Burn was not successful
Hello, I recently put together a movie. I had one part of a video and added another part of it using QuickTime Pro. The videos were originally AVI files but after combining the videos in QT, the new format became .MOV. I was OK with all of this. When it came time to burn, everything was perfect. I selected the movie I wanted to add, did the whole but, and the disc had ALMOST burned. This is what happened...
It said I had about a minute (or two) left of "Multiplexing" and the disc all of a sudden pops out (with the status still saying "Multiplexing"... So, I took the disc out, went to the TV, and nothing worked. The menu doesn't even come up. It's like the DVD player doesn't even read it. However, after going to the TV to try and get this disc to work, I went back to the computer and there was a message on that said: "Continue or Cancel" and I choose "Cancel" because by this point, the disc had already been ejected...
My question is:
1) Why did the disc pop out before it was complete?
2) How do I stop it from popping out before it's completed?
3) What can I do to fix this problem? (Does it need to be in AVI instead of MOV?)
If you need any info, please let me know.
Thanks so much,
--André
Have you ever used Roxio Toast? Have you ever had Toast spit the disc back out at you? Every once in a while the app may reject the media even though everything seems to be in order and without an apparent reason or error message. It's like iDvd in this respect. Both can be very selective about what they will burn to and at what speed (although Toast is less picky than iDvd in most cases). It might take more than one attempt (sorry to say). That's why it's a good idea to simply hit continue even if it takes multiple attempts. It doesn't hurt to try a second or third attempt. It's still possible to accept the dvd. Eventually it will take the dvd and burn it exactly as requested in the first place. But then again, your own mileage may vary.
Similar Messages
-
I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message. It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location that will support this condition." What does this mean?
KrisIt means your file is too large to fit on a single layer disk.
Recompress to keep the overall size (audio,video and menus) below 4.5GB
x -
Formatting was not successful. Layer 0 exceeds the maximum layer size
I am attempting to burn my first dvd w/ dvdstudio pro. I pressed burn. Processing took approximately 25 minutes. Everything seems to be goin well. The I get the following message,
"Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition."
Can anyone help me out with this?
The following info was in the build log,
Starting DVD Build MUSICVIDEOMIXTAPE...
Compiler Initializing...
Precompiling Project MUSICVIDEOMIXTAPE
Compiling VMG Information...
Created 8 PGCs in VTSM1
Created 5 PGCs in VTSM2
Created 8 PGCs in VMG.
1 Menu(s) will be created...
Compiling Menu PGCs...
Compiling Menu#1 (Menu 1)...
Rendering Menu:Menu 1,Language:1...
Generating Transition: VTSM #01, VOB #1...
Writing VIDEO_TS.VOB
Compiling Menu PGCs...
Writing VTS020.VOB
2 VTSs and 2 Titles will be created...
Compiling VTS#1 (drivin me wild- Common & Lilly Allen)...
Muxing VTS011.VOB
Done.
Compiling VTS#2 (d12 vid mix tape)...
Writing VTS020.VOB
Muxing VTS021.VOB
Done.
Linking VMG...
Linking VTS#1...
Linking VTS#2...
Writing VTS#1...
Writing VTS#2...
Writing VMG...
Writing Layout Info...
Compile Completed Successfully
Note: The file ‘MUSICVIDEOMIXTAPE.layout’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Note: The file ‘VOB_DATA.LAY’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.It sounds like you are trying to burn a dual layer disc. Do you need a dual layer disc? (i.e., do you have more than 4.3 GB of material?) If you do then there is a tutorial at;
http://www.kenstone.net/fcphomepage/dual_layer_mediagary.html -
When burning to DVD =R DL
5.8g
Formatting finished.
Formatting was not successful. A suitable marker could not be found in the required layer break range. See the DVD Studio Pro User's Manual for more information.Do you understand about layer breaks? Check the manual on this. Also do some googling. I went thru **** with this a few months back being unable to set a layer break. Finally realized that my dvdsp project had gotten corrupted. Had to rebuild it and then it worked.
-
Error when posting - Call up of feature PPMOD was not successful
Good Afternoon,
We recently completed an upgrade to ECC6.0 and this week we have seen two cases of receiving an error when trying to post payroll to FI using RPCIPE00.
