Burn a DVD-R more than once

Does anyone know how I can burn a multisession using DVD-R?

This is how you do it for CD-R. I don't think it works for DVD but perhaps you could follow the same procedure as for CDs and see if it works.

Similar Messages

Impossibility to burn a DVD of more than one hour

My application consists to develop diaporamas of photos with imovie to take advantage of the potential of imovie compared to diaporamas using iphoto.
I have 7 diaporamas of 10 to 15 minutes each for a total of 78 minutes
A first step was to burn a subset of these diaporamas for my grand children, each of them of less than an hour ( 55 to 57 minutes ). That was done without any problem.
A second step was to burn a DVD of all diaporamas. I switched from best performance to best quality. Information on the projest was:
DVD capacity: 2,6Go
Menu; 1 first level ( aquarium2 )
Traks: 5
menus: 3
Duration: 77,36 minutes
Space available on the disc: 30,8Go
It seems that the first steps were processed properly. I saw the beginning of step2 ( menu and transitions ) and the beginning of the coding of the first sequence. When I came back the following morning ( I estimated a duration of the coding of about 4 hours ) the following message was displayed: " burning completed, erors were detected during the burning", but nothing was burned on the DVD ( virgin medium ? )
I also tried to make an image disc, with the same result. I have seen, working on a test DVD, that there is a step " multiplexing" before burning, and I suppose that the error occured during that step.
What do you think was wrong with my application. Thanks in advance for your help
Claude Finzi
I expect that you will understand my translation from french to english

To Beverly Maneatis:
Thanks for your answer dated 09/10. I did what was suggested in your message. To summarize, I have 8 slideshows1 to 8 ( I used the translation of the french word diaporama given by "Eurodicotom", an online free dictionnary of the European Commission, which, by the way, does not know the word "slideshow", nobody is perfect... ).
1- I burned: 1 2 3 5 7 56 minutes: no problem
2- I burned 5 6 7 8 57 minutes: no problem
3- I burned: 4 5 6 7 8 77 minutes: multiplexing error
4- I burned: 4* 20 minutes: no problem
* It seemed that the problem was due to slideshow 4 which was the only one not burned with problem
The slidehows dont seem corrupted...
Any other idea?

Recording a DVD-R more than once

Does anyone know how I can do a multisession recording on a DVD -R?

You can't, as the DVD-R format doesn't support this. If your drive is capable of writing to DVD+R disks, you can burn a multisession DVD+R with third-party software. The Disk Utility doesn't support burning multisession DVDs. To check if your drive supports DVD+R disks, open the Terminal in your /Applications/Utilities/ folder and type or paste in the following:
drutil info
All the types of disks supported by your drive will be listed in the output.
(8652)

Burning the same project more than once

Hi guys I have a project saved on dvdsp4 and was wondering if there is any faster way of burning extra copies?yesterday I burned the first copy and it took about 2hours because it had to render the menu etc.. I saved the project and today I want to burn extra copies but it has started to render the menu again.Is this normal?or is there a faster way burning copies once the project has been built?
thanks
Danny

It's easy to burn another copy of a DVD if you have already burnt a copy of it before. Just click the "Format" icon in the toolbar. It will pop up with a window with some options. You shouldn't have to change any of these options, just make sure that the Output Device is set to your DVD drive, which it should be set to by default. Just click the "Burn" button, pop in a DVD, and you're good to go.
If you've made a few changes to the DVD, you can use the "Build/Format" button in the toolbar. It will pop up with a window similar to that of the Format window. Click "Build & Burn." It will tell you that a VIDEO_TS directory already exists, and it can reuse as much of it as possible. You can then click "Reuse" to build the new portions of the DVD, and then it will burn it on a DVD.
Hope this helps.

Backups to same DVD more than once

I have just started to use PSE 7 and have moved all my photos into it. I did the initial backup to a DVD but now that I want to backup my new pictures, it seems to want a new DVD. I don't take all that many pictures so it would take me some months fill up a DVD. It doesn't seem to like DVD-R and with DVD-RW, it tells me there is something on the DVD and do I want to erase it. How do I use PSE7 to backup or copy pictures to the same DVD more than once? Thanks.

As far as I know, one can burn contents to a DVD only once...
If you’re using a DVD-RW you have to erase the old contents first...
On can burn a CD several times until filled up though...
You might consider using an external Firewire Hard-drive for your backup...?
Regards
Nolan
PS:
Please check this one out...
http://freeridecoding.com/burnagainfs/
(guess, "Windows" offers something similar...)

