Burned a DVD but has bad glitches when I played in DVD player

Hey-
I have the rights to the dvd I am trying to burn, I was told to use disc utility to burn a copy and it did burn it but it turned out glitchy like when someone has Dish Network or Direct TV and it rains. The picture is there but freezes and glitches and the sound is kinda there too. What did I do wrong and what do I need to use or do to burn a good copy?
My friend says they may have sent me a locked copy of my dvd and that I will have to contact the place that made it for me but I would think it wouldn't have burned at all if that was the case and I sure as **** would have had to pay for the right for a locked copy.

I made a disc image saved it and burn the copy, I followed these directions:
Insert your DVD into your Mac. Most Macs will automatically launch DVD Player. Once it launches, quit it. You should see your DVD disc mounted on your Desktop.
Open Disk Utility (Applications > Utilities). Select the DVD disc from the list on the left. You will notice that there are two DVD icons--select the one slightly indented (this is the DVD itself, whereas the first one is the drive).
Click on "New Image" in the Disk Utility main window.
Choose a name and a destination from the "Save As..." window. Keep in mind that your destination should have enough space to copy the entire DVD, which can be over four gigs.
In the "Save As..." window, be sure the "Image Format" selection is set to "DVD/CD Master" and the "Encryption" selection is set to "none". Click Save.
After copying the DVD to your destination drive, return to Disk Utility. Your new Disk Image will appear in the list on the left of the Disk Utility window. Eject the original DVD disc from your Mac.
Insert a writable DVD disc into your Mac. Select your newly created Disk Image from the list on the left of the Disk Utility window. Click on "Burn" in the Disk Utility main window. Select your burn speed and whether you would like to Verify Burned Data.
You will receive confirmation once you DVD is successfully burned and you are all set with a fresh copy of your DVD disc. Simply save your new Disk Image and you can make a copy whenever you may need it.
When I played it in the DVD player, it loaded and began to play but was distored like when the TV glitches in a storm. You could see that it had attempted to burn correctly but something caused it to not turn out right and the audio was just as messed up.
I didn't use a great quality disc but my friend burned her iMovie on them just fine. They are 16x so maybe that is my problem, not sure does this help you to know what I am doing wrong???!!

Similar Messages

  • I have an iphone 4s and the speaker has stpped working when I play music with i tunes or you fox. It works when they ring me but not when i want to listen to music :( do you know how I fix this?

    I have an iphone 4s and the speaker has stpped working when I play music with i tunes or you fox. It works when they ring me but not when i want to listen to music :( do you know how I fix this?

    Go to settings/music/volume limit tap on that.  Make sure it is set to OFF and when you tap it that the slider is at max

  • No Audio when I capture (mac) but it's there when I play back???!!!

    Hi all,
    I've just got premiere for MAC and have a slight problem when I capture.
    I can see the image, but no sound.
    When I play back the captured piece, the audio is there, it's just a hassle having to capture a whole tape when I only need one sound bite.
    Any ideas?

    What camera are you Capturing from? What is your Project/Sequence Preset?
    I also wonder if this is a Conforming issue, as you do end up with the Audio, once done. Conforming can take a bit of time, predicated on the power of one's computer, the Duration of the file and the Audio stream source.
    Good luck,
    Hunt

  • My iPhone 4S has no sound when I play music, videos and movies

    My iPhone 4S has no sound when I play music, videos and movies

    Is the slider all the way to the right??
    And no, if your phone is vibrating when you get texts/calls then you're not in Do Not Disturb.   You would see a Crescent Moon symbol to the left of Battery % if it was on.

  • Why does it say Attachment Id has bad format when I try to reply or forward e-mail from my hotmail site??

    I receive an e-mail from a friend lets say....I then send it to some friends....they reply back to me saying... Ha Ha Ha Ha....I then want to reply back but it won't send...saying...Attachment Id has bad format...yet I've sent it once already? I don't get it.

    Delete any traces of Silverlight from your HD, you will be able to send attachments normally thereafter.

  • Why does my iMac run fine in Safe Mode but has many problems when it isn't?

    If you take a look at my previous posts you will see that I have had the usual problems that many, many other iMac G5 1.8 20" Rev A owners have been recently experiencing (Kernel Panics, Screen Blurs, Screen darker at top more than bottom, etc)
    I have discovered that the only way to stop all the numerous problems that I have been having is to start the iMac up in Safe Boot Mode
    In this mode it has been running Perfect! No Crashes! No Screen Problems! It's been wonderful to get it back to normal after all the peristant problems I have had! The only thing being that you can't use sound in or out or the DVD Player with Safe Mode!
    So the question I would like to ask is:
    So does this mean that the problems I had before were just Software conflicts/issues and not Hardware ones?
    Cheers for your help
    Bob
    iMac G5 1.8 20" Mac OS X (10.4.3) 2 Gig RAM

