Burn failed: there was an error producing data for the burn

Getting the following message after trying to bounce a project to CD:
Burn Fail: There was an error producing data for the burn.
Using Logic Pro 9. Burn has worked with all projects up til now. Not sure what is different about this one. Still works with old projects. ANy ideas? Thanks.

Thanks very much for responding John, Minimum was to the CD. I have an Internal Superdrive. it does dvd and cd-rs. At this time, since my original post, I have burned four smallish rolls like 200 photos at 200+ MB's with success. And then I can try less say 100 photos @ 110MB and I get the error, and coaster that is unreadable. I have a partition area on another internal hard drive that I may try to transfer to so I can get these off my computer and maybe reinstall iPhoto. I will try to pop them into a folder and copy with Toast , which i use at times for other projects. I just like the idea of keeping all the rolls in order and not losing any of the data that is part of the originals. Any other ideas would be appreciated. The photos are sort of important.

Similar Messages

There was an error opening database for the library....

my latpop had a kernel panic wihile i was using aperture to impor pictures "that yes i have deleated off the memory card," shut down and restarted. upon restarting i was presented with this error...

there was an error opening database for the library....
what is ....? Is the path to your main Aperture library printed there, or is Aperture trying to open a different location? If it is a different location, launch Aperture on your correct library, by double clicking the library.
If it is indeed trying to open the correct library package, try if repairing and rebuilding the library with the "first aid tools" will help, see this manual page on how to do this:
Aperture 3 User Manual: Repairing and Rebuilding Your Aperture Library
If the problem persists, when trying to repair, check if there is a crash report and post the first 60 lines.
Regards
Léonie

Which version doesn't produce this error: "there was an error opening this document. the file is damanged and could not be repaired"?

This error message occasionally occurs with Acrobat 5 on XP 2. However the same files can be opened with Acrobat 6.0.4 on Win98(se2).
"There was an error opening this document. the file is damanged and could not be repaired."
I'd like ot upgrade 5 on my XP system, but have read many posts complaining about the same error with newer versions.
Is there a version that never produces this error on files that aren't actually damaged? And has anyone figured out what produces this error? (The posts I've seen suggest solutions that don't seem to work.)
Thanks.
Ellen

Thanks, Prasanth.
I've read posts about this problem happening on all versions, and wanted to see if it was least likely to happen in one version.
I just need the basic function - the ability to read a pdf file.
Of course, it seems to be a problem only for some, and there's no way of knowing the extent, so I will try an upgrade or two.
Ellen

I just updated my itune on my PC and now it doesn't start. There was no error in installing/upgrading the software but once I rebut the computer the icon appeared but it wouldn't start the program. Did I loose all my music and data?\

I just updated my itune on my PC and now it doesn't start. There was no error in installing/upgrading the software but once I rebut the computer the icon appeared but it wouldn't start the program. Did I loose all my music and data? How can I fix the problem? Thanks

Try this from MacFixIt as well:
In the case of drive directory damage or problems with permissions, the solution is usually to use Apple's Disk Utility to repair the disk. Of course, you won't be able to perform this operation normally (simply launching the Disk Utility application, located in Applications/Utilities, and initiating a disk repair) if your system will not startup. So two options exist:
* Insert your Mac OS X 10.4.x (Tiger) media (DVD or CD) and restart the computer while holding down the "C" key. Once the computer has booted from the installation disc, select "Utilities" from the menubar and open Disk Utility. Repair the disk, then quit Disk Utility and restart your system.
* Alternatively, you can repair the disk while booted in single user mode if you do not have access to a retail Mac OS X 10.4.x (Tiger) DVD/CD. To startup in single user mode, hold down the "Command" and "S" keys simultaneously at startup. Once properly booted, type the command fsck at the prompt. Repeat these process until no errors appear.

Hi, I have keep seeing a small 'Connection failed' warning box popping up: [[Connection failed There was an error connecting to the server "Warning; Self Aware"]]. Question for you gods - what does it mean. is it important? my computer connects to my

hi, I have keep seeing a small 'Connection failed' warning box popping up: [[Connection failed There was an error connecting to the server "Warning; Self Aware"]]. Question for you gods - what does it mean. is it important? my computer connects to my server works. Could it be related to "Network Preference & Monitor icons missing from my system preferences page? and my guest sign=in account is now the main account?? thanks you. jb

hi, I have keep seeing a small 'Connection failed' warning box popping up: [[Connection failed There was an error connecting to the server "Warning; Self Aware"]]. Question for you gods - what does it mean. is it important? my computer connects to my server works. Could it be related to "Network Preference & Monitor icons missing from my system preferences page? and my guest sign=in account is now the main account?? thanks you. jb

There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'.

