Burn Cancelled, Story must contain entry???

I tried to burn my DVD, and it says the burn was unsuccessful because "Story 1: Stories must contain at least one entry." I go to the story tab at the bottom, but can't seem to alter this "story" or delete it. What do I have to do in order for this to burn? Thanks.

If you didn't intend to have any stories, look in the Outline view list, and expand each track until you see the one that has the story attached, and select and delete it there.

Similar Messages

Problem: Stories must contain at least one entry

Hello, I have the following problem:
When I want to build/format a DVD project the following error message appear:
Starting DVD Build RV_MOVIES...
Compiler Initializing...
Precompiling Project RV_MOVIES
Parsing Assets...
Story 1:Stories must contain at least one entry
What do I need to do succeed burning the disc? How do I make an entry in the story? How do I delete a story if it is unnecessary?
Thanks for a good forum!

Take a look here
http://dvdstepbystep.com/stories_details.php
A story needs at least one marker, if not you will get that message, To delete the story highligh it in outline view and press delete key (takee a look at the last picture in that link, it shows the English Play All Story being highlighted)

Burn CD: must contain at least one track-error

In Waveburner, when I click burn CD I get an error: "A project must contain at least one track"
I selected 8 tracks in my saved project and clicked Burn CD. I did the same unselected.
I get the same error every time. Why?
W.W.

Thank you kcstudio for responding.
In the meantime I figured out why I was getting this error. Although I don't understand why I even got this.
The existing 8 tracks I imported with Import from the desktop into this WaveBurner project. Working in Regions tab all the time I did not realize that when I switched to the CD tracks tab there was nothing there. No regions and title list. So I made a new project and imported the audio files again making sure the CD tracks tab was selected refore. After that regions and listings were there both in regiones and CD tracks tab. I think Import
should have taken care of that. I don't get it why there was nothing when I clicked the CD track tab.
W.W.

ERROR ITMS-9000: "META-INF/container.xml must contain one and only one root file reference."

Hi all,
After correcting a table-of-contents error in my .epub file, I am unable to upload it via iTunes Producer. It lists this error message:
ERROR ITMS-9000: "META-INF/container.xml in 9780615431727.epub must contain one and only one root file reference." at Book (MZItmspBookPackage)
The file has been verified and only has one root file reference in the container.xml file.
Has anyone been able to find a solution to this problem?
Thanks!

Hello Forum Users…
For those of you who have run into the upload roadblock, getting an error message similar to this:
Package Summary:
1 package(s) were not uploaded because they had problems:
          /Users/slm/Desktop/MUSIC to PICTURE for IBOOK/2012 MTP for iTUNES Bookstore/9780615600918.itmsp - Error Messages:
                    Apple's web service operation was not successful
                    Unable to authenticate the package: 9780615600918.itmsp
                    ERROR ITMS-9000: "OPS/ibooks.ncx(5): 'p50': fragment identifier is not defined in 'OPS/content9.xhtml'" at Book (MZItmspBookPackage)
Following is a "specific" fix, but the idea of the fix will help you with your specifics too.
I tried for 17 days to upload a book that looked and worked perfectly in iPAD via Preview.
After many discussions with Apple, who to their credit stayed with me over 2-3 days, I decided to play a hunch.
I went into a duplicated copy of the book and on every page, (because the error message was not telling the whole story), looked for what InDesign would call "Overset Text."
Now... the "flaw" in iBOOK Author (hint) is that it won't advise you of this "overset text" as does InDesign.
And to compound the matter, the exported ePUB document WORKS in iPAD Preview.
See Screenshots from InDesign:
Okay... Couldn't add it but it is a Warning Box that says there is overset text. (Characters which exceed the text box.)
Nevertheless, I played this hunch, and sure enough found a few boxes with the + in them. In other words I clicked on EVERY text holder and every text block in the entire document.
Where I found + signs, I simply deleted some carriage returns from the iBOOK file... (please note… carriage returns and literally empty spaces that caused the overset text) and then erased all previous copies of the Music to Picture Book on my hard drive, iTUNES and iPAD.
The result? A "text-book" upload with no snags! As my Son would say… "Victory!"
So, first make sure that you are using only PNGs, Jpegs and Movie files to iBook Specs. Then... make sure there are no overset text boxes, which you must do manually.
Enjoy & Godspeed!
Steve
Stephen Melillo, Composer
STORMWORKS®
209 Spinnaker Run
Smithfield, VA 23430-5623
USA
v/f 757-356-1928
stormworld.com
“History is a vast early warning system.” Norman Cousins, editor and author (1915-1990)
"This will be our reply to violence: to make music more intensely, more beautifully, more devotedly than ever before." Leonard Bernstein
“If you have a chance to help someone, and you don’t, you are wasting your time on this earth.” Roberto Clemente

