Burn Failure due to "laser level" being off: external drive

I have just recently purchased an Optorite USB 2.0 Slim DVD burner with capabilities of RW. I am using an iMac G4 with OS X (10.4.2). I usually use a D-Link USB Hub to connect several other things to my iMac because of the lack of USB ports located in the back of my dome. I was told by a rep. at Apple Support that there is probably a failure of either power or loss of power because it is going through my Hub. He suggested that I hardwire it to my iMac. I did so and the same message appeared. Something along the lines of calibration error due to laser level. He also said that if the external burner was not compatible with the iMac that I am using than it wouldn't recognize it as a drive or even pick it up on the system but I did some more research on my particular model and found out, according to Newegg.com that it is not supported by the Mac platform. I am confused as to what I need to do. If buying a new burner, one that is generally used for Macs then I will do so but I would like to ensure that it will not work whatsoever. I have been troubled by this compatibility issue for too long now and am willing to do whatever it takes to resolve the issue. I would so greatly appreciate any feedback there is on my problem. Thanks in advance for everyones consideration and time spent helping me out.

I have the superdrive that came with my imac and I get the exact same error message when trying to burn a CD. It reads and burns dvds, and reads cds, but that's it. Will not burn any CD's due to the "calibration of the laser". Any ideas anyone?

Similar Messages

How can I restore my library that was erased off external drive....

I just accidently erased 90% of my itunes library that was reading off an external drive. The last 10% was recently purchases music that I downloaded directly to my laptop hard drive and remains intact (makes sense?). Basically I wiped out the external drive that my 90% library read to.
I was able uncover hidden files off my ipod and inturn copy my library back to the external drive but the big question is - is there a way to restore all this without having to start over Itunes? Can I reimport it off the external drive from the ipod copyover? One thing I can't do is copy it back onto the laptop hard drive because there's nowhere near enough space. Thanks for you help!

OK first thing you might want to do is read this post of mine from the other day...
http://discussions.apple.com/thread.jspa?messageID=6296361&#6296361
because, well I am too lazy to type much of it again.
But the part that really is for you is about half way down, just above the link where it starts with "If it was me, " which is what you want to do. In your case, you would use the "Add to library..." command twice. Once to add all the files from the external, and then again to grab all the ones off the internal, if you want everything located in one location. You can then remove the ones from your internal AFTER you verify that they made it to the external ok.
As noted in that post at the end, but worth repeating, doing it with that method keeps everything all together (database files, media files, etc) in a single folder for your library rather than your database files on the internal and your media on the external or spread across both drives. If you ever need to move the library or want to use your library on other computers, you can simply move the folder or the entire drive and use the above instructions to open your library.
Patrick

How to run iphoto 08 off external drive?

Hi - I'm trying to clear space on my 60 gig power book g4 and was wondering if I can run iphoto off an external drive (where I would house many - but not all - photos). Currently, copying the photos to the drive loses all the iphoto info. Thanks for any help - and I'm open to suggestions as to other methods to clear off hard drive. (Have the same with itunes - I lose all the info when I "copy" files to the external drive). Thanks!

Quit iPhoto and drag your iPhoto library to the external drive (just one big drag - do not drag components)
Then launch iPhoto while depressing the option (alt) key and point use the select library option to point to the external drive - verify your library on the external drive by using it for a while and then you can delete the iPhoto library on your internal drive or you can switch back to it and delete some photos by using iPhoto to move them to the iPhoto trash and emptying the iPhoto trash
DO NOT delete photos or otherwise modify your iPhoto Library using the finder or you will corrupt your library and lose data
You may find that iPhoto library manager is useful in managing multiple libraries - http://www.fatcatsoftware.com/iplm/
LN

Powering off external drive (G4 tower)

I am ready to connect my G4 tower to my eMac as an external hard drive (thanks to several of you!).
I read on another forum that when turning off or unplugging an external drive, you must first drag the Desktop icon of the drive to the Trash to unmount it, as suddenly disconnecting or turning off a mounted drive can cause data damage.
Here's my question: the G4 tower is plugged into a surge protector as is the eMac. Is it safe for me to simply shut down the eMac (without unmounting the G4) and then turn off the surge protector? Or must I unmount the external drive every time?

