Burn error 4251 and 4221

Hi
I have get errors 4251 or 4221 when trying to burn audio files from itunes. I have a Toshiba Satellite which uses MS Vista.
Does anyone happen to know how to fix this by any chance???
Thanks heaps.

I don't know about 4221, but this is what I did for 4251 (though, I still don't know what the error actually means):
Go to "Edit" > "Preferences" > click the "Advanced" tab > and then the "Burning" tab.
Then lower the preferred speed (say, from 24x to 16x) and change the gap between songs from two seconds to none.
Since doing this I've only had the error come up a couple of times in which case I just lowered the speed once again.
Hope this helps

Similar Messages

  • Burn error 4315 and 4450

    I have burned one cd in audio successfully. I have recently purchased new music and have followed all the steps to create another one and it wont burn and I get these two burn errors 4315 and 4450.
    Can anyone help me understand what this means?
    Thank you.
    Nessy

    I don't know about 4221, but this is what I did for 4251 (though, I still don't know what the error actually means):
    Go to "Edit" > "Preferences" > click the "Advanced" tab > and then the "Burning" tab.
    Then lower the preferred speed (say, from 24x to 16x) and change the gap between songs from two seconds to none.
    Since doing this I've only had the error come up a couple of times in which case I just lowered the speed once again.
    Hope this helps

  • Burn error 4251

    Sorry I know this has been addressed in post ealier but i have recently down loaded Itunes music from the store and get error 4251 after around the third song burn't.
    I am able to burn all music i have imported from CD but the purchesed album just will not burn.
    I have the most recent driver and firmware software for my HP 8200e cd writer and just cannot get the full album to burn.
    Any suggestions?

    Have found loads of messages containing error 4251 but with no real resolution to problem.
    All i want to do is burn the music i purchased to CD for use in the car.
    Will not be purchasing from I-tunes again if cannot resolve problem.

  • ITunes Burn Error 4251-NEED HELP!

    I am having problems completing a burn with my Itunes playlist that I have created with in my Itunes player; I have set my preferences, set a lower speed, etc. to try to correct this but still get the Error 4251 popup everytime I try to burn. The audio CD will eject after Itunes says CANCELLING BURN-THIS MAY TAKE A MINUTE OR TWO.
    If there anyone on here who can help with this, please post a reply.
    I have copied a copy of my diagnostics for you to see:
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    HP Pavilion 05 P9919A-ABA 513c
    iTunes 7.1.1.5
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: DRVMCDB (1.0.0.1), SSCDBHK5 (1.0.0.1), PXHELP20 (2.0.0.0), MXLW2K (1.0.1.104), PFC (2.5.0.196), AFS2K (3.1.21.0),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    SiS 650651_M650740
    NVIDIA GeForce2 MX/MX 400
    NVIDIA GeForce2 GTS
    NVIDIA GeForce2 Integrated GPU
    S3 Graphics ProSavageDDR
    S3 Graphics ProSavageDDR
    Intel(R) 82845G/GL Graphics Controller
    Intel(R) 82845G/GL Graphics Controller
    Intel(R) 82845G/GL Graphics Controller
    Intel(R) 82845G/GL Graphics Controller
    Intel(R) 82845G/GL Graphics Controller
    Intel(R) 82810E Graphics Controller
    Intel(R) 82810E Graphics Controller
    Connected Device Information:
    DiskDrive, SAMSUNG SV4002H, Bus Type ATA, Bus Address [0,0]
    CDROM, MITSUMI CR-48XATE, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    E: MITSUMI CR-48XATE, Rev 5.0F
    Drive is empty.
    Force Optical Power Calibration before burn is turned on in the preferences.
    The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive E: MITSUMI CR-48XATE on CDR media at speed 4X.
    HP Pavilion 513c   Windows XP  

    Crikey.
    C:\\program'files\iTunes\iTunes.resources\pt.lpro\duplicatesplacard.nb\objects.x ib
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • CD Burning error 4450 and 4850

    I've tried burning CD's from my iTunes and it flat out doesn't work anymore. It starts and then cancels after a few seconds with 'error 4450' and sometimes it goes on to the second song but then cancels with an 'error 4850.' I've also noticed I can't import sometimes, even if the CD has virtually no scratches. Is it my CD drive or is something else up? Please help!

