Burned dvd gets error "not supported"

a friend gave me a dvd of an event that he recorded on his camcorder. i copied the dvd but the burned copy will not play in idvd 5 but the original will. the copy gives an error of "media not supported" or something like that. isnt it an exact copy?? do i need to try and import the video ts and audio ts files into imovie?

i copied the dvd
How did you 'copy' the DVD? iDVD isn't for copying DVDs - Disk Utility is for copying DVDs.
Unfortunately, Disk Utility doesn't seem to like to copy DVD+R discs. Toast is your best bet.
F Shippey

Similar Messages

My Matshita Optical drive gives me error messages that burning DVD's is NOT supported ?

I record and burn audio weekly. I dried burning DVD projects and i get the repeated error message the the drive does not support DVD burning.
Same result trying to burn from the Finder or Disk Utility. Anyone have a work around?

Do you get this error message with all current burn attempts, or simply with your most recent project?
If not, a PRAM reset has been known to be helpful.
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
Release the keys.

Premier Elements 12 Cannot burn DVD Get error message of internal software failure

Cannot butn DVD with Premier Elements 12 Get error message of internal software failure.

Great news JMD103.
There should be a big red pop-up, when one adds a Stop Marker to the end of the Timeline, saying "Do NOT do that!" That Stop Marker will almost always yield a failed Project output to DVD.
Good luck, and happy editing,
Hunt

My matshita uj846 super drive wont burn dvd. get error

my super drive wont burn dvd . and i get an error : sense key medium error sense code =0x73,0x03 for cd it work fine and read dvd ok just wont burn dvd of any kind tryed differrent makes but no result .. help pls

Hi and welcome to the discussions!
Google is your friend...
I found this on a Roxio forum, but it offers the best advice I have seen anywhere about this error.
Basically, it is most likely the media or the speed you are trying to burn at. It could be a few other things, but those are the most likely culprits.

I am try to burn a dvd from iPhoto in iDVD, when I click burn I get error message I don't have SuperDrive and dvd is ejected. I have burned dvd's before. What am I doing wrong?

I am try to burn a iPhoto slideshow on to a dvd in iDVD, when I click burn I get error message and dvd is ejected. I have burned dvd's before. What am I doing wrong?

error message I don't have SuperDrive and dvd is ejected
If you don't have a SuperDrive you will not be able to burn DVDs.
Did iDVD come preinstalled on your Mac? If it did then you should have a SuperDrive and be able to burn DVDS. Check the Disk Burning section of System Information
to see what you can read and write with your optical drive:
OT

HT5287 If DVD Movies, Audio CD's and even burning CD and DVD's are not supported, what is the point of DVD & CD Sharing then? Wouldn't it just be better to remote in or use a thumb drive if it's only able to be used for data transfer?

If DVD Movies, Audio CD's and even burning CD and DVD's are not supported, what is the point of DVD & CD Sharing then? Wouldn't it just be better to remote in or use a thumb drive if it's only able to be used for data transfer?
Or am I missing the bigger picture?

As long as you have a Superdrive or an external burner/drive, burning, watching, installing, etc. from CD or DVD will work just fine. And so will sharing.

Error: HTTP method GET is not supported by this URL

Hey,
I am attempting to overload the doGet method with a Wrapper class I created for HttpServletReponse that extends it of course and I receive this error: "HTTP method GET is not supported by this URL". I figure you can't change the method as I have but I am curious if there is anyway I can go about to accomplish what I am trying to do. Basically I just need to extend the HttpServletResponse so that it contains a few more variables and such.
public class test extends HttpServlet {
    public void doGet(HttpServletRequest request, XmlServletResponseWrapper response) throws ServletException, IOException{
        response.setContentType("text/html");
        PrintWriter out = response.getWriter();
        out.println("<html>");
        out.println("<head>");
        out.println("</head>");
        out.println("<body>test</body>");
        out.println("</html>");


public void doGet(HttpServletRequest request, XmlServletResponseWrapper response)
is not the same method as
public void doGet(HttpServletRequest request, HttpServletResponse response)
The servlet container is going to call the later method and since you did not overwrite it to provide an implementation it sees the GET request as not being supported.
what you are looking to do is something like this:
public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException{
        XmlServletResponseWrapper myResponse = (XmlServletResponseWrapper ) response;
        myResponse .setContentType("text/html");
        PrintWriter out = myResponse .getWriter();
        out.println("<html>");
        out.println("<head>");
        out.println("</head>");
        out.println("<body>test</body>");
        out.println("</html>");

