Burned DVD in Toast 9 will not play in DVD Player
I used Toast 9 to burn a DVD from a Video_TS folder. The DVD plays fine on my Mac, but will not work on any other DVD Player. The Video is in PAL format and I am using a DL DVD - any suggestions??
Since I don't know what region you are in, it's hard to answer but if you are in the USA then you can't play PAL on most set top DVD Players. You have to have NTSC standard.
Similar Messages
-
DVD-R discs will not play on DVD Player
The DVD-R discs I made will not play on DVD Player Version 4.0.
I transferred VHS to DVD-R using an RCA VHS/DVD Recorder. The discs played well in 3 different DVD players but will not play on my i-book.
Please help?
New At This
i-book G4 Mac OS X (10.3.9)In a nutshell the problem is the fact that the Software used by the RCA recorder is for PC.
When recording DVD's the software that is available varys greatly.
Some of the top of the line software gives options to burn PC only, MAC only, and PC or MAC combined.
It was also brought to your attention to use VLC Player on your Mac the firmware that is used with this player will sometimes allow for playing DVD's that were burned on these VHS to DVD Burners.
Here are a few tips that affect reading and writing DVD. This link is only a small amount of what can and does affect, I suggest you do a Google search to learn all you can.
http://docs.info.apple.com/article.html?artnum=25402
Cheers Don -
I transferred photos from my camera to burn folder on my macbook Pro. Made a DVD from the burn folder but it will not play on my DVD player. What am I doing wrong?
How did you do this burn? Did you use a program like iDVD? A DVD player requires that the data on the DVD is recorded in the proper format: MPEG-2. A program like iDVD will do this. There are other programs available that can do the proper coding (Roxio 'Toast' for example), but iDVD has the most features and is easy to use. It is no longer available from Apple, but if you search on Amazon, you can find 'iLife 11', a suite of programs including iDVD. It will function properly on Apple's current operating system, but it cannot make a High-Definition (Blue-Ray) presentation. It is Standard Definition only, as are all regular DVD's. One good way to present photos on a TV is to make a slidesow in iPhoto, then export that slideshow to iDVD, where it will be properly formatted for a DVD player. Or, iDVD can make its own slideshow of up to 99 photos. HTH.
Frank -
iMac will not play the DVD that I have made on imovie and burned on iMac SuperDrive ?? (DVD plays fine on household DVD player and also plays fine on Toshiba laptop ) Why not on the iMac - anyone know???
There are many reasons this could be the case but whether an optical disc can be read or not is a function of:
The reflective media layer of the disc
Whether the burned disc was a DVD-R, DVD+R, DVD-RW, DVD+RW
The brand, model, and production lot of the disc
The specific frequency of the Write lasers that burned the disc
The specific frequency of the Read lasers that are attempting to read the disc
Are the Read lasers in the drive working (it is common for one set of lasers in a drive to fail while others continue to work)
How old are the Write and Read drives (laser frequencies change with age)
Is there dust on the read laser
Is there dust on the read lens
etc.
At one time it was estimated that fewer than 80% of all burned discs were readable in 90% of the drives. That has, I believe improved over time but at the same time it seems the faillure rate of lasers in the drives has increased but that may simply be the result of how many different read and write lasers there are in today's superdrives. Fortunately todays drives are a lot less expensive the replace -- now that Apple no longer installs optical drives in their computers. -
Burned a dvd but, it will not play on my dvd player for tv
I created a slideshow with itunes music added in iphoto. I tried the recommended free "burn for mac" software download. It burned a dvd but, this will not play on my dvd player for tv. What software title can i purchase that will burn my iphoto slideshow to a dvd that will play on typical home dvd player for tv AND on a windows pc?
some dvd players are very picky on what they will play some only
play dvd+r some only dvd-r some can't play dvd+rw and or dvd-rw
dvd burnable is a pretty fragmented std. -
DVD Drive will not recognize any movie DVD disk in the drive - thus will not play any dvd movies.
HP G71 449WV dvd drive will not recognize any dvd disc that has a movie on it. Will not play movies, keeps saying to insert disc when there is a disc in there. It will recognize a dvd data disc or a blank dvd, it just will not recognize any dvd movies. I've tried the microsoft fix it, downloaded new codecs, using different dvd playback software but none of that works since the drive will not recognize there is even a dvd movie in the drive. Computer is out of warranty.