    I'm having exactly the same problem with 4450 & 4850 errors, using compatible hardware and several different brands of blank media. I've tried uninstalling and reinstalling iTunes and made sure my drive's drivers are current. It seems that a number of users are experiencing the same problem, and I'm anxious to see an explanation and solution posted.

  • Please Help, ready to kill myself Burn error 4251

    I can not burn any cd's, keep getting error message 4251
    Apple has been no help. If you know a fix please help
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Sony Corporation PCV-RZ44G(UC)
    iTunes 6.0.3.5
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: PxHelp20 (2.0.0.0), Cdr4_xp (5.3.5.10),
    UpperFilters: GEARAspiWDM (2.0.4.3), pwd_2k (5.3.5.10), cdralw2k (5.3.5.10),
    Video Driver: NVIDIA GeForce FX 5200 \GeForce FX 5200
    DOT4\Vid03f0&Pid_3102&DOT4&STOREHPHI09, Bus Type USB
    IDE\DiskST3160021A_____________________________3.04___, Bus Type ATA, Bus Address [0,0]
    USBSTOR\DiskSony___UMH-U_HS-CF____2.12, Bus Type USB
    USBSTOR\DiskSony___UMH-U_HS-MS____2.12, Bus Type USB
    USBSTOR\DiskSony___UMH-U_HS-SM____2.12, Bus Type USB
    IDE\CdRomPIONEERDVD-RW__DVR-106D________________1.00___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomSAMSUNGCD-ROM_SC-140C__________________A101___, Bus Type ATA, Bus Address [1,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    E: PIONEER DVD-RW DVR-106D, Rev 1.00
    Media in drive is blank.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 12 16.
    The drive CDRW speeds are: 4.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.
    F: SAMSUNG CD-ROM SC-140C, Rev A101
    Drive is empty.
    The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive E: PIONEER DVD-RW DVR-106D on CDRW media at speed 4X.
    Sony   Windows XP  

    Hmmm, Wiseguy, what's that scene in Blazing Saddles...? Where the guy holds a gun to his own head and says no one move or the n* gets it.
    But let's see if we can get you straightened out.
    Let's start with the support page for your computer.
    You're going to want the update for the Pioneer firmware. The version of firmware they have here is 1.10 and you're running 1.00.
    If that doesn't help, come back and we'll try something else.