Niel wrote:
Is it safe for me to simply shut down the eMac (without unmounting the G4)
Yes. When the computer is shut down from the Apple menu, AppleScript, or Terminal, the drives are automatically unmounted. This isn't the case during a forced shutdown or restart, such as unplugging the machine or on some Macs, holding down the power button.
Thank you. What do I need to do if I must do a forced shutdown or restart?

Turned-off external drives remain active and spin ...any risk?

I have several USB-hard-disks connected via USB-hub to my MacBook. The power for each drive can be turned on individually. I noticed that drives are still spinning though power has been turned off (but they don't mount on the desktop). So I guess that the drives draw current via the USB-contacts. Set aside the point of wasting electric energy is there a true risk for the USB-hub or even worse - what happens if I connect a turned off drive directly to the MacBook ... is it "just" sucking some energy or is this stressing the units involved?

Hi Michael,
Thanks for your input on this. I went through several steps, including most of the ones you recommended, and came upon what seems to be the problem (knock on wood).
My editing setup is one MacPro, 4 G-Raid drives, and one Sony DSR-11 digital video deck. After clearing up more space the G-Raid drives to bring them to about 10% free space, things seemed to be running smoother - there were less crashes within FCP. However, I was still getting crashes on opening FCP, at the same "splash screen" point (after all the AE Effects and Video Effects had loaded).
Running Disk Utility on all drives showed no problems, and unfortunately I don't have DiskWarrior (though that may be an upcoming purchase).
It wasn't until I went through your suggestion of starting FCP with the individual drives connected that I got somewhere. FCP would start up fine with one or even two drives connected, but not with three or four. Doing a little research on that brought me to two threads on Creative Cow about G-Raid drives and daisy-chaining:
http://forums.creativecow.net/thread/176/856609
http://forums.creativecow.net/thread/176/856570
Once I put two of the drives onto the rear FireWire800 port, and two of the drives into the front FireWire800 port, with the DSR-11 still in the back FireWire 400 port, my problems disappeared. Huzzah! The G-Raid folks recommend no more than three FireWire devices connected at a time, and lightening the load on the FireWire port by uncoupling the four-drive long daisy-chain has immediately helped. Now, I'll keep an eye on it, and may potentially buy a PCI card if something goes wonky again, but I am very happy to have gotten things up and running again. Cheers!

[svn:osmf:] 13558: Fixing element removal failure due to ParallelDisplayObject trait not being able to resolve media element from view trait .

Revision: 13558
Revision: 13558
Author:   [email protected]
Date:     2010-01-17 10:18:44 -0800 (Sun, 17 Jan 2010)
Log Message:
Fixing element removal failure due to ParallelDisplayObject trait not being able to resolve media element from view trait. Extended TraitAggregatorEvent to include to media element so resolving is no longer required.
Modified Paths:
    osmf/trunk/framework/MediaFramework/org/osmf/composition/ParallelDisplayObjectTrait.as
    osmf/trunk/framework/MediaFramework/org/osmf/composition/TraitAggregationHelper.as
    osmf/trunk/framework/MediaFramework/org/osmf/composition/TraitAggregator.as
    osmf/trunk/framework/MediaFramework/org/osmf/composition/TraitAggregatorEvent.as

Logon failure due to an internal error-webi client tool

Hi experts,
I've installed WebI client tool 4.0, when I trying to logon this message appear: Logon failure due to an internal error,
this problem has been addressed before, but could not be resolved [http://forums.sdn.sap.com/thread.jspa?messageID=10751144#10751144|http://forums.sdn.sap.com/thread.jspa?messageID=10751144#10751144]
there is a way to solve this problem?
regards,
Jonathan.

