Burn Stops In iDVD After Edit In FCP Burn Stops In iDVD After Edit In FCP

Hi: I'm using FCP Pro5 and idvd4 OSX 10.3.9.
I have a quicktime movie file (movie is 8 minutes of video/audio and QT file is 10.4GB in size) from a previous edit that imports and burns fine in iDVD.
I imported the file into FCP -, made a quick edit with 2 dissolves, rendered, saved, exported to Quicktime using the File/Export/Export to Quicktime routine (file icon looks different and does not have a .mov after it, 1.87GB size), imported into iDVD and tried to burn to again using both the Hutz/Purz (spelling) method of saving to a disk image and burning to a disk - goes through to Step 3: Encoding Assets, works for a while, and unexpectedly quits.
Any suggestions welcome as the project is due today. Thank you.

Sorry for the confusion, but I'm confused (obviously). I'm not sure what you mean what format am I exporting - my understanding is that FCP has the option to export the sequence I produced to a Quicktime movie that can be used with iDvd or DVSP. Our Media 100 show was exported to a quicktime file, which I put into FCP and am now trying to export as a Quicktime movie. Again - sorry for the lack of knowledge but I'll try to supply you with specifics if you can let me know what and where to find the specifics you need to help. TIA

Similar Messages

After burning to dvd, using idvd, movie stops on frame but audio continues

After creating imovie which works perfectly, and also after trasferring to idvd works perfectly, i have problems when playing back dvd after burning to disc. The movie stops but the audio continues. I altered the clip but same thing happened in next clip after next burn. I don't think its a corrupt clip, but maybe something to do with WHEN it occurs in the movie. Any suggestions? After 4 goes and many hours burning I am stumped!

Hi Tomma1
And welcome to apple discussions. It's good you chose to use 16 bit audio for all of your source material. And assuming this is accurate info .... From what I can tell, you are doing nearly everything correctly. However let me ask you a few questions.
1. Are you using the boot volume (the hard drive where iDvd and Leopard are actually located) to encode your dvd (yes/no)?
2. More importantly, does the disc image also go out of sync when played thru apple's dvd player app? or does it only happen on the burned dvd-r?
3. Are you using Verbatim Dvd-R or an alternate brand? if it's the latter, then for troubleshooting purposes while on this forum; please use Verbatim Dvd-R. (it helps us eliminate additional / possible variables). Thereafter feel free to use the media that works best for you and your mac.
4. Have you tried an alternate encoding setting other than pro quality setting? and do you get the same results?

I have problems with my films that become slightly jerky after I have imported and edited them in iMovie and then burned them onto a DVD using iDVD. I can see the weak jerkiness when panning in both laterally and vertically. I shoot with a camcorder Canon

I have problems with my films that become slightly jerky after I have imported
and edited them in iMovie and then burned them onto a DVD using iDVD.
I can see the weak jerkiness when panning in both laterally
and vertically.
I shoot with a camcorder Canon Vixia HF10. The camera has been set to deliver HD quality (1920x1080). But I have accidentally filmed with a frame rate of 60 (?).
When I import the films in iMovie I have been asked if I want to change to frame rate 30 (instead of 25). I have chosen 30.
Could it be the setting of a frame rate 60 in my camcorder that causes jerkiness when panning or what else?

I have problems with my films that become slightly jerky after I have imported
and edited them in iMovie and then burned them onto a DVD using iDVD.
I can see the weak jerkiness when panning in both laterally
and vertically.
I shoot with a camcorder Canon Vixia HF10. The camera has been set to deliver HD quality (1920x1080). But I have accidentally filmed with a frame rate of 60 (?).
When I import the films in iMovie I have been asked if I want to change to frame rate 30 (instead of 25). I have chosen 30.
Could it be the setting of a frame rate 60 in my camcorder that causes jerkiness when panning or what else?

HT1583 sound stops part way through on burned idvd, but ok on computer edit.

Can anyone help, for the first time having a problem with a burned idvd which the sound stops part way through. If sound turned right up on TV muffled sound
is there. Edited on computer and all works fine with full sound right the way through, only trouble is on the disc. Have tried many discs, so does not appear to
be disc failure.
Appreciate any comments please

Hi
FIRST OF ALL - THE MAJOR ADVICE in this forum EVER !
In iDVD - Before Burning the DVD DO !
Save as a DiskImage
Double click on this .img icon
test the new Pseudo DVD (looks like a white hard disk) with DVD-tool
THEN
• DVD Brand - matters
• DVD type used - matters
• BURN SPEED - matters
• Audio file format - matters
WHAT did You use
I only use
- Verbatim
- DVD-R SL
- x2 max x4 - Best / High - IS NOT BEST
- .aiff - NO .mp3, .wma etc alient formats - from iTune EXPORTED OUT as .aiff ONLY
Yours Bengt W

How do I export a 98 min video edited in FCP 7 to IDVD for single disc DVD burning?

