Burning a CD - error

I've made my playlist...I click burn CD...put my CD in...it starts writing song 1 then says canceling. Why can't I burn CD's? I've talked to other people and I'm doing what they are. My burner has made data CD's so I believe it's working fine. Any help is greatly appreciated.
Thanks!

Here's my CD diagnostics:
Microsoft Windows 2000 Professional Service Pack 4 (Build 2195)
Dell Computer Corporation Dimension 8100
iTunes 6.0.1.3
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), Cdr4_2K (2.5.0.93),
UpperFilters: GEARAspiWDM (2.0.4.3), Cdralw2k (1.0.0.10), Cdralw2k (1.0.0.10), pwd_2k (4.3.1.177),
Video Driver: NVIDIA GeForce2 MX\GeForce2 MX/MX 400
SCSI\DiskWDCWD400BB-75AUA1_____18.2, Bus Type ATA, Bus Address [0,0]
SCSI\CdRomLG_____CD-RW_CED-8080B1.04, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: LG CD-RW CED-8080B, Rev 1.04
Audio CD in drive.
Found 19 songs on CD, playing time 70:43 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:50:25
Track 3, start time 07:09:13
Track 4, start time 11:21:60
Track 5, start time 15:14:19
Track 6, start time 18:52:44
Track 7, start time 22:19:64
Track 8, start time 25:03:17
Track 9, start time 28:29:17
Track 10, start time 32:02:19
Track 11, start time 34:52:41
Track 12, start time 38:28:46
Track 13, start time 42:05:01
Track 14, start time 46:29:08
Track 15, start time 51:38:55
Track 16, start time 55:07:50
Track 17, start time 59:56:13
Track 18, start time 63:44:24
Track 19, start time 66:43:24
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 2 4 8.
The drive CDRW speeds are: 2 4 8.

Similar Messages

Cant burn cds (unkown error occurred: 4280) help

i cant burn cds an error always pops up (4280)ive read a bunch of discussions and tryed all of the different burning speeds and none of them work can someone plz help me...!
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
TOSHIBA Satellite A105
iTunes 7.0.2.16
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.1
LowerFilters: AnyDVD (6.1.0.7), PxHelp20 (2.0.0.0), DRVMCDB (1.0.0.1), Iviaspi (1.0.0.0), Pfc (2.5.0.204), DLACDBHM (1.0.0.1),
UpperFilters: GEARAspiWDM (2.0.6.1),
Video Driver: Mobile Intel(R) 945GM Express Chipset Family\Intel(R) Calistoga Graphics Controller
IDE\DiskHTS541010G9SA00_______________________MBZOC60R, Bus Type ATA, Bus Address [0,0]
IDE\CdRomMATSHITADVD-RAM_UJ-841S________________1.60___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
D: MATSHITA DVD-RAM UJ-841S, Rev 1.60
Drive is empty.
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive D: MATSHITA DVD-RAM UJ-841S on CDR media at speed 4X.

hmmm. i went to Toshiba to check for any available updates for your Satellite ... but they split out the downloads by subcategories for the A105, and so i'm not sure what your precise model is.
here's a link through to their technical support ... if you plug in the precise model number, are there any available updates for your particular type of A105?
Toshiba Technical Support Center

I am try to burn a dvd from iPhoto in iDVD, when I click burn I get error message I don't have SuperDrive and dvd is ejected. I have burned dvd's before. What am I doing wrong?

I am try to burn a iPhoto slideshow on to a dvd in iDVD, when I click burn I get error message and dvd is ejected. I have burned dvd's before. What am I doing wrong?

error message I don't have SuperDrive and dvd is ejected
If you don't have a SuperDrive you will not be able to burn DVDs.
Did iDVD come preinstalled on your Mac? If it did then you should have a SuperDrive and be able to burn DVDS. Check the Disk Burning section of System Information
to see what you can read and write with your optical drive:
OT