In a Unix environment the version is in the file “AddorRemoveProduct.sh” located in the installation folder of BI4.x
For the updated reference table of the versions / builds and corresponding patch levels, please see KB article # 1602088
BI 4.0 RTM
14.0.0.760
Patch 04
14.0.0.904
Patch 05
14.0.0.918
Patch 06
14.0.0.940
Patch 07
14.0.0.954
Patch 08
14.0.0.970
Patch 09
14.0.0.986
Patch 10
14.0.0.996
Support Pack 1
14.0.1.287
Patch 1.1
14.0.1.313
Patch 1.2
14.0.1.330
Patch 1.3
14.0.1.342
Patch 1.4
14.0.1.360
Patch 1.5
14.0.1.375
Patch 1.6
14.0.1.397
Support Pack 2
14.0.2.364
Patch 2.1
14.0.2.388
Patch 2.2
14.0.2.397
Patch 2.3
14.0.2.416
Patch 2.4
14.0.2.439
Patch 2.5
14.0.2.455
Patch 2.6
14.0.2.481
Patch 2.7
14.0.2.508
Patch 2.8
14.0.2.532
Patch 2.9
14.0.2.556
Patch 2.10
14.0.2.565
Patch 2.11
14.0.2.594
Patch 2.12
14.0.2.619
Patch 2.13
14.0.2.641
Patch 2.14
14.0.2.657
Patch 2.15
14.0.2.682
Patch 2.16
14.0.2.703
Feature Pack 3
14.0.3.613
Patch 3.1
14.0.3.630
Patch 3.2
14.0.3.657
Patch 3.3
14.0.3.678
Patch 3.4
14.0.3.691
Please note that at today FP03 is in RampUp

Logon failure due to an internal error

Hi,
We have installed XI 3.1 SP3 (plus fixpacks) on a server and I am trying to access Web Intelligence on the client machine. I get the error "Logon failure due to an internal error." Any ideas what the problem may be?
I can login into Web Intelligence when on the server directly using remote desktop. I am on SP3 on the client machine but may not be on the same level for fixpacks - will check. Could that be the problem?
I can access the CMC from the client machine.
Thanks

Hi All,
I'll start by describing the basic logon connections made by all the client tools when connecting to a Business Objects CMS. From this hopefully it will help resolve the kind of issues described here.
------------------Background------------------
The CMS has a port number (6400). This port number is actually the port number of the name server. This name server stores the name, type of server, hostname and port for all the BusinessObjects servers that exist in the cluster. Whenever a program (such as a client tool) needs to know how to connect to a particular server, the name server will reply with the hostname (or IP) and port number to connect to. When each Business Objects server process starts it will register with the name server and tell it what its connection info (hostname and port) are.
In the case of a client logon it will first connect to the name server and then request the information to connect to the CMS service - (note that the name server and the CMS service are two logicial and seperate functions that the CMS process performs). The CMS service actually runs on the request port of the CMS.
------------------Cause of Logon Failures------------------
If you have no explicitly configured it, the hostname returned for connection could be the fully qualified name OR the short hostname of the machine and the port number will be random (and change each time the process is started). The client ALSO needs to be able to connect to the hostname and port returned by the name server to continue processing. If it can't then you will receive a logon error - in designer/desktop intelligence this will appear as a 'Transport Communication Error' in the deatils of the error message.
------------------Example------------------
You initially connect to boeserver.mycomp.com:6400. boeserver.mycomp.com is a DNS name that the client computer can resolve and the port 6400 is open through the firewall. The client connects to the name server (within the CMS process) and requests the connection information for the CMS services but these have not been explicitly set in the CMC->Server->CMS->Properties page.
The response from the nameserver might be to connect to the short name of the host: boeserver on port 54393 (or some other random port number). You will get a logon error if EITHER the hostname boeserver cannot be resolved (which can be quite common when the boeserver machine is in a different subnet) OR there is a firewall blocking the connection port (54393 in this case).
------------------Resolution------------------
Go to the CMC->Server->CMS->Properties page. Here there is a section where you can specify the hostname with with each business objects server will give as the hostname (or IP address) and port (request port) that it can be contacted on. In the example below I have said that it should be contacted on the fullyqualified name and on port 6401. Again 6401 would need to be open through the firewall.
No two servers can have the same request port. As you can see in the screenshot I have specified to connect to the CMS service on 6401 using the fullyqualified hostname boeserver.mycomp.com and finally that the name server port is the default 6400.
As mentioned previously there may be also other BOE servers that similar settings are required for, depending on the actions you are performing - e.g. IDT and designer need access to the input file repository server to input/export universes, WebiRich Client also should have access to the Output File Repository Server. Client tools should also have access to the Adaptive Processing Server that is running the Client Auditing Proxy Service so that any actions are audited.
One extra thing that can cause a block on the port number, other than a regular corporate firewall is the security on the server machine itself (e.g. the Windows firewall on the server can block incoming requests if there is not an expection created.
Regards,
Graham

Error msg: device failed to calibrate laser level

I am trying to burn a dvd using disk utility and it gives me the error message burn failed: device failed to calibrate laser level.
I can't burn with toast titanium either-gives me medium error message
Should I try different DVD-Rs? I am currently trying to use Maxells.
thanks,
John

Do a search "error 0x8002006D" in discussions. You will see you are not alone in this pesky problem.

