Burned itunes CD won't play on external players!!

I recently purchased music from itunes, created a playlist, then burned onto a CD. It will play back in the itunes player and it even shows the tracks, but won't play on any other CD players or even on my windows media player( player 10 napster)! When I tried to play on another player all it showed was #1 and then went to #15 with the time of 68 min. which is what I burned but no sound available. I did do sound check before burning. Can anyone help me? Thanks Reddox2
  Windows XP Pro  

How did you burn the disk, as a data disk or as an audio CD (check your Burning preferences in iTunes)? If you burned the disk as a data disk, that's essentially just a backup and will only play in iTunes. You have to burn the disk as an audio CD to play it in any other player.
Hope this helps.

Similar Messages

  • Burned dvd-r won't play in external players

    I just upgraded from an iMac G5 to a Power Mac. I was using DVDSP on my iMac and never had any problems burning. I recently burned a small project from DVDSP onto the same exact DVD-R media that I've always used (Memorex) and went to play it on the same exact external DVD player that I've always used (Toshiba), and the DVD wouldn't play. I also tested it out on my friend's sony dvd player, and it also wouldn't play. It plays fine on my computer. I used the same exact settings that I did on my iMac (field order:bottom; two pass VBR; max bit rate of 8.2; "Best"). Out of curiosity, I also tried burning a dvd from iDVD, and that also wouldn't play on the external players. I then tried burning an audio CD from iTunes (again, using the same exact settings and same exact media and external CD player), and the CD wouldn't play, except on my computer. I even tried burning the CD at a lower speed (8x), but that made no difference.
    I took it into the Apple store, and they replaced the optical drive. However, as I suspected, that did not solve the problem at all. So here I am having just "upgraded" to a Power Mac from a perfectly good iMac, and I have lost all functionality of these programs. I believe it is an issue with Tiger, since I did not have Tiger on my iMac. I did download the Pro Application Support 3.0 when I first got the power mac, which I thought was supposed to solve problems that people were having under Tiger.
    I have also read people's entries here which suggest using Toast to burn with. Honestly, I don't see that as a solution, unless Apple starts including it with their systems. These programs (DVDSP, iDVD, iTunes) all have their own burn functions which are supposed to work. And they did work on my iMac, without fail. Does anyone have any suggestions?

    I used the same exact settings that I did on my iMac (field order:bottom; two pass VBR; max bit rate of 8.2; "Best").
    It sounds like you have some other issues going on since nothing is working properly it sounds like, usually first thing to check is that bit Rate which is high, but it sounds like nothing is working
    Have you tried reparining permissions after the updates? Have you tried making a new user/account and see if that works? Which version of Tiger? Is this a new Power Mac or an older one (in other words is somehow the burner not rated for the media you are using? That one is a stretch....) How about RAM, any after market RAM (like buy a Mac get 512 Meg upgrade) sometimes that RAM is buggy and can cause issues, though never heard of this happening

  • DVD burned from img won't play in other players

    In order to back up an old DVD I had to protect it from damage, I ripped it with handbrake and encoded it as a diskimage via iDVD. As the movie was 1.5 hours in length I used the professional setting under project info. After approximately 12 hours of encoding the disk image finished. I can open the disk image with DVD player on the mac and it performs perfectly. I used the disk utility to burn the disk image to a Memorex DVD+R without incident. This morning I tried the burned DVD in my xbox360 which read it as a mixed media disk and would not play it. Next I tried in my sony blu ray player which read it as a photo disk with no photos on the XMB.
    What do I need to do to have the burned DVD work properly? Are the DVD+Rs bad or is it something with the encoding? Thanks in advance for your help. I am a pretty big novice to iDVD and the whole process.

    To create an image file, launch Disk Utility and select File: New: Disk Image From Folder. In the window that appears, navigate to the desired folder (the DVD) and then click on Image. Give the image file a name, and click on Save when prompted. That’s it.
    How to copy previously-burned DVD-R video discs
    http://support.apple.com/kb/HT2059

  • I have iTunes Match, but some of the music I loaded from CDs and I can see in the iTunes store won't play. It recognizes the album but is playing literally the only 3 songs I don't want to listen to.

    have iTunes Match, but some of the music I loaded from CDs and I can see in the iTunes store won't play. It recognizes the album but is playing literally the only 3 songs I don't want to listen to.
    How do I get to play all of my music that should be stored either on the computer or in the cloud?

