Burner no longer working after software update 10.4.10

My burner on my iBook G4 was just working last week. I just updated to Mac OS X 10.4.10. Now when I put a CD in, OS X asks me if I want to ignore or open the CD with an application like normal. Then when I try to burn something to the CD, the CD-ROM drive tries to access the CD-R multiple times before it gives up when I eject it. It can still read CDs and DVDs, but just cannot burn CD-R's. I tried multiple blank CD-R's that I worked before. I also tried restarting and the startup diagnostic passes. Definitely seems like a software issue.

Hi erik,
Does the iPhone have a Wi-Fi address? If not the issue and possible resolutions may be in this article: http://support.apple.com/kb/TS1559
Does the iPhone get an IP address after joining the Wi-Fi network?
Does the iPhone join and get a valid IP if wireless security is disabled?
Jason

Similar Messages

Touch no longer works after software update

After downloading new software update, I got an error message during installation. Troubleshooting information recommended a restore. After doing a restore and using the most recent backup (which turns out to be my ONLY back-up) I am unable to change playlist with iTunes. I am unable to manually add anything. ANY suggestions?

Thank you to the community for the replies.
Its very frustrating to be having email issues. I'm here to help. Did Any of these suggestion resolve the issue? Have you downloaded any applications that effect or sync email? Are you still experiencing sync issues? As long as your device is backed up with Gmail and you know that log in information. Please hard reset the device and attempt to add the corporate e-mail again.
Thank you

Corporate e-mail no longer works after software update

I recently upgraded to GB and can no longer get my work e-mail through Corporate Sync. "The device cannot be provisioned on this server." My IT group has changed nothing on their end. I've tried several freeware apps with no luck getting errors like "This server requires security features your phone does not support." Up until the software update, my phone was fine and I'd been syncing for eight months using corporate sync.

Thank you to the community for the replies.
Its very frustrating to be having email issues. I'm here to help. Did Any of these suggestion resolve the issue? Have you downloaded any applications that effect or sync email? Are you still experiencing sync issues? As long as your device is backed up with Gmail and you know that log in information. Please hard reset the device and attempt to add the corporate e-mail again.
Thank you

IPhone 4 Volume no longer works after Software Update

Hey Guys,
     I just got a hand-me-down iPhone 4 and alas the Volume buttons, ringer switch is broken. I know it has since iOS 5.1 OTA Software Update and I was wondering if there was a fix? If so, please provide detailed instructions or a video. I do NOT want to jailbreak it since it would be tethered (iOS 6.0)
                    Thanks,
                                   bitman

Thank you to the community for the replies.
Its very frustrating to be having email issues. I'm here to help. Did Any of these suggestion resolve the issue? Have you downloaded any applications that effect or sync email? Are you still experiencing sync issues? As long as your device is backed up with Gmail and you know that log in information. Please hard reset the device and attempt to add the corporate e-mail again.
Thank you

MPEG-2 files no longer working after Software update

Quicktime 7.5 has been installed for a year and played .mpg files just fine up until today. Now it gives a "this is not a video file" error. The MPEG StreamClip Application for converting files also magically stopped accepting MPG unless I fork over $20 for some MPEG-2 component! What the heck
Graphics card was upgraded from a 7300 to a 8800 yesterday and there were some Quicktime things in the Software Update which ran last night. Why would either of those eliminate my ability to view MPGs? Final Cut also quit functioning with those files.
Need some help here fast!
Thanks

Sure enough! Went back and put the DVD in. One of the first thing it auto-installed was the component. Cancelled out the rest of the install and good to go.
thanks

WiFi no longer working after software update

I have had my iPhone 3g for about 3 weeks. Everything worked fine at first. I was able to connect to my home wifi. After updating the iPhone software - I noticed I could no longer connect. The network shows up and I enter my password but I cannot join. I also noted this at 2 open wifi areas - whole foods and a friends house.
I have rebooted the modem, rebooted the phone, reset my network settings, and restored the entire iPhone. Nothing has worked. I spoke to Apple support and it sounds like they will send me a new phone...but I feel like this can probably be resolved with the phone i have, TIA!

