Burn Photos to IDVD
I would like to burn my photos on IPhoto to a DVD. I have 293 pics, 8 small movies totaling 2.8GB. It's not alot, but i don't know how to do it. I dont even know where to start. I just want to use the DVD as a archive, just as i would if i was burning a few pics to a CD so i could use it later if accidently delete the pics. Can this be done in IDVD? Or do I need to burn the CD's? Thanks, dan
Because you are not looking to view the photos and movies on a DVD player, I don't think that this is an iDVD question. You can accomplish your goal by burning your files to a DVD. (If you were dealing with photos alone, a CD would work.)
This is from Mac Help: _Burning a CD or DVD_. These are the basic instructions. Refer to the entire section in Help for further details.
Insert a blank disc into the optical drive of your computer.
If you see a dialog, you can choose an action from the pop-up menu and select "Make this action the default" if you want the same thing to happen every time you insert a blank disc.
The disc appears on your desktop.
Double-click the disc to open it, and drag the files and folders you want on it to its window.
The Finder places aliases to the files in the disc's window. The original files are not moved or deleted.
Arrange and rename the files exactly as you want them.
When burning the disc, the Finder gives the items on the disc the same names and locations as the aliases in the disc window. After the disc is burned, you cannot change them.
Choose File > Burn Disc, and follow the instructions.
The files that the aliases point to are burned to the disc. In addition, if any folder you copied contains aliases, the original files for those aliases are burned to the disc as well.
I hope this helps.
Similar Messages
-
I burned my first iDVD andpicture quality is not good. Originals are excellent. My photos are shot in raw or jpeg, both are not sharp when I view my DVD. I viewed it on my 1080 dpi tv and my new apple computer.
There are many ways to produce slide shows using iPhoto, iMovie or iDVD and some limit the number of photos you can use (iDVD has a 99 chapter (slide) limitation).
If what you want is what I want, namely to be able to use high resolution photos (even 300 dpi tiff files), to pan and zoom individual photos, use a variety of transitions, to add and edit music or commentary, place text exactly where you want it, and to end up with a DVD that looks good on both your Mac and a TV - in other words end up with and end result that does not look like an old fashioned slide show from a projector - you may be interested in how I do it. You don't have to do it my way, but the following may be food for thought!
Firstly you need proper software to assemble the photos, decide on the duration of each, the transitions you want to use, and how to pan and zoom individual photos where required, and add proper titles. For this I use Photo to Movie. You can read about what it can do on their website:
http://www.lqgraphics.com/software/phototomovie.php
(Other users here use the alternative FotoMagico: http://www.boinx.com/fotomagico/homevspro/ which you may prefer - I have no experience with it.)
Neither of these are freeware, but are worth the investment if you are going to do a lot of slide shows. Read about them in detail, then decide which one you feel is best suited to your needs.
Once you have timed and arranged and manipulated the photos to your liking in Photo to Movie, it exports the file to iMovie as a DV stream. You can add music in Photo to Movie, but I prefer doing this in iMovie where it is easier to edit. You can now further edit the slide show in iMovie just as you would a movie, including adding other video clips, then send it to iDVD 7, or Toast, for burning.
You will be pleasantly surprised at how professional the results can be!
To simply create a slide show in iDVD 7 onwards from images in iPhoto or stored in other places on your hard disk or a connected server, look here:
http://support.apple.com/kb/HT1089 -
HT201788 How do I burn photos onto a DVD from iPhoto?
I am trying to burn photos/folders from iPhoto onto a DVD/CD but when disc utility opens I am unable to burn any of the items or folders onto the disc. I thought that my optical drive was perhaps malfunctioning so I purchased a SuperDrive. However, I am running into the same problem. The folders or pictures within, that I want to burn remain inactive. How can I burn these pictures onto DVD/CD?
What kind of DVD disk do you want to create? A data disk that just contains the image files or a video DVD disc that can be played on a DVD player on a TV set. They are two entirely different types of disks and require different workflows.
If you're running Yosemite then you have iPhoto 9.6 or 9.6.1.
For a data disk:
1 - select the photos to be burned to disk and export to a folder on the Desktop File ➙ Export ➙ File Export menu. Set the Kind = what you want, the original file or the current, edited version.
2 - insert a blank DVD in the optical drive.
3 - drag the folder of photos onto the DVD disk's icon.
