Burning 16 X DVD's on My G4

I have a Powermac G4 that I bought back in 2001. I still have the original Superdrive (Pioneer 103). I have updated the Superdrive to the 1.9 version.
My questions is this: Can i burn 8x-R or 16x-R DVD's in this superdirve without ruining it? I have only used 4X-R DVD's - and they are now impossible to find.
I just wanted to know if I can use the more current products before I do something that I could truly regret.
Thank you for your help!

Hi, Paula!
In my opinion all of the response you've received from our fellow members thus far have a lot of merit. You may use high speed media with a low speed burner, but the incidence of burn issues may tend to increase. Such use should not, however, harm the optical drive.
If you seldom burn DVDs, my advice would be to go ahead and use the high speed discs. I'd test their playback/readability after burning, though. If, however, you burn a lot of DVDs, then my best advice would be to purchase and install a new, modern optical drive, such as Forrest has recommended. Installation is relatively easy (we can assist/guide you) and the speed of your burns will dramatically increase.
If you're in the United States, you can purchase a new Pioneer DVR-112D burner here for $36 with shipping already figured in.
If you burn a lot of DVDs, you might consider bulk-puchasing them, saving money over typical retail store prices. I use Ritek 8x and 16x discs and Taiyo Yuden 16x discs which I usually get from Supermediastore, reliably burning hundreds of these things on a NEC drive and a Pioneer drive over the course of a year. I'd find a specific type and brand of disc that works well with my burner, test the results on different machines/DVD players, and then stick with it.
Gary

Similar Messages

Error 0x800703EE on Win 8.1 machine when I tried to burn a DVD.

Hello,
I have below mentioned error when I tried to burn a DVD on my HP laptop.But same file can be copied to the USB drive without a problem.Can I have a solution for this ? Thanks in advance.
Error message : Error 0x800703EE : The volume for a file has been externalley altered so that the opened file is no longer valid.
Note : Win 8.1 - 64 bit

I have sorted out above issue by disabling the defender and Fire wall.Cheers ! :)

Sound problems with film made in iMovie when burned to DVD in iDVD

PLEASE HELP!!!
I have upgraded to iLife 09 and for all the bad that people have to say, I actually like it a lot. Anyway, it gave me the encouragement I needed to play with some old home movies I had stored with the aim of producing DVDs to give to my friends, and hopefully showing off the slick production values I have come up with.
So after spending a week getting to grips with iMovie and editing an old holiday film with all the cuts, transitions, chapter markers and music etc that I wanted, I ended up with an hour long movie that I was happy with.
Then to iDVD. After trying out all sorts of ways to go from iMovie to iDVD to ensure the best quality, I have finally given up trying to replicate the on screen quality of the movie in iMovie with the finished DVD, and just opted for the easy to use 'share to iDVD' option. The quality is not great, but then the footage is old anyway so not too much of an issue.
Then I spend another few days playing with and learning iDVD and again end up with a finished product that I am happy with, with nice looking menu's and a slideshow etc.
So I come to burn the final DVD, for which I pick the 'Professional burn' option which takes 4 hours but I am happy to wait if it means the best quality possible, and my DVD is done.
I then play the DVD to discover my problem - the sound in the movie is not right. To explain further, in my movie I have reduced the sound of some of the film clips to nothing and placed music over the top. When played and previewed in iMovie it works fine - the music plays and the sound that is attached the the video does not. When previewed in iDVD it works fine - just as I had edited it in iMovie. But then when I burn the DVD, some of these sounds are present again which completely wastes all my hard work at the editing stage.
I have searched and searched for help on this but am unable to find any.
Sorry for the very long description and story behind my issue, but it is massively frustrating. Basically, at some point during the 'burn to DVD' stage in iDVD it decides to completely ignore most of the sound edits I have made on the movie in iMovie.
If anyone can help it would be much appreciated.
Many thanks in advance.

Many thanks. Looking at that thread it looks like there are a few others having the same issue as me. Might be to do with not using the predetermined rates for clip slowdown and inputting my own.
The frustrating thing is that I have only done this once right at the start of my hour long movie and if I change it now it with though the timing of my whole film out.
Not much else I can do though I suppose.

