BURNED DVD PLAYS WITH SOUND ON PC BUT NO SOUND WHEN PLAYING ON TV ???

BURNED DVD PLAYS WITH SOUND ON PC BUT NO SOUND WHEN PLAYING ON TV - VIA VIDEO PLAYER ??

Hi,
It may be worth trying another burning application to see if this helps the issue.
Download and install the free utility, ImgBurn and use this to create the DVD. Guides on using this to burn to single layer and dual layer discs are below.
Burning DVD Files To Single Layer Discs
Burning DVD Files To Dual Layer Discs
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Burned dvd plays on Mac but not on player

my burned dvd plays on my Mac with no problems but on my dvd player, it just stops after 3 few seconds. any ideas what happened there?
i used iDvd 4

Welcome to the Forum.
The most likely reason for consumer DVD players to skip or stop on DVDs that play well in computer DVD drives, are excessive burn errors that the consumer players 'choke on'. All burned media (CD and DVD) has burn errors. Burning at lower speeds tends to reduce the error level, hence the recommendation to burn low-speed media for maximum player compatability. Computer DVD drives have a high level of error correction (after all - you wouldn't want to loose any data on a data DVD) and can handle the errors. Consumer DVD players don't - after all they are designed to playback pressed DVDs with low error rates.
Some consumer DVD players are more sensitive to these errors than others.
Sometimes using a different brand of media will help.

Burned DVD works fine in a mac but audio out of sync in a DVD player!?

The titles kinda says it all. Nearly. I've made my most complicated (for me) DVD to date. It's a concert DVD shot in anamorphic. I've edited in FCP and exported with compressor with all the appropriate settings, to mpeg 2. I've built the DVD in DVDSP with an intro from motion, motion menus etc. It previews fine and looks outstanding (if I do say so myself!). I burned the finished folder with Toast 8 ( as a UDF) and the burned DVD plays under DVD player on all my macs faultlessly. When I put the DVD in a normal DVD player, the audio is SERIOUSLY out of sync (the dancing is out of time let alone the lip sync) and the picture is stretched wide, like it's trying for 2.35.1 when it's only 16.9 or something.
Can anyone offer any suggestions? All help appreciated.
Gareth

I've edited in FCP and exported with compressor with all the appropriate settings, to mpeg 2.
Double check to make sure that you edited in Anamorphic and also encoded as 16:9 video not 4:3 - also make sure you set the Track to 16:9 Letterbox in DVD SP.
What encoding rates did you use for the video and audio? Sometimes if the rates are too high it can cause drifts.
On the audio side, did you export the FCP as self contained and make the audio AC3? Also you can try just exporting the audio as an AIF and encode that as an AC3.
How did you burn the DVD (Speed and Media used?) Sometimes bad burns/media can cause issues.
Also look at these threads
http://discussions.apple.com/thread.jspa?messageID=3131142&#3131142
http://discussions.apple.com/thread.jspa?messageID=1872235&#1872235
http://discussions.apple.com/thread.jspa?messageID=1363574&#1363574
http://discussions.apple.com/thread.jspa?messageID=1086775&#1086775

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
You are likely to get poor connections and dropping out.
If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
http://forumhelp.dyndns.info/networking/powerline3.jpg
I will monitor the subject line of this thread, should you want to post any more information.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Burned DVD plays in Mac computer, but not in other players??

I burned a DVD using iDVD and the disk played in my computer. I then tried to play it in my PC and also on my home DVD players and it didn't work. I burned another DVD and the same result happened: worked in Mac, but no where else. I originally used a miniDV disk and then modified it before sending it to iDVD for burning.
Why doesn't it play elsewhere?
How can I burn a DVD that will play in others players?
Thanks in advance,
Brad

Well, you need to check whether your DVD can play a "minus" DVD. Older ones can't. And Mac can only burn "minus" DVDs.
After I started making DVDs, we had to go buy a new player -- that was a year ago, and now we have to buy another new one because that one has a problem with sound, sigh.
this is a very expensive hobby! But I love it! Good luck.
susan

HT1103 How can I burn a slideshow (with sound) to a DVD. I have an imac desktop.