    Hi,
    Initially your music should be in your iTunes library on your computer. Once match completes its scan, your music will have been matched or uploaded. I suggest that you add iCloud status column to song view. This will tell you what has been matched, uploaded, purchased, inelligible, duplicate or waiting. What is the status of your tracks that are not playing.
    If space is not an issue, I suggest that you keep the music on the internal hard drive otherwise you can delete the tracks and play from cloud. In both instances, you should maintain a back up of all your music on a separate hard drive.
    Jim

  • Copying/burning a dvd, won't play in a dvd player

    Before my disk drive was replaced I could take a dvd, copy it and burn it to a disc (i.e., make a copy for myself), ad it would pla in my dvd player
    Since then when I make a copy of something and burn it, it won;t play in ant DVD player. Will play onthe computer though
    What settings do I need to change?

    Musicwind is right, there's no way to do what you describe without third-party tools. A commercial DVD, like what you'd be using in a DVD player, cannot be copied using the Finder or Disk Utility, due to copy protection issues. Are you using something like Handbrake to rip the DVD, or is this not a commercial DVD that you're copying?

  • Mp4 file is bugged? Won't add to iTunes and won't play.

    I just downloaded the Lord of the Rings extended trilogy on bluray with a redemption code I got in the box set I got for christmas. They worked fine, until, while changing the album name of the three movies, the return of the king, while trying to change the album artwork, iTunes went into Not Responding mode, and I force quit it. When I came back, I couldn't play the movie, change it's artwork or anything, so I deleted it from my library and tried to reload it back in with the file in my iTunes folder. But not only would the movie not add to iTunes, it won't play in Quicktime or VLC, and when I tried running it through Handbrake it wouldn't work. Has anyone experienced this, and if so, how did you fix this? Thanks.

    Hello GlitchedPanda,
    Thanks for using Apple Support Communities.
    Please follow the article below to troubleshoot this issue of your iPod not being recognized by iTunes.
    iPod not appearing in iTunes
    http://support.apple.com/kb/TS3716
    Take care,
    Alex H.

  • Itunes 12 won't play any tracks. Selection appears in box at top of screen, but won't play and time doesn't count down. Controls have no effect.

    Itunes 12 won't play any tracks

    Hi there Wellington451,
    Welcome to Apple Support Communities.
    It sounds like there is an issue playing audio tracks in iTunes on your PC. Take a look at the article linked below, it provides a lot of great troubleshooting tips that’ll resolve most issues like this one.
    iTunes and QuickTime for Windows: Audio does not play or plays incorrectly - Apple Support
    Cheers,
    -Jason

  • I downloaded a song on iTunes, it won't play (it's name is grey), it shows up in purchased and says "play", but it won't play, I can't delete it, and I can't re-download it.....this is confusing please help!!

    I downloaded a song on iTunes, it won't play (it's name is grey), it shows up in purchased and says "play", but it won't play, I can't delete it, and I can't re-download it.....this is confusing please help!!

    Hello CTGame,
    Welcome to Apple Support Communities.
    It sounds like there’s a grayed out song in your iTunes library that can’t be played or downloaded again like other past purchases. Try taking a look at the article linked below and verify the computer is authorized to play that content.
    How to troubleshoot iTunes Match - Apple Support
    Songs appear to be missing
    Songs containing DRM (Digital Rights Management) might not appear in iCloud, or might appear grayed out. This can occur if your computer is not authorized to play that content. Try authorizing your computer, then manually update iTunes Match. To determine what Apple ID your computer needs to be authorized for to play a specific song:
    Locate and select the song in your iTunes library.
    Choose File > Get Info.
    In the Summary tab, locate the Account Name field in the right column. Write it down.
    Click OK.
    Choose Store > Authorize this Computer.
    Type in the account name from the Summary field and enter its password. Click Authorize.
    Choose Store > Update iTunes Match.
    So long,
    -Jason

  • I have about 5 purchased movies through itunes that won't play because something is "missing" can anyone help

    I have 5 purchaced movies through itunes that won't play because they say something is "missing", can anyone help\

    Hi Sophie ,
    I would request you to please unistall Acrobat with the help of cleaner tool .Here is the link for the same.
    http://labs.adobe.com/downloads/acrobatcleaner.html
    Then try installing back again .Refer to the following link download Acrobat X pro .
    https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
    Let us know how it goes .
    Regards
    Sukrit Dhingra

  • My itunes player won't play my songs. I hit play, the button switches to pause, but it doesn't play and bar doesn't move. Any ideas?

