Burn DVD with chapters?

I put chapter markers in my Final Cut Pro project, but when I exported my .mov file and used Toast to burn a DVD, there were no chapters. How on earth do I make a DVD with chapters?

The chapter marks will be respected by Compressor and DVDSP.
You can either go back into FCP and re-export with DVDSP markers or you can set markers on any GOP boundary in the DVDSP track timeline. Both apps have very nice Help files for specifics.

Similar Messages

  • Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the fil

    Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the file goes very well with chapters and scenes before burning). thanks very much, response appreciated, Alain

  • Combine several Quicktime (.mov) files into a DVD with chapters

    I made several Quicktime movie segments (.mov) that I periodically upload to Youtube. Now I have a collection of these short 30 secs to 5 minute videos that I want to incorporate into 1 DVD.
    How do I burn it with chapters to represent each videos?

    I was experimenting on different formats (they are converted to mp4, m4v and mov files before uploading to Youtube) at the beginning before I settled on .mov files. My Macbook only have 80 gigs so I want to preserve all of the clips I did in DVDs before I erase them from the hard drive before importing/starting a new tape. All of them were captured using a Sony Digital 8 camcorder.
    Message was edited by: Nelson Evangelista

  • I have a Power Mac G4. I have previously burned DVDs with no problem.  Now I get an error message stating it doesn't recognize the disc and an error

    I have a Power Mac G4 with OX 10.4.11.  I have previously burned DVDs with no problem.  Now I've gotten two different sets of messages.  One states that
    the disc is not readable and an error code: 0x8002006D.  The more recent message states the disc is incompatible and an error code: 0x80020025.
    What is going on?  I need to burn discs immediately for a conference next week.

    "The more recent message states the disc is incompatible and an error code: 0x80020025."
    The error (0x80020025) refers to an unsupported drive (not disk).  I've read about relaunching the Finder to correct the problem.  Choose "Force Quit" from the Apple Menu and then choose "Finder." Click "Relaunch" and see if the drive still produces the error.  If there's no change, I'd be tempted to replace the drive.

  • Burning dvd with premiere elements 11

    I burn video files on to dvds.  I always key NTSC widescreen.  Sometimes, the image fills the tv screen.  Most of the time however, there is a 2" wide black border around the image, between the image and the edge of the tv screen.  How do I get the image to fill the tv screen?

    Thank you for responding to my problem.  I'm afraid the reading didn't help.  All of my 20 files were created with the same camera, the same project settings, the same equipment, etc.  But when I burned each of them to their own dvd disc, a few of the programs filled the frame on the tv down the hall.  Most however, have a 2" black border around the image.  It makes no sense to me. 
    Date: Sun, 10 Mar 2013 10:32:25 -0700
    From: [email protected]
    To: [email protected]
    Subject: Burning dvd with premiere elements 11
    Re: Burning dvd with premiere elements 11 created by John T Smith in Premiere Elements - View the full discussion
    Some reading that may help... what you describe SEEMS like a mismatch between your video and your project
    Online User Guide http://help.adobe.com/en_US/premiereelements/using/index.html
    -Page to download current PDF http://helpx.adobe.com/premiere-elements.html
    Importing Video http://forums.adobe.com/thread/1065281
    -and project settings http://forums.adobe.com/thread/1112086
    Saving & Sharing http://forums.adobe.com/thread/1137128
    -Sharing to DVD or BluRay http://forums.adobe.com/thread/1137645
    -Sharing for Movies http://forums.adobe.com/thread/1051093
    -Sharing for Computer http://forums.adobe.com/thread/1058237
    Steve's Basic Training Tutorials... steps are the same for several versions
    -http://forums.adobe.com/thread/537685
    -v11 http://www.amazon.com/Muvipix-Guide-Premiere-Elements-version/dp/14793 11200/
    -All http://www.amazon.com/Tricks-Adobe-Premiere-Elements-Muvipix-com/dp/14 51529724/
    -and http://forums.adobe.com/thread/498626
    -and http://prodesigntools.com/four-hours-free-video-tutorials-new-photosho p-elements-9-pse9.html
    -and http://prodesigntools.com/five-hours-free-tutorials-photoshop-and-prem iere-elements-7-and-8.html
    FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_ faq
    TIPS http://forums.adobe.com/community/premiere_elements/premiere_elements_ tips
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5136593#5136593
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5136593#5136593
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5136593#5136593. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Premiere Elements by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Cannot Burn DVD with DVD Studio Pro 2

    Help.
    I can't burn DVDs with DVDSP 2.
    Here's the error message :
    "Recording Engine : Device is not supported for the requested burn operation."
    Anyone else have this problem?
    G5   Mac OS X (10.3.9)  

    Sounds to me like you have a LaCie d2 dual layer burner or one of the LaCie burners that has issues. LaCie has created an updated driver to fix this so check the support site:
    http://www.lacie.com/support/drivers/index.htm
    -Jake

  • To BALTWO:I really appreciate the fast sent solution about my failure to burn DVDs with Lion, but I am 89 years old and think I know something about computers, but don't have a clue about ZAPPing PRAM nor RESET SMC.  I also can't find any evidence of a p

    I really appreciate the fast sent solution about my failure to burn DVDs with Lion, but I am 89 years old and think I know something about computers, but don't have a clue about ZAPPing PRAM nor RESET SMC.  I also can't find any evidence of a preserved earlier OS (Snow Leopard).  I also don't know how to partition further my drive after all this time…(I used to have Parallels partitioned) but as I said I cannot find any where on the HD SN.  Is it possible that it doesn't exist anymore?  Not too technical, please, unless that is the only possible answer to this whole delemna..

