Burn cd audio problems

when i burn cd from macbook pro yosemite system i have problem i can't listen audio on studios or in car, some steps to burn it professional.?..i work with music i give a lot of people the cd with audio but not working..

Hello gezim1,
Thanks for using the Apple Support Communities. I understand that you are experiencing issues with CDs you are burning on your MacBook Pro. Are you using iTunes to burn these music CDs? If so, check out the following resources for helpful information. You may also want to check that you aren’t burning as a data CD or an MP3 CD, as some players cannot read these formats.
iTunes 12 for Mac: If you have trouble burning a disc
http://support.apple.com/kb/PH19495
iTunes 12 for Mac: Create your own CDs and DVDs
http://support.apple.com/kb/PH19494
iTunes 12 for Mac: Disc burning overview
http://support.apple.com/kb/PH19493
Cheers,
Matt M.

Similar Messages

Audio Problems when burning

I have tried making disc image, burning disc and the audio will pause for second several times in the play back. It does not do it when playing back in iDVD.
The slide show was started in iPhoto and sent to iDVD. I have started over several times and still same issue. Makes a bad impression and is really not useable for presentation.
I have 30 gigs free space, changed settings to Professional encoding and still same issue. I have no open apps, changed all energy settings and screen saver to never.
Any ideas, I am fresh out, never had this problem with previous version.
Frustrated

Andy,
This question is really in the wrong place - this is the iDVD '08 forum and not the iDVD 5 forum.
From the description of your problem using Toast, it sounds like you didn't actually export a DV video movie out of iMovie.
Export a DV video movie out of iMovie (it will run 13 GB per hour) and play it back with the QuickTime Player to see if the audio settings you made are really there. If this movie plays OK, you can bring IT into iDVD or Toast for turning it into a DVD.
If the DV video movie you created STILL has audio problems in the QuickTime Player, ask you question about THAT issue in the correct iMovie forum.
F Shippey

IMovie audio problems when burning in Toast 6

Hi,
i've tried to burn an imovie project in idvd 5 but i get 'the error #-1 was reported' like most people have been and i've tried loads of things suggested to fix it with no joy.
I then sent the imovie project to toast titanium 6 where it burned fine. However, when i watched it i noticed that although toast had picked up all the audio (both dv audio and aiff), it did not pick up all the volume adjustments during the movie. how annoying! for example: i have an aiff clip that fades into a movie clip with the sound gradually going down but Toast picks up the sound staying at the same level. this also happens with volume adjustments in a DV file.
Any suggestions why this happens / how i can fix it?
Cheers,
Andy

Andy,
This question is really in the wrong place - this is the iDVD '08 forum and not the iDVD 5 forum.
From the description of your problem using Toast, it sounds like you didn't actually export a DV video movie out of iMovie.
Export a DV video movie out of iMovie (it will run 13 GB per hour) and play it back with the QuickTime Player to see if the audio settings you made are really there. If this movie plays OK, you can bring IT into iDVD or Toast for turning it into a DVD.
If the DV video movie you created STILL has audio problems in the QuickTime Player, ask you question about THAT issue in the correct iMovie forum.
F Shippey

Audio problems from burning DVD's from Macbook Pro?

Hey guys,
So lately I have been having problems with burning DVD. I use either iDVD or Roxio Toast Titanium 11 too burn movies to play on my television. After burnign them I notice all of them have audio problems. It's as if the audio is faint for the dialogue but when background music plays its blaring! I checked my TV and its definitely not my Television because sound plays from both speakers. I was wondering if any other Macbook users had this problem or users of either of these programs had this problem because it's such a hassle burning movies without really enjoying them.
Any help is greatly appreciated!

Try the Importing & Burning in iTunes for Mac Forum

Audio problem when burning DVD

Hi, Hope that someone can help me, I have already make several DVD's,and those went fine, but the latest Imovie project is with spoken audio.
When I try to burn this with IDVD 5.0.1 everything went well till IDVD has come to the audio part, hereby it goes wrong. I didn't get a failure message but nothing happened further on.
Hope someone has a solution!
G5 Mac OS X (10.4.3) 2x1.8 ghz

Hello, prutgers,
You will need to be a bit more specific with your problem so we can help you.
What do you mean by 'it goes wrong'? What exactly happens?
You need to know that when your DVD is encoding audio, the process appears to be doing nothing. If you leave it alone for a while, it just may finish. Maybe you are not waiting long enough.
Especially if you don't get an error message. What are you doing? Did you force quit? Did the DVD burn and has an audio problem?
Give us more information!