Getting the same text more than once

I keep getting the same numerous texts more than once from my friends and one of my friends even said that they were getting my texts out of order. Is it my phone or the network?

It's easy to burn another copy of a DVD if you have already burnt a copy of it before. Just click the "Format" icon in the toolbar. It will pop up with a window with some options. You shouldn't have to change any of these options, just make sure that the Output Device is set to your DVD drive, which it should be set to by default. Just click the "Burn" button, pop in a DVD, and you're good to go.
If you've made a few changes to the DVD, you can use the "Build/Format" button in the toolbar. It will pop up with a window similar to that of the Format window. Click "Build & Burn." It will tell you that a VIDEO_TS directory already exists, and it can reuse as much of it as possible. You can then click "Reuse" to build the new portions of the DVD, and then it will burn it on a DVD.
Hope this helps.

Since I updated to iCloud, Mail on my MacBookPro 10.6.8 has been unable to connect to MobileMe more than once or twice per day. Mail on my iPhone 4 has no problems. What's wrong?

Since I updated to iCloud, (which may or may not be related) Mail on my MacBookPro 10.6.8 has been unable to connect to MobileMe more than once or twice per day. Mail on my iPhone 4 and my old iMac has no problems. When there is no service a yellow warning triangle appears adjacent to the Inbox and Connection Doctor reports,"Trying to log into this MobileMe IMAP account failed. Verify that username and password are correct." Since it does fetch Mail from time to time they cannot be wrong.... can they? Should I update to 10.7 and if so what does that entail?

You have been using MobileMe's email settings, which sometimes continue to work for a time after migration but then get turned off. iCloud's mail server settings are different. Strictly speaking Lion 10.7.2 is required for iCloud, and on that Mail is set up automatically.
Snow Leopard cannot access most of iCloud's facilities, however you can set Mail up manually to access your email. The method is described here:
http://www.wilmut.webspace.virginmedia.com/notes/icloudmail.html
The situation with iCloud and Snow Leopard is described in detail here:
http://www.wilmut.webspace.virginmedia.com/notes/icloudSL.html

How do I repeat the same row more than once in report 10g

How do I repeat the same row more than once in report 10g
So I can print the bar code more than once
in report;
Edited by: user11106555 on May 9, 2009 5:50 AM

GREAT THAN X MAN
It is already working, but with the first ROW
select ename from emp
CONNECT BY ROWNUM<=5
ENAME
SMITH
SMITH
SMITH
SMITH
SMITH
ALLEN
WARD
JONES
MARTIN
BLAKE
CLARK
SCOTT
KING
TURNER
ADAMS
JAMES
FORD
MILLER
BUT I want this result
Item1
Item2
Item3
to
Item1
Item1
Item1
Item2
Item2
Item2
Item3
Item3
Item3

Can you create a form in which its never possible for the same person te sign the form more than once.

Hi, I've been looking into this for awhile and believe the answer is 'no' but was just wondering if anyone here would know of a solution.
The company I work for has a formulier on which a number of Excel files are placed. This form is then sent to a five (often different) people who are then required to open the Excel files and if accord to place their digital signature. We would like to make sure that no one is able to sign the form more than once and also if possible to make sure they have opened the Excel files. It would be great if anyone had any tips...
All the very best,
Martin Angell

I am not an Excel or Excel-to-PDF conversion expert, so I do not know how Excel forms are converted to PDF form fields. With this caveat here's what I do know.
In Acrobat It is possible to create a PDF form in which there are JavaScripts associated with fields (any fields, including signature fields). These JavaSripts can do a lot of things, including checking the signer's certificates on the already signed signature fields. Then you can make all unsigned signature fields read-only, in which case the user will not be able to actually sign them. After that you can overlay a button field on top of each unsigned signature field with exactly the same dimensions and associate a JavaAcript with this button field. This JavaScript would put up an UI asking the user for the signing certificate and its password, check this certificate's CN against the list of already signed signature fields and initiate the signing of the unsigned signature field behind this button if your condition is satisfied.
I never tried that myself but it could work. This looks complicated and it is but if you really want it you can try.

Deauthorizing all machines more than once in a year?

Is it possible to deauthorize all machines more than once in a year? I have had two machines crash and one time I forgot to de-authorize before I installed a new OS.
iTunes tells me I have to wait until June to do this. There has to be a way to manually get someone to agree to do this. Is there a number I can call or process????
tflink
HP Compaq NC8230 Windows XP Pro

No.