How do I export a 98 min video edited in FCP 7 to IDVD for single disc DVD burning?

Your current settings should match the source material in your timeline. Though, it probably doens't matter what it is as long as your settings are not for a highly compressed format like h.264 or mpeg2.
iDVD should take any all "I" frame format and encode it. (All I frame formats include DV, DVCProHD, ProRes).
x

When I'm previewing my iDVD, the pictures are all of the edited ones - which is what I want - but after I burn the DVD, all the pictures are in the unedited form!! What the heck?!! How do I fix this problem? I've never experienced this before!!

When I'm previewing my iDVD, the pictures are all of the edited ones - which is what I want - but after I burn the DVD, all the pictures are in the unedited form!! What the heck?!! How do I fix this problem? I've never experienced this before!!

Hi
Try in iDVD
• Save as a DiskImage
• Play this by use of DVD-player tool
Still OK or problems ?
If OK - Burn it by use of
• Apple Disk Util tool - or -
• Roxio Toast™ (if You got this - I love it)
Yours Bengt W

DVD authoring after editing project with FCP X

FCP X has extremely limited DVD authoring options within it. Can't put more than one short movie on a disc, only two menu templates to choose from, etc. So my question is what do I use to author a DVD after editing projects with FCP X? I know I need to use Compressor to set chapter points, etc., but what do I use to build the DVD menu and burn the DVD? I certainly hope I am not limited to iDVD only, which is not really a pro application, and I gather that DVD Studio Pro is no longer being sold. Amazingly, I asked this question at a One-to-One session at an Apple Store and the guy there suggested Adobe Encore ... I was totally shocked! Does anyone have an answer to all this?

Encore is very good, but you have to buy PPro to get it, you could look on eBay for a copy of DVDSP. It does look like Apple will not be offering a Pro Level DVD authoring package anymore, it's a shame as DVDSP works very well still and they could have just offered it as a standalone.

Dvd burn stops idvd crashes

Have been having problem when burning dvd, burns so far than quits & notice idvd crash
do not understand what the message means is happening with every dvd burn attempt
Also need to know how to send idvd project to trash / delete when done with it

I had the same problem until I realized I was editing in HD after years of editing Standard DVD video. My hard drive was formated for 32bit and can only record up to 4 GB per file. I had to take one of my hard drives and reformat it to the journal setting so there are no blocks which leaves the entire hard drive of a 2TB unit to record those unbeleavable HD movies. The mov I was trying to take to IDVD was 26GB and it recoreded all the way this time. I DVD will automatically dreduce it to fit on a standard DVD.
Whats rediculous is that every one records in HD now because they can but give little thought as to how its going to be edited. Standard DVD looks great when played on a blue ray and no professionals dont want to pay the extra fee to edit and take it to blue ray as many people dont have Blue ray yet.
Other problems can also stop your recording like a bad still photo file or one that is still in a raw state and not formated.
Hope this helps.

Cannot burn a working disc edited in FCP with DVD Studio Pro

I have made nice DVDs before with DVDSP
I edited a 10 minute video in FCP
Sequence-720 x480 anamorphic DV/DVCPRO –NTSC
Used compressors for encoding
Used compressor’s DVD Best quality settings. Looks fine.
After encoding assets
Put them in DVDSP. The video looks good and functions correctly in preview window.
Somehow when I go to burn it, Im missing something simple - a setting? a preference? New folder?
It will not burn a DVD I can view on PC or standard DVD player. EHHHHHH!!!!
I can get a disc to burn but it will only play my mac. No SD DVD player or computer will recognize it. I must be missing something very simple. HEEELLLLP
Below is DVDSP log results
Note: The file ‘Corona tourney-lip RipperZ fred hall DVD 03/12.ac3’ found in the ‘Lipp ripperZ Fred hall DVD’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Note: The file ‘Corona tourney-lip RipperZ fred hall DVD 03/12.m2v’ found in the ‘Lipp ripperZ Fred hall DVD’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Note: The file ‘lip RipperZ fred hall DVD 03/12.fcp’ found in the ‘Lipp ripperZ Fred hall DVD’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Thanks
Gary

Out of frustration I burned the movie in iDVD. It will work for now. So it's not media DVR-R. DVDSP has a setting or preference wrong or there is some corruption in the software that needs to be adressed.
DVDSP make much better looking and sounding DVDs than iDVD. I stilll need to solve the problem for future DVDs.
As of now DVDSP is set SD 16:9 in the preferences and SD NTSC the disc window.
Thanks
Gary

I have created a movie in 16:9 format. I have created an iDVD pane in 16:9 but when I preview the movie that pane changes to 4:3 and burns the DVD as a 4:3 movie. How can I stop that, please I am in Snow Leopard, using FCE4.0.1?

