Burning a CD shuffles the list on the disc, but I am not in "shuffle mode", how do I fix this?
I found tha twhen I burn a playlist to a CD, the list gets shuffled on the disc without my choice.
Under the 'controls' list, my 'shuffle' mode is off.
Where do I turn off this option?
Hi - thanks for responding.
It's for burning basic audio CDs, and I'll use my most recent example...
I just bought an album on ITUNES, and chose to burn it for the car...
The order of songs on the list is exactly as laid out on the CD; I changed nothing.
However, as the disc is burning, it is randomly shuffling the order of the songs onto the burned disc. I burned two discs of the same CD, and the song order on the completed disc was different both times, so it is being randomized onto the burned disc.
I double checked, and the randomizer(shuffle) is off, as the playlist would have been randomized, and it isn't.
got any ideas?
Similar Messages
-
The number pad would not let me type in a 1 2 3 for my 4 digit code. After numerous tries, the phone now says iphone disabled connect to itunes. When I connected to itunes, it asked for the code which I was unable to enter. Help!
Open iTunes on computer, connect iPhone to computer with USB cable. Hold both Home and Power buttons on iPhone until iTunes recognizes iPhone in Recovery Mode. This usually takes about 20 seconds of holding both buttons. Restore the iPhone Firmware.
-
When I try to reply to an e-mail, I get the message that the recipents e-mail address was rejected by the server because it does not allow relaying. How do I fix this?
Try this. Sometimes this is all that you need to do to fix that issue. Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional. -
Whenever I try to make a video on iMovie, the audio is not in sync with the video. This just happened recently. I have no clue what is causing the problem, or how to fix it. What should I do?
Hi samueldoherty,
If you are having audio issues during video playback in iTunes, you may find the following articles helpful:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Regards,
- Brenden -
hp netbook...configured for skype but now the mic picks up everything and tried to adjust it but still reverbs...did a system restore and even that did not fix it...what to do, what to do???
Hi sixxgirl69,
Please post your Product number (please don’t post your serial number). Here is a link to help you find it:
http://goo.gl/cNUc0
Thanks,
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
I am getting emails on my new iphone5, but when I try to reply it tells me "the recipient was rejected bythe server because it does not allow relaying" and I don't know how to fix it. Does anyone know how to fix it?
see the "more like this" section on the right side of this page as your question has been asked and answered many times already.
-
This seems to be common from all the threads about it.
Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN -
my phone was in the middle of updating to ios7 on itunes and got disconnected and now its stuck on activation what do i do to move it along?
http://support.apple.com/kb/HT1808
-
I purchased an album and some of the songs did not download completely. How can I fix this?
I have the EXACT issue as Hatchs88 and the response doesn't help. I found a 3 of 4 missing songs as "song".tmp file in the music directory but I can't do anything here... The iTunes store just says purchased and it doesn't the songs show up in the purchased list either. What's funny is that I was able to download on an iPod touch but I cant get it on my PC...
-
I purchased a song a few days ago and downloaded the whole song and the song will not play all the way through it only plays 23 seconds. How do I fix this problem?
Thanks for this post. It corrected my similar issue. Note that you need to exit from/re-enter iTunes after deleting the song from your Purchased list.
-
I have 4 iPads and one apple Id. Two the devices record clash of clans and dragonvale individually and the other two are tied to the other two. Drives my kids nuts. How do I fix this?
Also, I'd prefer to keep the same ID on both so I will keep access to my calendar/contacts/etc on both devices. Would I be able to share reminders and voice memos and the like as well? And how often would they update each other? If I edit a contact on the 5, and the 4 is in wifi, assuming they're both on my same ID, will the contact update on the 4?
-
Peace. My name is Free. Thanks in advance for any help u can offer. My iPod cannot be synced because the required file could not be found. How do I fix this problem?
