Burn iso doesn't work.

Hi,
I did download the 4 files iso.zip for me to upgrade from solaris 9 to solaris 10. I am using nero to burn. Before burning I did unzip them. whenever I unzip, it creates a file like xxx.iso.iso. I did put it into my 220R sparc machine and keeps on me sending a message like bad magic number. I did download twice, and burned twice also. Anybody has any ideas ? when I burned I used the create a bootable disk, I boot the machine as boot cdrom . I appreciate any help. thanks .
./tunin/.

You never know what a GUI interface does, and wat each option means. Perhaps your burning software goes wrong.
For example, you don't have to specify a boootable CD for a CD-Image, because "image" means what it says - a complete image of CD with all the boot sectors, and alike.
You already have an ISO image. Why use graphics software anyway? Just put the image as is onto a CD.
This is doe easily with a text mode command cdrw.
It is more complex but more precise.
Run man cdrw to read how to use it.
Please report back of any luck

Similar Messages

  • Caps lock burn keyboard doesn't work

    Hey guys,
    do you know what is wrong with my macbook (MAC OS X,10.6.6) the key caps lock burn and it won't to turn off and the all keyboards doesn't work?
    Is it possible that that caps lock and this problem with all keys are connected,  keyboard doesn't work from when this caps lock burn. ?.
    I dont know what to do...
    do you know?
    Thank a lot for some advance!
    m.

    Hey reandel,
    I'd check out the recommended troubleshooting steps within the following document:
    One or more keys on the keyboard do not respond
    http://support.apple.com/kb/TS1381
    Welcome to Apple Support Communities!
    Best,
    Delgadoh

  • Preview of Ken Burns effect doesn't work with some pictures

    I just recently installed a new graphics card (ATI Radeon 7500) on my Sawtooth, 1.2 GHz, so I could utilize the Ken Burns effect in imovie HD. It works but only partly. It works great but with some pictures the preview pane doesn't show the photo. What I see is a what looks like bad reception on an old TV (fuzzies and the picture is distorted so bad you can't even make it out). With other pictures the preview shows up fine. I'm sure I've loaded the drivers. What else can I do?

    Hi Tonyy13.
    I am presenting the same problem. I can set the Ken Burns' effect while I am with the pictures before placing them in the Clip or Timeframe viewer. After placing them there, if I try to edit the picture (either by right clicking and choosing -edit picture or by control clicking and doing the same, I ended up with a black background. If you change the setting in this black ackground and update this changes they will be effective. So, you can change the slide duration, and everything in the sliders but without an image.
    I was running System 10.3.9 and I thought this was the reason. Today, I went and bought Tiger but it didn't sove the problem. I do believe it is a bug in the program. According to Apple's Help and David Pogue's "The Missing Manual" this shouldn't happen.
    If you solve this problem reply to this posting. If I did I will reply to your posting. Thank You.

  • Burning CDs doesn't work?

    Burn settings are on Audio/max speed possible, with iTunes 8 for Windows. Using TDK CD-R discs. Verified that the CD device both reads & writes using other media and CDs. iTunes command to Burn Disc works fine, full disc burns, is "finished." But then -- the new CD won't play anywhere -- not in Windows Media, not on another CD player. It doesn't even show as having anything on it in Windows Explorer, and a straight CD player can't find any tracks. It plays just fine in iTunes, though, and shows all the tracks. Anybody?

    Hello,
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.
    Might try Burn.app...
    http://burn-osx.sourceforge.net/Pages/English/home.html
    Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
    Then move these files to the Desktop for now...
    /Users/YourUserName/Library/Preferences/com.apple.finder.plist
    /Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
    /Users/YourUserName/Library/Preferences/com.apple.desktop.plist
    /Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
    Reboot & test.
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

  • CD looks like it burns but doesn't work

    I'm just upgraded to Itunes 11.4.0.18.  I put a free podcast in a playlist, used blank CD-R, did the Burn to Disk, Audio CD.  When I start it, it goes through the whole process, it counts down, the CD drive makes its little noises, and finalizes the disc.  It then goes to the screen with the CD and shows that the podcast is on it under the Devices area.  However, when I try to play it, it freezes up, and when I eject the CD from my laptop and try to play it in my car, it errors out.  I've tried it a bunch of times with different podcasts.  I never get an error message or anything.  The weird thing is, if I take the exact same CD that I just did that process on and put it in Itunes again, it will say it's a blank CD again even though there was something on it.  It will even let me do the process again on the same CD.

    I note from your system details aside User String ending in FBSMTWB that presumably indicates FastBrowser Toolbar software is installed. That must be a prime suspect. Try disabling or uninstalling that software.
    You will probably have to identify the software and remove it using Windows XP control panel. See this answer from ''SafeBrowser'' [/questions/878922#answer-250766] mentioning
    * ''Open the Windows XP Control Panel and remove/uninstall "Fast Browser search protection" and "Fast Browser Search" (MyWebTatoo) ''
    N.B. it is conceivable that names of such software change slightly, depending on when and how it was installed.

  • My cd burning doesn´t work

    Suddenly my burning device doesn´t work, it appears some errors but I can read music cds..What can I do?

    If Allan Eckert's suggestion doesn't work, try
    Intel-based Macs: Resetting the System Management Controller (SMC)
    <http://support.apple.com/kb/HT3964>

  • I can no longer burn CDs  - "may be incompatible with this disc burner, try slower speed, try another make of disc"  Still doesn't work

    I can no longer burn CDs  - "may be incompatible with this disc burner, try a slower speed, try another make of disc"  Tried that, still doesn't work.

