Burned FCE DVD movie jerks, stops

On several occasions, on various DVD players, my burned FCE DVD movies have either jerked, or quit in the middle of the presentation. Am I doing something wrong in exporting the FCE movie, or choosing the wrong iDVD commands in preparation to burn the DVD. I as well as my customers are getting frustrated. I've had other querks using the iDVD 6. Any advise would be much appreciated!

After I have completed the movie in FCE, I export it as "QuickTime movie". I then open iDVD, choose my theme, drag the movie into the theme, choosing the fade through black transition (because the DVD's are shown on an iMac for funeral visitations and need to be looped. If I don't choose a transition, the DVD will not loop, a glitch in the iDVD 6), then I click on "show the DVD map", click on the movie, choose advanced/loop. I then burn the DVD. The first time a movie jerked, stopped, I was convinced it was the DVD player. But since then, the same thing has happened on other DVD players, as well as on an iMac, on several occasions. Al, I appreciate any light you can shed on this. Thank you so much.

Similar Messages

[nForce] no audio on disk or image when burning a dvd movie

i've recently bought a K7N2 Delta I lsr and since i've had this i have never been able to burn a dvd movie no matter what i try. I've started from scratch trying with just the AC-97 audio drivers installed and downloaded the latest nforce audio drivers from nvida website, nomatter what i do i cant get a movie on disk correctly. When i build an image on my harddrive, i play it and theres no audio and when i build a dvd disk either the audio wont play or the entire disk wont play. my dvd player either says disk cannot be played or the disk is dirty. But when i import the image or disk into dvd shrink the film plays fine with audio. I'm at a total loss. i dont think that my processor has anything to do with it but i have an AMD Athlon 3200+ and 512meg 3200 Geil ram. If anybody has any ideas or better still a solution i would greatly appreciate a reply.. Thankx for your reply in advance...

Hello SON!
Recently bought, you say. Does that mean you have installed all mobo drivers, repair installed Windows, etc?
Have you tried the disks in another system?
Do you use the same software for playing and recording?
I don't think this is it, I think it is a software/driver problem, but two quick ones:
Untic in Device Manager for the optical device "Recognise insertion", as that can ruin a burn.
Remove the audio cable if you got one between the optical device and the sound card.

What is the best way to Burn a DVD Movie

What is the best way to Burn a DVD Movie, do I need a specific program?

pamelafrommelbourne wrote:
What is the best way to Burn a DVD Movie, do I need a specific program?
If you're trying to copy a commercial movie and burn it to disc, then it is expressly against the Terms of Use of this community to describe any method to illegally copy or circumvent copy protection DVD's
If you've made a movie and want to author a DVD, then you should use iDVD, Toast or, if you're really skilled, Final Cut Pro X.
If you just want to move a movie to a DVD, which probably won't play on a DVD player, then just insert a blank DVD, and move it over from the finder. Click burn.

How do I burn a dvd movie onto my MacBook?

How do I burn a dvd movie onto my MacBook?

If you are refering to a project from iMovie, you wuld do your editing, finalize it, push in a blank DVD-R, (set finder preferenes, General before hand to to show CD's, DVD's, Ipods on desktop. do a slow double click (about 1 secind between clicks on the "untitled DVD" and it should the allow you to type in a name.
Then click share in the menu bar and select the "export As: select the name
Where: select the DVD, click Export..
Here are some other ways:
http://support.apple.com/kb/PH10699
http://support.apple.com/kb/PH13824
Hope this helps

