Burned DVD plays in Mac computer, but not in other players??
I burned a DVD using iDVD and the disk played in my computer. I then tried to play it in my PC and also on my home DVD players and it didn't work. I burned another DVD and the same result happened: worked in Mac, but no where else. I originally used a miniDV disk and then modified it before sending it to iDVD for burning.
Why doesn't it play elsewhere?
How can I burn a DVD that will play in others players?
Thanks in advance,
Brad
Well, you need to check whether your DVD can play a "minus" DVD. Older ones can't. And Mac can only burn "minus" DVDs.
After I started making DVDs, we had to go buy a new player -- that was a year ago, and now we have to buy another new one because that one has a problem with sound, sigh.
this is a very expensive hobby! But I love it! Good luck.
susan
Similar Messages
-
Burned DVD plays OK on computer but not on DVD player through TV
Did all steps through iMovie to make a DVD. No apparent problems surfaced during the process. The DVDs play fine on the computer but not on DVD player through the television. Suggestions were that I was using the wrong media, that the best was DVD-R. Same problem regardless of which was used: it may play well into the DVD and have problems when selecting a chapter, a slideshow or it can happen between chapters. There's no pattern to when it will malfunction or how it will appear. It manifests itself by slowing, going to jerky play or stopping completely; these problems may or may not be the same on DVDs that are made back to back but there is always a problem of some sort. I redid the DVD without a slideshow but the problem persists. I really don't want to do it without chapters but haven't tried doing it that way.
Any and all help will be greatly appreciated!
Jim
iMacG5 Mac OS X (10.4.3)
iMacG5 Mac OS X (10.4)James-
I suggest you try the disc on as many players as you
can get your hands on.
While it is good to have a player to test the final
disc on, you can't be sure that you're not facing the
quirks of just ONE player.
Of course this is no help if you only own ONE player.
The one that is your home DVD player. Many people on
these boards will reccomend the least expensive
player to use for testing. Often newer, less
expensive DVD players are more reliable than ones
that cost three times as much.
Have you had any success making DVDs in the past?
Very limited DVD making in the past but no problems such as this.
I really appreciate the responses so far and will look at all options. The DVD is quite full (an earlier response made note that this could be a problem) Since this is a church program that will be used on a vaiety of players, a disclaimer may be included explaining the possible problems.
Interesting that a lesser expensive unit could be more reliable... -
Songs playing on one computer, but not on others.
I use my iPod on three different computers (Home/Work/brand new laptop). I recently upgraded my iPod from original 80gb to new Classic 160gb. Before I purchased my new iPod, I transferred my whole library (about 50gb)from my iPod onto my new laptop(using transfer software). Then when I purchased my new iPod I synced the whole library to the iPod. The problem is that when ever I connect my iPod to my work or home PC some songs have an exclamation mark next to them (and they don't play). So when I went to replace the "exclamation marked" songs from the laptop (where the whole library exist), I had NO exclamation marks. So my question is why do the songs play on one computer but not the others? Please help!