3 - drag the DVD disk icon to the Trash Bin in the Dock which turns into the Burn function:
For a video DVD disk:
Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. For iPhoto 9.5 and later selct 480p.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailer like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage. -
I'd like to know how to put photos on iDVD so I can play them on regular DVD players and view on TV. I've never done this, and am confused by all the options and variables I've been told. I'd just like the simplest of instructions for the first time, learn that and then go on to sub-catorgorizing and attaching sound bites and notarizing and all that stuff.
I'd appreciate any help/advice. I'm not a computer whiz, but I'm not stupid - just want to start out simple. Thanks - MikeThe most straight forward way is to use the Slideshow feature of iDVD.
Open iDVD, start a new project, select the theme you like.
Click the slideshow button along the bottom of the iDVD screen. You get an icon/folder called "My Slideshow". You can change the name simply be clicking the name, then click again to highlight it for editing.
Double click the icon/folder to open the slide show. You can now add your photos at this point. You are limited to 99 photos per slideshow. With the customize tray open (bottom left button) select the media tab to see what you have in iPhoto and can pick from there.
Alternatively, you can drag and drop photos or folders of photos into the drop zone of iDVD (your photos do not have to come out of iPhoto).
Your photos appear in the window. You can rearrange them if needed simply by grabbing any and sliding them into the position you want.
Now pick the options at the bottom like if you want the slide show to loop, if you want to add music, if you want transistions between photos, and how long you want each photo to be on the screen.
That't it. Burn the DVD and throw it into a player and see how it looks. You can also add multiple slideshows to a DVD so you can have a bunch slide shows of 99 photos each if you want.
One final thing, in the iDVD preferences, if you look under the slideshow tap, you will see that it probably already has the scale photos to TV safe area. This means photos are shown smaller with a border around them to make sure none of your photos get cut off on any TV. But this is a fairly conservative resizing, so many TVs may show the whole photos without cutting much off if you don't use this option. So if you find the photos are too small, turn this off and see if they show up ok on your TV at full screen.
Best of luck,
Patrick
p.s. I wrote the above while stepping through iDVD version 4. Earlier versions may work differently. -
If I make Diashow of my photos with iDVD, i cannot see them on the whole screen as in iPhoto and there is no possibility for the Ken Burns Effekt. If i send the pictures directly from my canon camera, I have Full HD Quality. If I make this with iDVD the quality is less. Is there any solution?
if you want KB effect you must do that within iphoto slideshow before exporting to either desktop for import into idvd, or sharing direct to idvd from iphoto.
idvd does not burn HD. It's SD --standard definition 720x480, so yes quality will not be the same. -
Can I burn photos onto a DVD/CD for non-Mac users?
Can I burn photos onto a DVD/CD for non-Mac users?
You can burn a plain CD/DVD by just dragging the photos there; but, that may or may not be playable by everyone. To be sure that the result would be playable in any computer or CD/DVD player, it would be better to use either one of the apps already on your system - such as iPhoto. I don't use that myself - I use other third party software - but take a look at iPhoto help. And, you could make it more interesting by creating a slideshow - also in iPhoto, or iMovie. To give it the final cool touch, bring it into iDVD to give it a polished look if you'd like. You can burn it then from any of the above.
If you happen to have Toast (an excellent burning app), you could use that as well (that is my preferred way to work). In Toast, you have multiple choices: burn a data CD/DVD for Mac only, for Mac & PC, etc, burn a picture CD, video DVD, etc, etc. -
I am trying to burn an imovie to a DVD. I keep getting the message multiplex error. I do not know what to do. Please, can anyone help me.
Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev. (Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W -
Since loading Lion I can no longer burn photos form iPhoto on a dvd for archive purposes
Since loading Lion on my MacBook Pro, I can no longer burn photos form iphoto for archarving purposes. I used to load the dvd and it would showup on the screen then drag highlighted photos onto the dvd. Now, dvd only shows up sometimes and when it does, it tells me the new disk is full. How can such an easy task become obsolete with this update. I have also tried using idvd for archiving purposes but this process will only allow viewing. I want to be able to reload photos back onto the computer at a later date.
I habe the same problem and cant find a helpful post on the web!
How can i get it back to work??? -
I am trying to burn photos from my library to free up space on my mac. I am down to 13 gb. Every time I burn a dvd with a couple of hundred pics it comes up "burn failed" optic drive. I have burned in the past. What is the problem?
Try freeing up space BEFORE you trying burning a DVD.
Freeing Up Hard Disk Space - Mac Guides -
How do you burn photos to CDR from Iphoto. 9.5.1
How do you burn photos in Iphoto 9.
You used to do it from Share and now I can't find the instruction.That feature has been discontinued. One can no longer burn a "mini" library from iPhoto to disk.