ITunes audio cd burning gap track problem

Hello! When I burn an audio cd in iTunes, and chooses to have a gap between the tracks, there still is no gap between the tracks on playback of the cd.
I have tried both 2, 3 and 5 seconds gap, but yet no gap.
I have also updated my iTunes.
Seems like a bug in iTunes? Anyone who can help?

Is any crossfading turned on? Go to the iTunes menu, Preferences, and on the Playback section make sure it's turned off. The gapless playback feature was removed with itunes 11 (and never really affected playback anyway, which is probably why they removed it).

Can no longer burn an audio CD in iTunes 10.

Suddenly I can not burn an audio CD in iTunes. I currently have iTunes v. 10.7 which I have just upgraded from the previous version as I had the same problem burning a CD. I am using OSX v. 10.6.8. When burning a CD or DVD I always use my ex drive a Pioneer DVR-111D. I have never had any problems until recently. When I try to burn a playlist to CD I use the same settings that I have always used. Having selected BURN, the process shows as Initializing then starts to burn the first tune. Unfortunately, it hangs on the first tune and goes no further. I have tried various playlists and different CDs. Same problem However, when I burn the same playlist, using the same Pioneer DVR-111D to burn but using Toast 11.1 it works without a hitch.
Any suggestions would be greatly appreciated.
Michael.

Has nobody got any suggestions on what may be causing this problem. From searches I have made I see I am not the only one with the same burning issue.

Trying to burn an audio book....need some help...

Ok,
I am burning some auidobooks for a friend. Rather than the audio book being broken down into tracks it is one track. The first book went fine though I ran out of CD's. The first book was a mix of brands and contained CDR and CDRW.
I purchased the next set of blank CDRs and finished the first book fine no problem. Then I started to burn the next book. As before, it tells me that I need mutiple CDs because the track is obviously too long to put on one CD. So I start the burning process. Everything goes fine. No errors at all. I put the CDs in to check them. When I get to the second CD, however, there is a track listed but it does not play.
I check all my settings again (I am well versed in using my mac): Burn speed is at maximum and I am burning an audio CD. So I figure that I may be applying too much RAM else where in my comp so I close everything down except iTunes and I try again.
The process has no hiccups and seems to be fine and it completes. I again put them into check their completion and about half way through the first CD the audio just stops. Both times it keeps playing, but no sound is coming out. I try playing the CDs in other programs and in an external CD player to no avail.
So this is my problem. I have now wasted 12 CDs. I thought it might be the brand (Memorex) but remember that it did work. The only thing I think I can do is to slow down the write speed (the CDs are cabable of 52x...or so they say) or buy another brand But before I waste another 6 cds I was wondering if anyone had any advice?
Thanks,
Whiteonyx
15" iMac Mac OS X (10.4.9)

Whiteonyx,
Welcome to the group. I don't have advice for why it didn't work but I can tell you about good CD brands as I've had problems burning music in the paste. From being on this forum I have heard Memorex is bad although I've used them for music with no problem. The best though is Verbatim and that after I ran out of my cheap ones I bought a big bundle of them, Sony is also good, along with Maxell.
Here is my post on the subject of CDR's awhile back and everyone has different ideas of what is good:
http://discussions.apple.com/thread.jspa?threadID=713248&tstart=0
Hopefully someone else will know what is causing your problem.
S.

IDVD 4 Audio problems

My audio works just fine in both iMovie, and iDVD. When I play the DVD I burned the audio works just fine for the menus, and slideshows. After playing a movie for about 00:01:30 the audio cuts off for the rest of the movie. Any ideas?
2.5 Ghz PowerPc G5 Mac OS X (10.4.8) Using iLife 04

There can be some goofy audio problems. One recommendation is to Extract the Audio from your problem clip while in iMovie and see if this makes a difference in the DVD. [this creates a separate sound file, which sometimes fixes audio problems]
The point where the audio stops -- is it the beginning of a clip? near a transition? or?
John

I get and error when trying to burn a audio CD

I am tring to burn an audio cd of something I created in Final cut pro x and when I put the files in itunes and select burn to disc it spits out the disc and says "unknown error occured (-50)". I tried using .wav and .aiff no luck with either. I already searched the forum for this problem and didn't find any thing that worked.
Vince

Tried restarting your computer?
Error -50 is a generic "communications" error message which means just about anything. It could really be a communication error with your optical drive (loose cable, bad drive, bad controller, etc.), or an issue with your hard drive (connection, formatting, a whole list of anything else you can imagine). It could also be a host of non-obvious communications.
The place to start is to keep things as simple as possible and try to test individual links in the burning process. Can you burn outside of iTunes? Have you tried a slower burn speed? (Some utilities let you turn off the laser while test burning so you don't use up a lot of discs.)