It looks alot like the problem we had when we couldn't resolve the CUPS server FQDN. But the desktop and laptop are on the same subnet and use the same DNS servers. I can ping the CUPS server by FQDN from the command prompt on both
2010-02-11 14:57:46,319 [0x000016f4] INFO LCWabiAccount - (WABIMSG_ACCTINFO) acct SLOT 0 - CUPS (@) (0x0186a368), instance=54, proxy=BC-IPT-UPS.:5060(TCP), reg=false, pres=true, SL=false, KPML=false, CiscoKeepAlive=false
2010-02-11 14:57:46,319 [0x00001394] WARN LCIsuaLog - (WABIMSG_SDKMSG) CSuaCallControlManager.Singleton.Asynchronous::CProxyRegistrationHelper::RegisterWithNextProxy[2852] - Order of routing attempt: :5060(TCP)>. Attempting to register to
2010-02-11 14:57:46,319 [0x000016f4] INFO LCWabiSinks - (WABIMSG_REGSTATE6) ********* CUPS (@) (slot 0) REGISTER STATE: Registering... *********
2010-02-11 14:57:49,787 [0x000016f4] INFO LCWabiAccount - (WABIMSG_ACCTINFO) acct SLOT 0 - CUPS (@) (0x0186a368), instance=54, proxy=BC-IPT-UPS.:5060(TCP), reg=false, pres=true, SL=false, KPML=false, CiscoKeepAlive=false
2010-02-11 14:57:49,787 [0x000016f4] ERROR LCWabiSinks - (WABIMSG_REGSTATE11) ********* CUPS (@) (slot 0) REGISTER STATE: FAILED!! code=503, reason=Service Unavailable *********
2010-02-11 14:57:49,787 [0x00001394] ERROR LCIsuaLog - (WABIMSG_SDKMSG) CSuaCallControlManager.Singleton.Asynchronous::CProxyRegistrationHelper::onFailure[3561] - Failed to register! error-code: 503, msg: 'Service Unavailable'. Retry in 20 second(s).
I swapped out the username for and the domain with to protect the innocent. Or maybe the guilty; we will see. From the command prompt I can ping BC-IPT-UPS. and I get a response from the CUPS at the correct IP address. -
want to change .img to .mox or .avi but won't convert. It is a movie from Finalcut pro 10.1.3 as a home video. I am on IMAC 10.1.1 yosemity. I have tried 3 different video convcerters. It plays on my computer but not recognized by blue ray player on TV. - Roger
Julie O wrote:
I just purchased the MPEG2 component but it can't be installed on Yosemite using the installer. Do you have to manually drop it into a certain area folder?
Have you followed the instructions on the Square5 website>MPEG Streamclip for Mac>Lion/Mountain Lion and MPEG2 Playback Component?
Russ -
Why is home sharing showing up on one computer but not the other?
My homesharing is showing up on one computer but not the other! They are both under the same account and both iTunes are up to date. Unfortunatally, of course its showing up on the computer that I dont need it on. Please help me! Thanks!
It could be a firewall issue. Try disabling the firewall and see if that helps.
-
"printer is offline" appears on one computer but not the other (both windows 7)
printer is offline" appears on one computer but not the other (both windows 7)
This is pretty common to see when your firewall kicks in and blocks certain communication paths the printer takes.
Here's a list of ports and programs that when allowed through the firewall, will restore communiction.
Ports to open:
UDP ports: 427, 161, 139
TCP ports: 9200, 9220, 9290, 9500
Programs to allow:
hpiscnapp.exe
hpoews01.exe
hpofxm08.exe
hposfx08.exe
hposid01.exe
hpqkygrp.exe
hpqste08.exe
hpqtra08.exe
hpznui01.exe
hpzwiz01.exe
SLP_Service (also known as UDP 427)
Have your security software provider walk you through allowing these items through your firewall.
If this does not fix your issue, it is most likely an issue with the driver configuration. Your router may have assisgned the printer a new IP address and this can be changed in the properties of the existing driver. -
Burned dvd plays on Mac but not on player
my burned dvd plays on my Mac with no problems but on my dvd player, it just stops after 3 few seconds. any ideas what happened there?
i used iDvd 4Welcome to the Forum.
The most likely reason for consumer DVD players to skip or stop on DVDs that play well in computer DVD drives, are excessive burn errors that the consumer players 'choke on'. All burned media (CD and DVD) has burn errors. Burning at lower speeds tends to reduce the error level, hence the recommendation to burn low-speed media for maximum player compatability. Computer DVD drives have a high level of error correction (after all - you wouldn't want to loose any data on a data DVD) and can handle the errors. Consumer DVD players don't - after all they are designed to playback pressed DVDs with low error rates.
Some consumer DVD players are more sensitive to these errors than others.
Sometimes using a different brand of media will help. -
ICal Subscription Works On One Computer But Not The Other
I subscribed to a web based iCal subscription. The subscription refreshes on my Mac Mini but not on my desktop, which is connected to my iPhone. The iPhone therefore doesn't get the subscription contents either. I've tried deleting and resubscribing but nothing works.
