Burned cassette sound problems on Shuffle

The situation: I have burned a lot of old cassettes(factory made) and put them on Shuttle thru iTunes. Problem: I only get sound in left channel of ear pieces of pod. Apple gave me a new pod and ear sets . And 3rd party ear pieces do a single side too. Still same problem. Use Final Vinyl and/ or Audio In for software. Every other format used with these cassettes(burnt cd, iTunes, etc) play both ear pieces. Is this me in recording, architecture of cassettes, or what? Factory cd's play both ears. Any help is appreciated. Thank you.

I am trying to remember all the gyrations I went through. As I remember there are 2 ports and a switch on the side of the iMic. I played around until I got a combination that gave me the best sound to my ears. I think one port is for a microphone and the othere is for and audio analog like a turntable/cassette input. It has been 18 months and I am on the road w/o myiMic infront of me. I am sure that there are instrustions from Griffin online to help you out. My iMic was a USB 1.1 and it worked fine. I used a PB Ti667 w/512 RAM. I found that not all turntables were up to the task of good sound output to the iMic. My cassette deck (hi end) was as good as the tape it came from. The tapes were my road tapes from early 1980's. The quality was very good considering the age (20+ years). I can only suggest otherwise that the patch cords are in good condition and performing up to spec.
MJ

Similar Messages

  • Problem:  While creating a project in iDVD, it plays perfectly on the computer, but after burning the sound is off.  Video soundtrack is not in the right place.  HELP!

    Problem:  While creating a project in iDVD, it plays perfectly on the computer, but after burning the sound is off.  Video soundtrack is not in the right place.  HELP!

    Have you checked out the topics at the right in the More Like This section?
    OT

  • IMovie sound problem - a solution discovery

    After downloading a video in iMovie and completing all the processes steps that I wanted to include, I tried to burn this project in iDVD. A problem arose with the sound when I played the iDVD preview. The sound was grabbled and distorted. I contacted AppleCare and got several possible solutions, but none of these solve my sound problem. I even tried to send it back to my camcorder and use my older G4 computer to make a DVD. However, the program could not be transferred to my camcorder either.
    Now a strange discovery was found. On the sound line in iMovie (where I had recorded my voice program) was a small yellow dot. Yes, very small yellow dot. I wondered why this was there and clicked on it. The dot move up to the top bar where my video clips were stored. I thought maybe this had changed things, so I rendered the program to iDVD again and previewed it. The sound problem was gone. I successfully burn the program to DVD and found it was okay to view. I have shared this discovery with AppleCare and was asked to share this information in this discussion forum. I hope that others may benefit from solving a similar problem. I still don't know how the tiny yellow dot got on my sound line. If somebody knows, it could be interesting and helpful to avoid this problematic yellow dot. Good luck - Seapark36

    Welcome to iMovie Discussions!
    Thanks for mentioning this business of the "..very small yellow dot".
    This sounds like a 'Bookmark'. Bookmarks can be placed on the Timeline, where your video plays, along the bottom of the computer's iMovie display, by purposely - or accidentally! - pressing the Apple key and 'B'. Bookmarks let you jump instantly back and forth through your movie (..to the next Bookmark..) by jumping forwards to the next one with Apple and ']', or backwards to the previous one with Apple (..also known as the 'Command' key..) and left-square-bracket '['.
    They have, though, been known to interfere with proper playback when exporting (..'Sharing'..) to tape or to iDVD, so Karl's advice has been to delete all bookmarks when the editing's finished and just before 'Sharing'. All bookmarks can be instantly deleted by going to Markers on the top line menu and clicking Delete all Bookmarks.... (An individual bookmark can be deleted, once you've jumped to it, by pressing AltAppleB.)
    The little diamond-shaped dots look almost identical to Chapter Marker diamond dots, which you can create by clicking the 'iDVD' tab at the lower-right beneath the right-hand 'pane' of the iMovie window and then clicking 'Add Chapter'. That creates a chapter marker to separate a particular section of your movie when it plays back from a DVD you've burned.
    The Bookmarks and Chapter Markers seem (..to me!..) to have a very slightly different colour - maybe one's green and one's yellow: I don't know; I'm red-green colour blind, so I can't tell yellow from green, or green from red!
    So perhaps you accidentally created a bookmark by unintentionally tapping the Apple key and then the letter 'B'. Removing it, and all other bookmarks, is generally acknowledged to smooth the process of exporting (..'Sharing'..) a movie project.
    Thanks for posting your observation, and reminding us about how important it is to delete bookmarks before exporting!