    Blue colored text in these forums usually indicates a clickable link. The two I posted in https://discussions.apple.com/message/18789716#18789716 bring up Apple's articles on those subjects. For partitioning information, peruse Disk Utilities help files, especially
    Changing a disk’s formatting and partitions
    BTW, the proper way to respond to a post is to use the Reply button and not start another. Good luck and hope you make it to your tenth decade—I'm in my eighth.

  • How can I Burn a Simple DVD with Chapters and Menus out of My Home Videos.

    I created an iMovie (unsig iMovie 10.0.2) of my daughter's volleyball season.  I inserted markers separating each game day, hoping these would create chapters in my DVD.  Then I did some research about DVD burning apps and finally downloaded BURN.  With Burn I created a DVD, but this DVD did not have chapters and also did not have a customizable menu.  The whole movie ended up as one 2 hour long chapter.
    I have hundresd of family vacation on a hard drive stored and would like to start making iMovies of them to put on DVD for easy watching and forbackup  storing.
    What is a simple way I can burn my iMovie with chapters onto a DVD?
    My macbook pro did not come with iDVD so I dont have it.
    Thanks.

    MY source is HD i beleive. I shot videos with an iPad Mini.
    I ventured into this because I offered this DVD to several team parents, so they are waiting for me to give them the DVD.  While I was making it, I added subtitles, showing the game dates, game scores and stats of each player, so it came out really nice.  However, not to concern about quality, i have burt the video in a dual layer dvd in SD.  I dont have a blue ray burner nor media.
    This made me want to do the same with my family vacations vieeos, whic now are a bunch of files in a hard drive, sort them by vacation and add titles like lications to actualy be abel to watch them on a dvd someday.
    I have apple tv in the family room, but do not use to watch these videos, will look into that. However, I would still want to make the DVD's.
    It seems odd how this, basic feature, has been dropped. I guess apple does not want us to use any more discs.
    Still hoping I can do this, if not, I will have to gie away the DVDs with the 2 hour long video in a single chapter.

  • Making a DVD with chapters

    I'm making a DVD on iDVD with chapters but it won't play all the way through unless it comes back to the menu. I could do it on DVD Pro but it doesn't have the theme I am using on iDVD and it won't let me import it either. iDVD let me make scenes or chapters but not where it supposed to be. How can I change that?
    Thoughts anyone?
    Sheyla

    Hi Sheyla
    This can be more than one problem. As I get it You are using FinalCut Pro and iDVD.
    Then
    • How do You go from FCP to iDVD - all steps described ?
    • Are You aware of the iDVD BUG ?
    I have a general note on this and more - Please read.
    FCE/P to iDVD
    Several things that I keep in mind
    • How to go from FCE/P to iDVD
    • Free space on Start-up hard disk
    • Encoding
    • Brand and type of DVDs used
    • Burn speed set
    • iDVD BUG
    • Chapters
    How to go from FCE/P to iDVD I do
    • Disable Screen and Energy saver
    • IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mixdown
    • Export out as a QuickTime .mov file
    • Select with Mark - Chapter Mark
    • Not as Self-Contained (not important but saves time and space)
    • NO QUICKTIME CONVERSION (IMPORTANT)
    This QT.mov file I import into iDVD from within iDVD.
    Free space on Start-up hard disk
    I set a minimum of 25GB (for Mac OS and iDVDs temp files)
    Encoding
    • I use Pro Quality encoding
    Brand and type of DVDs used
    • I use Verbatim
    • I use DVD-R
    Burn speed set
    • I set down this to x4 (or x1)
    iDVD BUG
    • One can not go back to movie-project for any alterations and then go back to
    the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
    of them will work.
    Medicine - Start a brand new iDVD project.
    Use of Chapters
    • I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
    • NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it self
    • No Chapter marks in or within two seconds from a transition
    (Way around this last one - Export movie as QT full quality and NO Chapter marks
    Import this into a new Movie-project and now You are free to set C-Ms where You want
    them except at very beginning - still)
    Material used to build movie
    • video - I use streamingDV (or convert all other to this eg .mp4, .avi, .wmv etc)
    • audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
    • photos - I use .jpg - no .bmp etc
    Trash iDVD pref file and run Repair Permissions - and have a re-try.
    from post ??
    May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screensaving
    Yours Bengt W

  • Burning dvd with no menu

    Hello,
    I am looking for a way to burn a movie so that the movie automatically plays when ou put it in the dvd player, without a menu screen coming up first. is that possible?