    My itunes player won't play my songs. I hit play, the button switches to pause, but it doesn't play and bar doesn't move. Any ideas?

    Hey, did you get any help on this? I'm having the same issue.

  • ITunes Burns but CDs won't play - why?

    Using Leopard, I burn a playlist in iTunes to CD. CD finishes and song tracks are visible, but CDs won't play either in CD player or computer. Why? This just started a few weeks ago. Have burned successfully many times before. Have "Audio CD" selected in preferences, etc. Can anyone help? Thanks a million.

    I'm having the same trouble. Used to burn just fine until a little while ago. Now, it just hangs up iTunes in an eternal burn cycle. I try to force quit again & again & again but iTunes just sits there, with the blank disc whirring and spinning inside my machine. Cannot force quit so I have to restart just to quit iTunes. When the CD shows up on desktop (and in iTunes) after restart it looks like a normal, properly burned CD, complete with song titles. But when I play it, it's just erratic digital noise.
    ***????

  • CDs burned using iTunes won't play in CD Players!!?!!

    Hey Folks,
    The first song or two will play or have bad sound quality, but after that the cd freezes up and won't play anymore. This happens with the cd player in both of my cars and on my home stereo. I use a lite-on 52X and I can't figure out what's going on with it. Has anyone else experienced this or has a solution for it.
    Thanks.

    I am having the same problem, but have no answer as to the cure.

  • Itunes library won't play music on my ext hdd

    I have approx 1400 cd's catalogued on itunes (library) the music is stored on a portable hard drive.
    When I try and play a song it tells me itunes cannot locate the file, it then asks would I like it to locate the file.
    When I answer yes it will take me straight to the hdd that the music is stored on yet it still won't play it unless I play it from the portable hdd.
    With 490gb of music and still more to back up.
    I am using a MacBook Pro and have itunes v11 if that helps
    Supplementary question, I number my discs (I am an ex dj) but with itunes I got to 999 and then had to start at number 1 again does anyone know a way around this?.
    Any help will really be appreciated
    Thank you

    #1 Is the hard drive on and mounted before starting iTunes?  iTunes will look only once, at startup, for things on an external drive.  If the drive isn't there (it is not on, or it is sleeping) it won't look again.
    #2 I think you are running up against something hard coded into iTunes.  3 digits max (same applies to BPM).  iTunes is likely programmed with the general consumer in mind, who will use it in a straight-forward manner as intended.  Some DJs find it limited in some features but then it likely isn't programmed for DJs.  An alternative for you is to think outside the box.  For example, "Show" is a tag not normally used for music, but you can store information there too which goes beyond 3 digits/characters.  Note, however, it is only stored in iTunes. If you delete a music track and add it again the stored information is not embedded in the music file and is lost.

  • ITunes movies won't play after backing up library

    I recently ran out of hard drive space on my macbook pro so I decided to move my iTunes library to an external hard drive to make space. Since doing so the movies that I bought on Itunes won't play. Everything else is fine. The music plays but the TV shows and movies won't play. There was an error message the first time that I tried to play it but I have never seen it again and I didn't write it down. Something about a file missing. Has anyone successfully fixed a similar problem?

    so I decided to move my iTunes library to an external hard drive to make space  
    I'm guessing you moved the /iTunes media/ folder to the external yourself?
    There was an error message the first time that I tried to play it but I have never seen it again and I didn't write it down. Something about a file missing.
    iTunes prefs - Reset warnings.
    Double click a movie to play it.
    When it comes up and asks if you want to locate it, click Yes, then go to /iTunes/iTunes media/Movies on the external and find the movie.

  • When I move audio from itunes it won't play in the movie. How do I fix that ?

    When I move a song from iTunes into a movie, it won't play when I play the movie.  The movie file might be too big. 
    How do I fix that?

    Hi
    To get my Audio working I do
    • only use .aiff 44.1kHz or 48kHz
    • .mp3, .wma etc - all I convert to .aiff first
    • from iTune - I do - Collect needed audio into a new PlayList - Then I burn this as an Audio-CD (not .mp3 - only .aiff) - then I use the files from this Audio-CD in my movie projects
    And by doing like this - I have very few Audio problems.
    Yours Bengt W

Maybe you are looking for