Shaky Video when Burned to DVD

Hello all,
Call me an amatuer when it comes to camcorders. I have a Sony DCR-SR40 HDD camcorder and when I take video recorded on this device, transfer to my Mac, and then edit in HD 6, the video (when played back on a DVD) comes out shaky for action video where people are moving. It is almost like there are tracers when they are moving.
When the raw footage is played back in its native mpg format it looks fine, and when it is burned using Sony's "One Touch" DVD burn the video is not shaky or look like it has tracers, it looks fine. I am thinking it has to do with the quality of the image being recorded by the video camera and that when it gets compiled/burned to DVD it causes the shakiness. It has done this in iMovie HD 6 and in Adobe Elements 3.0. Is there a fix for this?
If it is just a camcorder issue, any recommendations for a good quality camcorder to capture sports footage (Football) that would burn great in iMovie and not have that shakiness/tracers?

>MPEG2 exported from Premeire, to quicktime, to encore
That is, to me, a backwards work flow
Mpeg2 is an output format... but you are using it as your source file in Premiere... what is the source of the file?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
You are then exporting to Quicktime... which Encore must then encode to MPEG2 to make a DVD (the VOB on a DVD is a renamed MPEG)
You are starting with a compressed file... exporting which may add more compression... and compressing again in Encore... it is no wonder your DVD has lost quality

Need HELP to burn 35 DVDs very URGENT !!!

I have created a 16/9 screen DVD, size 451 Mo.
Problem 1:
When I register it as Disk image, I cannot open it on my HD to preview before burn it. When I click on the icon, it says "specify application", so I put iDVD, but it doesn't open. So I burn my project directly from iDVD. It takes time. I need to burn 35!!! Is there is possibility to fixe it, or I have to encoder every time I have to burn the same DVD?
Problem 2:
When I burn my project to DVD-R x16 Verbatim, using "Optimal quality" or "Optimal performances", my quality image is suffering. Pixels are becoming too big (like 1mmx1mm mosaique), so it is difficult to read text and to see pictures. My original project is perfect. I thought I was DVD quality, because I was using DVD+R x16 verbatim. But it seems to be iDVD problem.
Thank to all who know anything about and can help. I have to deliver the project by the end of this week.

Problem 1 Follow these directions:
Suggest you create a disc image and then burn the DVD. File/Save As Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006
Problem 2 Burn the disk image with Disk Utility and select a speed 4X or slower from the speed pop-up.
G4 DP 1.25 GHz 2GB RAM 4 Drives 770GB Mac OS X (10.4.6) 2 SuperDrives (SL 8X & DL 16X)

I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow.

I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow. Can anyone help me?

Congratulations on the new Mini. Are you saying you tried burning and it does not play, or do you want to burn it only for the computer to be able to play it?
OS X Mountain Lion: Burn a CD or DVD may help.

Error Message while trying to burn a DVD-R with my MacBook Pro: "The disc can't be burned, because the device failed to calibrate the laser power level for this media.

While using my Mac OS X Version 10.6.8 to burn a DVD-R I keep getting the error message: "This disc can't be burned, because the device failed to calibrate the laser power level for this media."
So, I tried the iDVD and got the same error message.
Can anyone out there help me? I've tried both a DVD - R, and a CD.
I made a short 2:20 minute presentation from iMovie and used the "share" to iDVD, then to iTunes, then I tried exporting it to Quicktime and saved it on my desk top. That is when I tried burning by opening the blank DVD-R in the finder then draging the movie on to it and selecting the burn option. Thank you for your time in helping me with this frustrating problem.
Peace, Pyxidis

I have had that same problem, but it was unrelated to any upgrade.
In my case the optical drive was simply failing, and I replaced it - it was a Powerbook, about eight years old.
It is possible that it's unrelated to Lion, as unlikely as this may seem, since you've just upgraded.
Optical drives seem to be the most life-limited component in these computers. The laser just seems to get weak with age.

Is it possible to burn a DVD from FCPX in 16:9 aspect ratio?

I am using FCP X 10.1.1 on an iMac with OS 10.9.3
I have HD video shot in 1080X720. I realize a dvd isn't HD, but I would like to try and get the wide screen aspect. Is that even possible? I would love any sort of assistance! Thanks much!
-R

Yes.
Just go ahead and burn the DVD which will finish up with whatever aspect the project is.
A 16:9 aspect ratio has nothing to do with hi-def, it's just that hi-def in the last 10 years has adopted that ratio but it was used long before then, together with 4:3, for standard def DV.

I have created a movie in 16:9 format. I have created an iDVD pane in 16:9 but when I preview the movie that pane changes to 4:3 and burns the DVD as a 4:3 movie. How can I stop that, please I am in Snow Leopard, using FCE4.0.1?

