check Parallels docs, support KB, or support forum.

  • Cannot find the WPA key

    I'm trying to connect my laptop to the internet. In the "WPA - Personal Needed for Connection" screen, it keeps asking for a passphrase, which is supposed to be the WPA key. I can't find my WPA key; I was hoping it was the Encryption Key, but it's not.
    In order to find my WPA key, I tried to type in 192.168.1.1, and then type in admin as the the password, but it won't let me in. The password window just keeps popping up, and when I continue to type in my password correctly, it simply leads me to a purple screen and says "access denied"
    Help, please. :<

    Hi beavis01.....
    It seems like you changed your router password...So, in order to access your router page, there is actually one way....You need to hard reset the router....
    And you need to configure your router back all over again....
    No worries....I will guide you all through the process....
    Reason this thing happened  - someone push the Cisco System button at the front panel of your router...So the router wil automatically configure your wireless and set the security to WPA Personal...
    Before that - how bout you try to put in 10digits of your phone number in the passphrase box...
    Give it a try k.....
    Thank you...!!!

  • In the new Pages 5.0, what is the page break shortcut key. I cannot find the key as indicated on the drop down menu.

    in the new Pages 5.0, what is the page break shortcut key (it used to be the Fn + enter). I cannot find the (new) key as indicated on the drop down menu. Please help.

    Hi Bruce and fruhulda,
    ok, I found the keyboard viewer, it only shows the traditional symbol 'return'.  something like a sideway u-turn continued with the arrow under.  This is the Canadian or US keyboard. 
    btw thanks for your suggestion.

  • The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.

    H,
    Since upgrading Windows server 2008 R2 to Server 2012 Standard edition, we get this repetitious critical error in the event log:
    Event 1001
    Op Code NLS initialization
    The NLS operation failed because the registry key Control Panel\International\User Profile cannot be opened. Error code is 2. Error message: The system cannot find the file specified.
    We originally found that the regional date settings after changing them in regional settings (DD/MM/YYYY) and they did not inherit properly from the upgrade but they are ok now. 
    I've looked at HKCU\.Default\Control Panel\International and nothing looks obviously wrong. Country codes, time & date formats are correct.
    How do we ascertain the  cause of this error and the specific registry key that might be problematic?

    Hi,
    This could be caused by firewall rules or security softwares.
    http://www.tomshardware.com/forum/242579-44-hkcu-control-panel-international-opened
    And in addition, the fix is worth a try.
    Nothing happens when you double-click "Region" in Control Panel 
    http://support.microsoft.com/kb/2958845
    Please Note: Since the first web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.

  • I reformated my PC and lost my sync key and I have my iPhone connected to Sync but cannot find my sync key in the iPhone app

    I have lost my sync key because I reformatted my PC and didn't have a backup of it and my only other device connected to Sync is my iPhone but I cannot access the sync key in the Firefox Home app. I really wish I didn't have to erase all my sync data as I have some important passwords and bookmarks saved only in Sync.

    I did. Safari could not open the show sync key addon and Firefox Home didn't even try to load it for some reason.
    The second addon install button is grey when I try to open it with Firefox Home.
    Thank you, I appreciate the help but I guess unless there's a way to get the sync key for example via sftp from the iPhone (I have jailbroken) I'm pretty much doomed. I tried looking around the Firefox Home app folder but could not find the sync key in there. If someone knows where to look for the key it would be helpful, in case it isn't encrypted.

  • Omputcer has been installed with a German programme, originally programmed in English with English keyboard. The keys are the same as before but the keyboard is now programmed in German and I cannot find the way to enter @. How can I do it?

    My computer has been installed with a German programme, originally programmed in English with English keyboard. The keys are the same as before but the keyboard is now programmed in German and I cannot find the way to enter @. How can I do it?

    Hello r555,
    Thank you for being a My Best Buy member, and thank you for visiting our forum.  I am very sorry to hear that it has not always been easy for you to receive your Gamers Club Unlocked bonus when trading in games.  I'll be happy to talk to you about your experience.
    I get the impression you are quite familiar with the trade-in process and how the bonus is applied, and it is disappointing to hear that a store associate wouldn't attempt to complete that process.  I will be sending you a private message so we can get some more specific information regarding which store you were at as well as the trade in question where you did not receive the bonus.  Please watch for a message from me shortly.
    Sincerely,
    Mike|Social Media Specialist | Best Buy® Corporate
     Private Message

  • I purchased Adobe Acrobay XI with a fujistsu scanner.  I cannot find the cd it came with and I need a product key to download onto my new computer.  Please advise

