Burn pictures to dvd

Trying to Burn Pictures to a DVD. Exported selected photos from Aperture to my Desktop. Inserted blank DVD-RW into disk drive which prompted me to open Disk Utility which I did. When asked to select images to burn from disk utility, I selected the correct folder from my desktop, but the images are all gray scaled out so I cannot select them.
Any suggestions

Click on the desktop so Finder is active. Click File in the menu bar and select New Burn Folder from the drop down list. This creates a folder on the desktop. You can change its name if you wish. Drag and drop the photos to the Burn Folder. Go back to the File menu and select Burn (the name you gave it) to Disc...
Follow the directions on the screen.
The photos are not actually moved to the Burn Folder, they are aliases. So at the end of the burn you just trash the Burn Folder.

Similar Messages

Can't burn pictures to dvd

I keep getting error messages when I attempt to burn pictures to a DVD-R. I have seen communications errors and also "laser not aligned"

I would suggest testing with a different brand of DVDs as some of them are not very good.
If that doesn't do it, you are probably looking at hardware service. Contact Apple using www.apple.com/support/contact if you are in a country that supports it or call the appropriate phone number on this page. Alternatively carry the iMac in to an Apple retail store or service provider to ask for an estimate.

I have burned pictures to a dvd off of my iMac. When I try to view them on my macbook I can only look at one picture at a time. Is there anyway to view as a slideshow?

I have burned pictures to a dvd off of my iMac. When I try to view them on my macbook I can only look at one picture at a time. Is there anyway to view as a slideshow? Thanks!

What app do you use to view them?

Pixelated pictures when dvd is played after burning in IDVD

I have created a slideshow in iDVD - all went well. I have burned to a dvd however, when the dvd is played on our dvd player/tv the pictures are terribly pixelated. (they look fine on the preview during the project) - rather frustrating when the thing takes HOURS to burn as there are 1000+ images. Any advice to be offered as to why this is happening and how to prevent it? Many thanks.

Hi Lyn Olds
Welcome to apple discussions. If you haven't already, take a look at apple's tutorial for iDvd. They really do help.
iDVD Tutorial:
http://www.apple.com/ilife/tutorials/#idvd
iDVD 8 Manual, as pdf, so download it. It is very helpful:
http://support.apple.com/manuals/#idvd
Keep in mind the protocol for burning a dvd is rather specific and reduces the resolution of most images to 640 x 480. That's less than a third of a megapixel for still images. Most burned Dvd's are lagging well behind the capabilities of current hi-resolution cameras and camcorders.
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6675.html
You may also want to take a look at these 3 apps that specialize in quality slideshows. They come highly recommended on this forum (especially the first one).
http://www.boinx.com/fotomagico/overview/
http://boinx.com/photopresenter/overview/
http://www.lqgraphics.com/software/phototomovie.php
If the above apps don't meet your needs then search this forum for other solutions like using Ken Burns effect to minimize pixelation via a QT movie.
I believe OT does a great job of explaining this per the following link:
http://discussions.apple.com/thread.jspa?messageID=8164545&#8164545
Btw, the only way I am aware of to burn High Resolution DVD’s is with Roxio’s Toast and a Blue Ray burner.
Another solution is to simply hook your TV to the Mac for playback. That or consider using AppleTV which essentially circumvents the need to burn a dvd altogether.
Message was edited by: SDMacuser

I'm having problems creating a slideshow that I can burn to a DVD. I can see all of the pictures but it goes black at a certain point every time. I'm using iPhoto. I've tried copying it but the same thing happens. Ideas?

I've loaded about 100 photos into a slideshow that I would like to burn into a DVD to share with friends at a 50th birthday celebration. It keeps going black at a certain point but I can see the pictures in the cue. Any ideas on how to correct this and how to burn it to disc easily? Thanks! This is my first time trying to do this.

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
how are you trying to export the slideshow?
Here's how I recommend one get a slideshnow to iDVD: export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

How do you burn pictures onto a dvd?