  • Sound Problem Plus Memory Problem

    I've also posted this same issue at the EVGA website with no help what so ever yet. Also if it's ok I'm having the above mentioned memory problem that it probable not related but if anyone does have good input I would love to hear. Hope this doesn't break any rules, didn't see anything in the listed rules thread. So here it goes.
    Ok I'm having a few minor but very perplexing and annoying problems. I have recently built a new rig to include the following.
    Windows 7 64 bit Home Edition
    EVGA P55 FTW Intel P55 Socket LGA56
    Intel Core i5-750 2.66Ghz 8M LGA56 CPU
    Corsair Dominator 4GB DDR3 PC2800 (2 x 2 GB sticks)
    Ultra LSP750 750w Power Supply
    Seagate TB Serial ATA HD 7200/32MB
    Cooler Master HAF 932 Full Tower Black Case
    Galaxy GeForce GTS 250 52MB PCIe x2 (SLI Setup)
    BFG - NVIDIA GeForce 9800 GT GB GDDR3 PCI Express Graphics Card (Physx Setup)
    PROBLEM ONE:
    This one I had a lot less that I was able to actually try because it just confused the crap out of me. So I started by going to test my sound. I'm running an optical cable from the on board sound port to back of my sony surround sound system. I get sound from my left and right channel but nothing from the center, rears or sub. So figure no biggie just need to change the configuration from 2 speaker stereo to 5. surround sound. Guess what... the option isn't there? WTF? A sound card with an optical port with no 5. support? So went online found the drivers for the sound on the mother board and tried reinstalling thinking maybe somthing was wrong with the drivers on the CD. Well it still didn't work. So I figured what ever, I got an external sound card that I know works with Windows 7 since it was on other desktop and hooked it up. Its a Creative - Sound Blaster X-Fi Surround 5. External USB Sound Card. Well it installs fine and I go to test it. Yep you guessed it! Still only sound from the left channel and the right channel with no option for surround sound. So I was able to find updated drivers for that and ran em. Well now I have an option for Surround sound with side speakers only no rear. Oh but it doesn't really matter because the left and right channel are still the only ones able to produce sound. And yes the speakers work I turned on my X-Box 360 hooked up to the same speakers and LCD tv and played COD4 with full sound working fine. So something else has to be happening I just have no idea.
    PROBLEM TWO:
    The second problem was with the memory. Everything booted fine but it initial only detected 2 GB. By the way I had them installed in slots and 3. So I shut down and popped em out checked the copper connectors everything looked fine and reseated the chi
    ps.
    This time during the boot up I checked the BIOS. It saw all 4 GBs of memory. Continued into Windows. Windows now saw all 4 but only .99 GB was available. Now the only other time I've seen anything like this was with on board video sharing the memory, and even then it wasn't half of the systems total memory. I then tried shutting down and putting the chips in 2 and 4 just see what would happen. Well I got an EA post error on the LED, couldn't even boot. So I figured o'well power down completely and tried to run the memory in 2 and 3 to run it out of dual channel. I was able to boot but still had the same issue. .99 GB available and still saw all 4. At this point it was just getting silly so I figured ok I'll download the new BIOS with my laptop, burned it to a CD. Booted the desktop and ran the BIOS flash. Update seemed work fine, honestly the BIOS didn't look much different and I didn't take note of the previous version before I did it so I can only assume it worked. However it did not fix my problem. So I'm still stuck at windows seeing 4 GB of memory with only .99 available.
    Anyway... I'll keep trying to get this working and hunting around online, but I'm really hoping you all have some ideas. I'll be trying to call EVGA today for some help too and possibly Corsair. Thanks in advance for the help!

    Hello,
    cannot help with the sound problem.
    For memory, I've got almost the same thing but with 4 sticks of 2gb and only 2 detected on an ASUS P7P55D deluxe.
    Bios was my issue but I needed to do this (but with pairs of sticks instead of sticks) after the bios update to finally get my 8gb under windows:
    Make a clear cmos. Then boot the computer with only one stick of ram in the port .
    If everything is fine, turn off and add the other port of the same color for dual channel.
    If it does not boot with the 2 sticks in the port of the good color, try to switch ports again. Maybe one stick is dead?