    When you start up in Safe Mode various things aren't loaded at startup, Bob.
    Have a thinbk about which of the following may be involved in your own case:
    It forces a directory check of the startup volume.
    It loads only required kernel extensions (some of the items in /System/Library/Extensions).
    It runs only Apple-installed startup items (some of the items in /Library/StartupItems and /System/Library/StartupItems - and different than login items).
    Mac OS X 10.4 Tiger only: It disables all fonts other than those in /System/Library/Fonts .
    Mac OS X 10.4 Tiger only: It moves to the Trash all font caches normally stored in /Library/Caches/com.apple.ATS/(uid)/ , where (uid) is a user ID number such as 501.
    Mac OS X 10.4 Tiger only: It disables any Login Items.
    (from http://docs.info.apple.com/article.html?artnum=107392)
    Have a look at http://docs.info.apple.com/article.html?artnum=106464 for some more possibilities.
    You may find it worth while using System Prefernces/Accounts to creat a new admin user account and see if the problem persists with it. THis may help you narrow down the problem further.
    Cheers
    Rod

  • After installing lion I get"Attachment Id has bad format" when trying to send an attachment in Hotmail.  Any ideas

    After installing the new lion, I can no longer send attachments in my hotmail account, I get "attachment Id has bad format". Any ideas?

    THANK YOU !!! THANK YOU !!!
    I took the time to actually set up and sign in to be able to say thankyou for the info - my Apple techs up hear in the North had NO clue on how to solve my problem - sending attatchments is my business and I was out of it since Oct. 14th
    THANK YOU AGAIN - IT WORKED PERFECTLY JUST HOW YOU SAID

  • IDVD selectively won't recognize .mp4 format - how to burn for dvd player?

    Hi -
    I'm trying to burn a .mp4 movie for my gf's family so they can watch it on their TV instead of my tiny comp. After trying DiskUtility and iTunes (both to no avail, DU wouldn't even allow me to select a .mp4 format to burn on the DVD; iTunes burnt the movie, but it doesn't play on the DVD player ...). I thought I'd try iDVD, but it won't recognize the movie I'd like to burn - says the format is unrecognized. Tried with another movie, same format (.mp4) and it worked just fine.
    I'm really at a loss - I didn't expect it would be so difficult to burn a DVD! Any assistance would be greatly appreciated.
    Kind regards,
    Rax

    Alright, my results correspond with Russ' hypothesis: both videos I tried are in the same format & at the same FPS, the only difference b/w them is the audio. The one that worked is Stereo (L R), the one that does not is the 5.1.
    Unfortunately, I do not have Quick Time Pro, I just have QTP 10.1 that came w/ Lion (& an older version that I added b/c it allows playback speed control). Here, the export options are:
    480p
    720p
    iPod touch & iPhone 3GS
    iPad, iPhone 4 & Apple TV
    Audio only
    None of these were an obvious choice to me, any suggestions? I've heard something about "Toast", would this be an easier / better option?
    Thank you for on-going help. Very much appreicated.
    Kind regards,
    Rax

  • DVD Burns; no DVD Player Playback?

    I am able to burn a DVD using DVDSP4 (Universal) and it will play back on any Mac or PC I try it on. However, putting it in various DVD Players (I've tried at least a dozen) will have it only say "Loading..." , then freeze or say "No Disc" on some; others work fine. I also tried a similar project in iDVD with the same results. Is there incompatibility with Mac-burned DVDs with some types of DVD players? I have tried Panasonic, JVC and Sony DVD Players; Apple, JVC and HP DVD-R's and different combinations of each.

    It is strange that so many different players are having problems with so many diiferent forms of media, usually it is just one or two combinations and not that prevavlent.
    I know some people who get iDVD to work better than DVD SP on a problematic player they have, but it is usually just one (i.e., they have one of many players act "weird") And I tried to get DVD SP discs to work on the problem player, but in fact it was sporadic as you have described.
    If you can go through each step of how you are making the DVDs, compression rates, Dolby/apac rates, burn speeds etc, there may be something there (you should encode .mov outside of DVD SP)
    On thing to try is to put a small few second move/FBI warning or something on the dsic, some people have indcated going to first play of a menu will mess up players for them

  • My Iphone 5 glitches when i play games

    My phone acting weirdly while i play games like real racing 3 etc. It kinda look like this but not bad as this. Is it hardware problem? Should i sent my phone to the technical service?
    http://www.youtube.com/watch?v=9UBrUuVOVq4
    Sorry for my english.

    Hi zayedkhan2003,
    Thank you for using Apple Support Communities.
    To troubleshoot this issue where you're experiencing erratic touchscreen behavior, please follow the troubleshooting below.
    Restart your device
    Hold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
    If you can't restart your device, reset it by pressing and holding the Sleep/Wake button and the Home button at the same time for a least ten seconds, until the Apple logo appears.
    Clean the screen with a soft, slightly damp, lint-free cloth.
    Avoid using the device while wearing gloves, with wet hands, or immediately after applying hand lotion.
    If you have a protective case, or if you are using a plastic sheet or film on the display, try removing them and testing the device without it.
    If the steps above don't resolve your issue, please schedule a service appointment with an Apple Retail Store for evaluation. If an Apple Retail store is not an option, contact Apple to find out your best service option or see the Service FAQ for your product.
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    Cheers,
    Alex H.