Attempt to burn failed - 4450 error

I see at least two other people have encountered this error. I put a new CD in and attempt to burn some purchased songs to it. The process starts, looks like it's working on the first song, and then I get a message that iTunes is cancelling the burn and the error:
"The attempt to burn a disc failed. An unknown error occurred. 4450."
When I check the CD, all the tracks are list as 1KB .cda files which is, of course, enough to make the CD useless.
I found a KB article at one point that suggested updating my CD drivers. I checked but there were no newer ones that what I have installed already. Has anyone solved this problem in any other way? My CD drive is listed as LG CD-RW 8080B when I look in device manager. I also just updated to the latest version of iTunes.
Compaq Presario - Pentium III Windows XP Pro

I'm having exactly the same problem. Get the message after it burns the 1st song. I've run the latest Itunes updates, tried to reinstall it, same problem. Gone through 10 blanks now, very frustrated, never had the trouble before. I've tried Maxell & TDK discs. Moved burn speed way down, still no deal. No updates are available for my driver either. Here is my diagnostic. I keep seeing others with this problem, but no real solutions yet, argh.
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Computer Corporation Dimension 4300
iTunes 6.0.3.5
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: MxlW2k (1.0.1.101), Cdr4_xp (6.2.0.132),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: 16MB ATI Rage 128 Ultra\1002-5446-22
IDE\DiskWDCWD200EB-75CSF0_____________________04.01B04, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskST3160023A________________, Bus Type USB
IDE\CdRomNEC_NR-7900A___________________________1.08___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: _NEC NR-7900A, Rev 1.08
Audio CD in drive.
Found 11 songs on CD, playing time 34:04 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:35:33
Track 3, start time 08:15:43
Track 4, start time 11:23:64
Track 5, start time 14:46:11
Track 6, start time 17:35:63
Track 7, start time 20:20:67
Track 8, start time 21:55:06
Track 9, start time 26:27:52
Track 10, start time 28:46:42
Track 11, start time 31:31:32
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 16 20 24.
The drive CDRW speeds are: 4 8 16 20.
The last failed audio CD burn had error code 4450(0x00001162). It happened on drive D: _NEC NR-7900A on CDR media at speed 4X.

Having trouble burning discs, sometimes error 4280 comes up, anyone know?

Having trouble burning discs, sometimes error 4280 comes up, anyone know?
sometimes it will say checking media, then it will do nothing!

Look around for more posts about this. There are TONS. I'm guessing you have upgraded to the newest Itunes. Which apparently makes you CD burning fail! Itunes needs to fix this problem but so far they haven't. I think there are little things that you can do to maybe fix it but I'm not sure so look around for other posts about this same kind of thing, anything along the lines of CD's not burning and error 4280. I wasted 5 CD's trying to get past this error thinking it was my CD's fault.

Burn failed (unknow error 261)

I tried to make a copy of a playlist on cd-rw. I got this message 'burn failed. unknown error 261'. Can anyone help me fix this problem?

Does the name of the playlist have any punctation in it? & or ? or @ signs? Try removing them and trying the CD burn again.

Non-administrator users cannot burn files (no error)

Hello,
clean install of Windows 7 SP1 x64, domain joined. Only local administrators are able to successfully burn a CD using Windows Explorer. When standard domain user tries to do it, the window with burning progress always suddenly disappears during burning without
any error or warning, and the "what do you want to do with blank CD" autoplay dialog is shown again. Needless to say the CDs are half-burnt and to be thrown away.
No error or warning in event viewer either, happens on all client computers. Burning using player compatible mode (not USB flash disk mode). Since local admins can finish the burning without any problems, I believe the discs, drive and drivers
are fine. No GPO controlling removable media (I guess that would result in an error or inability to start burning, anyway).
3rd party software seems to burn just fine even for standard users.
Any ideas what should we check to get the Windows Explorer burning working for standard users?
Thanks,
Jan

Hi Jan,
I considered that there should be any file which is access denied during burning when you use standard user.
Please install Process monitor to capture the process during burning when using standard user, and find our the access denied file or registry key, then take ownership:
Solving Access Denied Errors Using Process Monitor
http://improve.dk/solving-access-denied-errors-using-process-monitor/
Also, please check if the policy for CD rom is set:
User Configuration\Administrative Templates\Windows Components\Windows Explorer\Remove CD Burning Features
Local Computer Policy -> Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options -> Devices: Restrict CD-Rom access to locally logged-on user only
Kate Li
TechNet Community Support