Performance... Why a function column in a view is executed more than once...?

Why a function column created inside a view is executed more than once when called more than once?
EXAMPLE:
create or replace view aux1 as
date_column,
any_function(date_column) column1
from any_table
create or replace view aux2 as
column1 c1,
column1 c2,
column1 c3
from aux1
select * from aux2
It will execute 3 times the function any_function... logically the value will be the same for all columns...
I understand why!... are 3 calls... but...
Why not to create a "small" verification and if the function column was execute replace the second, the third... value? ... instead of execute 3, 4... times...
tks
Braga

Actually, this is more than a performance issue. This is a consistency problem. If the function is NOT deterministic then you may get different values for each call which is clearly not consistent with selecting 3 copies of the same column from a row. Oracle appears to have fixed this in 9i...
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.2.0 - Production
With the Partitioning option
JServer Release 8.1.7.2.0 - Production
create view v1 as select dbms_random.value(1,100) r from dual;
create view v2 as select r r1, r r2 from v1;
select * from v2;
          R1           R2
          93           74
Connected to:
Oracle9i Enterprise Edition Release 9.0.1.3.0 - Production
With the Partitioning option
JServer Release 9.0.1.3.0 - Production
create view v1 as select dbms_random.value(1,100) r from dual;
create view v2 as select r r1, r r2 from v1;
select * from v2;
          R1           R2
          78           78Richard

Why would aperture load more than once?

I understand that when I first load my RAW photos into Aperture it needs to generate a preview and so that's why it slows down and shows me "loading...". If I want to bypass this I can use quick preview mode. That's how I understood it so far. But I don't understand why it would need to load again at a later time? If I browse elsewhere and come back to this project, it'll start loading again. Does Aperture for some reason deletes the preview?

1) How do I force aperture to generate preview for everything, and not one by one. I'd rather go away and let the computer do its thing for a while than get disturbed every time I hop to the next photo.
You can select all images in the Browser and use the command "Photos > Update/Generate Previews" (Update will turn into "Generate", if hold down the ⌥ alt/options key). This way you can generate the previews over night.
2) Also this still doesn't explain why it needs to be done more than once? Why would it generate the preview again if I haven't changed any adjustments etc?
It will only keep and store the preview permanently, if you have enabled the sharing of previews in the "Preferences > Preview" tab. If you do not enable this, Aperture will not store the previews, to save space.

Button/click box click more than once

Hi, I'm hoping you guys can point out what I'm doing wrong...
I have an image where the user can click on certain parts of
it to display a callout. However, I want them to be able to click
on the area of the image more than once if requried. I suppose you
can say it's a bit like an image map.
First I used click boxes to achieve this, then I tried using
transparent buttons. However for both of these methods you can only
click on each part once during playback. Clicking again does not
show the callout.
I thought about copying the contents to another slide and add
a 'Reset' button the user could click on. This would move to the
other slide, but this seems a bit on the 'clunky' side, so I
thought there must be a setting or something really obvious that I
have missed. I was unable to find the relevant informaiton in the
help file or elsewhere in the forum, so if it does exist I would
appreciate someone pointing me in the right direction.
How can I allow the user to click on parts of the image more
than once to show the callout?
Thanks for your help,
Liz

Thanks for your reply Rick.
I started the activity using rollovers, but I wanted the user
to do something more definite than just hovering over each part of
the image. So essentially, I want the rollover functionality but
with the ability to click instead of just hovering the cursor over.
I thought this would be easy!
I've tried using both buttons and click boxes without any
success. I ventured a little into slidelets, but I want the callout
to appear in a very specific place and this did not appear to
satisfy my requirements. The 'click to stick' sounds intriguing so
I'll take a look into this, but I'm not convinced it's what I want.
Any more suggestions are most welcome.
Regards
Liz

Terminating Event Getting triggered more than once

Hi All,
I am facing a very peculiar problem in PR release workflow(item wise release, business object BUS2009).
One of the requirements of the workflow is to send a mail to PR initiator once it is rejected by any of the approvers(4, in my case). The event associated with the cancellation of the workflow is REJECTION_START.
The problem is that this event is being triggered more than once. One thing that i have observed is that if eg. second level of approver cancels it, the event is triggered twice. Likewise if third level of approver cancels it, it is being triggered thrice. Which leads to sending of 2 and 3 mails respectively to the PR initiators mailbox.
Why is this happening? Ideally, only one event should have been triggered, and the triggering of the event should have been independent of PR approver's level. I am at my wits end regarding this.
Any suggestions in this regard will be highly appreciated
Regards
Varsha Agarwal.