Getting a Not Supported error box when trying to link a subreport to the..

I am trying to build a subreport off of my main report. I am trying to link my subreport stored procedure to my main reports stored procedure. All of the paremeters on the sub report SP are of the same data type of the fields I am linking my parameters to in the main report SP. After I set it all up and go to preview it I get a "Not Supported" error box that pops up. Then I click ok and all i have is a blank white page. Does anyone know what is not supported? This happens when trying to build this report in crystal 2008. I even tried building this same report in crystal 10 and it works perfect. I don't know what I am doing wrong in the crystal 2008 environment. Please help

Thanks Bill. This fix resolved my issue.
I would award some points, but I guess as I didn't post the original question there is no facility to do this. Shame.
Appreciate it, Brendon.
Edited by: Brendon McEvoy on Apr 23, 2009 1:39 AM

GRMG RFC Configuration "HTTP method GET is not supported by this URL"

Hi All,
when i create the RFC Destinaton for SLD with regards to GRMG Configuration and test the rfc i get the Reason code 400 with error "HTTP method GET is not supported by this URL".
Even if i call http://hostname:port/sld/rtc in the browser i get the same error.
RFC Details:
Target machine:Host
Service No: port no
path prefix: /sld/rtc
My other RFC destinations for rwb,IR,ID,Adapter Engine works well.
I would appreciate your suggestions on this
Aravind

Hi David,
I feel sorry to wake this thread up after long time.
It's the same situation, connection testing for SLD returns 400 "HTTP method GET is not supported by this URL".
However, CCMS hearbeat seems to work fine with SLD. It returns green.
I have a question here. Is it OK if we leave it that way without changing GRMG?
Is there any potential problem, or side effect when the RFC destination returns 400?
Thank you very much,
Teyun

Dvd player "disc not supported" after update

This has occured after downloading the latest updates of:
quicktime 7.1.3
iTunes 7
front row
mac the ripper-deleted this straight after as well, hadn't used it though.
I am talking about 'purchased DVDs here that used to open in 'dvd' straight away. As soon as I downloaded the above I get-disc not supported.
What is going on?

the first thing i would try is going to disk utility in utilities, selecting the macintosh hd, then clicking on repair disk permissions. if that doesn't help, try booting to open firmware holding apple-option-o-f and then typing in the following commands--
reset-nvram (hit return)
set-defaults (hit return)
reset-all (hit return)
the last command restarts the computer. let me know how that is going. [ 8 ) ]

HTTP method GET is not supported by this URL

hi.. I am trying one Cookie example.. I m ready with the class file.. and I have deployed it in Tomcat.. but when I am trying to run this the error "HTTP method GET is not supported by this URL" is coming..
Pls give some clues so that I can run this....

Implement HttpServlet#doGet() in your servlet.

Problem:HTTP Status 405 - HTTP method GET is not supported by this URL

Hi
I m beginner.I try to invoke servlet using HTML page with doPost method .I put the html file in Tomcat4.1/webapps/root and put the class file in Tomcat4.1/webapps/root/WEB-INF/classes. So when i put the url in the browser the html page is diplayed but when i sumit it to open the servet it gives this error HTTP Status 405 - HTTP method GET is not supported by this URL.I give the servlet name and class in web.xml also have done its mapping but still it is not working.Whereas the simple servet runs like HelloWord but when i use html page to run servlet it does'nt work.
Plz help me out.
Thanx