Wuc-15 form must contain the following bean

hi
i am trying to use the client_text_io api's in a form but i keep getting the wuc-15 error (your form must contain the following bean for this function to be available - oracle.forms.webutil.file.FileFunctions). i do have the webutil object group in the form, i added it after attaching the library but i did go back and recompile all the pl/sql code just in case. forms90_path does include webutil/forms.
the only thing that i can see that might be a problem is that because of utf8 issues i have to use the sun jdk. i have the following block in my formsweb.cfg file to force the form to use the sun jdk instead of jinitiator
[jdk_plugin]
basehtmljinitiator=basejpi.htm
basehtmlie=basejpi.htm
baseHTMLjpi=basejpi.htm
jpi_download_page=http://java.sun.com/j2se/1.4.2/download.html
jpi_classid=clsid:CAFEEFAC-0014-0002-0004-ABCDEFFEDCBA
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-142-windows-i586.cab#Version=1,4,2,0
jpi_mimetype=application/x-java-applet;version=1.4.2
i have left it this way since when i change the basehtml entries to use the webutil templates i get thrown back into jinitiator. is this causing the wuc-15 error? if it is how do i use the webutil templates with the sun jdk?
thanks
penny svetlik

the forms90_path variable contains less than 100 characters.
i ran the form with increased trace level but did not get anything additional in the way of errors (just the usual 'unable to attach library' error in the alert box). here is the trace information. by the way why do the findlocalhost and getipaddress calles repeat 8 times?
Registered modality listener
Registered modality listener
Referencing classloader: sun.plugin.ClassLoaderInfo@17431b9, refcount=1
Referencing classloader: sun.plugin.ClassLoaderInfo@12884e0, refcount=1
Loading applet ...
Initializing applet ...
Starting applet ...
Loading applet ...
Initializing applet ...
Starting applet ...
Connecting http://epn-svetlikp-3.nci.nih.gov:8888/forms90/webutil/webutil.jar with no proxy
Connecting http://epn-svetlikp-3.nci.nih.gov:8888/forms90/java/f90all.jar with no proxy
Loading http://epn-svetlikp-3.nci.nih.gov:8888/forms90/java/f90all.jar from cache
Loading http://epn-svetlikp-3.nci.nih.gov:8888/forms90/webutil/webutil.jar from cache
Certificates for http://epn-svetlikp-3.nci.nih.gov:8888/forms90/webutil/webutil.jar is read from JAR cache
Certificates for http://epn-svetlikp-3.nci.nih.gov:8888/forms90/java/f90all.jar is read from JAR cache
Modality pushed
Modality pushed
Modality popped
Modality popped
User selected: 0
RegisterWebUtil - Loading Webutil Version 1.0.2 Beta
Loaded image: jar:http://epn-svetlikp-3.nci.nih.gov:8888/forms90/java/f90all.jar!/oracle/forms/icons/splash.gif
Loaded image: jar:http://epn-svetlikp-3.nci.nih.gov:8888/forms90/java/f90all.jar!/oracle/forms/icons/oracle_logo.gif
Loaded image: jar:http://epn-svetlikp-3.nci.nih.gov:8888/forms90/java/f90all.jar!/oracle/forms/icons/bgnd.gif
Connecting http://epn-svetlikp-3.nci.nih.gov:8888/forms90/java/oracle/forms/registry/Registry.dat with no proxy
Connecting http://epn-svetlikp-3.nci.nih.gov:8888/forms90/java/oracle/forms/registry/default.dat with no proxy
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Connecting http://epn-svetlikp-3.nci.nih.gov:8888/forms90/f90servlet?config=jdk_plugin&form=C:\OraHome1\forms90\webutil\Webutil_demo\WU_TEST.fmx&buffer_records=NO&debug_messages=NO&array=YES&query_only=NO&quiet=NO&RENDER=YES&acceptLanguage=en-us,en;q=0.5&ifcmd=startsession with no proxy