  • Burning error 4280 and 4450

    Hello!
    So I've read all the helpful answers about this, and have tried every fix, but nothing works. Every discussion thread is super old and I wonder if there is anything more up-to-date?
    This registry fix... in this thread...last post.... MIGHT be my problem, (and I suspect that it is) but the directions are confusing and don't match my computer's registery or driver details.
    https://discussions.apple.com/message/2904875#2904875
    If someone can interpret these a little clearer or to match my particular computer it might be helpful. I can provide more info on this if needed.
    Some information:
    I have a Toshiba laptop with a MATSHITA DVD RAM UJ 850S driver.
    (I DO NOT have a Sony driver)
    I have the 4280 error. I ALSO have the 4450 error.
    It happens every time I burn no matter what brand of disc Im using or speed Im burning at.
    Either it will burn a few songs and then cancel, or it will cancel before it starts to burn.
    I can burn DVDs with my DVD copying software.
    I CANNOT burn CDs with Windows Media Player or Real Player or anything else.
    There are no needed updates to my driver. The computer tells me that everything is up-to-date.
    I have had this problem for over a year and a half and have not found a fix yet.
    Here is the diagnostic and thank you very much for taking the time to help me!
    Microsoft Windows Vista Home Basic Edition Service Pack 2 (Build 6002)
    TOSHIBA Satellite A135
    iTunes 10.4.0.80
    QuickTime 7.7
    FairPlay 1.12.20
    Apple Application Support 2.0.1
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.4.1.2
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.2 (333.2)
    Gracenote SDK 1.9.1.485
    Gracenote MusicID 1.9.1.102
    Gracenote Submit 1.9.1.133
    Gracenote DSP 1.9.1.43
    iTunes Serial Number 0019B2300A61A3D0
    Current user is not an administrator.
    The current local date and time is 2011-08-28 12:51:07.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is not supported. (16005)
    Video Display Information
    Intel Corporation, Mobile Intel(R) 945 Express Chipset Family
    Intel Corporation, Mobile Intel(R) 945 Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: 9af17f30afbca638be116b77222c3c6d
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:          {37861A6F-A564-43D7-84B0-5BCF9B6D1C6E}
    Description:          Atheros AR5006EG Wireless Network Adapter
    IP Address:          192.168.1.106
    Subnet Mask:          255.255.255.0
    Default Gateway:          192.168.1.1
    DHCP Enabled:          Yes
    DHCP Server:          192.168.1.1
    Lease Obtained:          Sun Aug 28 11:08:04 2011
    Lease Expires:          Mon Aug 29 11:08:04 2011
    DNS Servers:          68.87.69.150
                        68.87.85.102
                        192.168.1.1
    Adapter Name:          {77214E6C-06F6-4AE7-82E5-52A93D18CA7B}
    Description:          Realtek RTL8101 Family PCI-E Fast Ethernet NIC (NDIS 6.0)
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Wed Dec 31 16:00:00 1969
    Lease Expires:          Wed Dec 31 16:00:00 1969
    DNS Servers:
    Active Connection:          LAN Connection
    Connected:          Yes
    Online:                    Yes
    Using Modem:          No
    Using LAN:          Yes
    Using Proxy:          No
    SSL 3.0 Support:          Enabled
    TLS 1.0 Support:          Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2011-08-28 12:45:37.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.0.1),
    D: MATSHITA DVD-RAM UJ-850S, Rev 1.90
    Drive is empty.
    Error Correction is turned on for importing audio CDs.
    The last failed audio CD burn had error code 4450(0x00001162). It happened on drive D: MATSHITA DVD-RAM UJ-850S on CDR media at speed 24X.
    **** Device Connectivity Tests ****
    iPodService 10.4.0.80 is currently running.
    iTunesHelper 10.4.0.80 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB.  Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC.  Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    Texas Instruments OHCI Compliant IEEE 1394 Host Controller.  Device is working properly.
    Most Recent Devices Not Currently Connected:
    iPod shuffle (2nd Generation) running firmware version 1.0.4
    Serial Number:          5C706ANCXQY
    iPhone 4 (CDMA) running firmware version 4.2.10
    Serial Number:          C8QG2SDDDDP8
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    I forgot to put the diagnostics in. Hopefully this will helps
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Dell Inc. Dimension 5100
    iTunes 7.1.1.5
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), sscdbhk5 (1.0.0.1),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    RADEON X300 SE 128MB HyperMemory
    RADEON X300 SE 128MB HyperMemory Secondary
    Connected Device Information:
    DiskDrive, SAMSUNG HD160JJ, Bus Type ATA, Bus Address [0,0]
    CDROM, HL-DT-ST DVD-ROM GDR8163B, Bus Type ATA, Bus Address [0,0]
    CDROM, _NEC DVD+-RW ND-3530A, Bus Type ATA, Bus Address [1,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    D: HL-DT-ST DVD-ROM GDR8163B, Rev 0D20
    Drive is empty.
    E: _NEC DVD+-RW ND-3530A, Rev 102B
    Drive is empty.
    The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive E: _NEC DVD+-RW ND-3530A on CDR media at speed 16X.

  • I am trying to burn a CD from a playlist in iTunes. I set everything up, and then when it tries to burn, it cancels the burn right away, and gives me the error code: 4251. What am I doing wrong?

    Okay, so I wanted to burn a CD to play on players in the house. The songs on my playlist are from CDs that I own and imported into my iTunes. Here are the steps I've taken:
    1. I created a playlist
    2. Selected File > Burn Playlist to Disc...
    3. My Burn Settings are as follows: Maximum Possible Speed (I have tried all the other speeds as well with the same result), Audio CD (No gaps between songs), Use Sound Check is selected, Include CD Text is selected (I have also tried unselecting these two options).
    4. Then I clicked Burn
    5. Within a couple of seconds "Cancelling Burn" shows up in the window at the top of the screen, and a box pops up that says: The attempt to burn a disc failed. An unknown error occurred (4251).
    I have tried different CDs, I have changed all the settings in the Burn Settings box, and I get the same result over and over again. I researched the error 4251, and it refers to a problem with importing songs from a CD. This is totally irrelevant since I'm not trying to import, I'm trying to burn. This is a blank CD, and it is a CD-R. These CDs are off a tower I purchased less than a month ago, and have had absolutely no problem burning other things to these CDs. I really don't want to have to re-import these songs to Windows Media Player or another application just so I can burn what I want onto a CD, but this is almost the point I am at.
    iTunes certainly isn't helping me much at this point, and I would appreciate any feedback into what I am possibly doing wrong in trying to create a CD.

