Burned dvd won't play on my dvd player.

Help! I downloaded FREE DVD creator from the APP store. Followed directions on how to burn DVD. Imported video from iMovie ( vacation video ), burned it onto DVD and the playback on my DVD player is very jittery, stutters, and sometimes freezes. The video format was m4v. and the other format was .mov. Am I doing something wrong? Did I miss something? Very frustrating spending all that time editing the video only to have it not play on my DVD player. Do I need to get iDVD or a 3rd party app? Please help.

Hi
Best place to ask is in iDVD forum - but still -
There are lot's of factors determine the resulting DVD quality
Stutter and jittery etc use to be due to
• material is in different frames per second (PAL vs NTSC)
I start with finding out in what format the DVD is supposed to be
PAL (25fps) = EU
NTSC (29.97fps) = US
Most DVD-players in EU can handle both - Few in US can do so
• .m4v or .mov etc are no Video-Codecs but containers - Open the movie file in QuickTime-Player and then open Inspector [cmd+I] to find out Video format and frame-rate
I use JES_Deinterlacer to get all my material into same standard then Import it into iDVD (set to same standard).
By letting iMovie or iDVD do this conversion usually results in STUTTERING and JITTERY results. JES_Deinterlacer does this so much better - AND IT'S FREE !
• Using Cheap DVD brands as Memorex, NoNames etc - usually don't work at all (for VIDEO-DVDs - Data-DVD usually works but they do not play in any DVD-player)
I only use Verbatim
• DVD type used matters - DVD+/-RW usually doesn't work or gives a disastrous result. DVD+R plays on more modern DVD-players - BUT DVD-R plays on older ones too.
I use DVD-R
• BURN SPEED - Full speed usually results in DVDs that doesn't play or only on a few devices.
I always set this down to x2 or x4
So You see there are multiple reasons why this can go wrong.
Yours Bengt W

Similar Messages

Burned cd won't play on my cd player

I burned 3 playlists onto 3 CDs. All play on my computer disc drive. 2 of the 3 play on my separate CD player. The 3rd will not play. I've tried burning this playlist 3 more times, at different speeds, and the burned disc still will not play on my CD player. Very curious. Any ideas?

Hello mmac617,
Your initial troubleshooting usually goes a long way toward resolving burn issues. In instances such as this, the following article provides some additional information and troubleshooting steps that may be helpful.
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Cheers,
Allen

Burned CDs won't play on portable player

My friend who has a PC has been burning CDs for me of spoken-word MP3s. They play fine on my portable CD player. Recently she gave me a USB drive with a bunch of MP3s for me to burn myself on my new MacBook Pro. The CDs I burned won't play on the CD player (but they will play in iTunes on my computer). I don't understand what's going on...can anyone help out? Thanks.

Yes, if your interest is only in burning CDs and you don't want to keep the music in iTunes, the process is pretty cumbersome. You may want to buy a disc burning application like Toast, which can burn all sorts of formats without your needing to import anything into iTunes.

Burned disc won't play in CD Player

Help Please!
I burned a disc in iTunes.
The disc will play in the computer;
but it won't play in the CD player in
the car or the home stereo.
I suspect it is a file extension issue,
but I don't know how to check or change
anything.
Thanks in advance for your help!

Yes Audio CD should play just about anywhere so if it's not playing then it's not down to the setting you have chosen. It may just be your players, some can be fussy about what they will read, or it could even be the CD media itself. Have you been able to play CDs you've burned before or is this the first time you've had a problem? Have you another brand of blank CDs you can try?
Another thing you could try is reducing the burn speed and see if that helps, especially of you have it set at Maximum Possible. Open iTunes and go to Edit>Preferences>Burning and reduce the Preferred speed down. The packaging for your CD should have a maximum burn speed quoted somewhere, go lower than that. For instance if it's 24x try burning at 16x

Making a disc with iDVD on my Mac won't play on any other player why?

Making a disc with iDVD on my Mac won't play on any other player why?

How about some details on how you made the disc. What sort of media did the project contain? What brand and type of media did you use? What burn speed did you use?
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

I created a CD of one track from my library but it won't play on any CD player

I burned a CD of one track from my library and can see the track on the CD but it won't play on any CD player....help! My daughter needs this track to try out for her school talent show.