Hello. I need some help. I been working on trying to burn pictures onto a dvd but still have the pictures in order from at least oldest to newest. I know how to burn pictures I just don't know how to keep them in order still. I have over 7000 pictures on iphoto (i kept dreading saving them lol) and I need to get them to a dvd. I was thinking on making different albums then saving them that way but that's such a hassle. I would rather have just the pictures. Any advice would really much be appreciated!

Lace
Welcome to the Apple user to user discussion forums
Files is Files
THe order they are displayed in is determined by the sort order specified in the file viewer you are using and is totally independent of how they are recorded on the DVD
For example if you are using the finder you can go to the view menu ==> show options and select from a number of sort options (they depend on the view you have) which included date created and date modified -- note that a file viewer is only looking at file dates - it has no knowledge of photo dates which are recorded in the EXIF data within the photo
LN

Subject : Slideshow looks bad Hello guys I have a project in my Final Cut just about done. I want to add my slideshow as part of the project and burn it to DVD. In my slideshow, there are some stills from the movie clips and some downloaded from the i

Subject : Slideshow looks bad
Hello guys
I have a project in my Final Cut just about done. I want to add my slideshow as part ofthe project and burn it to DVD. Inmy slideshow, there are some stills from the movie clips and some downloadedfrom the internet but they all look blur when playback and even worse if Iapply Ken Burn to it. Pleasesome one can tell my how to do it right or it can’t be done because thedownload quality and stills from the clip are not suitable or slideshow. Thank you
PSC

Thank you Ross.
The entire DVD containing Quick Time movies (Final CutExpress project) and slideshow was done in iPhoto. The Final Cut project was rendered prior to export to QT, the slideshow was sent to iDVD withoutrendering. The slideshow with most of the pictures from my still camera incombination with stills from movie clips and some downloaded from the Internet.After burning, the movie playback is perfect but the slideshow is not. The slideshow containing 3 differentkinds of pictures; those from my still camera looks OK; the stills from themovie clips and from the Internet are not. I don’t have much knowledge in this game, but I think NTSCwith frame size 720x480, and the downloaded picture Item Property shows most ofthem are between 400 to 500 x 300 to 600, may be both of them are not suitablefor TV screen while the stills from my still camera looks OK because they are2048x1536. Please enlightenme. Once again, thank you so much,I really appreciate the time you offered.
psc

I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.

I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.
I am running Mac OSX 10.4.11. According to the System profiler the CD/DVD drive is a "PioneerDVD-RWDVR-112D." When I compare the information under this heading, the only unusual difference from my iMac is that the G5 reads "Burn Support: Yes (Unsupported)." My iMac reads "Burn Support: Yes (Apple Shipping Drive)."
Under the System Preferences the options are set to "Ask what to do" when a blank CD or DVD is inserted. Music CD set to open iTunes, Picture CD set to open iPhoto, Video DVD set to open DVD player.
Do you have any suggestions?
Thanks, Jack

Hi Jack, great help so far!
Internal...
http://eshop.macsales.com/static_pages/Framework.cfm?page=superdrive/sdl_powerma c_g5.html
External be sure it's Firewire & not Bus powered...
http://eshop.macsales.com/shop/firewire/optical-drives/

HT5287 If DVD Movies, Audio CD's and even burning CD and DVD's are not supported, what is the point of DVD & CD Sharing then? Wouldn't it just be better to remote in or use a thumb drive if it's only able to be used for data transfer?

If DVD Movies, Audio CD's and even burning CD and DVD's are not supported, what is the point of DVD & CD Sharing then? Wouldn't it just be better to remote in or use a thumb drive if it's only able to be used for data transfer?
Or am I missing the bigger picture?

As long as you have a Superdrive or an external burner/drive, burning, watching, installing, etc. from CD or DVD will work just fine. And so will sharing.

Burning both a DVD and Blu-Ray

So I have a project going in Premiere that I've sent to Encore. I picked new DVD project and it transcoded it correctly. I then set up multiple menus and burned it to DVD. Now I want to make a high-def version for Blu-Ray. Is there a way to do that by just re-encoding the video from Premiere so I don't have to recreate all of my menus, timeline markers, etc. in Encore? I just need to swap out the HD video for the SD video in Encore.