    I purchased Adobe Acrobat XI with a fujistsu scanner.  I cannot find the cd it came with and I need a product key to download onto my new computer.  Please advise

    Hey Jacob,
    You might need to contact Adobe Customer Service to seek assistance for the same.
    Contact Customer Care
    Regards,
    Anubha

  • HT1491 I purchased a single and money has been taken from bank but cannot find the music

    I bought a single from iTunes store and money has come out of bank but cannot find the music

    Hi Tinab127,
    The file may have been moved or deleted. For this issue, we will need to refer to the following article:
    iTunes: Finding lost media and downloads
    http://support.apple.com/kb/TS1408
    Alternatively, I see your media was downloaded from the iTunes Store, you may be able to download it again free of charge:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    Thanks,
    Matt M.

  • I got a new wireless connection for my mac and cannot figure out how to delete the last connection service I had. Everytime I shut the computer, the network goes back to the other one. I cannot find the file ANYWHERE

    got a new wireless connection for my mac and cannot figure out how to delete the last connection service I had. Everytime I shut the computer, the network goes back to the other one. I cannot find the file ANYWHERE

    Under Network Preferences, select the WiFi
    click on "Advanced..." button
    Select the network you want to delete from the list and click on "-"
    Click "Ok"
    Click "Apply"
    Well done ;-)
    You may also want to delete the wireless key from Keychain.
    Open Keychain, seach for the old wifi network name, slect it and click delete

  • TS2570 Hi, MacBook Pro & Snow Leopard- startup probs. I have tried repairing with the disk utility, resetting PRAM, booting in safe mode, and finally trying to get to archive&install the o/s, but it cannot find the destination volume. IsAn erase the only

    (10.6.8 Intel core duo 2009)
    Hi,
    I have a grey screen and grey rotating wheel startup probs. I have tried repairing with the disk utility, resetting PRAM, booting in safe mode (which gave a subset of the errors that 'disk repair' did- namely- 'invalid sibling link,invalid record count, invalid node structure, invalid key length)  and finally trying to get to archive&install the o/s, but it cannot find the destination volume. Is an erase the only option? PS I have backed up most files individually, but my daughter did not back up any from her user account. Any help would be appreciated. J

    Gray, Blue or White screen at boot, w/spinner/progress bar
    Why is my computer slow?
    ..Step by Step to fix your Mac
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

  • The system cannot find the path specified.---- Error code:-2147467259 Error code name:failed

    Friends,
                I'm facing below issue while accessing a crystal report. I heard it might be an access issue. But i'm able to access a report within a same folder.
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException : The system cannot find the path specified.---- Error code:-2147467259 Error code name:failed
    at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
    Any suggestions would be very helpful.
    Thanks in Advance,
    Bharath

    Apply trace on RAS and look for errors in the RAS logs at the same timestamp.
    These errors come for various errors and tracing RAS would give us a better idea.
    It might hapen that you observe these errors for reports which takes more than the RAS timeout to export the reports.
    Post getting the RAS logs you can try below steps if we see timeout errors in RAS logs.
    Copy clientSDKOptions.xml file from <BO install path>\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\java\lib to the machine where your app is running Open clientSDKOptions.xml and change CORBARequestTimeOut from 600000 to a value large enough to allow the report to render, for instance 1200000. Default value is 600000 (10 minutes)
    Specify the location of the clientSDKOptions.xml file at run-time. In your JSP or Java files, use the Java method setProperty from the System class. Set the system property indicated by the ras.config key to the specified directory as: system.setProperty("ras.config","c:\temp"). This function call specifies that the clientSDKOptions.xml file in c:\temp is to be used for locating RAS servers.
    Thanks,
    Prithvi

  • Safari cannot find the server and question mark in blue square

    Hi
    I consistently have problems with safari displaying the message safari cannot find the server. The version I have is 5.1.8 and I installed a security update today (23.3.13) hoping it would solve the problem. After refreshing the page a couple of times or restarting safari everything works as normal but this is an ongoing issue. I also have problems with images loading on sites. They appear as blue squares with question marks. I have tried most things people have said on the net but nothing is working.
    Please help!
    Thanks

    HI aad1612,
    Try deleting the safari plist by foloowing these instructions:
    Close Safari
    Open a Finder window
    Click on "Go" in the upper status bar
    Click and HOLD the alt/option key (Library should appear in the above list)
    Keep holding the alt/otion key and click on Library (this will open a new window)
    Open the Preference folder (NOT Preference Panes)
    Look for com.apple.Safari.plist
    Right mouse client to move this file to trash
    Empty the trash
    Open Safari again and hopefully your issue will be reoslved.
    Good Luck