Does anyone know how to burn a slideshow to a dvd disc. It has pictures, video and music. LLaBant

To create a video DVD disk that can be played in set top DVD players and shown on a TV set you need a DVD video authoring application, like iDVD. If you do not have iDVD on your Mac you'll have to purchse it by bying a copy of the iLife 09 disk from a 3rd party retailer like Amazon.com.
Why iLife 09 and not 11:
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
1 - once you have iDVD installed export the slideshow out of iPhoto at Size = Medium or Large:
2 - 0pen iDVD, select your theme and drag the exported movie file into the menu window being careful to avoid any drop zones.
3 - follow this workflow to help ensure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Burned dvd plays with line at top saying "MARKER 1"

hi
i exported a final cut express hd project as a fce quicktime movie, with the selction of "all markers" to be exported as well (i assumed this would add the little chapter markers i put in fcehd). however, when i used dvd studio pro 2, the program didn't detect the markers, so i created them myself in dvd studio pro 2. then, when i burned the dvd and played it back on my computer, a white line at the top of the screen says "marker _" for each chapter. how can i get rid of these? are the from final cut's exported movie because i chose to add all markers, or are they from dvd studio pro when i added chapter markers? thanks in advance.

A simple work-around (your version of DVD-SP does not understand markers which were generated by a later version of FCE) is as follows:-
Open the Quicktime file of your playout in Quicktime. Turn off the "text track" and re-save (or save a new reference version). Use the new file to generate your .mpeg2. Replace the video track in DVD SP2 with this 'clean' one. Do put your chapter makers in by hand (or keep the ones you've already set).
Hope this makes sense. The important part is to turn off the "text-track" in Quicktime Pro. Make sure you can't see the white header on screen before you go any further!

Burned DVD plays OK on computer but not on DVD player through TV

Did all steps through iMovie to make a DVD. No apparent problems surfaced during the process. The DVDs play fine on the computer but not on DVD player through the television. Suggestions were that I was using the wrong media, that the best was DVD-R. Same problem regardless of which was used: it may play well into the DVD and have problems when selecting a chapter, a slideshow or it can happen between chapters. There's no pattern to when it will malfunction or how it will appear. It manifests itself by slowing, going to jerky play or stopping completely; these problems may or may not be the same on DVDs that are made back to back but there is always a problem of some sort. I redid the DVD without a slideshow but the problem persists. I really don't want to do it without chapters but haven't tried doing it that way.
Any and all help will be greatly appreciated!
Jim
iMacG5 Mac OS X (10.4.3)
iMacG5 Mac OS X (10.4)

James-
I suggest you try the disc on as many players as you
can get your hands on.
While it is good to have a player to test the final
disc on, you can't be sure that you're not facing the
quirks of just ONE player.
Of course this is no help if you only own ONE player.
The one that is your home DVD player. Many people on
these boards will reccomend the least expensive
player to use for testing. Often newer, less
expensive DVD players are more reliable than ones
that cost three times as much.
Have you had any success making DVDs in the past?
Very limited DVD making in the past but no problems such as this.
I really appreciate the responses so far and will look at all options. The DVD is quite full (an earlier response made note that this could be a problem) Since this is a church program that will be used on a vaiety of players, a disclaimer may be included explaining the possible problems.
Interesting that a lesser expensive unit could be more reliable...

Burned dvd and menus, audio, subtitles worked but no video

I with through the entire process of creating a iDVD project with an .AVI video that had subtitles. After it burned, it played on my dvd player with menus, sound and even the subtitles but there was no video. What went wrong? And how can I fix it? Does it have to do with the file being an .AVI file?
Help appreciated!

Thank you Studio X and David for responding. Yes, I will stay away from m4v formats.
Do you have a fix on how to solve the "Codec could not be opened"?
I am scheduling an appointment with the Apple Store but I am not sure if the Genius Bar guys are up on FCP and knowledgable to figure out what changed and how to change it back to be able to playback my capture scratch files. I noticed some of the past capture scratch files no longer work and get the flashing dark green screen but some do work. It's a software issue but what is it? Any ideas?

I can not burn dvds anylonger with my MacPro. Why ?

Hi everyone. I already posted this message in another thread but got no useful replies.
Configuration: MacPro Early 2008, MacOSX 10.6.8
I can not burn dvds anymore and do not know why. I can play dvds and cds though!
The following is the usual error message displaying after clicking the button burn :
I have run Disk Utility from the Install cd of Snow Leopard and the small things which needed repairs have been repaired.
I have reset the PRAM and the SMC (System Management Controller). Nothing.
I have set up a new user account with admin privileges but it did not work.
Please, note that I am trying to burn the same Kodak Pro dvds for photo and data archival that I burned in the past in the same MacPro.
I am actually burning my dvds using my MacBook Pro connected with my MacPro through Airport but it's a very slow process, of course.
Any piece of advice ?
Thank you !
Paolo