I am using Snow Leopard and have created a movie in 16:9 format (SD not HDV) I created a movie which stays in the 16:9 format in fcp file, .mov fiule and MP4 file. I created an iDVD pane in 16:9 but when I play the movie in the iDVD preview window the iDVD pane switches to 4:3 and it burns the DVD in 4:3. How can I stop this so I get a16:9 DVD. Thanks for any help offered
James Bowman

Hi
As I see this I see two parts
• Howto go from FinalCut to iDVD
• Howto set iDVD right
In FinalCut Express (to 4) or Pro (to 6 - most probably 7 too)
• One has to set Anamorphic in the Browser window - menu columns
• Export as QuickTime movie .mov - NO QUICKTIME CONVERSION
In iDVD there are TWO places to set - WideScreen
- Start a NEW iDVD project - AND HERE SELECT WideScreen 16:9
- in Project - select Projectinfo
- now set WideScreen 16:9 - Here too
This use to work for me.
FOR FinalCut Pro-X - I have not a Clue - as I don't use it. SORRY
BTW - There is a good practice to before BURNING the DVD do
• Save as a DiskImage
• Test this by using DVD-Player tool
And if it is OK Size and All - then burn it by using
• Disk Util tool
• here set down burn speed to x4 or less (less burn errors = plays on more devices and better)
• Not using Memorex or NoName etc cheap media - as they usually DO NOT WORK as Video-DVDs
• I use Verbatim DVD-R as they play on more and even older DVD-players
Yours Bengt W

Does iDVD work with Maverick? This is the first time I tried to burn a DVD using iDVD after upgrading to Maverick. It seems to get stuck at encoding menu stage and not doing anything.

I tried to burn a DVD using iDVD after upgrading to Maverick, first time I tried after upgrading to Maverick a few weeks ago. It seems to get stuck at encoding menu stage and not doing anything. Does anyone else have the same problem?

I did not have a DVD handy to burn but I have just created a small 2 minute video and created a Disk Image and also a VIDEO_TS folder, the encoding worked correctly, so it works with some items.
You may get a better responce in the iDVD forum.
https://discussions.apple.com/community/ilife/idvd
regards

I am trying to burn a dvd on my mac book pro but it comes up with an error code 0x80020022. How do I fix it? Thanks

I am trying to burn a dvd on my mac book pro but it comes up with an error code 0x80020022. How do I fix it? I have tried rebooting through PRAM and various other options that I found online, but nothing has helped.
Thanks

Try using a different brand of DVD's.

I have created an extensive slideshow w/music on my MacBook Pro iPhoto. How do I export a slideshow so that I can burn a DVD from it? "Help" does not offer info for this request, only if you want to export to another Apple device. Help!!!

I have created a lengthy slideshow with music on my MacBook Pro under Iphoto. What steps do I need to take in order to burn a DVD copy of this slideshow? "Help" does not offer info for this transaction, only if you want to export to another Apple device and it shows that you must first export to Itunes. Can anyone help me with information on just copying to a DVD? I don't want to email it or show it on another Apple device. I want to be able to burn multiple copies on DVDs as a gift...... Can it be done? I'm not real computer savvy

Connect the device to the computer.
In iTunes, select the content desired to sync.
Sync.
This is all described in the User's Guide, reading it may be a good place to start.

How do I save my video in jpeg format so I can add picture to it and burn a DVD through Photo Explosion version 4

How do I save my video in jpeg format so I can add picture to it and burn a DVD through Photo Explosion version 4

LRP
Thanks for the follow up.
In Premiere Elements 13/13.1, your export choices are in the Publish+Share section of the project. There are several choices and sub-choices.
Example: Publish+Share/Computer/and then a list of choices under that, such as, MPEG, AVI, AVCHD, XAVC-S, Windows Media, QuickTime, Image, Audio.
And each has Presets which define the export settings. Adobe offers default settings which are usually optimized ones. But, it also allows you to customize the preset selected. You do that by clicking on the Advanced Button of the selected preset and customizing the settings under the Video Tab, Audio Tab, and, if applicable, Multiplexer Tab.
From what you wrote, I thought that you might be asking about exporting a video with a video codec = Photo JPEG.
To do that you would to to
Publish+Share
Computer
QuickTime
with Presets = either the one for 4:3 of 16:9 as appropriate for your project,
and then clicking on the Advanced Button, and then the Video Tab under the Advanced Button.
Then selecting Photo JPEG for the video codec field.
Tip: The QuickTime choice is not seen unless you scroll down the list of Computer choices. Use the thin scroll bar to the right of the Computer choices.
Please explore Premiere Elements 13/13.1's Publish+Share/Disc/DVD with standard or widescreen preset for your creation of the DVD-VIDEO on DVD disc.
The Premiere Elements timeline destined for this choice could consistent of supported photos and or videos.
Please consider.
Any questions and need clarification, please do not hesitate to ask.
ATR