Hey Valenz0711,
That definitely sounds frustrating. There are a few different reasons it may not be working on the iMac (iTunes is not up-to-date, Firewall Settings). The following article may provide more information on a resolution:
Troubleshooting Home Sharing
http://support.apple.com/kb/TS2972
Thanks,
Matt M. -
Why will DVD play on one player but not another??
Hi,
I made an ISO file using devede and then burnt it to a DVD using K3B. The finished DVD will work on a Magnavox player but not a JVC. Is there anything I can do about this??? Do some players have a "must be produced commercially" filter or something???
Jim
Last edited by MillTek (2008-04-20 20:45:12)First, I am assuming you recorded your iso on +R type media. Next, I'm guessing that the player that won't play your DVD is the older of the two players. Some DVD players, especially older ones don't like +R media. If this is the case, here is a possible fix.
Here is a thread on another forum which discuses changing the booktype on your DVD burner. Here is a quote from the original post:
There have been many questions asked about how to booktype +R media to DVD-ROM
Many standalone Players, HDD recorders/players and games consoles don't like +R media but they are happy enough to play -R or DVD-ROM.
Some drive brands have tools to change this option but others don't. I have found that the easiest way to change your BOOKTYPE setting is to use a small burning tool called IMGBurn which can be found doing a Google search.
Below you can see some screen shots which guide you through changing your BOOKTYPE setting. For this I have used my NEC4551 but IMGBurn supports NU-Tech, Plextor, Ricoh, Samsung, BenQ, LG, Lite-on and NEC.
Once you have changed your BOOKTYPE setting, when you burn a +R/+RW disc it will be burned as a DVD-ROM which is the same as a bought movie and most players are happy to play these.
Since my DVD players are happy with +R media, I haven't tried this. Both of my players are fairly new, and I made sure that +R was listed on the box as one of the formats accepted by that player.
As usual, try this at your own risk.
Pudge -
HLS plays on Mac Safari but not Windows Safari nor iPad
Hi,
I have the following code that plays on Mac Safari:
<!DOCTYPE html>
<html lang="en">
<head>
<meta charset="utf-8" />
<title>Test HLS</title>
</head>
<body>
<video controls width="480" height="270">
<!-- <source src="http://walterebert.com/playground/video/hls/sintel-trailer.m3u8"> -->
<source src="http://d1ckv7o9k6o3x9.cloudfront.net/d54cfa01-eff2-4e86-946e-dc8b2ee4a7e8/media/ hls/MVI_5927.m3u8">
</video>
</body>
</html>
The url can be cut/pasted into the browser and works also but neither this code nor the url works in Windows Safari or iPad
http://d1ckv7o9k6o3x9.cloudfront.net/d54cfa01-eff2-4e86-946e-dc8b2ee4a7e8/media/ hls/MVI_5927.m3u8
Versions of software:
Mac Safari: Version 7.0.3 (9537.75.14) (works)
Windows Safari: Version 5.1.7 (7534.7.2) (doesn't work - blank screen)
iPad Safari: ios Version 7.1.1 (doesn't work - cannot decode)
I'm creating the hls using ffmpeg lpgl with this command:
$cmd = $this->ffmpegcmd .
" -re -y -i ".$transcoded_mp4_file.
" -map 0 ".
" -f segment ".
" -segment_list ".$transcoded_file.
" -segment_list_flags +live ".
" -segment_time 1 ".
" -segment_list_type m3u8 ".$transcoded_hls_ts_file."%05d.ts".
' 2>&1';
Any help is much appreciated.
Regards,
jt_dylanDo I have to embed the mp4's in an HTML5 wrapper just to play them from my disk?
Yes. -
Ipod works on one computer but not the other?