Connecting http://epn-svetlikp-3.nci.nih.gov:8888/forms90/l90servlet;jsessionid=7de1dca002db47ac915d9a2dfdbf1eae?ifcmd=getinfo&ifhost=epn-svetlikp-3&ifip=156.40.35.44 with no proxy
Connecting http://epn-svetlikp-3.nci.nih.gov:8888/forms90/l90servlet;jsessionid=7de1dca002db47ac915d9a2dfdbf1eae with no proxy
Forms Applet version is : 902122
Connecting http://epn-svetlikp-3.nci.nih.gov:8888/forms90/l90servlet;jsessionid=7de1dca002db47ac915d9a2dfdbf1eae with no proxy
Loaded image: jar:http://epn-svetlikp-3.nci.nih.gov:8888/forms90/java/f90all.jar!/oracle/forms/icons/frame.gif
2004-Apr-08 08:43:50.544 WUI[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-Apr-08 08:43:50.604 WUI[VBeanCommon.getIPAddress()] 156.40.35.44
2004-Apr-08 08:43:50.654 WUF[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-Apr-08 08:43:50.684 WUF[VBeanCommon.getIPAddress()] 156.40.35.44
2004-Apr-08 08:43:50.724 WUH[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-Apr-08 08:43:50.764 WUH[VBeanCommon.getIPAddress()] 156.40.35.44
2004-Apr-08 08:43:50.784 WUS[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-Apr-08 08:43:50.804 WUS[VBeanCommon.getIPAddress()] 156.40.35.44
2004-Apr-08 08:43:50.835 WUT[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-Apr-08 08:43:50.855 WUT[VBeanCommon.getIPAddress()] 156.40.35.44
Connecting http://epn-svetlikp-3.nci.nih.gov:8888/forms90/webutil/jacob.jar with no proxy
Loading http://epn-svetlikp-3.nci.nih.gov:8888/forms90/webutil/jacob.jar from cache
Certificates for http://epn-svetlikp-3.nci.nih.gov:8888/forms90/webutil/jacob.jar is read from JAR cache
2004-Apr-08 08:43:51.415 WUO[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-Apr-08 08:43:51.435 WUO[VBeanCommon.getIPAddress()] 156.40.35.44
2004-Apr-08 08:43:51.495 WUL[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-Apr-08 08:43:51.505 WUL[VBeanCommon.getIPAddress()] 156.40.35.44
2004-Apr-08 08:43:51.536 WUB[VBeanCommon.findLocalHost()] obtaining LocalHost info from InetAddress
2004-Apr-08 08:43:51.556 WUB[VBeanCommon.getIPAddress()] 156.40.35.44
Connecting http://epn-svetlikp-3.nci.nih.gov:8888/forms90/java/oracle/ewt/alert/resource/AlertBundle_en_US.class with no proxy
Connecting http://epn-svetlikp-3.nci.nih.gov:8888/forms90/java/oracle/ewt/alert/resource/AlertBundle_en_US.properties with no proxy
Connecting http://epn-svetlikp-3.nci.nih.gov:8888/forms90/l90servlet;jsessionid=7de1dca002db47ac915d9a2dfdbf1eae with no proxy
Connecting http://epn-svetlikp-3.nci.nih.gov:8888/forms90/l90servlet;jsessionid=7de1dca002db47ac915d9a2dfdbf1eae with no proxy
2004-Apr-08 08:43:54.630 WUI[VBeanCommon.destroy()] WebUtil GetClientInfo Utility being removed..
2004-Apr-08 08:43:54.640 WUF[VBeanCommon.destroy()] WebUtil Client Side File Functions being removed..
2004-Apr-08 08:43:54.660 WUH[VBeanCommon.destroy()] WebUtil Client Side Host Commands being removed..
2004-Apr-08 08:43:54.680 WUS[VBeanCommon.destroy()] WebUtil Session Monitoring Facilities being removed..
2004-Apr-08 08:43:54.700 WUT[VBeanCommon.destroy()] WebUtil File Transfer Bean being removed..
2004-Apr-08 08:43:54.720 WUO[VBeanCommon.destroy()] WebUtil Client Side Ole Functions being removed..
2004-Apr-08 08:43:54.730 WUL[VBeanCommon.destroy()] WebUtil C API Functions being removed..
2004-Apr-08 08:43:55.381 WUB[VBeanCommon.destroy()] WebUtil Browser Functions being removed..
Connecting http://epn-svetlikp-3.nci.nih.gov:8888/forms90/l90servlet;jsessionid=7de1dca002db47ac915d9a2dfdbf1eae with no proxy