Burn failures in iDVD

I'm getting a very high rate of burn failures with iDVD. When I create a DVD the program rattles thru its various tasks but when it comes to 'burning' the drive keeps revving up but fails to 'get going' - after about half a dozen attempts the disc ejects and the comment is that 'errors were found...' (or words to that effect).
I'll re-do the project and maybe it'll work and maybe it wont - its frighteningly random. Tried different discs - that doesn't appear to be the deciding factor. But once a disc has failed there are no signs of 'burn' on it and yet it will be useless... With a success rate of less than 50% its getting to be quite expensive!

Thanks for the response to my iDVD problem.
I did as you suggested and created a disk image of the project - tried to open it with DVD player but it couldn't see it. I quickly made disk images of DVD projects that had been successful but they weren't seen by the player either - perhaps I misunderstood that particular part of the scenario.
Anyway, I re-created the project with a newly-made file and it worked fine - but as I said - its all fairly random and success rates are low.
My projects are always created in FCP5. I use DVD-R's - the last batch being 16x.
I don't use MP3's because they still don't work properly in FCP so I don't think the problem lies there.
Any other suggestions gratefully received.

Redwood showing as failure (error) despite the loads being successful in BW

When a particular DTP step fails due to data issue we can make the overall status green manually thus pushing the chain further. Whereas in Redwood side this is showing as failure (error) despite the loads being successful in BW Side.

Hi Ramesh,
Is this for a process chain triggered from CPS or triggered in BW (see also your other question regarding interception/monitoring of BI process chains) ?
If the process chain is triggered from CPS, the control is assumed to be at CPS so the restart should be done from CPS as well.
Regards,
Anton.

When I boot up the iphone 5s after it being off it will load then as soon as it gets to the lock screen it goes to sleep right away it will show me the lock screen for a second if that

When I turn on the iphone 5s after it being off it will load then show me the lock screen for a second if that and then go right to sleep mode right away as soon as the lock screen comes on

Hi Apple user 789,
Welcome to the Support Communities!
The following article will provide some troubleshooting steps for your iPhone.
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If that does not resolve the issue, refer to page 146 in the iPhone User Guide to Reset All Settings:
iPhone User Guide for iOS 7
manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
The final troubleshooting step would be to restore your device:
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition. Before restoring:
Verify that you are using the latest version of iTunes.
Back up your device.
Transfer and sync content to your computer.
I hope this information helps ....
Happy Holidays!
- Judy

Install failure due to "faulty DVD" problem: only with Family Pack?

After going through a few threads on the subject of installation failure due to tbe pseudo-faulty DVD, I have the impression that many users mention that they were using a Family Pack install DVD or in one case a "drop in". The former is my case. Please post if you have had this problem with Leopard install, and whether you were using a single licence, family pack or drop in. It's just a hunch, but perhaps this problem only affects a specific set of disks.

I believe that they are holding back on sending a new DVD until they know why there were defective ones. I read somewhere that they require a new SKU so that they will actually be a separate batch.
Can you borrow a DVD from anyone to install Leopard? You certainly would be allowed to legally do that. I am surmising that Apple is overloaded with requests for a replacement DVD and really want to make sure it works. You know that old thing about "fool me once..."
Stuff happens - but with Leopard, a lot of stuff sure happened at once. They sold 2 million DVDs. If only 5% have problems, that's a lot of problems to deal with, one at a time.
In time it will sort itself out, but in the meantime the rooms are full of smoke

I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?

I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?

If the external drive can be seen at all in Disk Utility, follow the instructions for repair here.