Hi,
I have also encountered this problem while running my web-application under tomcat 3.3.2. My application is resided in webapps directory. And servlet class is placed inside <app-dir>/WEB-INF/Classes/com/rEWebSite/Servlets.
<web-app>
<servlet>
<servlet-name>
LoginServlet
</servlet-name>
<servlet-class>
com.rEWebSite.Servlets.LoginControlServlet
</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>
LoginServlet
</servlet-name>
<url-pattern>
/Login
</url-pattern>
</servlet-mapping>
</web-app>
This is script in web.xml file. And after clicking on the link it is showing http://localhost:8080/<app-dir>/Login .
If anyone knows a solution, plz reply me.

I get accessery not supported by ipadwhen i plug indigital av adapter

I get accessory not supported by ipad when I plug in digita av adapter to watch netflix moveis

Still not working. My adapter shows as an apple A1422. I can successfully plug it in to an iPad 2 with an older IOS but mine which is on 8.1.2, gives the error "This accessory is not supported by this iPad." I tried turning off the iPad and connecting it to the tv before turning it on. When it is turned on, it displays on the tv for a moment, then the message pops up and no picture is on the tv any longer. Clicking ok does not change the lack of a picture On the tv, but I can use the iPad as normal.
I've tried the adapter on a different iPad 2 that is not on IOS 8 and no message appears.
Help, please!

Crystal Reports 2008 Formula in Cross-Tab Error Not Supported

I have a crosstab that was created in Crystal XI and when I opened the report in Crystal 2008 I receive an Error "Not Supported" when I removed the fromula that was in the Crosstab the report displayed. The following is the formula that is within the crosstab:
If {VWR_PPS_VISIT_SCHEDULE.COHORT_NAME} = '(No Cohort)' THEN
    If DistinctCount({VWR_PPS_VISIT_SCHEDULE.COHORT_NAME},{VWR_PPS_VISIT_SCHEDULE.PROPOSAL_VERSION_ID}) >1 then
         {VWR_PPS_VISIT_SCHEDULE.COHORT_NAME}&" "&{VWR_PPS_VISIT_SCHEDULE.VISIT_NAME}
    else
        ""&" "&{VWR_PPS_VISIT_SCHEDULE.VISIT_NAME}
else
    {VWR_PPS_VISIT_SCHEDULE.COHORT_NAME}&" "&{VWR_PPS_VISIT_SCHEDULE.VISIT_NAME}
As I mentioned the formula works perfectly in Crystal XI but not Crystal 2008 which no sese at all. We are preparing to migrate from Crystal XI to Crystal 2008 and if this is an issue we may need to but upgrading off.
Any help with this would be gratly appreciated.
Thanks
Edited by: jackie2009 on Oct 9, 2009 3:41 PM

Try adding brackets around the If statements.e.g.
If {VWR_PPS_VISIT_SCHEDULE.COHORT_NAME} = '(No Cohort)' THEN
If DistinctCount({VWR_PPS_VISIT_SCHEDULE.COHORT_NAME},{VWR_PPS_VISIT_SCHEDULE.PROPOSAL_VERSION_ID}) >1
then {VWR_PPS_VISIT_SCHEDULE.COHORT_NAME}&" "&{VWR_PPS_VISIT_SCHEDULE.VISIT_NAME}
else ""&" "&{VWR_PPS_VISIT_SCHEDULE.VISIT_NAME}
else {VWR_PPS_VISIT_SCHEDULE.COHORT_NAME}&" "&{VWR_PPS_VISIT_SCHEDULE.VISIT_NAME}

Updated iphone4 to ios5 - get Device not supported for icloud - worked fine for other iphone4

Updated iphone4 to ios5 - get "Device Not Supported" message - worked fine for other iphone4 & ipad. Why is this iphone "not qualified for icloud"?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Try a reset. Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons. This should not affect any content on the iPad, it is similar to rebooting your computer.

Burned dvd gets error "not supported"

Similar Messages

Maybe you are looking for