Unable to burn disc, unknown error (-3)

Client has a Lenovo netbook with an External DVD/CD Burner. With current iTunes Win7 x64 release as of writing.
Whenever she burns a disc it preps the image and when it gets to burning, it pops the disc out and Messages me...
Unable to burn disc, unknown error (-3)
I've checked around and never seen this error code pop up at all on any suppport forums, any ideas I'm willing to try out.

So I got this error for a new playlist that I was attempting to burn. I noticed that it would fail when it reached a specific song in the preparing disc process. Nothing special about this song from what I can tell. I purchased it through iTunes along with the entire album. Once I removed that song from the playlist, it burns with no hangups.
Going to delete that song from the library and reload it from the cloud. Will report back if that helped.

Updated itunes to 12.1 and can't burn playlist. Error "attempt to burn disc failed, disc cannot be read or written to" have tried every troubleshooting solution to no avail. please help!

Updated itunes to 12.1 and can't burn playlist. Error "attempt to burn disc failed, disc cannot be read or written to" have tried every troubleshooting solution to no avail. please help!

Greetings akite2high,
If you are having an issue with being unable to burn a CD using iTunes on your Windows computer, I would suggest that you troubleshoot using the steps in this article -
Can't burn a CD in iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L

Can''t find CD burner or software error

I do have a CD burner and under 4.x I could burn CDs without a problem. When I upgraded to 5.0, I would get the Can't find CD burner or software error and other times it would just freeze when starting to burn a playlist to a CD. Now with 6.0 it seems the CD burner is gone. but it's still there. Can anyone help me to get back to burning CDs.

Im having that same problem! i downloaded version 6.0 and mine doesn't work either. i might try to go back to the older version. sry i can't help

Can't burn discs. Error message: The disc can't be burned because the device failed to calibrate the laser level for this media can't be burned because the device

Cannot burn discs. Error message: "The disc can't be burned because the device failed to calibrate the laser power level for this media". Then the blank disc is ejected.

Two main possible causes:
1. Poor media. Verbatim DVD-R work best, burned at only 2x or 4x.
2. Dirty lens. Try cleaning the superdrive with a proprietary CD/DVD lens cleaner that uses tiny brushes.

Idvd can't burn .mov with error message

Hi guys,
I just finished a 57 min. project with Final Cut Express4 containing 8 sequences. I export them separately. I burned them with idvd : File>Export>Quick Time Movie (self contained uncheck), I include Audio & Video as usual and save them in the Movie Folder as .mov; everything goes fine and I can watch them both in computers and TVs. But when I export the entire project with chapter markers (exactly the same way I did for the above), the result is different, and the idvd refuse to burn it, an error message says ”unsupported file type: broken reference movie”. Those exported in separate sequences are shown as .mov with a picture icon in my Movie Folder while the other 2 exported with chapter markers are also shown with .mov but with a QuickTime Movie icon. Although these with Quick Time Movie icon are not accepted by the idvd, I still can burn them through the dvdproj file, but the product can be played with computers only.
I know I must have done something wrong but I don’t know what it’s. Some one is kind enough to help please.
Thank you.
puisum

pui sum wrote:
First of all, thank you folks for the responds. I check back as suggested and found the following: -
Hi Al
All the Chapters Markers are more than 2 seconds apart and are more than 2 seconds from start points; all sequences are well butted without any gap in between. However there are markers marked a few frames after the sequences started, which means the previous sequence ended a few frames before the Chapter Markers. If this is overlap, what should I do from here? Please walk me through. Thank you again. puisum
Hi MartinR
I am sure you read my response to Alchroma. You both having valuable points. Now, this is a very good question “if I nest the sequences”. To be honest with you, I am not 100% sure what I did (because this project have been sitting in my computer for 9 months) I but I think I start the entire project with only one sequence at the beginning and I use copy & paste to make the 8 sequences after I put in the chapter makers. At this point, I have found some problems on the Chapter Markers and I am sure Alchroma doesn’t mind to walk me through then I will take it from there. Please don’t give up on me yet. Thank you in anticipation. puisum
The post above already has a Solved check mark on it.
Only 1 solved and 2 Helpful are allowed per thread.
This may help with for future posting:
https://discussions.apple.com/static/apple/tutorial/mark.html
The main thing is you have got the issue sorted out.
Al