To burn photos to disk with iPhoto 9 and later the photos must be exported to a folder on the Desktop and that folder burned to disk via the Finder.
OT -
when I try to burn my slideshow.mov to a dvd disc, it will burn but when i put it in the dvd player it says 'disc error'. I have burned it thru iDVD before but forgot how to do it and it won't do it now. The slide show is on my desktop
Rather than burn directly to disk follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums. -
I was having problems burning DVDs' from iDVD and it turned out my burner is at fault.
I have a 27 inch iMac using a OPTIARC DVD RW AD-5680H. Where can I buy a replacement in UK? I have seen these with SATA is this the correct cable for my mac?
I have also tried the Mac superdrive but my imac wont recognise it as it's been configured for macbook air and mini mac. I know I can "make" it work by doing something or other in com.apple/plist, but dont want to mess about in there.
I'm also told an external drive would work but does "mac compatible" mean only for air and mini as their own superdrive is or all macs?
Any help appreciated before I convince myself mac is no better than windows pc!Thanks but this didn't really help.
I can buy the drives at a dozen places but none of them seem to know what connection is correct (SATA etc) and that includes the apple store. It was the store who told me buy the superdrive and all my problems would be over. Wrong! It isn't recognised by imac as it's confifured for air and mini mac. Only way to make it work is as i said in earlier post. (Would you be happy buying a car you were told would start and then discover you have to open the bottome and fiddle to make it go?)
The apple store I would not even consider taking it to. Days without the pc, over priced and don't have a good reputation for actually fixing things!
But thanks -
I just burned photos from different albums to CD-R. When I checked on the photos I burned on the CD-R afterwards, I noticed that the titles of each folder that these photos are extracted from appear. How can I get rid of these titles???
iPhoto 9.6 cannot open iPhoto Libraries on CD/DVD. The iPhoto Library needs to be on a writable storage. Copy the iPhoto library from the disk to a folder in your Pictures folder. And then run the iPhoto Library Upgrader on that copy, see this link: iPhoto '11: About the Library Upgrader
-
Ken Burns Effect in iDVD without iPhoto?
I was wondering if I can add the Ken Burns Effect in iDVD without having to make a slideshow in iPhoto and exporting.
This seems very inefficient to me. So in order to get motion slideshows, you have to export the slideshow from iPhoto as a .mov file (or iMovie which is even less easy), which takes quite a long time (at least 10min or so?) even on my MBP 2ghz and chewed up 500mb for 5 minutes. I have 17 slideshows I'd like to put in one iDVD project - processing them one by one in this way is a real pain in the neck.
Hopefully, one day Apple will either:
- allow you to queue slideshow exporting in iPhoto; or preferably
- accept motion slideshows is a core functionality for iDVD in the same way transitioning slideshows are. iDVD could just call on the iPhoto app behind the scenes to process the motion slideshows, if they really didn't want to move all that code into iDVD. -
iPhoto will not burn photos to a DVD disc(Maxell DVD+R).
iMac response is:
"The burn to the SuperDrive drive failed. The disc drive didn’t respond properly and can’t recover or retry."
These Maxell DVD's are probably 2+ years old. However, I was able to burn 2 disc early this morning. Could it be a heat problem with the SuperDrive?
Your Thoughts?If you have burned 5 or 6 disc in a row then maybe heat could be a concern. I don't think so with just 2. Are you able to burn a disc, CD or DVD, from the Finder or is it just from iPhoto?
Run the Apple Hardware test as described here: OS X Mountain Lion: Use Apple Diagnostics or Apple Hardware Test
OT
Maybe you are looking for
-
How do I transfer iphone 4GS to iphone 5
I bought a new iphone 5, and I would like to transfer the data from my old iphone 4GS to the 5. How do I do it?
-
How can i stop BPC 7.0 MS + Sql version
Hi Guys,i want stop BPC 7.0 MS +SQL version .but It doesn't have a console .so how can i stop it ??
-
Looping over a structure of arrays
Hi Guys, I am trying to loop over a structure of simple arrays. The structure's second column contains a 1 dimentional array. I can't seem to get the proper syntax for my loop.
-
Program uninstall doesn't work, helper.exe doesn't bring up the uninstall wizard. I'm tired of the problems from it even though we don't have it as our default browser. I just want it gone! I've tried the suggestions in the chat forum to no avail.
-
Hi all, In the development server, I developed the web services and generated the urls and it is working fine. After client copy from dev to production, I tried to bind the url in production. After clicking the "open wsdl document for selecte