The error we are receiving is: Call up of feature PPMOD was not successful, Message no. 3G100
The diagnosis on the error message is: Feature PPMOD has been called to set the employee grouping for account determination. This call was unsuccessful and suggests that we check the decision tree for PPMOD.
While there have been some somewhat recent changes to PPMOD, I have stepped through the feature for both individuals who had this error and can find no problem with the logic in the decision tree. I've also regenerated the feature successfully. After searching OSS I found note 1243065, which is the exact error that we are receiving. The problem is that this note was included in HR support pack 44, and we're already on HR support pack 48. We also found a post that suggested we use RPCIPE00_OLD, but gave us the same error.
My next step was to post a customer message, but thought it would be worthwile to post something here and see if anyone has any suggestions first.
Thanks in advance,
-Nick
Edited by: Nicholas Petters on Apr 15, 2010 5:32 PMThe issue may not be related to the note you indicated as this note should already be included in your system with SP 48. Please check what personnnel areas the errors ees are in, and see if they're in the decision tree of 'PPMOD' .
If this looks OK, run payroll simulation for the error ee, put break-point in form 'CALL_549B' of program '/1PAPA/FEAT310PPMOD' and see what value STRUC-WERKS (pers. area) is when it fails. -
Error while releasing :-Content item was not successfully checked
Hi
I have create a ucm user "john" which has auth type "Local" and roles of
Admin
contributor
Sysmanager
"admin" role:- has Groups/rights such as
Rights.Apss.RepMan
Rights.Apss.Workflow
Rights.Apss.ConfigMan
Rights.Apps.Archiver
newgroup(RWDA)
release (RWDA)
secure (RWDA)
"contributor" role :- has Groups/rights such as
newgroup(RWDA)
public(RW)
release(RWDA)
secure()
"sysmanager" role has groups/rights
newgroup(RWDA)
public(R)
release(RWDA)
secure(R)
When I am trying to release the documents I get error such as
Event generated by user 'john' at host '192.168.21.215'. Content item <undefined> was not successfully checked in. Security group is not defined. Unable to validate user security. [ Details ]
An error has occurred. The stack trace below shows more information.
!csUserEventMessage,john,192.168.21.215!$!csUnableToCheckIn,!csSecurityGroupNotDefined
intradoc.common.ServiceException: !csUnableToCheckIn,!csSecurityGroupNotDefined
at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:1739)
at intradoc.server.Service.buildServiceException(Service.java:1999)
at intradoc.server.Service.createServiceExceptionEx(Service.java:1993)
at intradoc.server.Service.createServiceException(Service.java:1988)
at intradoc.server.ServiceSecurityImplementor.determinePrivilege(ServiceSecurityImplementor.java:795)
at intradoc.server.DocumentAccessSecurity.checkSecurity(DocumentAccessSecurity.java:110)
at intradoc.server.DocumentAccessSecurity.checkSecurity(DocumentAccessSecurity.java:67)
at intradoc.server.ServiceSecurityImplementor.checkSecurity(ServiceSecurityImplementor.java:320)
at intradoc.server.Service.checkSecurity(Service.java:2546)
at intradoc.server.Service.checkSecurity(Service.java:2524)
As per the document I have given the user required group and role permission . What more should I do to release it ?
Guidance requested
Thanks
Joseph JohnBy release you mean you are unable to checkin a document?
How are you trying to checkin the document? DIS, SOAP, standard checkin form page??
It looks as if you haven`t supplied a security group or content id on the document meta data when you have checked in the document..
You can automatically assign content ids by going to admin server and enabling auto assign id check box.
John should only need the admin role, that will give the user full access. -
Error message " Device driver software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!
Hi, I was able to reformat my iPod and that worked. I read it on one of the threads and I am copy pasting the method below:
I opened the "My Computer" window and right-clicked on my ipod, and then selected "Format". I select "Yes" to format since I don't have anything on the nano to delete anymore.
I then Eject my nano from the computer and did a restart while the nano is disconnected from the computer.
Once Windows finish loading I reconnect the USB to the nano(back of computer) which automatically pulls up iTune. It asked me to name the new ipod detected and created a playlist for that specific ipod name.