Hi erik,
Does the iPhone have a Wi-Fi address? If not the issue and possible resolutions may be in this article: http://support.apple.com/kb/TS1559
Does the iPhone get an IP address after joining the Wi-Fi network?
Does the iPhone join and get a valid IP if wireless security is disabled?
Jason

Many Apps no longer working after software update

I recently updated my iPhone software and since then many of my apps don't work. usually wat happens is that when i click on an app the screen will go black for a few seconds then go back to my home page.

Many applications aren't yet update for compatibility with the 3.0 software... that could be a part of the problem with some of your apps.
Suggest you try the following 2 steps. Do the first step and see if that fixes the problem If not, do the second.
Restart iPhone: Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the Sleep/Wake until the Apple logo appears.
Reset iPhone: Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.

Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?

Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?
Ron Bell
[email protected]

Mozilla, like many other software companies, thoroughly test their software before releasing it to the public and I'm sure that no problem you are having is intentional.
I do not work for Mozilla but I do have experience of releasing software for public usage.
Firefox has no way of knowing what other software is already on your computer and with millions of combinations it isn't always possible to test for every scenario.
You can go back to the old version of Firefox but that won't always solve your problem.
The web site below tells you how:
https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox

We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

Zap the PRAM and Reset the SMC, then try again.

Headphones no longer work after ios8 update to Iphone 5

My plug in head phones no longer work after updating to IOS8. I thought it was the head phones and bought new ones - they don't work either. I updated my iPad and both head phones work. Phone is IPhone 5 - not due for an upgrade until December. Any suggestions?

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.

Md5 reborned hasher 0.9.0 no longer works after firefox update to version 20 ,redesigned download box doesn't give option

md5 reborned hasher which has worked previously no longer works after update to FF version 20 . the redesigned download box doesn't give the option to use the hasher.

If you use this add-on a lot, you might want to switch back to the old style download manager until the add-on's author can bring it up to date. This thread describes how to make the switch: [https://support.mozilla.org/en-US/questions/955204 Got new version, want to go back to previous download box, the new one has no history and doesn't show speed of download, how do I go back?]

Phone not working after software update!!

i dont know if anyone could help me but i recently done a software update for my blackberry torch 9800 and after it upddated it hasnt been the same the screen isnt the same some of my icons are missing and nothing is right and i done a software downgrade to see if that would help and it didnt make any difference and i have removed the battery several times but it does not seem to be working and i do not know what to do! so if there someone who might be able to help me i would be very greatful.

Hi and Welcome to the Community!
Please refer to this official download portal as you proceed. It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
http://us.blackberry.com/support/downloads/download_sites.jsp
From a PC, you can install any compatible (e.g., for your exact BB Model Number) OS package to a BB via this procedure:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. After installing the OS package to your PC, please remeber to delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
You may also want to try the "Bare Bones OS Reload Procedure" to attempt to narrow down the precise causal item:
Load your OS "bare bones"...if anything is optional, do not install it.
If the behavior presents immediately, then try a different OS with step 1
If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
Add one thing -- no matter how tempting, just one.
If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
Repeat steps 4 and 5 until all things are loaded or the behavior presents
When the behavior presents, you know the culprit...the last thing you loaded.
If the behavior does not re-present, then you know that either step 1 or 2 cured it.
If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HP OfficeJet 6500A fax no longer works after Mavericks update

After updating to Mavericks and installing the HP software drivers, the fax component no longer works. I installed the fax part of the update, and when I print to fax, instead of triggering the machine to dial a number like it did in Mountain Lion, the printer prints out garbage text. There's no relevant support page on HP's website about this issue. Anyone got their HP fax to work via print to fax from their Mac?