PeopleSoft 8.49 "URL Must Contain domain"

Hello All,
First of all, thank you for reading this subject.
I have to migrate servers from an Active Directory to Another.
on the Active Direcoty, i've got few R&D PS servers.
my job is not to know how works PeopleSoft but migrate it.
So I have no competency on this product.
i have make a migration test and since the migration, each time I connect to PS I've got the following message:
URL must contain MyOldDomainName
I browsed the forum and found a lot of informations:
Your URL must contain domain ".peoplesoft.com
Issue with PeopleSoft Sign-on url....not able to get the signon page
But the problem still exist.
this is the configuration:
- PeopleSoft Enterprise 8.49
- Weblogic Server 9.2
- MS SQL 2005
- Windows 2003 server
i have first edit a lot of files:
When I edit the host file, I'm able to connect if I enter the old URL with the old Windonws domain name.
in a file config_prop
D:\PT8.49\webserv\peoplesoft\applications\peoplesoft\PORTAL\WEB-INF\psftdocs\ps\webprof\config_prop
i have replaced all occurences to my old Windows Domaine by the new one.
I have done the same with the following option_prop file:
D:\PT8.49\webserv\peoplesoft\applications\peoplesoft\PORTAL\WEB-INF\psftdocs\ps\webprof\option_prop
i have deleted the cache portal:
D:\PT8.49\webserv\peoplesoft\applications\peoplesoft\PORTAL\ps\cache
and replace all occurences of my old windows domain name in the database by the new one.
When I restart PeopleSoft, my file config_prop and my database are updated by I don't know what, and the problem still exist.
I'm clearly lost and I don't know where to search.
So, I send an SOS!
Thank you in advance for your help.
best regards,
Vincent.

Hi,
The authentication domain is set in the webprofile.
The webprofile can be found in file configuration.properties, to be found in [PS_HOME]\webserv\peoplesoft\applications\peoplesoft\PORTAL.war\WEB-INF\psftdocs\[site] and contains an entry like
# The next three fields must be valid for the database referred to in psserver.
# WebProfile is the name of the profile used to configure this web site.
# The user id and password are the values used to get the profile.
# NOTE: If you change the password of this user in the database then
# run the PSCipher script with the new password and paste the encrypted output here.
# The pre-delivered profiles are: DEV, TEST, PROD, and KIOSK
# DEV has standard developer options set
# TEST has standard testing options set
# PROD has standard production options set
# KIOSK is like PROD but has additional settings relevant to KIOSK usage
## sd="Web Profile", dt="dx", ld="The web profile is a named group of configuration property settings that the portal applies throughout your PeopleSoft system to control all portal-related behavior.", tip="This may be set to DEV, TEST, PROD or KIOSK. Additional web profiles may be delivered and created for your application"
## option(va = DEV, sd="Standard developer option set")
## option(va = TEST, sd="Standard testing option set")
## option(va = PROD, sd="Standard production option set")
## option(va = KIOSK, sd="Similar to Production but has Kiosk option set")
WebProfile=PROD
This webprofile has an authentication domain set in the database.
You can start by trying to set the webprofile to another (which might not have an authentication domain set) (DEV ,TEST, PROD, KIOSK )
Bounce the webserver and after this you should be able to login to PeopleSoft (without an domain (http://server:port/ps/signon.html)) and change the authentication domain on the original webprofile to the new domain name.