How do I burn a DVD on my new iMac to play on external DVD player

I have a new iMac at work (3.5 GHz Intel Core i7), running on OS X Yosemite, and I'm trying to figure out how to burn a DVD that can be played on an external DVD player. I have a disc burner connected, but just noticed that iDVD (the way I used to burn video files) is no longer part of my installed applications.
Thanks for any help.
JC

If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Softwareor eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
If you're creating a slideshow in iPhoto and want to add it to an iDVD project export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

How do I create a shared library from iPhoto when the file is too large to burn on DVD?

I need to remove some photos (70 GB) to relieve a full hard drive. I have exported and burned .jpg images on DVDs, but that is only useful as a worst case backup. What I would like to have is a separate iPhoto Library for each calendar year of photos, so I could still view them in the albums and folders I have created to organize them. I have done this before in an earlier version of iPhoto, and was able to create 2003 iPhoto Library, 2004 iPhoto Library, etc. I put a copy on DVD (the full year fit on 1 DVD) and another copy on an external drive.
I am having problems doing this with iPhoto '09 (version 8.1.2). The iPhoto library for each year is too large to burn on DVD. When I select certain albums from the year that will fit on DVD and use the Share>Burn commands, it creates a library with Events and Faces, but none of the albums are listed on the left. The albums are important to organize the photos for viewing (birthdays, vacations, holidays, etc.) I didn't always pay attention to labeling Events when I imported photos, so that is not an adequate alternative to my albums.
I was thinking that if I could create a library for the entire year, it might include my albums and folders. I would have space for this on my external hard drive. However, I can find no way to create a library for the entire year and put it on my external drive - the only option is to burn a DVD or export .jpg images.
Any suggestions would be appreciated.

Best suggestion: Buy some external USB or Firewire drives. Move your Library to one, back it up to another. A lot more reliable than DVD, a lot less work and much more convenient. For a start, you don't have to break up the library...
Regards
TD

HT1583 When burning a DVD of photos and music from iDVD, the photos blur right before the transitions and the music has about 5 second glitches here and there before the music starts again. Is there any way to burn the DVD without this happening?

Each year I am in charge of making a slideshow of photos and music for my annual company meeting. I always use iDVD to set up my photos and music and then burn the DVD to play at the meeting. Every time I burn the DVD, it blurs right before the transition of the photo. It has always done this and I'm not sure why. It will also make the music glitch in a few spots for about 5 seconds or more. If I burn another DVD to try it again, the glitches will still be there, but in different spots. I've tried the highest quality of DVD's possible and this still happens. What can I do to fix this problem?

Try disabling transitions altogether!
There is a technical reason that this breakup happens - it is to do with how slideshows can be saved within the DVD specification, they can either be recorded as 'video streams' or as a collection of 'still images'.
When you add transitions iDVD has no option but to use a video stream, this can result in terrible 'breakup' because the mpeg 2 encoder isn't designed to handle scenes that are static with a sudden short change. You can see 'artefacts' in the video stream…
https://en.wikipedia.org/wiki/Compression_artifact
'Still image slideshows' avoid the issue altogether by only showing a static image, no video compression is used & because the scene doesn't transition so it shouldn't breakup.
NOTE: Music on the slideshow is irrelevant, both types can use a soundtrack.
I cannot remember if it is possible to force iDVD to only make still image slideshows, I always use DVD Studio Pro to correctly setup DVD's. I'd suggest you use the option to save the DVD to a disk image & then open that disk image so that DVD Player can preview it, that should save on the number of test disks you burn.
If you cannot make it avoid using video streams you may be ether off making your own video slideshow in iMovie & then import that into iDVD. It may eventually look better despite being a video stream!
iDVD isn't really condusive to professional levels of control.

Burning 16 X DVD's on My G4

Similar Messages

Maybe you are looking for