Hi antiklady,
I see that you may be having an issue with compatibility of iTunes when connecting your iOS device. This sort of issue can arise if you have two versions of iTunes installed on your computer, which I feel may be the case. Here is an article that can tell you how to identify the version of iTunes that you have open:
iTunes: How to find which version you are using - Apple Support
http://support.apple.com/en-us/HT201521
If the version of iTunes that is opened is not the version you are required to use for the iOS device in question, try searching through your computer or applications folder to see if there may be two versions of iTunes installed on your computer. Then, uninstall the version that is incompatible using these steps:
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
http://support.apple.com/en-us/HT1923
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
After upgrading my iPhone4 to the latest IO it no longer connects to wifi, how do you fix this?
knifepainter wrote:
What I know is that the phone worked perfectly fine until I upgraded the software. I've tried resetting the network settings to no avail. I've shut the phone off, put it in a ziplock baggie and then into the freezer for 15 minutes. This made the wifi work temporarily but then it goes back to being grayed out. The wifi does not work at other wifi sites away from my home as well. Seems like an apple issue to me and would appreciate someone coming up with a fix, apparently I'm not the only one having this problem. Thanks for replying to my query, any ideas?
It's likely a hardware issue. The iOS will not directly cause this issue.
Use this article first:
iOS: Wi-Fi settings grayed out or dim - http://support.apple.com/en-us/TS1559
If that fails to resolve it, then try setting it up as new and testing again.
How to erase your iOS device and then set it up as a new device or restore it from backups - http://support.apple.com/en-us/HT4137
If the issue remains even after set up as new, it's a hardware problem, not a software problem. You'll need to contact Apple for you hardware service options. If within warranty it should be free. If not, expect to pay $149 USD + tax if it's an iPhone 4, $199 USD + tax if it's an iPhone 4S. -
when saving my illustrator file to a pdf it doesnt show all the artwork ie boxes are hidden in the pdf or only showing part of them. Even some text is hidden. I have flattened the artwork so everything is in one layer. How can I fix this?
Hi John
I have indicated on the attached jpeg where the problem is, basically a line of text is missing at the top and part of the feeding diagram is missing. I created the artwork in different layer and then flattened. All text has been converted to outlines, however the areas being affected have no transparency, I have used solid fills or no fills. I get the same result when I export the file as a jpeg. Hope you can help. -
I installed Elements 12 because my version of Photoshop (CS5.1) is not compatible with Yosemite. Now the Adobe Application Manager will not search for updates for any of the programs in CS5.5 that I have. How do I fix this?
'''Except 8.0.x version also supported version is 3.6.24 '''you can find it here:
http://www.mozilla.org/en-US/firefox/all-older.html
check the system requirements:
http://www.mozilla.org/en-US/firefox/3.6.24/system-requirements/
see also:
[https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox Installing a previous version of Firefox]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.
Maybe you are looking for
-
I want to get record by record number using cursor. I use btree, which is configured to support recno (pdb->set_flags(DB_RECNUM); I found how to get recno by record and it work: unsigned int Recno() db_recno_t recno; Dbt numValue; memset(&numVa
-
Logging JDBC Statements in Weblogic 8.1
Hi, I am using Weblogic 8.1.I want to see the JDBC logs and right now I am getting "Oracle Jdbc tracing is not avaliable in a non-debug zip/jar file" error. Can any one help me with how to turn the JDBC Logging on? I am facing a wierd situation that
-
My camera ***** after upgrating to ios 7.0.2. It turns black with the back camera.does anyone experienced this?
-
Ld.so.1: rman: fatal: relocation error:
I am facing the below error while executing rman rman target /ld.so.1: rman: fatal: relocation error: file /u01/home/oracle/product/10.2.0.4.0/bin/rman: symbol kgskactlat_a_: referenced symbol not found Killed I tried to unset LD_LIBRARY_PATH and res
-
JSP TagLibrary...
Hi Everyone, I have a doubt in how lifecycle of taglib works... public abstract void setPageContext(javax.servlet.jsp.PageContext); public abstract void setParent(javax.servlet.jsp.tagext.Tag); public abstract javax.servlet.jsp.tagext.Tag getParent()