Problems burning a DVD Movie/Warning Message

#1...I had no problem at all downloading a movie from my camcorder, editing, making chapters,,but when I tried to burn a DVD, it showed a Warning Message: "There were warnings dring the project validation. It is recommended to fix these problems before burning."
Does Anyone Know how to Fix the problems? I am Clueless and no help with the help files. My system is about 6 years old, could be it's not fit to burn DVD's..
I am needing to learn to do these DVD's, I want to make more.
I have had to have a friend burn some for me.
Now, next question:
How do I network two computers together so I can transfer files, movies etc... My brother has a New iMac, Fancy New one with all kind of good stuff... I know he has iLife06..
I believe his has a DVD burner...
How fast does a DVD burner work on one DVD, if the Movie is about 85 minutes long.
What equipment or tools does one need to hook up two computers together?
thank you,
sue

hi newsue:
First, read this Apple Article regarding your error. You may not need to transfer anything:
http://docs.info.apple.com/article.html?artnum=303148
How do I network two computers together so I can transfer files, movies etc..
Read this Apple Article:
Mac OS: Moving files from your older Macintosh to a new one
http://docs.info.apple.com/article.html?artnum=25575
How fast does a DVD burner work on one DVD, if the Movie is about 85 minutes long.
Depends on the mac and the project really-there are numbers all over the board.
"old"Sue

TS4522 What is the problem when I get error code 0 when trying to burn a DVD. It stops around 60-some %.

I have tried twice to burn a DVD, and both times I get error code 0 at about 60-some % of the transcoding. I haven't had any trouble burning DVDs before now.

I had a friend with similar problem, not sure of cause. Happened when sharing to Apple device as well.
Apple said to delete all files in Render folder. We did not try that as-
Problem changed slightly for us, in that Share to 'Apple device 720' got to 50% and pretended to have completed its operation, but no file found in Project Share folder.
We found then, if the timeline clips where highlighted it would share, where previously it had repeatedly failed.
Hope that helps

Help Please: how can I burn a dvd movie without a theme?

I know this has been asked before. But none of the previous answers/suggestions seem to work. I've tried to use the "looping" method from the help menu, I still get a theme, now at the end of my video "package". And it doesn't "loop". I've tried to take a jpeg from photos and cover the theme using the option key, but that doesn't work either. I just want to have the option to be able to "turn off" the themes and create a clean video dvd for people who don't have time to choose on-screen buttons. Thanks in advance for any help you can provide

Hey maybe you can help me. I was trying to figure out how to burn an iPhoto slideshow on iDVD, but don't want to use the lame Apple themes. I went to the link you pointed out about one-step iDVD's, but the problem is you have to have a movie, and iPhoto won't let me export my slideshow while keeping the music in sync. Insane.
So two questions... do you know how to export a slideshow to .M4V or .MOV without losing the sync between all the pictures and the music? I've got 88 slides all set to specific timing and Ken Burns effect, but every time I do an export the music becomes disconnected from the pictures and goes out of sync.
I did do an export to iDVD and it seemed to stay in sync but I can't figure out how to get rid of the ridiculous theme that iDVD is automatically using. I don't want a theme at all.
When is someone at Apple going to figure out that most people just want a plain wrapper?
Anyway, do you know any answers to my problems? Thanks. I've lost 4 slideshows this week as iPhoto keeps losing all the slide settings.

Download and burn a dvd movie

I am trying to download a .mov video off a website and burn to disc. Can anyone help? Thanks.
Or.....I need to convert from an mp4 to .mov.
Thank you.

do you have the owners permission to down load it?
is it a down loadable file?

Using Handbrake to burn DVD movie to iTunes to sync to iTouch

What steps do you take to burn a DVD movie to iMac iTunes so you can sync it when iTouch is hooked to it?

Burning is creating a CD/DVD as when you burn the disc with the laser.
RIP is getting the stuff off a CD/DVD.
It is illegal to RIP DVDs to your computer (even if you purchased the DVD), therefore cannot be discussed in these forums.

Problem burning dl dvd´s.