    Try a free burning utility which allows you to turn off the laser for test burning (so you don't waste media).  Try burning a test CD outside of iTunes.  If it works it's iTunes. If it doesn't work it could be computer software or hardware but then we know how to proceed.
    List of burning software on pure-mac.com - http://www.pure-mac.com/diskfile.html
    Burn - http://burn-osx.sourceforge.net/Pages/English/home.html - includes basic DVD authoring

  • Burned in Nero Express through Windows, doesn't work on Mac

    So I just burned a Data DVD (files like music and mac applications) on Windows, using Nero Express, but then I mount it on my Powermac G5 PPC and it doesn't work, my mac doesn't recognize it, what's the problem ?
    Thanks.

    Did you close the disc, or leave it open for further burning sessions?

  • Can anyone help me display the calendar list using an iphone4 wit iso 7.1.1?  I have already tried tapping the magnifying glass and that doesn't work.

    Can anyone help me display the calendar list using an iphone4 with iso 7.1.1?  I have already tried tapping the magnifying glass and that doesn't work.

    That icon allows for the calendar month to display with the appts for that month below.  I want to see only the list of appointments without the month displaying.  I use to be able to get that display but since the last update tapping the magnifiying glass doesn't work.

  • Keyboard doesn't work in vmguest.iso created by Deployment Workbench program

    Hello,
    I created the boot image for reference computer using MDT Deployment Workbench and wanted to run it on a virtual machine using HyperV for testing.
    The vmguest.iso image boots succesfully but the keyboard input in windowsPE doesn't work, neither the hyper-v "Paste from clipboard" option.
    Any ideas how to solve it?
    Regards
    Mario

    You really should keep all correspondence on the same issue on the same thread.  That is good forum ettiquette.  Please continue in this thread.
    I am sorry but I don't have any more information that could help you.

  • TA44597 I'm trying to put playlist onto cd.  My computer has built in cd rom/dvd player that doesn't work, I purchased an external dvd rom which plugs into my computer via usb.  iTunes recognises when I have inserted a cd to play but will not burn to it.

    I'm trying to put playlist onto cd.  My computer has built in cd rom/dvd player that doesn't work, I purchased an external dvd rom which plugs into my computer via usb.  iTunes recognises when I have inserted a cd to play but will not burn to it. help!

    Portsian wrote:
    I'm trying to put playlist onto cd.  My computer has built in cd rom/dvd player that doesn't work, I purchased an external dvd rom which plugs into my computer via usb.
    Is it also a CD/DVD burner? Or is it kjust a CD/DVD player?

  • Burned DVD - menu doesn't work

    I'm fairly new to all this and have created a slideshow in iMovie and then created a DVD in iDVD. In iDVD it all works (there is just one menu item). But when I burn to disc image (or even burn a dvd) the menu link doesn't work - it just starts over the main screen. However, with the mac dvd player if I go to the menu, I can access it through "title".
    HELP!
    Many thanks!
    bchina

    Try closing iDVD and trashing the file called com.Apple.iDVD.plist located in User/Library/Preferences. iDVD will create a new file upon relaunch. Then repair permissions using the Utilities/Disk Utility app on your Mac. After deleting coded assets, try burning again.
    When you burn again, I would burn from a disk image rather then directly from your iDVD project. Open your iDVD project, Delete Coded Assets from the Advanced menu, and save your project as a Disk Image on your hard drive. The assets will re-encode, taking a little time. Play the disk image with your computer's DVD Player application and see if the menu button works on the disk image. If it does, your initial problem might be caused by bad media. Burn a new DVD disk from the disk image at 4x speed, using Verbatim or Maxell DVD-R disks. See if that works.
    Hope this helps.

  • My Ipod touch 2nd gen. was working fine but when I tried to charge from my PC the Ipod start getting too hot and the screen turn black and doesn't  work anymore.Maybe is burn?

    My Ipod touch 2nd generation was working fine until I tried to charge again from my PC,when I connected the Ipod was getting too hot and smelling like burn cable,the screen turn black and doesn't work anymore. any ideas about what happen?

    You can try here:
    iPod touch: Hardware troubleshooting
    However, from your discription, I suspect that something is broken.  Maybe a dead battery.  In that case. I would make an appointment at the Genius Bar of an Apple store and see what they say.

  • CD burner doesn't work

    I've just tried to burn two CDs, in the way I have always done; buy opening 2 Finder windows, & copying the album across to the window with the CD in it, & clicking 'Burn', Suddenly this doesn't work; I get a CD which shows wierd letters in the window of my CD player - like 'AO 1' - & nothing plays. Does anyone have any ideas? I absolutely hate burning Cds via iTunes, as it is completely stupid - you cannot burn directly from albums; you have to move the album to a pointless 'playlist' first (which I will never play as I will always play the original album - doh). 

    hi there-
    the first thing i would do is go to utilities > disk utility and repair permissions. then boot to the install disk and repair the disk. http://docs.info.apple.com/article.html?artnum=106214 if it still isn't working, then try doing the combo update for 10.4.8 available here. http://www.apple.com/support/downloads/ good luck. [ 8 ) ]

  • TS4268 FaceTime doesn't work after upgrade to ISO 6.0.1, apple support team has sent an auto reply that doesn't help .... Any suggestion will be appreciated

    FaceTime doesn't work after upgrade to ISO 6.0.1, apple support team has sent an auto reply that doesn't help .... Any suggestion will be appreciated

    Hi AnaMusic,
    It was working perfectly before the upgrade to ISO 6.0.1, but now I can't log in using my apple ID ... I have tried all suggestion from Tom but nothing does work. I keep getting the message "FaceTime can't log in, check your network" is nothing wrong with my network everything else works fine, I can log in into FaceTime using my IPad 2 and my apple ID.
    I'm currently working in Korea, but I bought the IPad in Australia,
    Regards,
    Namur

Maybe you are looking for