    I have Windows 7 on a Dell.  Open and play iTunes in the compatability mode and use Windows XP (service pack 2).  Disregard any messsages to disable the compability mode.  This has worked for me.  I have also reinstalled iTunes and played with burn speeds etc.  These ideas did not work.  Compatability mode works.

  • HT1349 iTunes 11.03.42 problem burning disks Error 4251 with Windows  Vista Service Pack 2

    I am having problems burning a playlist to CD - type Maxell CD-R 80XL. I have been using these successfully for a while.
    iTunes 11.03.42 updated today Error 4251 and wastes a CD
    I have run windows registry cleaner
    I have tested CD drive with diagnostics
    Cant find the problem
    Yesterday I successfully burnt a CD with a different playlist
    All musice imported in iTunes
    Help and / or advise please
    Mal

    Hi Dilbert41
    Turned off my firewall and tried but still didnt work. Rang Apple Care and went through about 10 things. Didnt resolve.
    I then tried different media and a CDRW worked.
    I wasted 10 CD-Rs today
    Not really sure if its a media problem as 2 CD-Rs out of the same batch worked yesterday.
    Thanks for trying to help

  • Can Someone please help me with ERROR 4251

    I have tried everything! even slowing down the burn speed.
    Can someone please help with error 4251 when burning.
    I have my diagnostics report done as well.
    Thank you to anyone who can help.

    I did a quick google search for "iTunes error 4251" and this was the first result.
    http://forums.techarena.in/motherboard-processor-ram/1215316.htm
    The last post in that forum said a few things.
    1.Restart computer
    2.Disable anti-virus/security programs
    3.Update hardware and software drivers.(I'm guessing mainly the cd-rom drive drivers)
    Try those things and see if it is still a problem.
    ~Bill L.

  • Error 4251-need help!

    When burning discs I get error 4251 and when running cd diagnostics I continually get this message. Any suggestions on how to correct this?
    DiskDrive, ST340014A
    Could not open CD handler, 5. Problem with installation of drive in Windows or drive contains copy protected CD.
    Dell dimension 4600   Windows XP  

    so no one can help me?

  • Burning error 4000....again

    So once again, I face the issue of burn error 4000. I was able to burn one cd tonight, then it decided that I was to burn no more. I tried running the "repair" function from the "Add/Remove Programs" in the control panal to no avail. Has anyone else had the problem of burn error 4000, and if so and you were able to fix it, how did you fix it? I would like to burn the songs I purchased recently since my mini's battery is being replaced and I don't have a way to back up those songs at the moment, unless I dump them onto my external hard drive....help!
    ~broadcasterchick

    hiya!
    You mean the one that Eme posted?
    um ... i'm not sure. my monitoring of "Importing & Burning" is still kind of patchy ...
    here's the most complete version of it (for burning). we start with the Apple advanced burning reference:
    http://docs.info.apple.com/article.html?artnum=93286
    ... supplemented by background documentation and on updating drivers and firmware:
    http://docs.info.apple.com/article.html?artnum=300252
    toonz, "Where to find firmware for your CD/DVD drive", 05:55pm Apr 15, 2005 CDT
    ... and then advice to check for more documentation and to submit CD diagnostics to Apple at their optical drives troubleshooting page:
    http://www.apple.com/support/itunes/windows/cddiagnostics/
    and especially when it's a 3000-4000-range error, i throw in the MS troubleshooting documents too:
    http://support.microsoft.com/default.aspx?scid=kb;en-us;324129
    http://support.microsoft.com/kb/314096/EN-US/
    for good measure, here's the "drive reading" reference, too:
    http://support.microsoft.com/kb/321641/
    (at some stage, if i've got time, i want to go on a trawl through ilounge and ipod garage forums too to see if they've accumulated any additional wisdom on these sorts of errors.)
    love, b

  • Error 4251 while burning to a disc

    I keep getting an "Attempt to burn disc failed error 4251" message while trying to burn playlists to a disc.  I've upgraded to the newest version of iTunes and tried using the lowest speed setting and the highest maximum to no avail.  Any suggestions?