Hello crollinsphoto1, welcome to the HP Forums.
It appears that you're not able to play movie DVD's in the DVD player in your notebook. I will try to assist you with this.
I'd recommend starting with this document:
Resolving DVD and Blu-ray Movie Problems (Windows 7).
Also, are these purchased DVD's or burnt DVD's?
Do the movies play in other sources? (DVD player, other PC)
Let me know how this goes.
Thanks.
I worked on behalf of HP. -
I live in the UK but visit the US regularly. I plan to buy a MacBookPro in the US but have read that it will not play UK DVD's. Is this so? If so, is it possible to change the codes?
All modern & new Macs can play both PAL and NTSC DVDs. I do it all the time and it works perfectly.
The DVD drive is set to its first region code when you first play a DVD in it. So when you buy a Mac, whatever type of DVD you play first will determine the initial region code that is set. If it's a PAL/Region 2 DVD it will set the DVD drive to region 2.
The only thing you have to watch out for is if you have a collection of DVDs that have different region codes. In those cases you may be faced with changing the region code in the DVD drive in order to play one or more of the DVDs; and as others have noted there is a limit to the number of times you can change the region code (most modern DVD drives allow up to 5 changes; the 5th change becomes the permanent change). This is due to industry licensing practices.
If you have DVDs that are Region 0 or All Regions you don't have to worry about region codes. -
I recorded VCR tape onto DVD-R but will not play on my MacBook Pro. I have already recorded multiple DVDs. How can I get it to play on my Mac?
"I recorded VCR tape onto DVD-R"
How? Using what equipment/software?
"The DVD plays on the device on which it was recorded."
Just a guess: You're using a VCR-DVD combo recorder. DVDs produced in this way will play on the device that made them, but won't play on anything else until they're "finalized." In fact, Macs will recognize unfinalized DVDs as blank discs until the discs are finalized. Check the manual that came with the recording device for instructions. -
I made a movie on IMovie and went to burn it to a DVD ...I could not do this so I contacted Apple..they had me download an App and then I could make a DVD...but it will not play on my DVD player...does anyone know how I can solve this problem.. I purchased this to make DVD's and now I can not do that!!
This is a known issue. It really comes down to two key factors - what type of DVD are you burning to + what type of DVD player you have.
This article will help. It's lengthy and can be technical in some parts but should shed some light on your problem.
http://www.media.utah.edu/dvdworkshop/pdf/DVDCompatTest.pdf -
Disc burned with iDVD will not play in DVD player only on MAC
I used iMovie to create a movie and then shared it with iDVD. I successfully burned the DVD through iDVD but it will not play on my DVD player. It plays fine on the iMac. It is in UDF format. After reading through posts, I saved the file as a disk image and then burned through Disk Utility. This plays fine but I would really rather burn the disc directly from iDVD. Any ideas why the DVD player says "This type of disc cannot be played"?
Media quality affects the burn errors on a disc. Computer players tend to have better error correction (to preserve digital data) - set-top DVD players tend to have poorer error correction since the are designed to play commercial, stamped DVDs with low error rates.
-
DVD will not play in dvd player
Hi,
I created a dvd in dvdpro and put into my dvd player and it says it can not play my dvd. Is there some sort of setting that I missed?You misunderstand. You most likely created and burned an HD DVD in DVD Studio Pro.
iMovie will only build and burn standard DVDs so of course it will work.
Drew put up a link to another thread where this is discussed is excruciating detail. Read through it and you should be on you way to addressing your problem.
x -
DVD will not play in standard player?
Rookie to DVDSP. Created project in FCP, exported using Quicktime movie, brought into DVDSP and created dvd, first as HD DVD and read that a standard dvd player will not play so I created new project using all standard settings and still nothing. Dvd player says cannot read disc. I have watched entire tutorial on Lynda, read manual, and researched topics concerning this but am still stumped. Probably something simple but I'm really over my head and have wasted a pile of dvds. Any help would be appreciated.
First of all thanks again, watched Lynda tutorial on compressor and was able to compress. Ok, used setting for creating dvd in compressor. When compressor was finished it asked me to insert media to burn to disk. I did. The resulting dvd plays on my dvd player but looks horrible. Way too bright and nothing close to my project in FCP. From some of the tutorials and discussions I've read I'm assuming it is because my color levels are not correct?