Hello, i need to find the most up to date drivers for this burner device in my hp 17 1010nr BDDVDRW CA21N 1.03
i am having troubles using imgburn to burn double layers dvd´s verbatim.
i also have the blue screen in my pc, the error is this:
Spoiler (Highlight to read)
Problem signature:
Problem Event Name:                        BlueScreen
OS Version:                                          6.1.7601.2.1.0.768.3
Locale ID:                                             1033
Additional information about the problem:
BCCode:                                               116
BCP1:                                                    FFFFFA8008838010
BCP2:                                                    FFFFF880046343BC
BCP3:                                                    0000000000000000
BCP4:                                                    0000000000000002
OS Version:                                          6_1_7601
Service Pack:                                       1_0
Product:                                               768_1
Files that help describe the problem:
C:\Windows\Minidump\100712-17456-01.dmp
C:\Users\Guido\AppData\Local\Temp\WER-60465-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Problem signature: Problem Event Name:                        BlueScreen OS Version:                                          6.1.7601.2.1.0.768.3 Locale ID:                                             1033 Additional information about the problem: BCCode:                                               116 BCP1:                                                    FFFFFA8008838010 BCP2:                                                    FFFFF880046343BC BCP3:                                                    0000000000000000 BCP4:                                                    0000000000000002 OS Version:                                          6_1_7601 Service Pack:                                       1_0 Product:                                               768_1 Files that help describe the problem: C:\Windows\Minidump\100712-17456-01.dmp C:\Users\Guido\AppData\Local\Temp\WER-60465-0.sysdata.xml Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409 If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txt
So plaese i really need to solve this, i can not burn any dvd´s!

i really do not know, actually i never burn a dvd, not dl and single. I will try to burn a dvd movie using convertxtodvd or using infra recorder program, i that ok?

Need to re-burn a DVD, but some source files are missing. But Media Cache folder has them all.

hi all. I have PE3 and the issue is this: I needed a DVD of a project I'd completed a year ago, and I didn't have an old copy of the DVD. So I decided to re-burn it. But on opening the project, it seems some of the source files have been misplaced on my computer, so it says 'media offline'.
I figured I'd still be able to burn it though, because the Media Cache folder contained all the required files...
However it starts to burn the DVD and then stops at 49% saying transcoding error.
Q1: can you still burn a DVD if it says 'media offline' but you know all the source files are present in the Media Cache folder?
Q2: what's the transcoding error?
thx

The Media Cache folder contains files that are only of use to PE during internal editing and will NOT solve your lost video problem.
Once a Project is completed, that have no outside value.
The contents are CFA and PEK files, which is the Conformed Audio and Waveform Display, respectively (no video here to my knowledge).
And I'm not aware of any way to make them useful (outside of PE).
If you happen to have your Project and source video/audio files intact, and then delete the contents of the Media Cache folder, upon re-opening the Project, PE will regenerate the CFA and PEK files. Again this is only if you have the Project and all the source files (Assets)...

Help. trying to burn a dvd from fcpx. says bitrate too high

I'm using fcpx for a montage with effects like generators etc...not sure if this is why it says bitrate too high. I want to burn a dvd and it stops at 66% saying bitrate too high. I've seen an answer from 2011....wondering if anyone has anything new? My computer is Mac book pro 15 inch, latest software. I went to compressor but the final product doesn't allow me to put in a title and i'm worried about final quality. Thanks for any help

I would say usually it's about the same. If the settings are adjusted properly, it can sometimes improve the results; conversely, there's always the potential to get terrible results if the settings are wrong. (FCP X Share kind of takes that risk out of the process.)
Where the software can often add value is when you have long videos that you're trying to fit on a disk. Or trying to compress certain HD material with complex scenes. Or sometimes, you'll run into players that choke on a DVD and the adjustments in Compressor give you a chance to adjust the bit rate to a level that widens the disk's playability. And there are audio and video effects that can be added in Compressor without re-editing in FCP.
BTW, I don't believe you've yet told us how long your project is.
Russ

I am using iMovie 10 with Maverick but cannot share to burn to DVD...

I have spent hours creating a montage but find I cannot share to iDVD to burn to DVD. Does anyone have a suggestion?