Stan Jones wrote:
Thnks for that feedback Alan. I wonder if, doing the resizing in photoshop using "edit in photoshop," there would be a way to keep the navigation in place? I assume by new project you are resizing in photoshop, but bringing this into a brand new project?
I tend to play safe by saving the BR menu as a file, then opening that in Photoshop and scaling. If I use a still as background I usually scale that separately. The navigation survives, but due to the Encore's default automatic routing of buttons (unless you know a way to turn that off) I still have to reset it to my personal preference.
Obviously, I always work BR to DVD, as there can be difficulties with button sub-pictures -circular dots can turn out with a chord slice missing, etc.
Yes it is a brand new project, which means there can be a lot of work to repeat. Because I use chapter playlists a lot, I have a project saved to use as a template, with a couple of timelines and a dozen playlists each. That cuts out some of the tedium.

How can i improve burning quality of dvd.looks fine in preview on idvd,but final burn quality is poor/

how can i improve burning quality of dvd.looks fine in preview on idvd,but final burn quality is poor.

Had same problem with iPhoto pictures and poor burn quality. Went back to original picture file and dragged images into idvd project from there. Set encoding at professional quality and burned at slowest speed. Got very good result with high quality slideshow when played on TV.
Also tried Old Toad's Aug 30, 2011 advice to get a slideshow into iDVD with transitions, music, etc. from iPhoto.
Again the quaility of the burned CD was very good.

Making A Slide Show To Burn To A DVD

His I just started using photshop elemnents 13 from a previous 11 version.
In the past I picked some 300 slides to make a slide show with music and then exported it to a WMV and then imported the WMV into premiere elements and burned a DVD. In phtoshop elements when I selected my slide and created a slide show I could choose how many seconds each slide, the color of the borders, the manner in which slide changed and I used random.
You could then do zoom in or out, make extra slide with information, add music and then save and export to a WMV and then import that into premiere elements and then burn a DVD.
Help
Tom Fitch

Reason I thought PSE4 would burn to a DVD is, there is a button in the slide show screen that says "burn to DVD" in the PSE4 book we were reading.
If Premiere Elements 2 were also installed with Photoshop Elements 4, then it was possible to burn to DVD from the PSE 4 slide show editor by using Premiere Elements 2. Not all writing on that workflow made it obvious that the Premiere Elements software was required.
Would I be better off getting a different program for making slide shows? The pictures I'm trying to make into a slide show are from a 90th birthday party I shoot over the weekend and want to give out copies of a DVD to the guest.
Option 1
If you have already made a slide show in the Photoshop Elements slide show editor, then you might as well do some investigation of the alternatives.
-- What Windows operating system are you running ? If it includes Windows DVD Maker, then I would give that a try. Write your output of the slide show from PSE to a File - WMV - with Size of DVD,NTSC (or DVD,PAL if your TV is PAL format). Then use that WMV file as input to Windows DVD Maker.
-- If you don't have Windows DVD Maker then you could investigate whatever DVD software came with your PC.
FYI - One warning about the photo files that you use in that PSE slide show. If you use hundreds of high resolution photo files, then PSE can have problems. If your output will NOT be High Def (and yours probably will not be since you mentioned a DVD) then "downsizing" the photo files to approx 1000x 750 pixels will decrease the probablility of your having problems with the slide show.
Option 2
If you have not yet started the PSE slide show, then you might consider a program that many people like for slide shows ----- ProShow Gold from Photodex. It does have a trial.

I would like to burn pictures to a disk in a certain order, not according to file numbers -is this possible?

Im using IPhoto and would like to burn an album to a DVD. In the album, I have put the pictures in the order I want them. But it appears when I export them to burn on a DVD, they go in numerical order. Is there a way to burn the album with the pictures in the order I want them to be in?