Can someone please help me? My ipod works on my laptop but not the desktop. When I plug the Ipod into the desktop it sometimes shows up in Itunes but says it's corrupt. Which it obviously isn't because it works fine on it's own when not plugged into a computer and it works fine when I plug it into the laptop. Also when I looked in my computer the Ipod would show up as drive j and it would flash on and off. Well, I tried plugging the Ipod into a different port and that worked as far as drive j stopped flashing on and off. I tried changing the drive name and it wouldn't let me because it always went back to drive j even after I changed it to drive z. Itunes is playing music and is up to date. I have Windows Vista Home Premium 64 bit. Please help.
Well start with these articles and see if that gets you anywhere...
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
http://docs.info.apple.com/article.html?artnum=305136
iTunes for Windows: iTunes 7 doesn't recognize iPod
http://docs.info.apple.com/article.html?artnum=304434
iPod missing in "My Computer" or in iTunes for Windows
http://docs.info.apple.com/article.html?artnum=61711
Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
Putting iPod into Disk Mode
http://docs.info.apple.com/article.html?artnum=93651
Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
http://support.apple.com/kb/TS1493
Patrick -
HT204187 outgoing mail rejects password on one computer but not the other
The mail program says the outgoing mail password is incorrect on wife's desktop computer, but mail works from her iPad.
I, too, have the same problems as listed above. I have changed my password in my mail account several times. Each time my iPhone and iPad accept the new password and is able to send/receive mail. My macbookPro rejects it each time. I have tried deleting it from keychain...still did not fix the problem. Any other suggestions?
-
Home sharing shows up on one computer but not the other. Help
I am trying to use home sharing it shows up on my older computer but no home sharing on my new computer. Using the same apple id for both. I need help.
It could be a firewall issue. Try disabling the firewall and see if that helps.
-
TS2972 Homesharing shows up on one computer but not the other one.
Homeshare shows up on my desktop but not my laptop. I can acces the laptop library from the desktop fine but the desktop does not even show up on the laptop. Both iTunes versions are the most current. I have tried turning Homeshare off and back on and closing and reopening iTunes. No luck. I have checked firewall settings. Desktop has windows vista and laptop windows 7. Any suggestions?
EDIT:
After turning homesharing on and off, closing and reopening iTunes, and waiting, it finally connected. Oddly there are two libraries showing up. Anyway, problem solved for me! If only I could delete this question now, haha. -
My mom & I share the same iTunes account and we finally have seperate computers. If i hide songs from iCloud on my computer will it also hide them on her's? If it does, is there anyway i can hide/delete some songs off my computer but keep them on her computer because I don't want her music on my compute but i don't want to repurchase everything i have....
Try restoring your iPod. Restoring will erase the iPod's hard drive, reload the software and put it back to default settings. it won't remove anything from your iTunes library. Once the restore is complete follow the on screen instructions to name the iPod and automatically sync your songs and videos onto the fresh installation. Press Done and the iPod will appear in iTunes and start to sync. If you want to update manually or using selected playlists uncheck the box beside the sync automatically instruction and press Done, it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes 7
Maybe you are looking for
-
How can I attach multiple photos to an e-mail
I would like to attach multiple photos which are already in the photos file on my ipad to e-mails I am sending from the ipad. Is there a place in the e-mail where you can attach photos. The only way I have found to do it is to send from inside the
-
Can someone help me with the error : " ORA-00942"
Hello there! I try to run this script and I get the error "table or view does not exists". I can`t figure out why :( Could someone please help me? First of all I have the table: drop table A_Vanzare create table A_Vanzare( IdVanzare NUMBER(3), IdProd
-
many times I drop a photo into a book page box and it resizes it. I want to scale it smaller but it only allows me to make it bigger. Why can't I slide to make it smaller?
-
Transparency issue within linear wipe effect
Hello, my client wishes some special linear wipe transitions for his new image movie. Due to the fact, that the transition should have a specified angle i used the "linear wipe" effect to make some presets. To get a smooth transition i tried to use t
-
I want to add some predicate in select clause. Alike we can add some predicate in where close using FGAC. Is it possible in oracle ? I want to retrieve some more columns in result. It doesn't matter if those columns are there in select clause or not