Hello Peter,
It sounds like you are not able to fax from your HP OfficeJet 6500A. I recommend the following steps for the issue you described:
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Additional Information
Note: If your printer is wireless-capable, you should first add the printer to your network. Use the printer's control panel, or temporarily connect the printer to your Mac via USB. For more details, see this article.
You can find the full article here:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Thank you for using Apple Support Communities.
Best,
Sheila M.

Bluetooth headset no longer work after latest update

I use a Plantronics Voyager Pro bluetooth headset for Skype calling and Ventrillo on my Macbook Pro. Since after the latest update, it no longer works. Both input and output doesn't work and the applications hang for about 30 seconds. I've tried re-pairing the device to no avail. Both applications work if I switch them to the built-in microphone.
I also tried doing the same thing with a Plantronics 245 and I get the same issue.
Both headset work with my phone.

FIXED!!!!
Steps to UNF*ing your Mac.
1) Install an app called Pacifist
2) Download the individual installer for the Magic Touch Update here: http://support.apple.com/kb/DL1066 DO NOT INSTALL THIS
3) Load your OSX Install DVD
4) Open the MagicTrackpadMultiTouchUpd1.0.dmg in Pacifist
5) Open your OSX Installer DVD in Pacifist
6) Look at the MagicTrackpadMultiTouchUpd1.0.dmg package in Pacifist to see exactly what it installed and where.
7) Find these SAME EXACT FILES on the OSX Installer and reinstall them as root (e.g. using your admin password when asked)
8) Repair permissions (Do NOT skip this)
9) Reboot
10) MOST IMPORTANT: Never install the update again!!
Your bluetooth headset will work in skype after this. You will replace EVERY FILE THE MagicTrackpadMultiTouchUpd1.0.dmg package installed with one from the DVD. If you can not find it, the search bar in Pacifist works wonders.
You will get an error if you try to reinstall admin.framework about not having permission to install. This will be the ONLY file you will not reinstall.
Yes, you have more or less, in a very complicated fashion uninstalled the update (software update shows the Magic Touch update as needed afterwards).
Find me on Skype, where I will be able to walk you through it from my Plantronics Voyager Pro bluetooth headset at james.t.bolin
In case you developers want to know, I'll give you my play by play. After the installation of the update, it borked the bluetooth causing Skype to freeze. Reinstalling all the original kexts from the installer disk fixed the skype freezing issue, but there was still no audio. In fact, after reinstalling everything in the System>Library folder still left me with no audio, but it would not freeze or cause kernel panics at this point.
This is where I got the magic. I started replacing stuff in the usr directory. Upon replacing the usr>libexec>cups>backend>bluetooth; usr>libexec>hidd; usr>sbin>blued; and the blue.8 and hidd.8 files, I got audio back and the stars aligned in perfect harmony. I suspect apple needs to retool the kexts and rewrite the root level profiles.

Leopard USB install no longer boots after software update

Hi all,
I have recently installed Leopard onto a USB partition in order to perform maintenance on my main Leopard installation. Installation proceeds without a problem however after downloading software updates the USB partition will not boot successfully, despite there being no problems with the disk / volume structures / apparently anything at all. In desperation I also tried to install Tiger, which worked, however I have the same problem after updating - it will not boot! I don't think my hardware is at fault - Techtool Pro tells me all is in order.
Has anyone had this problem and if so, how did you fix it?
Thanks,
Jason

I just installed Leopard onto a USB 2.0 external hard drive for a dual-boot. It booted fine at 10.5.1 but is taking ridiculously long to boot after 10.5.2 (I just got it to finally boot after the update while waiting more than 40 minutes!).
It seems that you may want to attempt booting several times - maybe turning off the machine in between or booting to the internal OS first and then to the external. Can't help you much beyond that as this is my introductory experience with this mess.

Burner no longer working after software update 10.4.10

Similar Messages

Maybe you are looking for