No.
Files don't have an order. They're just on the disk. The FInder can view them in a number of ways: sorted by name, date, size etc, but that's all. The only way to reliably get them to show in a preferred order is to name them... Pic_01.jpg, Pic_02.jpeg etc.
Fast way to do this:
Create an Album in iPhoto, drag the images you want to the album and arrange them as you prefer.
Then select all and go Photos -> Batch Change
Set the Title to... Text, and add, well whatever is appropriate.
Check the box to append a number to each photo.
So now they are all there in order as Text 01, Text 02 etc.
Now Export them. File -> Export
In the export dialogue there are a number of options that you can read about here:
https://discussions.apple.com/docs/DOC-4921
But from the point fo view of naming, in the export dialogue choose to use the Title.
Complete the export to a folder on the desktop.
Now you have a folder of files called Text01, Text 02 and so on.
Burn that to disk.

How to burn project to DVD so it can be viewed on any DVD player?

Hello,
I am new to iMovie and currently using it to make a movie that I want to give as a Christmas present, therefore I want to burn the movie to DVD so it can be watched on DVD players as well as computers.
I have done research and found that iMovie no longer allows you to burn DVDs via iDVD...
So my questions are:
1) When exporting my iMovie, what file format should I use for best compatibility (can be view on PC, MAC or DVD players)?
2) What is the best free DVD burning software to use to get the movie onto DVD?
Thanks for the help!

1) So a .MOV file is the best way to export the video from iMovie?
Don't know - but should work OK. alt. .mpeg4 / H.264 - but might be more of a problem
2) A .MOV file burned onto a DVD will be playable on DVD players?
NO - a Video-DVD (that can be played on any standard DVD-player) must be created using a DVD authoring program as iDVD etc. AND use Verbatim DVD-R disks to be on the safe side. Memorex is known to be problematic and so is +/-RW and DVD+R only plays on newer DVD-players.
3) What quality should I export from iMovie in? My vidoes are in 1080P I think.
DVD - is as Standard (Whatever program used) only interlaced SD-Video and most programs are bad on Downscaling = Share to MediaBrowser and as Medium use to give best possibly result (if You do not use iMovie HD6 or FinalCut as they can deliver even better result)
else I do not know
on DVD Quality I've collected this.
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
Try to break the process up into two stages
• Save as a DiskImage (calculating part)
• Burn from this .img file (burning stage)
To isolate where the problem starts.
Another thing is - Playing it onto a Blu-Ray Player. My PlayStation3 can play BD-disks but not all of my home made DVDs so to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
• No File Vault on - Important
• NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
• Lot's of icons on DeskTop/Finder also slows down the Mac noticeably
• Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
• And let Mac run on Mains - not just on battery
Yours Bengt W

Firmware upgrade for Matshita DVD-R UJ-845E to burn dual layer DVD?

Dear All
I have a PowerBookG4 with a Matshita DVD-R UJ-845E which it seems apple has disabled from burning dual layer DVD. I've read around that there are firware upgrades that can enable actions again. I can't find any for Matshita DVD-R UJ-845E, though. Any ideas?
Thank you!
Angie
PowerBookG4 Mac OS X (10.4.8)