Message was edited by: John Applewhite -
IDVD burns disc but they will not play back on same computer
Prior to this latest update of iDVD, I had ZERO problems with burned iDVDs. Now I can create and burn a disc in iDVD 6.0.3 but my computer refuses to recognize it as a playable disc. I put it in the drive and it spins and spins and after around 10 mins a screen pops up and says that it is a blank. But when I play it on a standard DVD player, it works fine. I recently updated Quicktime to the latest version. Something is wrong. Ah, for the days when you could call Apple about anything and they had the highest rated tech support in the world, now it can be really tough to get an answer. Can anyone give me some thoughts? Thanks, Reed
I have the same problem. iDVD disks that I burn on my G5 will play on G4's, my PC, and all consumer DVD players that I have tried them in. But they will not play on my G5 that created them, and they never have. The disk just spins for a few seconds and then ejects. It never gets recognized and never mounts. There is no error message. I regularly distribute my DVD's to 20+ people, and the disks play on all of their players, though I don't know if anyone tried to play one of my DVD's in a G5.
I use DVD-R disks, and have tried burning at slower speeds (4x)from a disk image using Disk Utility, but the disk still won't play on my G5. On the other hand, my G5 will play iDVD disks that I have burned on a G4, and it will play commercial DVD disks.
I have seen posts from other users who have complained about this problem. I have never seen a fix or a suggested solution that worked. It would be great if you have seen something on this, or have some suggestions, that might lead to a resolution. Otherwise, I can live with it. -
IDVD will not play in DVD player :( help appreciated!!!
hi, I have been trying to get this gift, a slideshow to a very dear friend and have spend DAYS trying to figure this out. I have burned a slideshow to a DVD-R using the iDVD application. And the DVD will not play in ANYTHING but a playstation 3 unit. I even tried creating an image of the slideshow and saving it to the desk top and burning it to a dvd using disk utilities and still not working I am SO disheartened help appreciated. If I put it in a dvd player or a computer it plays pieces of it like choppy and or skipping. In the playstation it plays fine. But she does not have a playstation. THANKS
Hi
Most often - Cheap DVD brand -
I only use
• Verbatim
• DVD-R (no +R or +/-RW) (SL)
• burn speed set down to x1 or x4 recommended by many
• minimum of 25Gb free space on internal boot hard disk (others do not count)
Yours Bengt W -
Dvd's and Cd's will not play when entered into the player. It sounds like it is being read then it ejects it.
Well they can and do fail so you may need to have to take it in for a professional diagnoses. If you have an Apple Store in your area book an appointment with a Genius and they will look at it for free. Otherwise you can take it to an AASP, if you don't know where there is an AASP in your area please click the AASP Locator link.
-
I am having problems with my DVD tray. It is not moving in and out like it used to and now making LOTS of noises and won't play DVD after it closes. Please help
That is correct.....It is not mine it is my daughter's . When she tried to put the DVD in it will not go in easily and then once it is in the computer it will not play.
Sorry for the confusion
Maybe you are looking for
-
Logged in as admin, but don't have priviledges..?
I am trying to register some newly purchased software, but even though I am logged in with an account with admin priviledges, I get the msg that I am not. I have 2 accounts on this computer: my regular one and an additional blank one - both with admi
-
My airport problem has returned big time --Need some Help!!
Aloha once again: I though that this was fixed by simply changing channels on my airport router, but that fix only lasted for a few days, but now it's back and even worse. Let me give you some background on this problem. Here's my original message co
-
Can't personalise home screen on 9900
I was trying to shift round/hide some icons on my home screen (like I could do yesterday) but for some reason I don't get the option to move/hide icons any more. As it is a new phone obviously I've been experimenting - is there any settings or someth
-
Cannot open my PPRO CC project anymore
Hello everybody, Premiere Pro CC crashed during my work on a big project (french TV show). When I tried to reopen my project, Premiere start normally, begin opening the project (orange bar loading) and when the orange bar is approximatively arround 2
-
Budget Approval Workflow Error: FMBCS_WF_ROLE_BUDGET parameter: FMBCS
Hi All, I am implementing BCS Standard workflow templates WS12300025/6 on ECC 6.0. When I test the workflow, i get the following error: "Function module call up error: FMBCS_WF_ROLE_BUDGET parameter: FMBCS" What could be the cause of this? Please as