  • Battlefront WARPED SOUND problem

    Hi,
    Im baffled by this one, hopefully someone can help me ?
    I loaded Battle front for my G5. I downloaded their(aspyr) latest update/patch.
    I also check their Forum for discussion regarding sound problems
    I also am running a G5. 2.8 ghz, 2gig ram, ati 9600 pro with UPDAED DRIVERS, and LATEST QUICKTIME for my current OS.
    PROBLEM::::
    When i launch the game the SOUND is WARPED, in sound OPTIONS i click on sounds to adjust and sounds are DELAYED and WARPED.
    It sounds like a cassette tape player with dead batteries
    In game play its the same, WARPED SOUND all over the place.
    Please, how can I fix this ?
    Thank You

    Hi,
    After weeks of no bother, I had a similar issue, with the same game, on my G5 iMac...
    It was resolved after the disc permissions were verified and then repaired.
    Applications - Utilities - Disc Utility...
    Hope this helps
    Tony

  • MSI neo4 plat(non sli) sound problem.... and other problem...

    hi
    (sorry for my poor english)
    FIRST ISSUE
    ok here is the deal, i got no sound when using the rear panel of the mother board... but when i use the front panel of my case there no problem and i get sound....
    after reading a lot on sound problem i try first to change my bios so i check the 1.8 and the 1.6 but still no result... , i also try to use the nvidia sound drive instead of the raitek one.... but still nothing ... in the system all appeare to be ok, windows dont detect any conflict on hardware on so one... even the nvidia mixer equaliser move... but no output...
    i also read a litle about the compatibylity issue betwen the mobo and the atx2 PSU standard with the using of the 5v pin...,but as far i read it seem that this is only on the sli version...do this issue also concernt the non sli version ?can this explain my problem ?
    SECOND
    i got from time to time a bleu screem with the message DRIVER IRQL NOT LESS OR EQUAL.... can someone now what can cause this ?
    thank

    Hi!
    I am also facing this problem with my K8N NEO4 Platinum Ultra.
    I have even tested my PC with a PSU which is having -5v in it's rating.
    I have also requested a help from MSI Support.
    Their & My reply is as follows.
    But still my problem could not be solved.  My sound card as per the OS works fine and produces output.  But no audible output for humans to hear.
    This is the case with both front and rear panels.
    I have even sent the MB for RMA but here in India, people are fools.  Even from RMA the board was shipped back in the same faulty condition.  What to say?  Whom to curse?  Only money and 20days were spent waiting for repair and in wain.
    If any body can help it will be very nice.
    Here is my reply to MSI:
    My K8n Neo4 Platinum Ultra - earlier was giving good quality sound output. Later after 15 days of using this board, it does not give any audible sound at all. But through headphone socket of cd player I am able to receive good quality sound.
    And also while using CD Player to play audio tracks, the output is very intermitent and feeble with lots of cracking noise and poor quality audio is heard.
    Through Windows Media Player no sound is heard at all.
    I reinstalled win2000/Win2000Server/Win2003 XP Server. In all the platform sound problem exists. Any solutions?
    My PSU has 20amps in +12V rail and has no -5v. 24 pin adaptor with 400W.
    SATA HDD 80GB WD. 256*2=512mb DDR 400 Ram.
    CPU AMD 3000+ Winchester core.
    Thanks in advance.
    REPLY FROM MSI:
    Dear SoftWheels:
    Thank you for contacting MSI Technical Support.
    With regard to yoru concern, we would like to know before the onboard sound function abnormally, if you have made any adjustment to your system hardware or software?
    And at this time would you please try to un-install the sound driver in the Add or Remove Program, then install the ALC Series AC'97 Audio Drivers refer to the link below, after this please first check if in Device Manager there is any yellow mark.
    http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=637&kind=1.
    AGAIN MY RESPONSE TO MSI:
    Dear Sir,
    Thanks for your reply. But reply does not solve my problem. I have tried all that you said in your reply.
    I have done nothing to hardware. No electrical problems or burning.
    Due to no sound, I have even totally zero filled my SATA hard disk, updated bios, re-installed