Attempt to burn disk failed error 4261

Never had a problem burning disks. Just downloaded a new cd from itunes, and when I try to burn it onto a disk, part way through the burn I get a message "canceling disk burn" then an error message pops on "Attempt to burn disk failed, unknown error 4261". This has happened 4 times, and I am only allowed 7 burns on this new cd.
HELP!!!!!!!!!!!

CD Diagnostics posted below. Please advise. Thanks.
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Inc. Dell DV051
iTunes 6.0.2.23
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), sscdbhk5 (1.0.0.1), Cdr4_xp (7.0.0.162),
UpperFilters: Cdralw2k (7.0.0.162), pwd_2k (7.0.0.162), GEARAspiWDM (2.0.4.3),
Video Driver: Intel(R) 82915G/GV/910GL Express Chipset Family\Intel(R) 82915G/GV/910GL Express Chipset
IDE\DiskST3160828AS____________________________8.03___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STDVD+-RW_GWA4164B_______________D108___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: HL-DT-ST DVD+-RW GWA4164B, Rev D108
Audio CD in drive.
Found 11 songs on CD, playing time 64:37 on Audio CD.
Track 1, start time 00:02:32
Track 2, start time 05:15:10
Track 3, start time 12:43:37
Track 4, start time 17:42:52
Track 5, start time 26:47:65
Track 6, start time 29:53:15
Track 7, start time 36:04:72
Track 8, start time 41:36:10
Track 9, start time 42:24:25
Track 10, start time 48:12:12
Track 11, start time 53:05:35
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 8 10 16 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
The last failed audio CD burn had error code 4261(0x000010a5). It happened on drive D: HL-DT-ST DVD+-RW GWA4164B on CDR media at speed 16X.

Burn failed/ unknown error/ (1771)?

I just attempted to make a copy of the contents in my smart playlist, so as to have a copy of all my music in case during upgrading to iTunes 6 anything happens. Im using DVD's to make Data discs and the first one burnt fine and then it told me to put in another DVD which I did, but then I got this 1771 error. I have tryed numerous times since to burn the songs that didnt make it onto the first disc, but keep getting the same error. I have tryed 3 brands of DVD's but I dont think that is the problem, as I have used the same brand for at least a year now. Please help!

I am having problems creating a data DVD. At first I thought it was the type of DVD's I was using (DVD+R's); so I went out this weekend and purchased DVD-R's. The type of DVD's must not have been the problems since I kept getting the same error message (The attempt to burn failed. Error 1771). I know my DVD burner works because I created a movie in another program and burned it to a DVD. I'm convinced the problem lies with itunes but don't know how to fix it. I have itunes version 6.01 installed on my computer. I read the discussion string below find myself a bit confused. Can anyone please help?

HT1645 dvd wont burn only message-error multiplexing

dvd wont burn only message-error multiplexing

Read the posts by Bengt Wärleby posts on multiplexing errors in these topics:
HT1645 I was burning a DVD and the...: Apple Support Communities
HT1583 iDVD isn't burning a DVD. It...: Apple Support Communities
Follow this workflow to help ensure the best quality final product:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

MBP 17" EJECTS DVD DISC WHILE BURNING 2X SPEED ERROR CODE 080020063 BY LW

MBP 17" EJECTS DVD DISC WHILE BURNING AT 2X SPEED ERROR CODE 080020063 BY BIGHANDZ

Thank you. This has worked, but I don't know why as it isn't anything I didn't do the last time. What a difference a day makes.
Once again, thank you for taking the time to help.
Jim

Burning a CD - error

Similar Messages

Maybe you are looking for