Did you burn the CD as an audio CD?
If not, that's your problem. Otherwise, without more details I can only guess. You might try a different brand of disk, or if you're using CD-RW try CD-R.
Regards.

.3g2 files won't play in any media player

Hello.
Ever since we updated to OS X Mavericks, any old .3g2 files won't play in any media player on our iMac. When we go to play them, they play button in QuickTime just flashes from pause to play and then back to pause and and nothing happens. I'm not sure if this file type is becoming outdated and therefore is not compatible with the new OS X, but I am just curious if anyone knows if there is a way to fix this.
Thanks.

Did you try VLC?

Music files won't play in windows media player.

My music files won't play in windows media player. all of them have .wpl as the file name extention. Could that be the reason they will not play? Help!

Hi
Please find the link given below please run the Microsoft fix it. Also second might help you as well to resolve your issue.
Information about the Multimedia file types that Windows Media Player supports
Troubleshoot
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

DVD SP burned disc won't play on DVD player

I recently compiled a FCP HD project into Standard Defintion 16:9 and imported it into DVD SP 4. I build, format and burned a DVD-R disc without any problems. However the disc won't play on any of the DVD players in my house (1 philips and 1 Pioneer). I checked all settings and can't find anything wrong! Remarkably, just before this I burned an older (SD 4:3) project on the same brand/type disc and that one worked flawless.
What am I missing, pleas help!
Evert

Double check to make sure you did not make an HD DVD (take a look to see what is on the disc, are the folders VIDEO_TS and AUDIO_TS or other name? It can happen where you think you made an SD but it is HD ) Also did you set a first play? Did you somehow make an NTSC (or PAL) and playing it on a machine that is not NTSC/PAL as applicable?
What brand media did you use? Some brands can be inconsistent...

IDVD burned discs won't play on any dvd player

When I burn a dvd using Idvd they will not play on standard dvd players.
Is this a problem with anyone else?
I noticed it was a problem in the early 2000-2003 but apparently something got fixed, because I couldn't find an incident where this problem continued to occur.
I am new to the Mac world and I don't always understand the acronymns used when I read responses. However, here is my problem.
Burning dvd's using Idvd:
1. the burn seems to run and function normally
2. when I insert the burned dvd into a dvd player one of the following things occur:
a) loading takes a very long time, then I get a message saying "wrong disc"
b) loading occurs fast, reads the file as a dvd, the dvd begins playing the music and showing the main menu screen, after accessing a menu option the dvd begins to play the slideshow with the music then after a minute or two, it freezes, and is no longer readable when attempting to reload it, the message is "wrong disc"
3. I've tried using dvd-r, dvd+r, dvd+r dual layer, and changing the burn speed to 8x, then to 4x and then to 2x. Nothing seems to matter.
4. I have noticed that in Idvd the dvd type is for an older version of dvd's such as single layer 4.2 gb and double layer 7.7 gb. I'm wondering whether the Idvd software on my MacMini is up to date, even though when I check for updates under the apple it comes back saying my system is up to date.
I'm using a MacMini running Mac OSX v 10.6.8 with processor 2.26ghz, Intel core 2 duo, memory 2gb 1067 mhz ddr3, and my dvd drive is a pioneer dvd-rw dvrts08, firmware q81f.
I really need help to fix the problem with the IDVD software or to know that I need to purchase another DVD maker software for my Mac. The product below says my Mac is running OS X v 10.7.2 but it isn't it is running v 10.6.8 as I stated.
URGENT!!!!

My macmini is under 2 years old. I reviewed your list of affects and I am going down the list to determine possible cause and effect.
I did try the PRAM process. The DVD still won't play on my DVD player but it did play on my son's Sony blue ray. I burned it at 2x burn rate after the PRAM process completed.
I can assume that's progress. The audio did however skip a couple of times while playing. That is new.
I will continue down the list using different type of blank dvd's etc.
Question: As I was reading through some other issues I'm learning that Mac/Apple is discontinuing IDVD, is that correct?
Are you aware of some other software to purchase that will create dvd's on the mac? If so, I may as well go that route rather than wasting more time using a defunct product. What is your opinion?