  • Sound problems since downloading newest iTunes

    I recently downloaded the newest version of iTunes. Since then I have
    been having sound problems with my computer. Sound through the monitor
    is ok. Sound through the speakers is really low (ie: need to turn
    speaker volume way up to hear music). I tried burning a CD using music in
    iTunes and the CD volume is so low that I need to turn the speaker
    volume (in my car/stereo) way up to hear the music. Are there any
    adjustments in iTunes that I can make to adjust this volume? Is this a problem
    with the newest iTunes version? Should I uninstall iTunes and if so
    can I reset to an older version so as not to risk losing my music? I
    have tried listening to other sound bites - like movie trailers - since I
    downloaded this new version of iTunes and the sound volume is very low
    through the computers speakers.

    Go to a low volume song and see what the volume setting on the song is...(it's under options in get info)...if the setting is uniformly low, select all your music and then select get info, and you can raise the sound an all of them at once...
    Good luck!

  • I have sound problem in My Cq40-144TU Laptop

    Hi,
    I have Cq40-144tu laptop. i am't hearing sound from internal speaker but sound is hearing from headphone. I have configured my system many time. Last got to shop and they also format it and reconfigured but still this problem is showing. 
    But I was hearing sound from speaker when i chat in gtalk and then i heared sound from window media player and other application also for 5 to 10 second only. every time some text is recieved i hear sound for 5 to 10 second.
    please tell me what is problem in My Laptop. i have window 7 ultimate operating system.
    Please help me sir

    What sound problem - no sound on anything, no sound on some apps ?
    Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
    And for future info typing in all capitals is considered to be SHOUTING

  • Desperately need some help!! iTunes/Quicktime/iChat/Sound problems....

    So, yesterday, I was online, on google video, and when I pressed play on the video, there was no sound, but the video worked...the same was true on every video site i checked. My computer volume was at max, and I even tested the speakers to make sure they were on, and they indeed were.
    I thought that was odd...but then the problems really started.....
    After that, I clicked on my iChat icon. It bounced once, and did not open. The same thing happened when I clicked on iTunes. 1 bounce, and then nothing. I checked to make sure all of my iTunes mp3 files were on my computer....they indeed are all still here, bit nothing I can do opens iTunes. I've run disc utilities, and disc repair...according to that, everything is peachy-keen on my computer.....but iChat and iTunes STILL will not open, and there is still no sound on anything.
    Now, i'm leaning towards the archive and install option....or even just backing up what I want to save, wiping the drive, and starting from scratch.....but i'd really like to not have that happen.
    (and, as a side question, if all I want to save are images, several documents, and many mp3 files, would everything be okay if I just backed them up on an external drive, and then loaded them back on to my computer after reinstalling OS X?)
    Sorry about the length of this, but I am at my wit's end, and I have no idea what to do.

    by third-party, do you mean things I installed that are not manufactured by mac? If that is the case, I have microsoft office, Smart Music, Flip4mac, and Senuti.
    I got rid of Flip4Mac to see if that affected my sound problems, but it did not. So, as of now, my problem remains the same...

  • HT3983 i have a sound problem when i install windows 7 32 bit on my imac

    i have a sound problem when i install windows 7 32 bit on my imac

    Did you download and install the Windows Support software? First step in Bootcamp Assistant is to download the support software. Then did you install the support software from within Windows?
    Read the Bootcamp Install instructions. http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

  • Sound problems on ProBook 6550b, running on Win 7 Pro x32bit..

    I have been getting very similar sound problems on my notebook as posted by most: internal speakers work on original Audio HD drivers, but there is no sound when I connect external speakers or headphones. I up-graded the audio drivers to IDT HD Audio and I get sound coming from external speakers or headphones, but nothing from internal speakers.
    I have tried everything from reporting the problem on public forums, live help, and done this or that, but nothing changes. It's so very clear to me that it has to do with audio drivers, which don't seem to work appropriately to cover all aspects of sound output.
    I also, often, get this loud, weird, irritating noise and a frozen PC when I am playing music with the notebook, while on the internet. The best I do is not to do both at the same time. I have seen similar problems on blogs, but tangible solutions are NOT offered!!!! Please help...