Hi everyone. I already posted this message in another thread but got no useful replies.
Configuration: MacPro Early 2008, MacOSX 10.6.8
I can not burn dvds anymore and do not know why. I can play dvds and cds though!
The following is the usual error message displaying after clicking the button burn :
I have run Disk Utility from the Install cd of Snow Leopard and the small things which needed repairs have been repaired.
I have reset the PRAM and the SMC (System Management Controller). Nothing.
I have set up a new user account with admin privileges but it did not work.
Please, note that I am trying to burn the same Kodak Pro dvds for photo and data archival that I burned in the past in the same MacPro.
I am actually burning my dvds using my MacBook Pro connected with my MacPro through Airport but it's a very slow process, of course.
Any piece of advice ?
Thank you !
Paolo

Serious Q...basic softW imac few mos old, does nero burned DVDs play?

This is driving my crazy....the imac seems to work just fine, but I'm wondering about the drive. I have basic software...no extra software included. A friend burned a 120minute/4.7gb DVD+R sony disk with close to 600 minutes of uncompressed video...about 24 videos at about 25minutes a piece and 175mg a piece...in avi format. When I open the disk it shows the avi files on top and mp3 music files on the bottom. Strangely, he said there was no need to compress them despite the time lenght. I don't know that much about them but he swears there is nothing wrong with the disks. He says he burned them with Nero.
I have tried everything. I am tired of downloading stuff. I've downloaded divX player and converter, divX Doctor II, 3ivx, windows media componants for QuickTime. I went to the Nero site to download more crap to tell me if Nero burned disks are playable in this drive but i have no CD to burn the image I am supposed to burn and all that blah blah blah.
Can anyone with some proffesional knowledge take a stab at what is going on?
I suggested he should have compressed the files because they are too long for the disk but he says no...I'm wrong. When I try to fix them so divX will play them, they say there is no video but he swears he checked them.
I have been trying to figure this out all day.
I just want a simple answer.

ok....but there are 24- 25minute videos...each one is 175mb, all on the same disk...plus it is showing 18 audio files that are mp3s totaling 396mb and with video files that puts it around 4,600mb. That's almost 600 minutes of time not including the 18 songs. Doesn't that matter on a 120 minute disk?
I don't need to edit them. I was just wanting to play them.
I tried using divX Doctor II to do whatever it takes to allow the divX player to play them but when I added one of the avi video files to the divX Doctor II to fix it, it said Error code 2048: No movie found.
At one point I tried to rip them but they were showing up as just a few kb. When I try playing they are a few second long and just a green screen, whereas the song files will play.
I'm not so sure that there is even video on here....just the file names and the songs. How can I find out for sure? As for asking him to put them in another format, I am not speaking to him because he was being rather rude...so it's not so much the importance of the videos....but I would just like to know if there is a way to know for sure what is on that disk. divX Doctor II says there is no movie on there. How reliable is that?
Thanks!

Burn DVD video with Win 7 burner

I have an finished Video - it is an mp4 . how can I burn this video with my Win 7 Windovs DVD Maker an finally have an DVD

Go back to your PPro project and export again... this time to MPEG2-DVD... creates the two files needed for Encore, video and audio
Here are some Tutorials
Right side of http://forums.adobe.com/community/premiere
http://www.youtube.com/playlist?list=PL507B3498B4479B96&feature=plcp
http://forums.adobe.com/thread/913334
http://forums.adobe.com/thread/845731
http://forums.adobe.com/message/3234794
A "crash course" http://forums.adobe.com/thread/761834
A Video Primer for Premiere http://forums.adobe.com/thread/498251
Premiere Tutorial http://forums.adobe.com/thread/424009
And http://forums.adobe.com/message/2738611
And http://blogs.adobe.com/kevinmonahan/2012/08/28/free-video-tutorial-samples-from-learning-p remiere-pro-cs6/
-and more from Kevin http://forums.adobe.com/message/4714153
http://blogs.adobe.com/premiereprotraining/2010/06/video_tutorials_didacticiels_t.html
And
http://blogs.adobe.com/premiereprotraining/2010/06/how_to_search_for_premiere_pro.html
And http://bellunevideo.com/tutlist.php
Premiere Pro Wiki http://premierepro.wikia.com/wiki/Main_Page
Tutorial http://www.tutorialized.com/tutorials/Premiere/1
Tutorial http://www.dvxuser.com/V6/forumdisplay.php?f=21
Tutorial HD to SD w/CS4 http://bellunevideo.com/tutorials/CS4_HD2SD/CS4_HD2SD.html
Exporting to DVD http://help.adobe.com/en_US/premierepro/cs/using/WS3E252E59-6BE5-4668-A12E-4ED0348C3FDBa.h tml
And http://help.adobe.com/en_US/premierepro/cs/using/WSCDE15B03-1236-483f-BBD4-263E77B445B9.ht ml
Color correction http://forums.adobe.com/thread/892861
After Effects Tutorials http://www.videocopilot.net/
Surround Sound http://forums.adobe.com/thread/517372
Photo Scaling for Video http://forums.adobe.com/thread/450798
-Too Large May = Crash http://forums.adobe.com/thread/879967
-And another crash report http://forums.adobe.com/thread/973935
CS6 http://www.dvxuser.com/V6/showthread.php?282290-New-Tutorial-Working-Faster-in-Premiere-Pr o-CS6
Video Scaling https://blogs.adobe.com/premiereprotraining/2010/10/scaling-in-premiere-pro-cs5.html
Encore http://tv.adobe.com/show/learn-encore-cs4/
Authoring http://www.videocopilot.net/tutorials/dvd_authoring/
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/
And more Encore http://library.creativecow.net/articles/devis_andrew/