.mov burned but won't play in DVD player

No problem with previous 4 burns 6 months ago
iMovie 5.0.2- Toast Titanium 6.1
I have burned DVD in DVDVCPRO-NTSC and DVCPRO50 - NTSC and neither will play on my (old) DVD player.
Problems is this is to be shown for a wedding Sat., I leave in the a.m.
It will on play on my desktop
I do have husbands laptop - Windows whatever I will see if I can connect to TV
Any other format to try burn? Do I just need a new DVD player? I'll hope they have a newer one.
Thanks - I am running out of time.

Hi Patti,
welcome to this forum
there's no such thing as "DVDVCPRO"-video-dvd.... that is just an export option in iM for.... you're short in time, forget it...
in Toast 6.1.1. (you need the latest update), choose "video" and simply drag'n drop your whole iM project (NO export needded!) into it - boom, done...
post here progress of your project, the European dayshift is awake ;-))

DVD won't play in my DVR player

I've read the other posts on this already, but they don't seem to address what I believe is my issue.
I took an mp4 movie into iDVD as "One step DVD from movie", it took 8 hours to burn a 120 minute movie. When the screen said "done" it also said there was 21 minutes left to go. I clicked "close" and it popped an error that it wasn't finished, so I clicked on "continue", I left it go for another hour and the screen never changed from the done/21 minutes screen so this time I clicked "close" and "cancel".
The DVD plays on my MBP, though I'm not crazy about the quality. When I put it in my Panasonic DVR it won't play at all. I know it's not the media, as this is the same media I use in the DVR to burn movies with never a problem (Memorex DVD+Rdl).

Greetings,
I would not rule out the media. You can have a bad disk in a stack, they are just bits of plastic after all.
I would also suggest using DVD-R rather than +R for better compatibility with more DVD Players.
Open your iDVD project.
Go to Advanced > Delete Encoded Assets
Go to iDVD > Preferences > Advanced and lower the Preferred DVD Burning Speed to as low as you can stand. The lower the number the more likely the disk is to be recognized by various DVD Players.
Burn again.
Hope that helps.

Dvd won't play on Windows media player

I have used idvd 6 to burn a final cut express movie onto a dvd. However, when I try to play it on my pc, it will not work. It works on a dvd player, but not Windows media player. Is there any way to make this work?
Thanks!

HI there, I am too having this issue, I have never had this problem before. I always test the dvd in my windows p.c. to make sure it is viewable. I forgot to do it this time, and low and behold when I gave it to a few people, they were also not able to view it. 2 pc's in my office keep saying that it is missing an mpg2 plugin so can not play. The other pc, it just keeps playing the main menu, there is nothing for them to click to view it. Now mine at home will not play either, it has no menus on the screen, but it plays the menu music. Now my p.c. is up to date so there should not be any reason it will not play. I have burned at 1x, verbatim disc's etc.. It plays fine on my Mac, but even there I have just noticed that I used to be able to click with the mouse on each title to play. Now I have to scroll on the menu, then play from the dvd player control. Any help would be appreciated. They have been playing on a TV with the player though, thanks as always, Ileen

DVD won't play back in bluray player

I just created a DVD in DVD SP, about 5 mins long with audio. It plays back beautifully on the computer, but my sony bluray player doesn't recognize it at all. I haven't tried on a standard DVD player, but I don't see how that would help. A previously made DVD plays fine on the player. Any thoughts?
Thanks
Shelley