    I have burned dvd's from idvd with no menue. What i did was go to the themed screen I chose, whether I want to use it or not in the final burn, and click on the "three boxes" icon (called the" show the DVD map")on the bottom of the menu page. It shows a box with the words "Drag content here to automatically play when disc is inserted.What I do is click and drag the movie to that gray box, and then continue on to burn the dvd to a disk. the dvd will burn and will automatically play when you insert the finished dvd into a dvd player.
    aheart4god2

  • Internal software error: .\vobulator\titleplanner\cgopgrouper.cpp, line 401 when burning DVD with sl

    I am burning a DVD that has 10 slideshows. Each slideshow is treated as a chapter. I have burned DVDs in the past using this method with no problems. Now, with this project I get the following.
    internal software error: .\vobulator\titleplanner\cgopgrouper.cpp, line 401

    This error came up again (the first time i had to rebuild), and i figured out that it had to do with a clip i had in a timeline that needed trimming, and would not butt up cleanly to the preceeding clip. i am assuming that the chapter point i inserted did not fall on a GOP, and generated this error.
    when i took that clip out of the timeline and put it in it's own seperate timeline, the disc burned with no problem.
    hope this help someone else skip the frustration i had.

  • Burn DVD with Premier Elements 12

    When I try to burn a DVD with Premier Elements 12 it gets stuck at 5%.  I cannot cancel it.  It just keep running.  It was working before, but has not worked the last 3 times I tried it. 
    . 

    Things and Software to AVOID when authoring/burning a disc... says Encore, but also applies to Premiere Elements and disc burning
    Start --> http://forums.adobe.com/thread/608660
    #2 has WHY Explained http://forums.adobe.com/thread/607390
    Plus http://forums.adobe.com/thread/562941
    http://helpx.adobe.com/creative-suite/kb/cd-dvd-drive-recognized-application.html
    Set your DVD output to a folder on your hard drive and then use the FREE Imgburn to write the folder to disc (send the author a PayPal donation if you like his program)
    Read http://forums.adobe.com/thread/1322583 for notes on installing Imgburn WITHOUT any toolbar add-ons

  • How do i burn dvd with no menu - just play?

    hello,
    I need to burn a dvd with no menu, so that when it plays, it goes straight to movie...
    thanks,
    steve

    Steve - import your asset into DVDSP so that it appears in the assets tab. When imported (and the button shows green), drag the footage into the time line. This sets the footage into 'track 1'.
    If you look in the outline view you will see Menu1 and Track 1 listed. menu 1 is the default choice for 'First Play' - if you now click on the disc icon at the top of the outline view then look in the property inspector you will find another way of setting 'First Play' - simply use the option to select the track instead.
    If you control+click on the track icon in the outline view (or in the graphical view for DVDSP 3+) you get the option to set First Play there too - simply select the words at the top of the contextual menu.
    Check here too:
    http://www.kenstone.net/fcphomepage/first_playwarmouth.html

  • Unable to burn DVD with iMovie?

    Am fairly dissapointed with Apple.
    I have spent time today creating a short movie of photos of my 2 month old son.
    When trying to share with iDVD I have realised that my iLife 11 doesn't come with this software and I can't download it!
    I am therefore unable to burn my project to disc and feel I have wasted my time.
    In my opinion this seriously reduces the usablility of iMovie.
    Is there anyway I can burn the DVD without spending a shed load of cash on some third party software??
    Thanks

    I was also disappointed when I bought my Mac and it came without iWeb and iDVD.
    For burning DVDs, I use a free app called Burn http://burn-osx.sourceforge.net/Pages/English/home.html.
    You can't do fancy menus or anything that iDVD can, but at least you can get your iMovie Projects onto a DVD.
    You have to export your project from iMovie and then drag the .m4v or .mov file that comes out onto Burn (Make sure the Video tab at the top is selected.
    Of course, if you have a MacBook Air, you'll need an external optical drive capable of burning DVDs.

  • Bad quallity film after burning dvd with idvdv professional quality.

    After making a movie in imovie and importing it in idvdv the quality is still HD
    after burning a dvd with professional quality the quatity of the dvdv is very poor. Horizontal lines are dancing over the screen!!
    Can anyone tell me wat is going on???

    Keep in mind that all Dvd's burned through your mac and are playable on your mac as well as your set top DVD player are ALWAYS standard definition /SD. There is no way around this (that is if your intentions is for playback on most computers and most set top Dvd Players.
    One of the limiting factors is apple's dvd player app. It isn't fully blu-ray compatible yet. Meaning that even if you did burn a high def. Dvd which is only playble on Sony's PS3 and most set top Blu-ray players .... the finished Dvd won't play on your mac since apple has yet to update/upgrade their DVD Player application to fully incorporate Blu-ray standards. To the best of my knowledge, apple's support is very limited here. Hence the alternative for mac users is to use Roxio Toast's Blu-ray plug in as well as Toast Blu-ray player. If you opt to go high def through Toast then the completed Dvd will NOT play on most set top dvd players but will on most Blu-ray Players as well as Sony's PS3.
    Hope this advice helps but if not just come on back.
    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
    Message was edited by: SDMacuser

Maybe you are looking for