How can I cancel (Storno) a Journal Entry?

Hi,
I need to cancel (storno) a journal entry by code.
I cant use the '.Cancel' method of 'SAPbobsCOM.JournalEntries' class.
If I make a new journal entry with opposite values is the same?
Can anybody help me please?
Regards

Thanks,
This was the answer in SMB Portal:
Hello Ricardo,
it is not possible to cancel a journal entry once it has been created, n
or with SDK neither with the client application.
If you want to reverse the journal entry, you must enter a new one with
opposite values as you mention above.
Now we already Know

CD burner cancelling burn

I have the Apple CD/DVD external burner.
Yesterday, it would start to burn an iTunes playlist, then would "cancel the burn."
I figured the problem was with the burner, so after consulting with this community, purchased a different, LG DVD writer.
Plugged it in, put in a disc, got the same result as with the Apple superdrive burner.
Can the problem be with the computer?
Desperately need this to work; am an elementary music teacher and needed to burn a compilation CD for St. Patrick's Day music....which is tomorrow!

Hey iteachmusic,
The articles below provide some things to try if you are unable to burn a playlist to a CD in iTunes. Since the issue is happening with two different drives, have you tested to see if you can burn a data disc from the Finder application to test the drive? Also, have you tried a different brand? Are you using CD-R discs?
OS X Yosemite: Burn CDs and DVDs
https://support.apple.com/kb/PH19009?locale=en_US&viewlocale=en_US
Burn a CD or DVD in the Finder
Insert a blank disc into the optical drive.
If you see a dialog, click the pop-up menu, then choose Open Finder. Select “Make this action the default” if you want to open the Finder every time you insert a blank disc.
The disc appears on your desktop.
Double-click the disc to open its window, then drag the files and folders you want to burn to the window.
Choose File > Burn [disc], then follow the instructions.
Disc Burning Quick Assist - Apple Support
https://support.apple.com/en-us/ht1152
You're unable to burn a CD in iTunes
https://support.apple.com/kb/TA44597?locale=en_US
Check iTunes settings
If you have set the Gap Between Songs to 5 seconds in iTunes preferences, try setting it to something shorter, such as 2 seconds.
Make sure you've chosen the correct disc format for the files you're trying to burn to your CD or DVD. To create an audio CD, you need to choose Audio CD in the Burning pane of iTunes preferences. To create a CD with any type of audio file that iTunes supports (MP3, AAC, AIFF, and so on), you need to choose "Data CD or DVD" in the Burning pane of iTunes preferences.
Songs that aren't selected are not burned to a disc and are dimmed during a burn. If none of the songs in a playlist are selected, you will see the alert "None of these items in this list can be burned to CD."
Set the burn speed in iTunes to 2x:
From the iTunes menu (Mac OS X) or Edit menu (Mac OS 9), choose Preferences.
iTunes 5: Click the Advanced tab and then click the Burning tab. iTunes 3 and 4: Click the Burning tab.
Choose 2x from the Preferred Speed pop-up menu. If the burn is successful, keep trying a faster burn speed until you are unable to burn successfully, then set the burn speed to the last successful speed.
Other things to check
If your playlist includes songs that were purchased from the iTunes Store (iTunes 4 only), you can only burn 7 copies of the same playlist to an audio CD. If you can't burn a CD that contains purchased songs, make sure you haven't tried to burn the same playlist 7 times. Additionally, if the song has not been authorized to play on the computer, it will not burn.
Have a good day,
- Judy