Dear Shawn,
Still no good. In a render last night, weirdly, even in my Mac the disk was unreadable and the warning said it was blank, but I rendered again and it works fine on the Mac. But on my SONY player, nothing.
I changed DVD SP to standard in the Preferences and re-created the project from scratch. I used the DVD: Best Quality 90 minutes setting with no changes. Here is the breakdown:
Name: MPEG-2 6.2Mbps 2-pass
Description: Fits up to 90 minutes of video with Dolby Digital audio at 192 Kbps or 60 minutes with AIFF audio on a DVD-5
File Extension: m2v
Estimated size: 2.79 GB/hour of source
Type: MPEG-2 video elementary stream
          Usage:SD DVD
Video Encoder
          Format: M2V
          Width and Height: Automatic
          Pixel aspect ratio: Default
          Crop: None
          Padding: None
          Frame rate: (100% of source)
          Frame Controls: Automatically selected: Off
          Start timecode from source
          Aspect ratio: Automatic
                    Selected 16:9
          Field dominance: Automatic
          Average bit rate: 6.2 (Mbps)
          2 Pass VBR enabled
                    Maximum bit rate: 7.7 (Mbps)
          High quality
          Best motion estimation
          Closed GOP Size: 1/2 second, Structure: IBBP
          DVD Studio Pro meta-data enabled
I am at my wits' end. I have two weeks to get this done for a memorial for my late father so you see my desperation.
Do you have any possibilities left? I'd go ahead and sign up for the Pro classes at the Apple Store, but in NYC I'm afraid I wouldn't even get to see anyone in time for FCP and its suite.
Thank you for any advice.
Shelley

Burned CD won't play in car player

I know similar questions to this have been asked, but I have not found a solution that works for me yet. I am burning a CD-R with iTunes, but it will not play in my car player. I have tried burning at different speeds. I have tried 3 different media types (Verbatim, Memorex, generic). None of them worked. I checked my iTunes settings to make sure I am burning an audio CD, and not an MP3 or data CD. I've probably burned 15 CDs to no avail.
I am burning them on a Sony drive. The CDs play fine in my computer. Just not in my car.
My car player is an older player (1996 factory Delco), but it has no problems playing normal CDs. I get an "E20" error message if that makes any difference.
Is it just a matter of trying more media types? Anybody have a media type that they got to work in an older Delco CD player? Any other suggestions? Thanks.

I solved my problem. I can't guarantee this will work for anybody else having this same issue, but it worked for me. Since my player is 10 years old, I thought maybe the problem was the newer size of CD-Rs. So I bought some of the older, smaller size CD-Rs (650 MB versus the newer 700 MB). Now I can't be sure that was the total reason it worked, but it now works with these new CD-Rs. They are also Verbatim brand, which I also tried unsuccesfully with the 700 MB size. These Verbatims are not only 650 MB, but also a light blue tint on the bottom, which may also have made a difference. I don't know. I couldn't find any of these older, smaller CD-Rs at any local store. I found them on Amazon and ordered them there. These are the ones I ordered if you are interested.
http://www.amazon.com/gp/product/B00006OX3P/102-3663220-6179311?%5Fencoding=UTF8 &v=glance&n=172282
Again, I can't guarantee these will work for you. There are probably many reasons why iTunes burned CDs won't work in some players.
Dell Inspiron 9300 Windows XP Pro Sony DVD+RW

Disk burned today won't play on tv; yesterday's does

I have created two very simple presentations in iMovie - title slides, a few images and an audio track. Both presentations are less than 3 minutes long. I burned one yesterday and it plays fine in dvd player. Burned the other today and won't play in dvd player (disk error or the player just ejects the disk). I am using Apple DVD-R 4X disks. I changed no settings between burning the two disks. Have never had trouble with disks not playing on dvd player (same dvd player each time) Any idea what went wrong?

You
b should
always create a disk image and burn that to DVD-R. I'm not saying this will solve this problem. Once you've encoded the project, nothing changes and you can burn additional DVD-Rs knowing that you're using an encoded file that did work, and should work in the future.
You could take the successful DVD and create a disk image from that and then burn another DVD-R to see if it will work.
http://docs.info.apple.com/article.html?artnum=42724
File/Save As Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Disk Utility to burn the DVD.
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (not the .img, the one below) in the left-hand window. Click the Burn icon. Your SuperDrive tray will open. Insert a recordable DVD. (DVD-R preferred by me.) Click the Close button. Wait. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and Tiger.
b Also, you can use DVD Player to play the virtual disk to check your iDVD 5 project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006

Burned dvd won't play on my dvd player.

Similar Messages

Maybe you are looking for