HI
in sharepoint 2013 WFE servers event viewer i receive following error many times
Log Name: Application
Source: Microsoft-Windows-IIS-W3SVC-WP
Date: 4/14/2015 2:23:56 PM
Event ID: 2303
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: TSharepint2013.test.com
Description:
There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'. Some application services may not have been processed correctly. Please check the configuration for application
service auto-start for the application(s) assigned to this application pool. The data field contains the error code.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
<EventID Qualifiers="32768">2303</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-14T11:23:56.000000000Z" />
<EventRecordID>183840</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security />
</System>
<EventData>
<Data Name="ApplicationPool">SecurityTokenServiceApplicationPool</Data>
<Binary>02000780</Binary>
</EventData>
</Event>
adil

HI
in sharepoint 2013 WFE servers event viewer i receive following error many times
Log Name: Application
Source: Microsoft-Windows-IIS-W3SVC-WP
Date: 4/14/2015 2:23:56 PM
Event ID: 2303
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: TSharepint2013.test.com
Description:
There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'. Some application services may not have been processed correctly. Please check the configuration for application
service auto-start for the application(s) assigned to this application pool. The data field contains the error code.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
<EventID Qualifiers="32768">2303</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-14T11:23:56.000000000Z" />
<EventRecordID>183840</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security />
</System>
<EventData>
<Data Name="ApplicationPool">SecurityTokenServiceApplicationPool</Data>
<Binary>02000780</Binary>
</EventData>
</Event>
adil

There was an error opening this document. the file is damaged and could not

Dear all, I am simpley reading pdf file & producing to browser with this servlet
( which i got this from same forum)
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class Isotest2 extends HttpServlet
public void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, java.io.IOException
//String file = request.getParameter("file");
String file = new String("d:/xyz.pdf");
if (file != null)
File f = new File(file);
if (f.isDirectory())
//Do something that identifies the file as a directory...
} else
//otherwise, open a stram, and begin the download...
InputStream input = new FileInputStream(f);
response.setContentType("application/pdf");
response.setBufferSize(8192);
response.setHeader("Content-Disposition","attachment; filename=\"" + f.getName() + "\"");
OutputStream output = response.getOutputStream();
int count = -1;
byte[] buffer = new byte[8192];
while((count=input.read(buffer))!= -1)
output.write(buffer, 0, count-1);
output.close();
input.close();
but it is unable to open pdf file giving error
"There was an error opening this document. the file is damaged and could not be reapired"
what is the problem? [ PDF file is not damaged !]
pls help me out
thanks

Probably because you aren't writing the last byte read every time through the while loop.

HT5654 Just tried 3 times to update iTunes on my PC running Vista. There was an error. It stopped the installation. Now iTunes will not start at all. The error message tells me to reinstall which I tried but did not work. What should I do?

Just tried 3 times to update iTunes on my PC running Vista. There was an error. It stopped the installation. Now iTunes will not start at all. The error message tells me to reinstall which I tried but did not work. What should I do?

Hello, Jdragone.
Thanks for the question. Start with completely uninstalling iTunes and all of it's components in the order specified in the article below. Once this is done, download and install iTunes.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
"The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H.

Message'there was an error opening this document.The file cannot be found'

Using xp home and when I click to download the pdf file, it will give 3 options been 'open'/'save'/?. When I choose the 'open' option, it will give me the above message "there was an error opening this document.The file cannot be found"
owever if I choose to "save" and I will be able to open the file and read it. In this pc its using Adobe Reader 8.1.2 with a patch. It was working fine prior to this sudden occurance of the error.
Strangely I have another pc with the same specification, I was able to choose "open" and be able to read the file. Can anyone help to resolve the issue by using the "open' option instead of "save, then open". Greateful for your prompt response.

Fyi, in addition to my earlier post, the other pc is using Adobe 8.1.1 and no other patch. I was trying to find 8.1.1 version but could not find a trust worthy site to load from. Do you think the error caused by using the 8.1.2 version? Thanks

How to deal with "There was an error opening this document, the file is damaged and could not be"

Hello, everyone:
I open one pdf document with Adobe Reader 9.3, but it appeared that "There was an error opening this document, the file is damaged and could not be repaired".. and I found that another several pdf document in the same folder that I have not opened for a long time is also "damaged and could not be repaired".
But in the same folder, other documents of different types are ok, does that mean there is something wrong with my hard drive?
Has anyone else run into this issue or have any suggestions?
Thank you very much

It could be that the directory is damaged. It could be that at one time you had a virus that did damage, it is hard to say. Do you have a good backup?