Error while editing Workflow Task List Item - "Sorry, something went wrong.. Web must contain a discussion list

I have an custom approval workflow and when I try to edit an assigned approval Task it throws me an error
Sorry, something went wrong
Web must contain a discussion list
Any help appreciated!
Pravs

Hi,
For a better troubleshooting, I suggest you do as the followings:
1. Check the ULS log for more detailed error message, for SharePoint 2013, the ULS log is located at the path:
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
You can use ULS Log Viewer to check the information in the log.
2. You can use fiddler to track if there is something wrong in the workflow request.
Here are some detailed articles about debugging workflow:
https://msdn.microsoft.com/en-us/library/office/dn508412.aspx
https://sharepointlogviewer.codeplex.com/
Thanks
Best Regards
Jerry Guo
TechNet Community Support

Data DVD burn cancels

I have tried repeatedly to burn a back-up data DVD of a playlist. The burn cancels in the first song. I have culled through the playlist and removed anything purchased online or shifted over from another desktop on the same computer. None of the songs are from the iTunes store; all have been uploaded from CDs and are listed as MPEG audio files. I am not concerned about preserving playlists, etc. just want to back up the songs. The ultimate goal is to transfer the library to a new Mac (don't have it yet).
My knowledge is basic, so please use simplistic language in any responses!
Thank you.

Can you burn from the Finder?
MJ

List must contain AbstractList (ProxyList) of Type {0}, not of {1}!

Hi All,
I am getting this exception
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCException: List must contain AbstractList (ProxyList) of Type , not of !
Plz help.
Regards
Nikhil Bansal

hi,
this is because , passing table to BAPI is different than just binding structure to the model node.
For structure we would have simply bound them as
<model class name>.set<Structure name>(structure element);
but, for passing table we need to create the abstract list for the table node, like as,
Bapiparnr.Bapiparnr_List PartnerList = new Bapiparnr.Bapiparnr_List();
Partner.setPartn_Numb(PartnerNumber);
Partner.setPartn_Role("AG");
PartnerList.addBapiparnr(Partner);
SO.setOrder_Partners(PartnerList);
// check out this List structure creation and use Partner is element of table node
//this first need to added to PartnerLIst which is abstract list structure for table
//node , then added this to model class node in the last step
hope it helps
regards

Air iOS - To use TestFlight Beta Testing, build 1.0.0 must contain the correct beta entitlement.

Hi,
I published my iOS app and uploaded it to iTunes Connect to run an external beta test through Apple TestFlight but I got this error:
To use TestFlight Beta Testing, build 1.0.0 must contain the correct beta entitlement.
I created my certificate 3 days ago and it contains the beta entitlement.
I published the iOS app with the latest Flash CC 2014 version on a Mac with Air 15.
How to fix that error?
Thanks

I'm using flasProfesionnalcc 2014, using Air SDK 16... I have the same problem.
>In summary... I am using Air SDK 16.0 and added the following to my app xml file:
<Entitlements>
<![CDATA[ <key>get-task-allow</key>
<false/>
<key>beta-reports-active</key>
<true/> ]]>
</Entitlements>
But when I try to insert the <Entilements> code into de xml file I receive a error when a try to complile:
Error application.Entilemens is a unexpected element/atribute
How to fix that error?
Thanks

The source folder must contain a valid boot.wim file

Hi.
I have the following problem
I have downloaded MDOP2014 (en_microsoft_desktop_optimization_pack_2014_x86_x64_dvd_4130158)
I have installed the Windows Assessment and Deployment Kit (Windows ADK) for Windows 8.1 Update
And then installed MSDaRT81.exe on a Windows 8.1 (with Update) machine
I have also copied the boot.wim from the "Sources" folder from the Win8.1 ISO file.
But when I start the DaRT Recovery Image Wizard an try to point to the folder with the boot.wim file, it gives me:
"The source folder must contain a valid boot.wim file"
I have tried boot.wim files from 8.1 ent, 8.1 ent with update, server 2012 R2, server 2012 R2 with update...no go
I am using boot.wim of win 7.
Any ideas????