How To Use Share With Maverick
In iMovie select the movie you wish to share from the library on the left.
Select “Share”
Select “File” (the name of the selected movie will appear)
Save to Desktop (this may take a while but you can check by double-clicking on that desktop icon which starts the movie playing in Quicktime. You can play the movie very quickly (say at 32 speed) to be sure it’s all there.
Leave iMovie open.
Insert a DVD
Open iDVD
Select the 3 small boxes icon next to the blue arrows in a circle.
When it opens, drag the movie icon from the desktop into the first box on the left (Not the “Cinema Chapters” box…and the movie title appears.
Insert a DVD disk and select the “Burn” icon-you will get a message that all’s not okay (There were warnings during the project validation. It is recommended that you fix these problems before burning the project) but ignore it and select “continue to burn”.
The movie burned just fine and I tested the DVD on our DVD player. However when I tried inserting titles down below in iMovie and Sharing to a File, when I went to test it by double-clicking on the desktop icon a got a message that it could not read the format (although in MP-4 just like the movie without titles. Tried this with Quicktime 7 and FlipMac-no luck. So when I dragged that icon into the first box on IDVD it also there could not recognize the format-I’ll keep working on this but at least I can now burn a DVD movie.

Burning/Playing DVD's

Im a new Mac user and Im trying to copy/burn a DVD (Movie)..
1) Do I need additional software on my iMac, or can I burn using Disc Utilities?
I tried to copy and burn using the below instructions, it said burned sucessfully, but the disc doesnt appear to have anything on it, and I cant play it..
Instructions
          1.          Make an Image of a DVD With Mac OS X
          ◦          1 Place the DVD you want to copy into your DVD drive.
          ◦          2 Go to and click on the hard drive and select "Applications." From there, launch the disk utility.
          ◦          3 Click on the name of your DVD that appears in the white pane on the left hand side in disk utility.
          ◦          4 Choose "New Image" in the disk utility toolbar. From there a dialog box will appear. Name the new image and choose a destination where you want to save to save it. The best idea is to save it to your desktop because it will make it easier to find when it's time to burn the image.
          2.          Burn the DVD Image With Mac OS X
          ◦          1 Launch disk utility again.
          ◦          2 Select "Burn" in the disk utility toolbar.
          ◦          3 Find where you saved the image if you didn't save it to the desktop.
          ◦          4 Click on the DVD image and then click on "Burn."
          ◦          5 Insert a blank DVD into your DVD drive and your DVD should be ready in no time.
Lastly, if I just want to watch a movie, what application do I use? (sorry if this sounds dumb)
Thanks, Janet

Most DVD are copy protected, that could be the problem.

I have created a movie in 16:9 format. I have created an iDVD pane in 16:9 but when I preview the movie that pane changes to 4:3 and burns the DVD as a 4:3 movie. How can I stop that, please I am in Snow Leopard, using FCE4.0.1?

I am using Snow Leopard and have created a movie in 16:9 format (SD not HDV) I created a movie which stays in the 16:9 format in fcp file, .mov fiule and MP4 file. I created an iDVD pane in 16:9 but when I play the movie in the iDVD preview window the iDVD pane switches to 4:3 and it burns the DVD in 4:3. How can I stop this so I get a16:9 DVD. Thanks for any help offered
James Bowman

Hi
As I see this I see two parts
• Howto go from FinalCut to iDVD
• Howto set iDVD right
In FinalCut Express (to 4) or Pro (to 6 - most probably 7 too)
• One has to set Anamorphic in the Browser window - menu columns
• Export as QuickTime movie .mov - NO QUICKTIME CONVERSION
In iDVD there are TWO places to set - WideScreen
- Start a NEW iDVD project - AND HERE SELECT WideScreen 16:9
- in Project - select Projectinfo
- now set WideScreen 16:9 - Here too
This use to work for me.
FOR FinalCut Pro-X - I have not a Clue - as I don't use it. SORRY
BTW - There is a good practice to before BURNING the DVD do
• Save as a DiskImage
• Test this by using DVD-Player tool
And if it is OK Size and All - then burn it by using
• Disk Util tool
• here set down burn speed to x4 or less (less burn errors = plays on more devices and better)
• Not using Memorex or NoName etc cheap media - as they usually DO NOT WORK as Video-DVDs
• I use Verbatim DVD-R as they play on more and even older DVD-players
Yours Bengt W

Burned FCE DVD movie jerks, stops

Similar Messages

Maybe you are looking for