I am using Snow Leopard and have created a movie in 16:9 format (SD not HDV) I created a movie which stays in the 16:9 format in fcp file, .mov fiule and MP4 file. I created an iDVD pane in 16:9 but when I play the movie in the iDVD preview window the iDVD pane switches to 4:3 and it burns the DVD in 4:3. How can I stop this so I get a16:9 DVD. Thanks for any help offered
James Bowman

Hi
As I see this I see two parts
• Howto go from FinalCut to iDVD
• Howto set iDVD right
In FinalCut Express (to 4) or Pro (to 6 - most probably 7 too)
• One has to set Anamorphic in the Browser window - menu columns
• Export as QuickTime movie .mov - NO QUICKTIME CONVERSION
In iDVD there are TWO places to set - WideScreen
- Start a NEW iDVD project - AND HERE SELECT WideScreen 16:9
- in Project - select Projectinfo
- now set WideScreen 16:9 - Here too
This use to work for me.
FOR FinalCut Pro-X - I have not a Clue - as I don't use it. SORRY
BTW - There is a good practice to before BURNING the DVD do
• Save as a DiskImage
• Test this by using DVD-Player tool
And if it is OK Size and All - then burn it by using
• Disk Util tool
• here set down burn speed to x4 or less (less burn errors = plays on more devices and better)
• Not using Memorex or NoName etc cheap media - as they usually DO NOT WORK as Video-DVDs
• I use Verbatim DVD-R as they play on more and even older DVD-players
Yours Bengt W

Need HELP FAST! Edited in FCP, need to burn a DVD of HD footage to SD PAL

I have tried to read the threads and sort out my problem, but no luck. I really hope someone can help.
Here's the gist....
I show up for a rehearsal for an event I have to shoot tomorrow. They asked me to shoot something today. I shot and edited a 10 minute video in HDV, 1080i, using FCP. I now need a PAL DVD that they can play about 10 hours from now. I exported using Compressor (not sure if I specified any type of audio) using mp2v settings for PAL. I can see it in the simulation, but no audio. it will also not let me burn a DVD to even check if the audio is there, saying it doesn't even FIND the video or audio, even though the file size is almost 400MB.
Any help or feedback would be GREATLY appreciated.
Power Mac G5 using OS 10.4.11
DVD Pro Studio 4
Cheers.... but not here at the moment.

Put your HDV timeline in a DV sequence.
Export as a PAL DV (anamorphic 16:9)
Drop that file in iDVD. The latest version should encode it as 16:9.
Give to client.
In the meantime, do some reading on this forum regarding the HDV to DV translation as well as start at the beginning of the DVD Studio Pro manual. There is a lot of useful information contained here and there that you need to master.
Good luck,
x

My iDVD always says "it was an error during the movie encording" and it suddenly stops burning idk what to do!

Ok so i'm trying to burn a short 10-min-long film to a DVD via iDVD.... i've worked with it before and never had any trouble.
But i havent used it for 3 years now probably, and as i made the DVD menu and sub-menus for this project i worked normally
as i always did, it was easy and everything worked just fine.
The only difference this time is when i click "burn" it starts processing the menus but when it's done, instead of going to the next step which is
processing the slideshows, it automatically stops the burning and it says "there was an error during movie encording" idk why it always comes out,
what i'm doing wrongor if it just doesnt work anymore :S it also opens a new mini window that says "you have insterted a blank DVD.
Choose an action: (open finder) (open iDVD) (open iTunes) etc" so this tells me it's reading it...
i've picked all the options and it still doesnt work with any of those at this same point. I've also tried changing the preferences, the screen mode,
the video quality, EVERYTHING! nothing works! DX
anyone knows how to fix this?
it'd be truely appreciated!!!
Yours Truely, DANIELLA.

So today, I deleted that original file (this gave me the ~18.5 GB free) off my internal HD and tried to burn the project.
So the DV file iMovie is using is on the external again? If so I assume iDVD knows that...
Have you tried making a disk image?
Suggest you create a disc image and then burn the DVD. File/Save As Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006
You could go to the iDVD 5 group and search the group for that error code. There was plenty of those there. Not much here.