    Audio Switching coudl be due to several reason. if you have tried latest audio drivers and latest Video drivers from hp.com, i suggest you to get audio board replaced for your computer.
    Hope it helps.
    Regards,
    Waseem,
    I work for HP.
    **Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Regards,
    WW
    “I am an HP Employee“
    ***** Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

  • When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can you please help me?

    When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can anyone please help me?
    Sincerely,
    Eric

    Run this when you have the problem and post the results here.
    EtreCheck
    This will tell us what is loaded

  • Any resolution to the sound problem?

    I have been having the same sound problem with my Mid 2010 Mac Pro tower ever since I got it.  I have been in touch with Apple and have been told that they are familiar with the problem, but that they are still working on a fix.  The problem is that I have external speakers, and every time I shut down and then start up again, I have to go to preferences and physically change the sound output to go to the speakers.  I have also been tole that the Mac is supposed to sense the external speakers and go directly to them.
    Is there anybody else out there with this problem, and has been able to resolve it?
    Thank you.

    I have a 2010 Mac Pro and use the stereo line out jack in the back of my machine for my speakers with no problem.  I don't recall any problems setting it up.  But check the Audio MIDI Setup (in your utilities folder) to see if you can set it from there (should be able to).  Not sure why the preference wouldn't stick.  And I don't believe there is automatic detection of an attached sound output device where the sound preference switches to that (unless maybe the front jack which I never use).

  • Please help iPhone 5 sound problems

    iPhone 5 sound problem: my iPhone 5 noise is only coming out thru the ear speaker and will not come out of any of the other speakers on my phone i say again it will ONLY come out my ear speaker it does it in games and in videos in music in everything! Ive reset the phone and went thru all the settings and everything to try to fix with no luck at all please help me!

    fdisk formated and reinstaled windows 3 times. fresh install each time i installed a sound card. so I dont think lingering drivers is the problem which also means dx9 has been installed fresh each time.also I have been dealing with this for nearly a month and I am at a loss.

  • Sound Problems on iPad: how to fix, easy [video]

    Hi dear iPad user,
    Most people will, eventually, have sound problems: the cause can be complex as a 'miss-behaved' app that messes the sound engine or as simple as the iPad being forgotten on Mute/Volume Down.
    I used to help family and friends to fix their iPads' sound problems by sending them 'text' instruction steps... lots of times they ended up calling me on the phone...
    So I made a video (short: 1m40s):
    https://www.youtube.com/watch?v=FjBP-Ncj_fE
    It shows:
    how to unmute the sound (even if the side-switch locks the rotation of the screen)
    how to put volume up
    how to close all the apps (in the case there is an App messing with the sound system)
    how to reboot the iPad (ultimatelly fixes hard cases of messed sound system)
    What it won't fix: if you have a hardware problem...
    If you do all the steps and you get NO SOUND AT ALL, please, try also checking if you car listen sounds using a HEADPHONE (you know are working conditions). If you can listen to sounds in the headphone but no sound at all in the iPad's built in speaker, well, there might be a hardware problem and you should look for help on an Apple Retail Store or other official technical support available at your location.
    Hope this helps!
    Everson.

    UPDATE: fixing iPad Sound after iOS 7
    http://youtu.be/SDf1LDcE95Q
    (1min 36sec)
    It covers the basics:
    checking side-switch / mute / "Control Center"
    volume all up
    ...and also the worst cases:
    closing all apps (for rare cases when a single app might render the sound system instable)
    rebooting the iPad
    So, don't get desparete: try the things in the video.
    There are people who reported having forgotten an audio-bluetooth connection activated with a turned-off sound-system or speakers... or forgot Air-Play turned on... so be sure you disengage bluetooth and/or airplay.
    On the 'hardware side', dirty dock connector (30 pin) can make the iPad 'think' it is connected to external audio - if so, cleaning it with a dry toothbrush can fix. Also, moisture in the headphones connector can make the iPad switch to 'headphones' even without headphones connected, making it silent: check if you can hear things with headphones plugged in - if so, try gently inserting and removing headphones a few times and check if you get sound back to iPad's speakers alone.
    Good luck to everybody! Audio problems are quite common - fontunately they are easy to fix.

Maybe you are looking for