HT3204 When attempting to burn an audio cd, I get an error message that says-burning failed due to unknown error (4280)? It has been working fine, until today...what does this mean??

When attempting to burn an audio cd from my playlist, I get an error message that says, burn failed due to unknown error (4280). It has been working fine for months...any solutions?

I have the exact same problem.
Been searching through this site to try and find an answer but still not come up with anything.
The wierd thing is that a couple of days ago it was working fine, and suddenly overnight it's stopped working.
The only solution i've found is that you need to have administrator rights as it says in the posts on the site below:
http://www.emergingearth.com/itunes-7-cant-burn-cds/
Noticed by the diagnostic in your post that you dont have admin rights like me so that mite be the problem. Not sure if this is the right solution though.
Windows XP

IDVD 4.0.1 audio problems--console log

So, I too am having audio problems in iDVD. Not always, but recently. Audio is recorded for parts, but not all of source from iMovie. Looking at the DiscRecording.log in Console, I see:
iDVD: Burn started, Sun Mar 19 20:48:18 2006
iDVD: Burning to DVD-R media with DAO strategy in MATSHITA DVD-R UJ-825 DAM5 via ATAPI.
iDVD: Requested burn speed was 47x, actual burn speed is 2x.
iDVD: Burn underrun protection is supported, and enabled.
iDVD: Burn finished, Sun Mar 19 21:18:02 2006
iDVD: WARNING: The DiscRec SPI from the DiscRecording framework is deprecated in 10.3 and later.
iDVD: WARNING: This app is contributing to an overall degradation of system performance and should
iDVD: WARNING: be updated to use the DR API instead.
Any ideas on what to do to fix it?
Thanks!
Matt
Powerbook G4 Mac OS X (10.4.5)

Hi Matt
There are so many things that can go wrong.
How did You go from (iMovie?) to iDVD.
- using the Share/export to iDVD from within iDVD
- dropping the project QT movie into an open iDVD theme window ?
Version of OS, iMovie, iDVD and QT ?
What brand of DVD disks ?
Anything connected to Your Mac during burning process ?
Any other programs running under process ?
Yours Bengt W

Mac burned iTunes Audio CD looses song data in PC??

In my Mac, I used iTunes to burn an "Audio CD". When it is in the Mac I see all expected track data and meta data: song, artists, genre, etc.
BUT, when I put it in my PC and open it in iTunes, it only shows Track01, Track02, etc.. no meta data, no nothing. Put it back into the Mac and viola.
What is the story? What would be the point and reason for this?

It has nothing to do with Windows and Mac. The problem is that for audio CDs, the data is remembered on the computer that burned it, and is unavailable to other computers. See info here:
Ever wonder how iTunes knows the name of the audio CD you just inserted? Or why it may not remember the name of some burned CDs?
Note that unlike an audio CD, a data CD does have the metadata burned in.

Premier Elements 8 Audio Problem

I just got a new Dell laptop last week that came with the Adobe Photoshop Elements 8 and Premier Elements 8 bundle pre-installed.   I’ve never worked with Premier Elements before and thought I’d try my luck with it yesterday. I edited several movie clips that were taken with my Sony camera in MP4 format, joined the clips into one movie with transitions between them, and rendered the finished product in .mpg format.
The video plays fine in all programs, but the audio is a different story. It is silent in Windows Media Player and Real Player, yet plays well in Windows Media Center and Windows Movie Maker. It also plays on my Dell PC in Windows Media Player (the same program that silences it on my Dell laptop).
I'm a senior citizen and have worked a little bit with Windows Movie Maker but that is all - nothing more intricate than that program. I’d like to burn my new movie file to DVD but would first like to know what is causing the audio problem. I'm hoping it's something simple and that this aged brain can understand the "fix". Any suggestions?
Thank you for any help you can offer me.
Anne