ETL Failure Due to Failure of a Task

Hi All,
I am getting ETL failure due to failure of a task, sporadically. Also, when i re-run the ETL, the ETL completed successfully.
I have copied the informatica session log file.
DIRECTOR> VAR_27027 Use default value [0] for user-defined workflow/worklet variable:[$$passInStatus].
DIRECTOR> VAR_27028 Use override value [DataWarehouse] for session parameter:[$DBConnection_OLAP].
DIRECTOR> VAR_27028 Use override value [SEBL_80] for session parameter:[$DBConnection_OLTP].
DIRECTOR> VAR_27028 Use override value [1] for mapping parameter:[$$DATASOURCE_NUM_ID].
DIRECTOR> VAR_27028 Use override value [] for mapping parameter:[$$Hint1].
DIRECTOR> VAR_27028 Use override value [] for mapping parameter:[$$Hint2].
DIRECTOR> TM_6014 Initializing session [VisibilityActivityParty_Full] at [Wed Aug 17 00:31:31 2011]
DIRECTOR> TM_6683 Repository Name: [Oracle_BI_DW_Base]
DIRECTOR> TM_6684 Server Name: [Oracle_BI_DW_Base_Integration_Service]
DIRECTOR> TM_6686 Folder: [SDE_SBL_80_Adaptor]
DIRECTOR> TM_6685 Workflow: [VisibilityActivityParty_Full]
DIRECTOR> TM_6101 Mapping name: VisibilityActivityParty [version 1]
DIRECTOR> TM_6827 [D:\Informatica\PowerCenter8.1.1\server\infa_shared\Storage] will be used as storage directory for session [VisibilityActivityParty_Full].
DIRECTOR> CMN_1802 Session recovery cache initialization is complete.
DIRECTOR> TM_6703 Session [VisibilityActivityParty_Full] is run by 32-bit Integration Service [node01_sb8anaprd], version [8.1.1 SP5], build [0822].
MANAGER> PETL_24058 Running Partition Group [1].
MANAGER> PETL_24000 Parallel Pipeline Engine initializing.
MANAGER> PETL_24001 Parallel Pipeline Engine running.
MANAGER> PETL_24003 Initializing session run.
MAPPING> CMN_1569 Server Mode: [ASCII]
MAPPING> CMN_1570 Server Code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
MAPPING> TM_6151 Session Sort Order: [Binary]
MAPPING> TM_6156 Using LOW precision decimal arithmetic
MAPPING> TM_6180 Deadlock retry logic will not be implemented.
MAPPING> TM_6307 DTM Error Log Disabled.
MAPPING> TE_7022 TShmWriter: Initialized
MAPPING> DBG_21075 Connecting to database [obieeprd], user [OLAP]
MAPPING> DBG_21474 Warning: Update Strategy transform [UPDTRANS] is disabled. Set session type to [Data Driven] to enable it.
MAPPING> TM_6007 DTM initialized successfully for session [VisibilityActivityParty_Full]
DIRECTOR> PETL_24033 All DTM Connection Info: [<NONE>].
MANAGER> PETL_24004 Starting pre-session tasks. : (Wed Aug 17 00:31:31 2011)
MANAGER> PETL_24027 Pre-session task completed successfully. : (Wed Aug 17 00:31:31 2011)
DIRECTOR> PETL_24006 Starting data movement.
MAPPING> TM_6660 Total Buffer Pool size is 36000000 bytes and Block size is 65536 bytes.
READER_1_1_1> DBG_21438 Reader: Source is [SB8PRD], user [SIEBEL]
READER_1_1_1> BLKR_16003 Initialization completed successfully.
WRITER_1_*_1> WRT_8146 Writer: Target is database [obieeprd], user [OLAP], bulk mode [ON]
WRITER_1_*_1> WRT_8106 Warning! Bulk Mode session - recovery is not guaranteed.
WRITER_1_*_1> WRT_8397 Appending output data to file [D:\Informatica\PowerCenter8.1.1\server\infa_shared\BadFiles\w_act_party.bad] (initial size [717]).
WRITER_1_*_1> WRT_8124 Target Table W_ACT_PARTY :SQL INSERT statement:
INSERT INTO W_ACT_PARTY(INTEGRATION_ID,DATASOURCE_NUM_ID,ETL_PROC_WID,TABLE_WID,ACTIVITY_ID,PARTY_ID) VALUES ( ?, ?, ?, ?, ?, ?)