Acrobat 11 there was an error opening this document. the file is damaged and could not be repaired

we are receiving an error when opening certain pdfs saying "there was an error opening this document. the file is damaged and could not be repaired"
i've tried a few things to fix this issue with no luck
tried on a brand new windows 7 install without any added software like anti-virus software, etc
tried on my home pc (I forwarded the document from my work pc to my home pc and still receiving the same error)
don't think it's anything related to the computers, thinking it's more an issue with the pdf. i've tried the basics like deleting temp files from IE, going to %temp% and deleting that out, doing an acrobat repair, trying in reader instead of acrobat, updating users from acrobat 10 to 11, and still receiving the same issue. the odd thing is, some people can open this document and some receive the error. the other thing is i've tried alternative pdf programs with no avail, same errors from those as well
i work on the helpdesk with one other person for the company and not sure what else we can try
don't think this is a pc issue - tried on pcs in the company, home pcs, personal pcs and all get this error
got to be an issue with either the pdf, or the way its being sent
i did reach out to OUR e-mail team here (lotus notes admin) and they've ruled out anything as far as an encryption causing the conflict may go, so notes isn't the issue either
would it be possible it's on the persons end that's sending the file?

Unfortunately, CR 10.5 is not supported on WIN 2012 Server. See this wiki for more details. In order to work in a supported environment you will have to upgrade to CR 2008 Service pack 7, or SAP Crystal Reports, developer version for Microsoft Visual Studio (2010 / 2012 / 2013).
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

"there was an error opening this document the root object is missing or invalid" adobe reader 9

I get the following message every time I try an open some of my saved PDF files in Adobe Reader 9
"there was an error opening this document. the root object is missing or invalid."
these files are not down loaded from a website, they are files I greated some time back and I have not opened in a while.
I am runing window XP and this dos not happen with all my PDF files.
can you help.
James

Sounds like the files are corrupt. Time to restore them from a good backup.

There was an error trying to get the status of the job. 1: The server returned an error processing CloseJob: Stack empty.

Hi
While trying to perform the operation 'Annul All Below' in DRM 11.1.2.1, I received the following error: There was an error trying to get the status of the job. 1: The server returned an error processing CloseJob: Stack empty.
Has anyone seen this error before, and does anyone know what the fix is?
Thanks,

Just giving my view on this.
When you try to restore a Version backup file, you get this error.
This is a known defect. The problem is caused by missing values in properties like AddedOn, AddedBy, which may occur when a version is copied with 'Clear Changed Properties' selected.
this is a known bug
but to workaround - Blend the affected version into a new, empty version, which will populate the 'ChangedOn' properties. You can then back up this version and it will restore.
Thanks,
~KKT~

Error saying "There was an error opening this document, the filename, directory name, or volume label syntax is correct"

At my work we uses Macs to prepare PDF’s and the create folders to archive and print them. Other areas of work use PC’s to review these PDF. When they go to review these folders there is a small black dot which appears under random characters in the folder name and when they try and open the file an error message saying “There was an error opening this document, the filename, directory name, or volume label syntax is correct”. On the PC they can delete the name and rename the folder and the error disappears. If anyone can shed some light on this it would be greatly appreciated. If I was to have a guess I think its most likely an error with character recognition between the MAC and PC. Any help would be great , thank you

See if this helps on the charachters...
http://averstak.tripod.com/fatdox/names.htm

Receive error: There was an error while copying to the Clipboard. An internal error occurred.

I receive the message "There was an error while copying to the Clipboard. An internal error occurred." when I highlight anything and copy to the clipboard. I've searched and found others with the same issue, but they were either on an older OS, Acrobat ver, or their issue was intermittent. My issue always occurrs and I cannot copy anything to the clipboard.
I'm running Win 7 Ultimate x64 SP1 and Acrobat Pro 9.4.4. Any suggestions would be appreciated.
Thanks,
RJ

Hi MelSchultz,
Thanks for your post. However, this Forum is meant to discuss
issues related to acrobat.com and not acrobat. To post an issue
related to acrobat please visit the acrobat forum :
http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/
You may also open a web case with Adobe Support. To do so,
please visit the following link :
https://www.adobe.com/cfusion/support/index.cfm?event=portal

Burn failed: there was an error producing data for the burn

Similar Messages

Maybe you are looking for