Hello Hunt, and thank you for helping me.
Yes, you have described the problem correctly. In PrElements, all was
well with video and audio - and still is OK in two of the video players I have
on this new laptop.   However, there is no audio in the other two programs
- but only on this Dell laptop in Windows Media Player. There IS audio in
Windows Media Player on my Dell PC. That's what really confuses me.
Yes, the original file from the camera was mp4 and was exported as mpg
(MPEG). I don't remember the settings I used; I think the only thing I
changed was a quality setting. Is there a way of going back and looking at the
original settings to jot down what they were?
I think that the free version of Real Player has improved over the years
and has a few more "goodies" now than it did in previous editions.   For one,
I was able to capture an internet video in its entirety last year, and
very easily. I wanted this video (a show trailer) for a slideshow I was
creating and couldn't figure out how to get it with any other application.
That's the main reason I installed Real Player last week on this new laptop -
"just in case" I want to do this again.
I will take your advice and look into the two free players...
And, in response to your second post, WMM has given me a good start but,
unless I'm missing something, it does not have the capability of burning a
DVD. I will check out the resources link and the Training Series that you
describe, and thank you so much for your help!
Cordially,
Anne
In a message dated 7/1/2011 11:23:58 A.M. Eastern Daylight Time,
[email protected] writes:
Anne,
Welcome to the forum.
Just to make sure that I am following you, I will restate what I think you
are experiencing, and then please correct me. Along the way will be a few
questions too.
You have created a Project in PrElements, and have Imported Video (with
Audio) into the PrE Project. The files from your Sony are in MP4 format.
In PrE you have your Audio, correct?
You have then Exported/Shared that Project to an AV file as an MPEG. Do
you recall the settings chosen for that MPEG?
That Exported/Shared file plays with Audio in some players, but in others
it only plays the Video, but not the Audio. Is that correct?
Knowing the settings used to create that MPEG file might explain why some
player software does a good job, where other players have an issue.
This is an aside comment - I find that WMP, especially the later versions,
is not a good choice for a player. It seems that MicroSooft has done as
much as possible to strip it of most capabilities. Instead, I recommend two
free players,
http://gofree.com/download/Video/Media-Players/vlcmediaplayer.php?gclid=CLW6soS44KkCFQoBbA odO3L2Xg and
http://mpc-hc.sourceforge.net/. Both are excellent, and will play files, that some other players struggle
with. Again, both are free. Because all players are not created equal, I
just go with what works. If you were distributing these files to a client,
that was locked into WMP, especially the newer versions, then addressing the
issue would be worth the detective work. If that was the case, then I
would explore Exporting/Sharing to WMV format, rather than the MPEG.
I have not used RealPlayer in about a decade. I found it to be nearly
useless then, and rather ill-behaved. I will not let it near my computers,
though it has possibly been improved over the years. If you have any RealMedia,
MediaPlayer Classic HC, can be modified with a free plug-in, to allow
that. If you do not have RealMedia files (usually designated by .RM), then I
would not worry about taht. Only install what you need, when you need it. I
would just ignore RealPlayer, since it is installed.
Good luck, and hope that this was helpful. Let us know a bit more about
the MPEG settings, please.
Hunt

IMovie to iDVD audio problems

Hello,
I am using iMovie '09 (version 8.0.4). I have created a movie with mp3 audio files playing in the background with the clip volume at 0. The video clips are interspersed with some images every now and then as well as transitions. The movie plays quite well when i preview it in iMovie.
I then share the movie with iDVD (version 7.0.4). When I play the movie in iDVD, almost the entire thing plays perfectly except for this one little part. In that little part, audio from some clip starts playing along with the background music.
More things about my project:
1. I am using audio ducking only once, I know where it is in the timeline and it is working just fine
2. Where the problem occurs, I have looked if I might be doing something wrong in precision editor. Turns out I am not using precision editor on the clips where the audio problem occurs at all
3. All video clips around where the porblem occurs are at a volume of 0
I am confused. Please help.
Thanks.

Hi
*No audio on DVD disc.*
Most common origin.
1 Imported audio from iTunes.
• In iTunes copy out as an audio-CD .aiff
• Use this in Your movie project
2 Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
3 Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
4. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies—except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format—that I have noticed.
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple Disk Util tool
• OR burn with Roxio Toast™ if You got it
Yours Bengt W

Burn cd audio problems

Similar Messages

Maybe you are looking for