Pasted from <http://discussions.apple.com/thread.jspa?threadID=1050784&tstart=15>
Thanks! -
I have tried several times to install iTunes update 11.1.4 on my PC. I get a message saying that install was not successful and an error message of MSVCR80.dll not present, Error 7, (Windows error 126). I am told to reinstall iTunes, but nothing changes. What next? I've not had this problem with other updates requested by Apple.
I have also had the same problem with my Win 7 32 bit computer. I had great help from Apple techs in Montreal and Orlando for 2.5 hours. They helped me remove every trace of Apple products and clean the registry in two different ways. Each install gave the same problem! If Apple techs can't fix it (on some of our machines) then we are really in trouble. They promised to raise it with the "engineers" and get back to me with a solution. I am waiting and hoping. Otherwise maybe version 11.1.5 will have a fix ??
-
I got a new laptop and installed iTunes and plugged in my iPod but it won't get recognized on iTunes or in my computer, the computer says unknown device found and that the software was not successfully installed. What shall I do ? I tried reinstalling so many times and everything else I could find. Please help!
Hello MArk.wijesinghe,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Best of luck,
Mario -
I cannot get my passport to connect to eather of my PC's, one is running Win 7 Pro 64bit, and one is running Win 7 pro 32bit. both pc's give me the same driver error-"device driver software was not successfully installed" i have latest versions of Link and Blend installed on the pc's, and 10.3.0.908 on my pasport madel SQW100-1
same issue here for a z2, only windows 7 pro on virtualbox in ubuntu (linux)
very good service from sony that they reply instantly..
whats the point in a exceptional good phone with poor support??
if this poor service continues, this would be definatly my last sony device..
and build a linux version of your crappy software!! android IS linux so you have plenty developers.. -
MeetingPlace Express 2.1.1.2 Dial Out was not Successful
I'm configuring a MeetingPlace Express v.2.1.1.2 and I can't make the MPX do the call to the guests of a meeting.
I make the configuration test in: Services > Logs > Verify Configuration > Call configuration verification and show the following error:
==============================================================
==============================================================
Call-Config Report
Summary
WARNING:The H.323 ID should match the host name
Valid E.164 Address has been configured
H.323 gateway has been configured
Error: Dial Out was not Successful
Call-Config Report Details
H.323 Details
H.323 enabled : YES
E.164 address : 196
H.323 ID : mpxadmin
H.323 gateway 1 : 010.145.002.030
SIP enabled : YES
DialOut Session Summary
VUI Configuration: 250 Sessions, 250 Confs
*** VUI INTERNAL STATUS UTILITY ***
DebugMenu:
1) Quick Status of all Ports 4) Make Test Call
2) Verbose Status of Port Range 5) Show All Confs
3) Display complete Port Information 0) Quit
Enter the Command (0 -- 100) []: You entered 4.
Enter destination for your call: The Telephone Number is 196. Len is 3
Do you want specific ports? (t -- F): You entered f.
Placing Call .....Call was unsuccessful: Ring No Answer.
DebugMenu:
1) Quick Status of all Ports 4) Make Test Call
2) Verbose Status of Port Range 5) Show All Confs
3) Display complete Port Information 0) Quit
Enter the Command (0 -- 100) []: You entered 0.
==============================================================
==============================================================
That parameter could check?
Here I place information on the configuration of my network:
CUCM v.7.0 --> 10.145.2.10
Voice Gatweay --> 10.145.2.30
In CUCM > Device > Gateway --> Gateway: 10.145.2.20 | Description: Cisco MeetingPlace Express | Type: H.323 Gateway | IP: 10.145.2.20
Please expect your valuable help!
Thanks a lot!
ErnestoGhi Ernesto,
As the problem you are facing is a dial out issue on MPE, go
through the checklist mentioned below in order to confirm the configuration
is intact.
Here is the checklist :
1. Ensure that H323 GW is defined on CCM/CUCM.
Device > Gateway > find.
Look for a device name that equals either MPE's hostname, FQDN, or IP
Address.
2. Ensure that h323 Gateways are configured on MPE.
MPE Administration Center > System Configuration > Call Configuration > H323
Configuration
Ensure that h323 is enabled.
Ensure that you have entered your CCM's IPs in h323 Gateway 1, 2
3. Ensure that CCM's interface with MPE is up.
Ensure that MPE's IP Address is listed under the "IP Address" column.
Ensure that this IP Address is that of the FIRST NIC on MPE, not the second.