Hi,
I found that if you point to the root directory (not the sources folder), then it finds the correct boot.wim. Specifically, I downloaded the 8.1 Enterprise evaluation ISO, then mounted the ISO (F:). When pointing to the sources folder, it gave the same error,
but when I pointed only to F:, it worked fine.
Additionally, both in the wizard and in the article 'Creating the DaRT 8.0 Recovery Image', it states:
Specify the root path of the Windows 8 <64-bit or 32-bit> install media
Hope this helps,
David
MDOP on the Springboard Series on TechNet

Wuc-015 Your form must contain the following bean ...

Hi,
I'm having this problem in forms 10g:
WUC-015: Your Form must contain the following Bean for this function to be availabe:
oracle.forms.webutil.file.FileFunctions
I have installed webutil and followed all the steps, I can the run the test form, but I'm having this problem when I want to run a form that has a attached library and this library is using the webutil_c_api functions (this library has the webutil.pll attached).
I've found this problem in metalink and they suggested to drag the webutil.olb in the form, but my form is not using the webutil, the library does, so I think I don't have to drag it in the form.
Besides I made all the sugestion about the configuration files of webutil.
waiting with anticipation for the solution ..
Thanks !!

If you want to use WebUtil functions like webutil_c_api you must follow the development instructions in the install.pdf. That includes attaching webutil.pll and webutil.olb.
In your case you have, to my understanding, created a library that uses webutil functions, and that you aren't using them. If you attach that library you must "webutilize" your Forms.
I would suggest that you split the library you made into two. One containing WebUtil functions, and one that doesn't. Problem solved?
Regards,
Martin Malmstrom

Invalid root. The WEB-INF/flex folder must contain either flex-config.xml or services-config.xml.

Hi,
I am tryng to create a Flex Project, but got stuck with an error....
The Error is Invalid root. The WEB-INF/flex folder must contain either flex-config.xml or services-config.xml.
Initially I download jboss-5.1.0.GA and placed it in C folder.
While creating project, I selected J2EE server, selected remote object access service and LiveCycle Data Services...
In the next step, I de-selected the use default location for local LiveCycle Data Services server.
In the root folder - C:\jboss-5.1.0.GA
for Root URL: http://localhost:8700/flex/
Context Root: /flex
when I clicl Validate Configuration.. this is the error I get Invalid root. The WEB-INF/flex folder must contain either flex-config.xml or services-config.xml.
I can't understand what is going wrong here....any ideas....
Thanks for the Help.....
Thanks

Run the wizard, select ColdFusion as the server technology, but don't
check the option to use remote object access service. Then, open the
project properties dialog, go to the Flex Compiler page, and add a the
compiler flag: -services
"C:\ColdFusion8\wwwroot\WEB-INF\flex\services-config.xml" (obviously
changing the path as appropriate). This flag is what gets set by the
wizard when you opt to use Flash Remoting. -http://www.feed-squirrel.com/index.cfm?evt=viewItem&ID=77732
Above is a work-around/solution that was successful for me. Below are screen shots of how I initially configured the project, following the above solution.
In the image above, notice how I didn't tick the "Use remote object access service" checkbox.
For the image below, the 'Y:\' value is a mapped network directory to my server (IIS) webroot, which is "\\windowsserver/Inetpub/wwwroot/". Root URL is the name of my server. Fill in the fields with correct values and hit finish.
Then navigate ( Project>Properties>Flex Compiler ) to this project's 'Flex Compiler context menu.
And 'W:\' is another mapped network directory that points obviously to my Coldfusion's WEB-INF\flex.
I hope that this helps. As you may see, I'm hoping that this will help you and others that are likely to come across problem.

Burn Cancelled, Story must contain entry???

Similar Messages

Maybe you are looking for