  • Cannot find the file MsDtsSrvr.ini.xml

    My SSIS 2008 book says that - 
    The MSDTSServer100 service is configured through an XML file that is located by default in the following path: C:\Program Files\Microsoft SQL Server\100\DTS\Binn\MsDtsSrvr.ini.xml. 
    I cannot find this file in the given folder. But, I did find a MsDtsSrvrUtil.dll file which is of no use to me. 
    The book also says that if you cannot find the path, go to the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\100\SSIS\ServiceConfigFile registry key in the Registry. By default, the XML file should look like the following: 
    < ?xml version=”1.0” encoding=”utf-8” ? >
    < DtsServiceConfiguration xmlns:xsd=”http://www.w3.org/2001/XMLSchema”
    xmlns:xsi=”http://www.w3.org/2001/XMLSchema-instance” >
    < StopExecutingPackagesOnShutdown > true < /StopExecutingPackagesOnShutdown >
    < TopLevelFolders >
    < Folder xsi:type=”SqlServerFolder” >
    < Name > MSDB < /Name >
    < ServerName > . < /ServerName >
    < /Folder >
    < Folder xsi:type=”FileSystemFolder” >
    < Name > File System < /Name >
    < StorePath > ..\Packages < /StorePath >
    < /Folder >
    < /TopLevelFolders >
    < /DtsServiceConfiguration >
    But, I don't see this either inside regedit. All i see is a blank "thing" (photo attached). What is happening and how do I complete these steps ? 

    Hello,
    Are you sure you have SSIS installed on your machine? Please check it with Windows Service Manager (services.msc) if you have an entry like "SQL Server Integration Services 10.0"
    BTW, the blank "\SSIS\ServiceConfigFile" registry key exists also on machines, where only the client tools are installed, but not SSIS itself.
    Olaf Helper
    [ Blog] [ Xing] [ MVP]
    Thanks for your answer. This is very embarrassing, I did find the xml file there. But, what is the difference between SSIS and SSIS client tools ?

  • Load report Failed, COMExpection: System cannot find the path specified

    Interesting problem:
    I have an application that runs on a web server (currently running it as simple test application to make solving this easier). We use a BO XI report to load data from the DB via a stored proc, then run an ExportToStream to get CSV data to return to the caller.
    It all works well as long as I run the application under the NT Account logged into the Box (W2k3, R2). But when using a different account (it's a domain admin account), it fails with the following error:
    System.Exception: Load report Failed. ---> System.Runtime.InteropServices.COMException (0x80004005): The system cannot find the path specified.
    at CrystalDecisions.ReportAppServer.ClienDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
    at CyrstalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod).
    The report is located on a file drive the openMethod is OpenReportByTempCopy. The Temp directory for the user (landes) exists on the box, all things seem to be in place.
    Anybody know that path is specified and how to overcome this?
    Thanks

    Will it be possible to check this registry key: HKEY_LOCAL_MACINE\SOFTWARE\Suite 11or11.5\Report Application Server\InprocServer\LocalConnectionMgr and verify if the ConnectionDirectoryPath is set to something like C:\ ?
    If not, set to C:\ and see how it goes after running your app.
    Cheers
    Alphonse

Maybe you are looking for

  • EXS samples in Project Folder...

    When I tell Logic to copy my samples to the project folder (using the Assets section of the Project Settings), is Logic still using the samples from their original location during playback, or is it now playing the files from my Project Folder? I'm h

  • Prem El 7: Previewing individual video tracks

    Hi All, I am new to Prem Elements 7 and have been spending a lot of time on my first project. Some simple things are holding me up and I can't resolve with the Help centre. I have 3 video tracks stacked in the timeline. A key problem is how to select

  • Boolean operators in the WHERE clause

    I'd like to create an operator which would allow me to use the following syntax in the where clause: select 1 from dual where iplike('172.16.0.128', '*.*.*.*'); I've created a function (iplike_bool_fn) to implement my desired check, and attempted to

  • Get_includes

    hi, i am in middle of an upgradation project and i am facing a problem in it. there is a statement in 4.6 c like ' get_includes lc_include lc_funname  lt_incl' . but it is giving syntax error in ecc 6.0. kindly suggest me what can be the alternative

  • Archivation of Request Administration Data

    Hello, I need to archive SAP BW administrative data (Archivation of Request Administration Data  ). Does anyone have practical experience with this? If yes ,please share with me. I have read SAP help and just need your guidance. Thanks a lot