WRITER_1_*_1> WRT_8124 Target Table W_ACT_PARTY :SQL UPDATE statement:
UPDATE W_ACT_PARTY SET ETL_PROC_WID = ?, ACTIVITY_ID = ?, PARTY_ID = ? WHERE INTEGRATION_ID = ? AND DATASOURCE_NUM_ID = ? AND TABLE_WID = ?
WRITER_1_*_1> WRT_8124 Target Table W_ACT_PARTY :SQL DELETE statement:
DELETE FROM W_ACT_PARTY WHERE INTEGRATION_ID = ? AND DATASOURCE_NUM_ID = ? AND TABLE_WID = ?
WRITER_1_*_1> WRT_8270 Target connection group #1 consists of target(s) [W_ACT_PARTY]
WRITER_1_*_1> WRT_8003 Writer initialization complete.
READER_1_1_1> BLKR_16007 Reader run started.
READER_1_1_1> RR_4029 SQ Instance [SQ_S_ACT_EMP] User specified SQL Query [SELECT
     AEMP.ROW_ID,
     AEMP.ACTIVITY_ID,
     U.PAR_ROW_ID
FROM
     V_ACT_EMP AEMP,
     S_USER U
WHERE
     AEMP.EMP_ID = U.ROW_ID]
READER_1_1_1> RR_4049 SQL Query issued to database : (Wed Aug 17 00:31:32 2011)
WRITER_1_*_1> WRT_8005 Writer run started.
WRITER_1_*_1> WRT_8158
*****START LOAD SESSION*****
Load Start Time: Wed Aug 17 00:31:32 2011
Target tables:
W_ACT_PARTY
READER_1_1_1> RR_4050 First row returned from database to reader : (Wed Aug 17 00:31:32 2011)
LKPDP_1> DBG_21097 Lookup Transformation [LKP_W_ACT_PARTY]: Default sql to create lookup cache: SELECT ETL_PROC_WID,INTEGRATION_ID,TABLE_WID,DATASOURCE_NUM_ID FROM W_ACT_PARTY ORDER BY INTEGRATION_ID,TABLE_WID,DATASOURCE_NUM_ID,ETL_PROC_WID
LKPDP_1> TE_7212 Increasing [Index Cache] size for transformation [LKP_W_ACT_PARTY] from [1048576] to [1050000].
LKPDP_1> TM_6660 Total Buffer Pool size is 609824 bytes and Block size is 65536 bytes.
LKPDP_1:READER_1_1> DBG_21438 Reader: Source is [obieeprd], user [OLAP]
LKPDP_1:READER_1_1> BLKR_16003 Initialization completed successfully.
LKPDP_1:READER_1_1> BLKR_16007 Reader run started.
LKPDP_1:READER_1_1> RR_4049 SQL Query issued to database : (Wed Aug 17 00:31:32 2011)
LKPDP_1:READER_1_1> BLKR_16019 Read [0] rows, read [0] error rows for source table [LKP_W_ACT_PARTY{{DSQ}}] instance name [LKP_W_ACT_PARTY{{SRC}}]
LKPDP_1:READER_1_1> BLKR_16008 Reader run completed.
LKPDP_1:TRANSF_1_1> DBG_21682 Lookup table row count : 0
LKPDP_1:TRANSF_1_1> DBG_21297 Lookup cache row count : 0
LKPDP_1:TRANSF_1_1> DBG_21294 Lookup cache creation completed : (Wed Aug 17 00:31:32 2011)
LKPDP_1:TRANSF_1_1> CMN_1671 Created new cache files PMLKUP12190_9W32.[dat/idx] in directory D:\Informatica\PowerCenter8.1.1\server\infa_shared\Cache for Lookup [LKP_W_ACT_PARTY].
LKPDP_1:TRANSF_1_1> DBG_21641 LKP_W_ACT_PARTY: Index cache size = [1050000], Data cache size = [2097152]
LKPDP_1:TRANSF_1_1> DBG_21216 Finished transformations for Source Qualifier [LKP_W_ACT_PARTY{{DSQ}}]. Total errors [0]
TRANSF_1_1_1> CMN_1079 WARNING: Lookup table contains no data.
TRANSF_1_1_1> DBG_21524 Transform : LKP_W_ACT_PARTY
TRANSF_1_1_1> DBG_21313 Lookup table : W_ACT_PARTY
TRANSF_1_1_1> DBG_21562 WARNING : Output rows from LKP_W_ACT_PARTY will be the default port value
LKPDP_2> DBG_21097 Lookup Transformation [LKP_ETL_PROC_WID]: Default sql to create lookup cache: SELECT ETL_PROC_WID,ROW_WID FROM W_PARAM_G ORDER BY ROW_WID,ETL_PROC_WID
LKPDP_2> TE_7212 Increasing [Index Cache] size for transformation [LKP_ETL_PROC_WID] from [1048576] to [1050000].
LKPDP_2> TM_6660 Total Buffer Pool size is 609824 bytes and Block size is 65536 bytes.