Can't burn DVD's with Tiger

Since I installed Tiger, I can't burn DVD's using either Toast 6.1 or the native Apple burning software. I keep getting "Mismatch at byte...sector9. Verification failed." I am trying to back up a variety of files. I can burn CD's on my iBook G4, but I can't burn any DVD with any kind of content on my Pioneer. I tried PatchBurn with no success. Any suggestions? TIA. --- Dave

My guess is your Pioneer drive is connected via Firewire or USB 2. The OS 10.4 install or updates may have caused some problem with the Firewire or USB 2 communication with the drive. Oftentimes these problems are fixed by applying Apple's Combined System Updater. In your case that is the 10.4.4 combined update. It doesn't matter if you are already running 10.4.4.
Otherwise you may need to do an archive and reinstall of 10.4 to get the link working properly.

Problem Burning DVD-R with mac mini

Since I have my Mac mini (1.5 years) I haven't been able to burn a DVD-R once! Now I am almost out of space (7GB left) and need to backup. I am using Toast 6. It burns CDs fine. And it starts burning DVDs, but after 5 minutes it says "buffer underrun". Now I tried different settings, different DVD-R discs, burning it slow, and closing all applications. Nothing helps. I also tried getting rid of Toast 6 and just putting the DVD in, but then the computer doesn't recognize.
what else can I try? Wasting DVDs is becoming an expensive hobby
please help.

I also tried getting rid of Toast 6 and just putting the DVD in, but then the computer doesn't recognize.
What, exactly, does happen when you put a blank DVD in your SuperDrive? What option do you have selected in the CDs & DVDs System Preference to happen when you do put a blank DVD in? Perhaps you should set it to "Open Finder" so you can try to burn a DVD with the Finder. It may be set to "Ignore" or even to open Toast - which, of course, it can't do if you've removed Toast.
-Doug
P.S. Exactly which version of Mac OS X are you using? Your profile here says "Mac OS X 10.2.x" but all the Mac minis shipped with at least Mac OS X 10.3.x. You can find out if you select "About This Mac" under the blue Apple menu.

Problems with sound when I embed multiple videos on auto play into a composition widget.

I am having problems with the sound when I embed multiple videos on autoplay into a composition widget in Muse. It sounds as if they are all playing at once. Note that within the compostion widget, options - the auto play is disabeled.
I've a television set that has buttons below and I want the users to flick through the channels.
I need the oriantaion to be stacked as they're contained within a frame (the tv). I have tried the lightbox view (which at first seamed to solve the problem), but unfortunately the position, orientation moves when shown on different divises. It Had to be quite precise as I was ovelaying the original frame within the light box.
Could you please help me with this?
Also, I wanted to let you know that I think this software is amazing. Great job!
here is the link:
http://albanconnell.com/moving-image.html

Hi Alban,
I see what you are seeing. Could you send your file so I can investigate more? Send it to [email protected], with a link to this thread in the message body. If the file is >20mb, our email system cannot handle it so use a service like Adobe SendNow.
Thanks,
Sam

BURNED DVD PLAYS WITH SOUND ON PC BUT NO SOUND WHEN PLAYING ON TV ???

Similar Messages

Maybe you are looking for