If you check for 2nd level rejjection two release Code is associated so it triggers 2 times and same for 3rd level approval.
I think you have to put some sort of filter using FM SAP_WAPI_WORKITEM_OBJECT
in the attribute portion of yopur custom BO.
The attribjute will check this FM and if it has entries that means already a Workflow has been triggered it should set the flag as X.
Make use of this attribute in defining the start condition of this task thru
SWB_COND.
Thanks
Arghadip

Weblogic.management.server bound more than once?

Sorry if I already posted this in cluster, but I realized that it should belong here instead....
I have an admin server that does not belong in any cluster. I set up 2 managed server (app01,
app02) targetted to "app cluster". I can start up app01 or app02 by itself, when when I start both
up, I get the following message on both managed servers; the admin server, on the other hand, does
not display any errors. Why are the managed servers trying to bind weblogic.management.server to
jndi????
<Apr 3, 2001 11:07:37 AM PDT> <Info> <Cluster> <Adding
server -4094822875006454559S:fortran-1:[10085,10085,7002,7002,10085,7002,-1] to cluster view>
<Apr 3, 2001 11:07:37 AM PDT> <Info> <Cluster>
<Adding -4094822875006454559S:fortran-1:[10085,10085,7002,7002,10085,7002,-1] to the cluster>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.server in the jndi tree. The object you have bound
weblogic.management.internal.RemoteMBeanServerImpl from fortran is non clusterable and you have
tried to bind more than once from two or more servers. Such objects can only deployed from one
server.>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.server in the jndi tree. The object you have bound
weblogic.management.internal.RemoteMBeanServerImpl_WLStub from fortran-1 is non clusterable and you
have tried to bind more than once from two or more servers. Such objects can only deployed from one
server.>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.adminhome in the jndi tree. The object you have bound
weblogic.management.internal.AdminMBeanHomeImpl from fortran is non clusterable and you have tried
to bind more than once from two or more servers. Such objects can only deployed from one server.>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.adminhome in the jndi tree. The object you have bound
weblogic.management.internal.AdminMBeanHomeImpl_WLStub from fortran-1 is non clusterable and you
have tried to bind more than once from two or more servers. Such objects can only deployed from one
server.>
Gene

Prasad diagnosed the problem. Look in clustering under the same title if you're interested!
Gene
"Gene Chuang" <[email protected]> wrote in message news:[email protected]...
Sorry if I already posted this in cluster, but I realized that it should belong here instead....
I have an admin server that does not belong in any cluster. I set up 2 managed server (app01,
app02) targetted to "app cluster". I can start up app01 or app02 by itself, when when I startboth
up, I get the following message on both managed servers; the admin server, on the other hand,does
not display any errors. Why are the managed servers trying to bind weblogic.management.server to
jndi????
<Apr 3, 2001 11:07:37 AM PDT> <Info> <Cluster> <Adding
server -4094822875006454559S:fortran-1:[10085,10085,7002,7002,10085,7002,-1] to cluster view>
<Apr 3, 2001 11:07:37 AM PDT> <Info> <Cluster>
<Adding -4094822875006454559S:fortran-1:[10085,10085,7002,7002,10085,7002,-1] to the cluster>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.server in the jndi tree. The object you have bound
weblogic.management.internal.RemoteMBeanServerImpl from fortran is non clusterable and you have
tried to bind more than once from two or more servers. Such objects can only deployed from one
server.>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.server in the jndi tree. The object you have bound
weblogic.management.internal.RemoteMBeanServerImpl_WLStub from fortran-1 is non clusterable andyou
have tried to bind more than once from two or more servers. Such objects can only deployed fromone
server.>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.adminhome in the jndi tree. The object you have bound
weblogic.management.internal.AdminMBeanHomeImpl from fortran is non clusterable and you have tried
to bind more than once from two or more servers. Such objects can only deployed from one server.>
<Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
the name weblogic.management.adminhome in the jndi tree. The object you have bound
weblogic.management.internal.AdminMBeanHomeImpl_WLStub from fortran-1 is non clusterable and you
have tried to bind more than once from two or more servers. Such objects can only deployed fromone
server.>
Gene

Burn a DVD-R more than once

Similar Messages

Maybe you are looking for