angie1976 you have me directly.
As stated in previous posts there have been several issues with the Matshita Optical drives that Apple has installed in there computers. Over time the problem has been discussed and it would appear that there are several things that come into play here.
Apple has made it so that many of the drives they intall are in fact not capable of there full potential.
It in fact boils down to an issue of Copywrite Infringment. Apple doesn't want to put itself in a position to be open to Lawsuits from the Motion Picture Industry.
Many of the drives that do not work up to there full potential have FIRMWARE updates that are offered by the manufacture to remedy this problem and some do not.
It has also been found that the casual user that burns DVD's isn't aware of the huige difference in the Format's available for DVD Burning. and the many limitations of these different drives as far as Media and Speed of Media is concerned. Many of the DL burners that were installed will not burn DL. Apple has had such a huge amount of dissatisfied customers that many that will take the time and if they still have AppleCare these drives will be replaced free of charge.
Here are a collection of links that will help you to understand the problem as it exists.
I will also say that upwards of 85% of the problems user expieriance is with POOR QUALITY MEDIA.
http://www.digitalfaq.com/media/dvdmedia.htm
http://www.videohelp.com/dvd
I also noticed that some others have chimed in as to the fact that Media was not the issue. This is not entirely true.
Here is another post that I answered that will also cover this subject that may help you understand the problem a little better.
Let me see if I can shed some light on this issue, for you.
Maybe some others as well can.
There are several Applications that are standard programs that come with OSX.
Of these, several have the ability to burn a project.
iTunes....iMovie.....Disk Utility.
Each of the above mentioned applications were developed for a specific purpose. However, they are capable of doing more than the original developers intended.
The problem in my eyes is the lack of information for a new user to Mac.
In what one would consider the perfect world, you simply choose a project, drag it in to one or more of the applications mentioned above and simply click burn and you are finished.
This is not always the case.
Often users are left with the issue of no clear cut direction on how to use these different burning softwares, and the ability to have a clear cut step by step user interface.
All of the furnished OSX burning software is in fact usable and works well.
The problem is HOW TO USE THEM.
The more experienced users find this either to be a non issue or will take the time to work with these different applications until they figure out how to use them.
There are of course different Advertisements and FAQ's that cover these to some degree that leave users more confused than when they started.
One of the major issues that accompany this problem is this.
Not all Burners that Apple uses in there machines are the same.
Not all Burners will accept all the different Media's that are available on the market.
Thus leaving many users confused. Not having a clear cut understanding of what the difference is between these different Media's and there use.
http://www.videohelp.com/dvd.htm
The above link offers an overview of this subject.
Apple has found itself in a delima with the Motion Picture Industry, as well as The Music Industry over the issue of offering there users with the capability of copying Copyrighted material. Thus leaving them open for Law Suits.
There was an in-depth article in one of the recent issues of Macworld Magazine, that went in-depth covering this issue.
It is almost impossible to cover all aspects of this issue on these forums.
There are of course different softwares available that make the burning experience much easier and user friendly.
Roxio is one of the industry leaders in the development of Mac compatible Burning Software. They offer 2 of the industry leaders in this area.
Toast-7 and Popcorn.
This solves only one portion of the problem. Both of these software offering give the user the ability to copy about anything.
However, there is so much controversy over the issue of Movie and Music copying, the manufactures of the Computers, and the Burners try to limit the users ability to copy these, and thus be clear of any Legal Issue.
Here again rises the problem of computer users being mad because the industry has placed limitations on there ability to use there product in a fast easy to use method.
Again there are work around to all of these issues.
The problem then becomes who out there is willing to tell us what is the easiest most trouble free method of using these computers, burners, software,and media.
The burner manufactures offer there burners.
To get them to work to there full potential the users then must search out the 3rd party Firmware updates that will enable them to work properly. This is not an issue with all burners but quite a few.
Most readers on these forums have read about the MEDIA compatibility and poor quality issues these are covered in a prior link.
To sum this up, the resources are available to do just about anything one wants to do in the copy area.
Not every copy problem is the same because of all the different elements that come into the equation, Burner, Media, Software, Firmware.
So if a user has a problem and needs the information and the resources to copy there projects whatever they may be.
Be through, give as much information as you can.
Keep it simple, No need for the use of exotic terms that most people don't understand anyway.
In-depth. Tell all aspects of the issue and what you have what you are using and what you want to accomplish.
If there is an answer out there.
Someone will Chime in.
The users on these forums for the most part are more than willing to share in there knowledge, free of charge.
One last thing,
When a user gives you an answer for you problem, for the most part they believe it to be a fact. Sometimes this isn't the case, we have all been guilty of, this is not done with malicious intent. It is done trying to help.
I personally have been misinformed, or tried a fix, that will work in one instance but not another. So tell all you can about your problem.
Cheers Don

Burn pictures to dvd

Similar Messages

Maybe you are looking for