4. Verify that MPE has the CSS required to call the destination.
FIRST, FIND MPE's CSS:
When MPE places a call, the CSS in question is Device > Gateway > MPE-GW >
Inbound
THEN the relevant config is under Device > "Call Routing Information -
Inbound Calls" > Calling Search Space
SECOND, FIND DESTINATION PATTERN's PARTITION:
If the destination is an IP Phone within the CCM/CUCM Cluster, then the
relevant config is under Device > Phone > click on Directory Number in CCM.
If the destination is a PSTN endpoint/phone, then the relevant config is
under Device > Route Pattern.
5. Ensure that your user profile is set to allow outdials.
MPE Administration Center > User Configuration > User Profile Management >
Your User Profile > Can call out of meetings should be set to "Yes".
6. When you place a call from from the CLI, the system applies permissions
from the "Guest" User profile since mpxadmin or root are not Users within
the MPX application. To allow this to work, you need to verify two
settings:
MPE Administration Center > User Configuration > User Profile Management >
Guest > Can call out of meetings should be set to "Yes".
Ensure that the Guest profile is not in a "locked" state.
MPE Administration Center > System Configuration > Usage Configuration >
Allow Guest outdials should be set to "Yes".
Hope this helps!
Thanks,
Karthik -
when i try to install my copy of photoshop elements 1.0.1 , get the answer to install internet explorer 4.0 or more, but i use the firefox browser. by the way, the internet explorer installation was not successful with my windows 8. What can I do?
Photoshop Elements 1.0.1 seems like very old software 2001 I believe. Try asking in the Elements maybe someone there will be able to answer your question. Photoshop Elements
-
I just downloaded a new software update to my ipod touch and now the ipod and screen are frozen. I received a message that the download was not successful and now my screen is showing the blue round itunes symbol with an arrow pointing to the symbol and shows a cable below it. I have tried the restart of pushing the two buttons together and waiting 10 seconds for the apple symbol which appears and then go backs to the same stuck symbol. My computer is not recognizing the ipod either and will not connect. What needs to be done? Thanks.
Try manually placin the iPod in Recovery Mode and restore via iTunes.
Next try DFU mode and restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed" and of course there is no device that shows up either. It would be great to download my photos! I'm using Windows
Go through this support doc:
OS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538 -
HT5706 AppleTV fails updating, reports "The update was not successful."
Cutrrently my AppleTV is at version 6.0.2 (6646.81.1) connected to my network via ethernet. When I attempt to update my AppleTV, It downloads the update, begins step 1 of 2, preparing update, then it fails with the message "The update was not successful."
wait a while and try again
when one downloads something over the Internet the bits can get corrupted and in the process making the update broken the system detects that and will not try to update with the broken update
when people download things over the Internet the isp (internet service provider) they use cache the data for a while so if another one of their users or the same user download it again right away they will get the cached data from the isp rather having to transfer the data all the way from the original site this saves time and money in most cases
but it also mean if the data gets corrupted you have to wait a bit for their cache to flush before you try again
the process of isp's detecting if all of the data in their caches was valid would mean a lot of processing on their behalf making your isp bill higher so waiting a bit every now and then is pref'd in the eyes of most
Maybe you are looking for
-
New version of JDev causing JNDI problems
We just upgraded to the newest Developer Preview of JDEV and all of a sudden client code that compiled and ran fine under the old version is no longer running. I'm guessing something changed in the libraries, but I'm not sure what and why this is occ
-
How can favorites from a premium msn browser be imported into firefox?
We have been using qwest.msn.com, a premium msn browser for email. We need to move to firefox. We do not know how to import "favorites" in to the firefox bookmarks.
-
Com.apple.DesktopServices 1.3.1
Hi! several of my applications are unusable : iTunes, Bittorent, Finder, Safari, Adium while opening a file dialog typical crashreport for one of those is below. I located the crash to be in a file named /System/Library/PrivateFrameworks/DesktopServi
-
I would like to cancel the annual membership
I would like to cancel the annual membership.
-
Errors in SAPMMC for PI7 install
Hello, I have installed PI70 and It is running fine. But, when i see in SAPMMC soem errors. In "Current Status, OpenAlerts and Syslog" i am seeing red mark. But, when i check PI functions are looks ok. Is something wrong or is it ok. Thanks, Srinivas