    Not sure I can help very much, but I have had similar problems with large projects. I think (but I'm not sure) that iDVD does not do a very good job of estimating the size of the project until it starts to render/encode. So your project might be too big even for a dual-layer DVD. Can you reduce the size/length of the movie at all. And/or reduce the size of any iDVD slideshows you might also have in the iDVD project.
    One small trick (I think this is true, but again I'm not 100% sure) is to reduce the size of the audio. If you use songs from iTunes, what format are they? I keep my songs in Apple Lossless which makes the files large. When I compress them to say AAC 128 or 160 in iTunes, and then use those smaller file versions in my iMovie project or slideshows, it reduces the size of the iDVD project.

  • Error 4251 when burning a CD

    I cannot find an answer to any of the previously posted topics about unknown error 4251 when attempting to burn a playlist to disc, and I've gone through 25 CD-Rs trying to fix it myself. I've reduced the write speed, maximised the write speed, and changed CD-R and CD-RW brands twice (Maxell and Fuji). Please, please help!
    Diagnostics:
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Hewlett-Packard Presario V2000 (EH463UA#ABA)
    iTunes 7.1.1.5
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Found aspi32 running.
    Current user is an administrator.
    Video Display Information:
    ATI RADEON XPRESS 200M
    Connected Device Information:
    DiskDrive, IC25N080ATMR04-0, Bus Type ATA, Bus Address [0,0]
    CDROM, PIONEER DVDRW DVR-K15, Bus Type ATA, Bus Address [0,0]
    CDROM, IVI Virtual CD SCSI CdRom Device, Bus Type SCSI, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    D: PIONEER DVDRW DVR-K15, Rev 1.11
    Data or MP3 CD in drive.
    Found 1 songs on CD, playing time 04:45 on CDROM media.
    Track 1, start time 00:02:00
    Get drive speed succeeded.
    The drive CDR speeds are: 4 10 16 20 24.
    The drive CDRW speeds are: 4.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.
    E: IVI Virtual CD, Rev 0.5a
    Drive is empty.
    Force Optical Power Calibration before burn is turned on in the preferences.
    The last failed data CD or DVD burn had error code 4251(0x0000109b). It happened on drive D: PIONEER DVDRW DVR-K15 on CDR media at speed 24X.
    Compaq Presario v2000   Windows XP  

    I guess the model number is V2414NR. Does that sound right?
    that's perfect. i found your downloads page at HP.
    although there's nothing there by way of firmware for the Pioneer drive that is throwing the error, there are a few other downloads of note:
    Software & Driver downloads: Compaq Presario V2414NR notebook PC (XP)
    check to see if your HP Notebook System BIOS is up to date.
    check to see if that AMD Processor Update for Microsoft Windows XP is relevant to your particular configuration of V2414NR. if so, check to see if you're up to date with that.
    check to see if your up to date on that IDE Controller Enhancement.
    check to see if your Graphics Driver for ATI Radeon Xpress 200M Chipset is up to date.
    once you're satisfied you're up to date, do you still get the 4251?
    (if no joy, we'll start checking on that virtual drive showing up in the diagnostics.)

  • Error 4251 when trying to burn

    I've had iTunes for years but just bought and downloaded an album, when I tried to burn I got error 4251. I tried burning three times but got the same error, any idea how to fix this?

    "I've had iTunes for years but just bought and downloaded an album, when I tried to burn I got error 4251. I tried burning three times but got the same error, any idea how to fix this?"
    I've seen multiple threads on this same error message. Since I'm very new to iTunes, I thought it was me or my PC, so I guess I'm relieved in a way to learn that this problem is being experienced even by long-time iTunes users.
    To me, this says that something in a recent release of iTunes is the culprit. What I don't know is if Apple will consider a problem that Windows users are having to be serious enough to investigate and fix.
    I actually thought I had a work-around. I went to edit/preferences/advanced/burning and changed to speed from the highest speed to 16X, and I managed to get 10 songs on a disc before it went 4251. I took the speed down to 6X, and got 12 songs. I went to 2X, and it went 4251 after 5 songs.
    So much for that work-around.

Maybe you are looking for