LKPDP_2:READER_1_1> DBG_21438 Reader: Source is [obieeprd], user [OLAP]
LKPDP_2:READER_1_1> BLKR_16003 Initialization completed successfully.
LKPDP_2:READER_1_1> BLKR_16007 Reader run started.
LKPDP_2:READER_1_1> RR_4049 SQL Query issued to database : (Wed Aug 17 00:31:32 2011)
LKPDP_2:READER_1_1> BLKR_16019 Read [0] rows, read [0] error rows for source table [LKP_ETL_PROC_WID{{DSQ}}] instance name [LKP_ETL_PROC_WID{{SRC}}]
LKPDP_2:READER_1_1> BLKR_16008 Reader run completed.
LKPDP_2:TRANSF_1_1> DBG_21682 Lookup table row count : 0
LKPDP_2:TRANSF_1_1> DBG_21297 Lookup cache row count : 0
LKPDP_2:TRANSF_1_1> DBG_21294 Lookup cache creation completed : (Wed Aug 17 00:31:32 2011)
LKPDP_2:TRANSF_1_1> CMN_1671 Created new cache files PMLKUP12190_10W32.[dat/idx] in directory D:\Informatica\PowerCenter8.1.1\server\infa_shared\Cache for Lookup [LKP_ETL_PROC_WID].
LKPDP_2:TRANSF_1_1> DBG_21641 LKP_ETL_PROC_WID: Index cache size = [1050000], Data cache size = [2097152]
LKPDP_2:TRANSF_1_1> DBG_21216 Finished transformations for Source Qualifier [LKP_ETL_PROC_WID{{DSQ}}]. Total errors [0]
TRANSF_1_1_1> CMN_1079 WARNING: Lookup table contains no data.
TRANSF_1_1_1> DBG_21524 Transform : LKP_ETL_PROC_WID1
TRANSF_1_1_1> DBG_21313 Lookup table : W_PARAM_G
TRANSF_1_1_1> DBG_21562 WARNING : Output rows from LKP_ETL_PROC_WID1 will be the default port value
WRITER_1_*_1> WRT_8167 Start loading table [W_ACT_PARTY] at: Wed Aug 17 00:31:32 2011
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> WRT_8229 Database errors occurred:
ORA-01400: cannot insert NULL into (ETL_PROC_WID)
Database driver error...
Function Name : Execute Multiple
SQL Stmt : INSERT INTO W_ACT_PARTY(INTEGRATION_ID,DATASOURCE_NUM_ID,ETL_PROC_WID,TABLE_WID,ACTIVITY_ID,PARTY_ID) VALUES ( ?, ?, ?, ?, ?, ?)
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> WRT_8425 ERROR: Writer execution failed.
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> WRT_8114
Row # [1] in bad file
WRITER_1_*_1> CMN_1053 : Rowdata: ( RowType=0(insert) Src Rowid=1 Targ Rowid=1
INTEGRATION_ID (INTEGRATION_ID:Char.30:): "1-B8THY"
DATASOURCE_NUM_ID (DATASOURCE_NUM_ID:Double:): "1.000000000000000"
ETL_PROC_WID (ETL_PROC_WID:Double:): "(NULL)"
TABLE_WID (TABLE_WID:Double:): "68.00000000000000"
ACTIVITY_ID (ACTIVITY_ID:Char.15:): "1-N8FBX"
PARTY_ID (PARTY_ID:Char.15:): "0-1"
WRITER_1_*_1> WRT_8164 Error loading into target [W_ACT_PARTY] : Bad rows exceeded Session Threshold [1]
WRITER_1_*_1> WRT_8333 Rolling back all the targets due to fatal session error.
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> CMN_1022 Database driver error...
CMN_1022 [
ORA-24795: Illegal ROLLBACK attempt made
Database driver error...
Function Name : Commit
Database driver error...
Function Name : Rollback]
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> WRT_8183 Rollback failed for the target [W_ACT_PARTY]
WRITER_1_*_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
WRITER_1_*_1> WRT_8080 Writer run terminated. [Error loading data and error threshold reached]
WRITER_1_*_1> WRT_8168 End loading table [W_ACT_PARTY] at: Wed Aug 17 00:31:32 2011
WRITER_1_*_1> WRT_8035 Load complete time: Wed Aug 17 00:31:32 2011
LOAD SUMMARY
============
WRT_8036 Target: W_ACT_PARTY (Instance Name: [W_ACT_PARTY])
WRT_8038 Inserted rows - Requested: 488 Applied: 0 Rejected: 1 Affected: 0
WRITER_1__1> WRT_8043 ****END LOAD SESSION*****