IDVD 08 - problem with scene selection tabs not working after "burn"

I have a movie that is about an hour long (made in iMovie08 using mostly still photos). I wanted to have "chapters" -- but with that option gone, I used the Scene Selection option in iDVD08. This created menus with 15 scene selection buttons (I chose every 4 minutes). The menus were automatically created by iDVD and I did nothing to change them, except to type in scene info (two-three words).
The buttons all worked fine on the computer, and I burned a DVD. The DVD worked great in my VCR player. I'd select Play Movie and it would go. I'd select Scene Selection and I'd get the menus for that. But when I'd highlight one of the scene selections and "enter" (select) -- it wouldn't go to that scene. I could go back and forth between menus, and could move around and highlight the scene buttons, but selecting would not start the scene to play. The movie played fine from start to finish, and the other remote features worked (stop, pause, menu, etc.).
I went back to iDVD and chose a different theme (thinking maybe I'd inadvertently done something to mess things up. The only thing I did differently in addition to the new theme, was to add two small movie clips - and I rearranged the buttons on the menu (dragging) to get them positioned where I wanted them. So my first menu says "Play Movie". The second menu has: Play Movie, Scene Selections, Little Movie 1, Little Movie 2. Everything worked greated in iDVD. Then I created a disk image to view using DVD Player (rather than waste another DVD). Same problem -- only worse. This time I couldn't even highlight Scene Selection to get to the scenes' menus.
Any thoughts on why I'm not able to get the "Scene Selection" buttons to work after a burn? Am I missing a step somewhere in iDVD?
Thanks.

I am not sure, but does your post concerning the problem, that all Remote Control function will work properly within iDVD'08 but after burning the DVD absolutely not with the RC of your set top DVD player connected to your TV?
If this is it:
Meanwhile I could figure out - after many nights of not been very productive and only working out on all the iDVD'08 problems - that **ALL** of the *7.0 Themes* have a major problem in generally.
The following points are concerning iDVD'08 using any of the 7.0 Themes:
- Complete deep freeze of your Mac under Leopard when rendering/coding/burning a movie which has chapters and you use movies instead of still images in drop zones. (LeopardiDVD087.0Themes)
- Functions on remote control of your set top DVD player are not working correctly when making a movie with chapters. This is generally on Tiger and Leopard the same problem using iDVD08 with any of the 7.0 Themes.
Quick and dirty workaround:
You may avoid this if you simply use a 6.0 Theme or lower version of the Themes.
But this is of course not the clue...
It is VERY DISAPPOINTING, having software at such a low quality level deliverd by Apple. And somehow it looks like they DO NOTHING against it. No statement, no excuse, they really remain silent.
This may also be a thread you could be interested in:
http://discussions.apple.com/thread.jspa?threadID=1203323
Cheers,
Roland

Won't burn, stops after encoding, then freezes, why?

Hi, I am unable to burn my iMovie project that I "shared" with iDVD. I have tried using a dvd -R and +R, and they both stop right after the "Process Movie" stage, the nothing happens, then it freezes and I have to force quit. So, it never even reaches the "burn" stage.
Can someone help?

Hi jessica:
Please don't let iDVD fool you!
iDVD appears to be unresponsive when encoding Audio
http://docs.info.apple.com/article.html?artnum=302988
Turn off all other applications, set the mac to "never sleep" and
leave it alone overnight to burn.
iDVD takes a great deal of patience.
Sue

I have a few wedding projects(1-2 hours)I am trying to export at full hd quality,than burn in idvd.After rendering for 8hrs I receive error code that states "file is too big". Please help? compressing tips without losing quality?

I have a few wedding projects(1-2 hours)I am trying to export at full hd quality,than burn in idvd. After rendering for 8hrs I receive error code that states "file is too big". Please help? compressing tips without losing quality? or any other exporting alternatives?

Hey Z,
Thank you for the tip on exporting by media browser (large) from imovie. But of course, if it's not one thing it's another. Now that I figured how to export a large file from imovie, I have an idvd issue. I followed the instructions for burning from idvd and changing the encoding to professional quality and the burn speed to x4, but I am receiving an error that states the following,
Your project exceeds the maximum content duration. To burn your DVD, change the encoder setting in the Project Info window.
Project:
- total project duration: 79:04 minutes
- total project capacity: 4.327 GB (max. available: 4.172 GB)
Menus:
- number of menus in project: 1 menus
- total menu duration: 0:39 minutes
- total menu capacity: 37.370 MB
Movies:
- total movies duration: 78:25 minutes
- total movies capacity: 4.291 GB
I have searched in the idvd forum for similar issues and I am stumped at this point. I have tried deleting the encoding assets and re launching idvd with the changed preferences, and still the same error. I know you mentioned something about free hard drive space available, and I have very little left. 4GB to be exact due to massive hours of non-edited footage. I am not sure if this is why, but I do not recall ever needing free space to burn memory onto a separate dvd. I would be more than happy if I am wrong, and it would be a quick fix. Otherwise, the technical nightmare continues. It's all a learning process and your expertise is greatly appreciated! Thanks in advance.

Burn Stops In iDVD After Edit In FCP Burn Stops In iDVD After Edit In FCP

Similar Messages

Maybe you are looking for