  • Exchange 2013: owa page shows up but returns bad request when logged in

    Environment: Exchange 2013 CU6 /Windows Server 2012 R2
    Just installed the patch yesterday, owa and ecp was working fine after the install but it broke for some reason.
    was able to get ecp and powershell running but still cant up owa.
    owa website can be accessed online, but once logged in it will throw errors below:
    Firefox:bad request
    IE:https://mail.domain.com/owa/auth.owa
    tried to recreate Virtual directories for ecp and owa but to no avail.
    both default website authentication shows basic,forms and fba (for ecp/owa)
    checked IIS settings: no redirection details for both http redirect by default didnt touch it as well.
    just wondering if anyone experienced the same and how they got it to be resolved, also is there a way to check what is the current authentication method for the backend server
    not sure if i am checking it correctly but when i go to IIS>exchange back end, i cannot enable basic and forms as the same time...
    thanks in advance

    Hi,
    From your description, I recommend you use the following cmdlet to change the authentication method of the "owa" virtual directory to Windows authentication.
    Set-Owavirtualdirectory -identity "servername\owa (Exchange Back End)" -WindowsAuthentication $True -Basicauthentication $false -Formsauthentication $false
    And then run the following command on both the Client Access and Mailbox servers to restart IIS and check the result.
    iisreset /noforce
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • When i download itunes 10.6, it downloads but has an error when it installs. What can i do to fix this?

    hi, i tried to download itunes 10.6, the download worked fine, but halfway through the installing it stopped and gave me an error. does anyone know how to fix this?

    but halfway through the installing it stopped and gave me an error.
    What does the error message say? (Precise text, please.)

  • My iPod touch has no sound when I play music or use the iPod touch at all.  Yes, the volume in the "sounds" is all the way up.  It has not been dropped or gotten wet.  I turned it off and on.  now what?

    My ipod touch (4th generation) has no sound.  I have turned it off and on.....I have the volume up in the "sounds" area.  When I push the side volume button, there is no image that appears in the screen that shows that I am either raising or lowering the volume.  Do I need to just rest the ipod touch as a new device? Or is there someting else I can try?

    And, now when I do press the side volume buttons, the image appears but with the words' "sound effects."  what does that mean?

  • Unsupported format after burning on DVD Player

    I burn many discs on iDVD and always do it the same way - I have found that a few of the discs are unable to be read on my player after burning.  So some work fine and some cannot be read in the Player.  I get the message "Unsupported Format" on my player.  Any suggestions?

    If iDVD didn't have sound before you authored the DVD, you won't have sound after the DVD is created.  Did you create a self contained Quicktime movie out of your editing system before importing into iDVD?  Did the Quicktime file have sound in the Quicktime Player?  Here's an article I wrote about transferring your HD footage to DVD.  You need to break the process up into steps to avoid problems.

  • Artwork shows ok in itunes and ipod album view but not in ipod when song plays

    Hi...
    I've noticed somethig wierd with my ipod classic 160GB (v1.1.2).
    I have an album with correct artwork. All songs have their artwork. iTunes shows this ok, when getting info song by song.
    When I go to the album in ipod, I can see the artwork next to the album name.
    When I actually play the album, the first song, the artwork appears ok.
    From the second song on, artwork will not be displayed.
    Any idea why this could be happening? I noticed this for several albums.
    Regards,
    Leo

    Perhaps this earlier post by Zevoneer may help

Maybe you are looking for

  • Can't start iPod in Manual Mode

    I can't seem to start an 30GB iPod in Manual Mode, even while pressing the command and option keys while starting up. Any ideas on how to force it into Manual Mode?

  • How to know licensed machines?

    I own one Photoshop CS4 and two Photoshop CS6's on several machines of my family. I am aware that each packege can be used for two machines. Now, is there a way to know which machine has which pakage's license?  Am realy confused. And, some machines

  • CHIMES OF DEATH

    Nothing is happening when I try to turn on the computer. All I get are the "CHIMES OF DEATH." I have attempted to zap the pram, use Norton, & reinstalling the OS, but the screen just stays blank. ANY SUGGESTIONS BESIDES dumping it and getting a new M

  • DB Adapter Binding Fault Not Working

    Hi, I am trying to run the application "InsertWithCatch" bpel sample in 10.1.3.1 and after testing it's always generating the same exception as below for any Database error: javax.transaction.RollbackException: Transaction has been marked for rollbac

  • How to develop Language Resources in Crystal Reports

    Dear Experts, I have develop crystal report in english language now  i have requirement to develop same in Arabic langauge with its currency symbol. Our application is hosted in USA so by default it pulls $ in our all reports. Could please provide so