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [W_ACT_PARTY] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [UPDTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [UPDTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [FILTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [FILTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [LKP_ETL_PROC_WID] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [LKP_ETL_PROC_WID] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [EXPTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [EXPTRANS] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [SQ_S_ACT_EMP] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [SQ_S_ACT_EMP] encountered fatal error. Terminating session.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Wed Aug 17 00:31:32 2011]
TRANSF_1_1_1> TM_6085 The transformation [SQ_S_ACT_EMP] encountered fatal error. Terminating session.
TRANSF_1_1_1> DBG_21511 TE: Fatal Transformation Error.
MANAGER> PETL_24031
***** RUN INFO FOR TGT LOAD ORDER GROUP [1], CONCURRENT SET [1] *****
Thread [READER_1_1_1] created for [the read stage] of partition point [SQ_S_ACT_EMP] has completed: Total Run Time = [0.656254] secs, Total Idle Time = [0.390627] secs, Busy Percentage = [40.476246].
Thread [TRANSF_1_1_1] created for [the transformation stage] of partition point [SQ_S_ACT_EMP] has completed: Total Run Time = [0.562504] secs, Total Idle Time = [0.406252] secs, Busy Percentage = [27.777928].
Thread [WRITER_1_*_1] created for [the write stage] of partition point [W_ACT_PARTY] has completed. The total run time was insufficient for any meaningful statistics.
MANAGER> PETL_24005 Starting post-session tasks. : (Wed Aug 17 00:31:33 2011)
MANAGER> PETL_24029 Post-session task completed successfully. : (Wed Aug 17 00:31:33 2011)
MAPPING> TE_7216 Deleting cache files [PMLKUP12190_9W32] for transformation [LKP_W_ACT_PARTY].
MAPPING> TE_7216 Deleting cache files [PMLKUP12190_10W32] for transformation [LKP_ETL_PROC_WID].
MAPPING> TM_6018 Session [VisibilityActivityParty_Full] run completed with [0] row transformation errors.
MANAGER> PETL_24002 Parallel Pipeline Engine finished.
DIRECTOR> PETL_24013 Session run completed with failure.
DIRECTOR> TM_6022
SESSION LOAD SUMMARY
================================================
DIRECTOR> TM_6252 Source Load Summary.
DIRECTOR> CMN_1740 Table: [SQ_S_ACT_EMP] (Instance Name: [SQ_S_ACT_EMP])
     Output Rows [50592], Affected Rows [50592], Applied Rows [50592], Rejected Rows [0]
DIRECTOR> TM_6253 Target Load Summary.
DIRECTOR> CMN_1740 Table: [W_ACT_PARTY] (Instance Name: [W_ACT_PARTY])
     Output Rows [0], Affected Rows [0], Applied Rows [0], Rejected Rows [1]
DIRECTOR> TM_6023
===================================================
DIRECTOR> TM_6020 Session [VisibilityActivityParty_Full] completed at [Wed Aug 17 00:31:33 2011]
Can some one help me to debug the issue please ?
Thanks

Hi Nat,
Thanks a lot for your response.
I am running this ETL task from DAC. This task is a part of Daily Full load ETL. As i mentioned earlier, this task fails sporadically and failing till now. After restarting the ETL, it gets completed.
Please let me know if you have any question.
Thanks,
Neeraj

Burn Failure due to "laser level" being off: external drive

Similar Messages

Maybe you are looking for