Burning a DVD after the update
Trying to burn a DVD after the update. Selecting DVD as the destination. But no matter whether I select "automatic" or "single layer" the software keeps requesting dual-layer media. I really don't want to do that. Any solutions other than Compressor?
Having to finish the project... I exported using Compressor and everything worked fine. But I still can't for the life of me figure out why FCP X in the DVD destination continues to demand dual media....
Similar Messages
-
After downloading the new Itunes update, my compter now shows error: "The program can't start because MSVCR80.dll is missing from your computer". I follwed the Apple fix / steps but it did not correct it. Also, after the update my disk drive is not recognized on my computer. If I load a CD, I cannot even access it.
See also Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes (similar to the advice above) and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies. E.g. TS2308: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Why do I have 2 versions of the program pages on my mac after the update?
Why do I have 2 versions of the program pages on my mac after the update?
Do you have both the old and the new version? If so, you must have purchased Pages via the retail DVD (iWork) - the installer does not update in this case, but installs a brand new version separately giving you the choice of which one you want to use.
-
Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options. I was able to select the account under "parental controls", but again, could not delete it. Why Apple? Why?!!????
SOLVED Ok. I actually was able to disable it. I had to actually log in as the guest user to make it accessible in the preference window. Then I disabled it and logged out. Apologies if this was obvious for some people, but I have had some sort of issue with something every update since Snow Leopard.
-
Dear Apple Support,
Good day to you.
This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1..
After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to restore. So i connect it to itunes and wait to restore my ipad mini because it is not opening.
After restoring it my ipad is now opening and it is like new that i need to set up again.
I set up again until i reach the apple id and password.
I put my below apple ID and password to unlock my ipad but it didn't work. The message i receive is "the apple ID cannot be used to unlock this Ipad.
What will I do? Please help.
Thank you
Sent from my iPhone
Begin forwarded message:
From: Apple <[email protected]***>
Date: October 9, 2013 at 11:53:53 PM GMT+4
To: ****
Subject: Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini
Dear Leslie J.,
Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini named “Leslie Joye's iPad”.
If you have not recently set up an iPad with your Apple ID, then you should change your Apple ID password. Learn more.
Apple Support
<Email Edited By Host>1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
Is your iPad working? -
So I updated my iPhone 5s to version 7.0.6 yesterday, and now my iPhone music isn't working properly. It won't sync the playlists that I added after the update though when it's plugged in on iTunes it says that the music is synced. When I select a song in a playlist on the phone it shuffles through the playlists for like 3 seconds and picks a totally different song to play. I tried reinstalling iTunes, I tried restoring the iPhone, is it just a bug with the update? Nothing works. Any solutions are welcome.
DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....
-
After the update of my 13 in mac book pro (early to mid 2011) , it freezes every 30 seconds with the spinning wheel and now it just freezes. Ive never had this problem until I recently updated. Also, I just checked now for available update ( which there was one), the update would process till the last step and it shows it cannot be expanded? Now my computer wont even restart (just have a grey screen with a cursor). Can someone please tell me what the heck is going on with my computer?
I also checked the memory and it showed available memory was over 1.5 GB. I dont have any programms installed and do not have backup yet ( dont really need it anyways)
Problems: first with spinning wheel every 30 seconds and now whole computer just freezes when I restart, it only shows grey screen after the starting sound or it takes about 8 to 10 minutes to restart.
This ALL happened right after the update with google chrome crashing. I know my apple care plan expired so I cant even go to genius bar. Do you guys know how much it would cost to get it fixed ? Or any recommendations I can do to fix this?Try a smc reset:
http://support.apple.com/kb/HT3964 -
My phone was recently updated to 8.1. After the update, when text messages are sent when my phone is turned off, they no longer appear when I turn the phone on. Is there something in Settings that needs to be changed?
MetsFanGirl,
Thanks for verifying. Are you having issues receiving both iMessages and standard text messages when they are sent when the phone is turned off? Try this and test... http://vz.to/1qjiOs7
LindseyT_VZW
Follow us on Twitter @VZWSupport -
My iPod touch 5th Gen iOS 8.1 won't turn on, charge and CONNECT TO iTUNES.
Maybe this is because of the new release ios 8.1 where after the update it went
recovery mode then i didn't restore, i set up a new ipod.
What's wrong? Is ths bcoz of ios 8.1?How do you do that
lllaass wrote:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
After the update I am unable to log in to get iMessages. It says "Could not sign in. Please check your network connection and try again". My phone is connected to Wi-fi. What should I do?
Hi andrea110,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
The settings are the same for iOS 7:
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755?viewlocale=en_US
Cheers,
- Judy -
After the update to Android 5.0.1 on my Galaxy Note 4, my Galaxy Gear S will not install apps, I get an error message that says "Installation Failed. Try Later. (WO:WO:-1002). I am glad it was a free app I was trying to install (I tried a couple of different ones to see if it was just a bad app and they all failed on the install. The Note 4 and the Gear S seem to be communicating okay via bluetooth (health stuff syncs, Gear S controls the music player on the note 4 Etc. )
Everything that I had installed previously on the gear S still works.
Everthing while in the gear manager seems to be working okay also. I can make changes in the Gear manager on the note 4 and they show up on the gear S. I have an app called watch styler , it let me create a new watch on the Note 4 and that showed up on the Gear S.
The only thing that seems to be not working is installing new apps.
When trying to get a new app it looks like it is working as normal , the dowload shows it is working but it errors out when it goes to install it.
REPLY SEPARATOR *********** -
i have an Iphone 4 16gb and updated the IOS 6.1.2. after the update my 3G is not working at all??. can you please suggest what can be done to rectify this problem?
I have the same problem. After updating to 6.1.2 my iPad 3,2 will not find Verizon network. It just says "Searching..." for ever. Any thoughts?
-
The gyro no longer works when using the remote app on my iPad. I updated to iOS 7.0.1.
This seem to happen after the update. Any suggestions?Dear Apple friends,
I have the exact same problem with some apps.
Even when I try some websites in Safari and Chrome that require loading big chunks of data they crash.
Today it crashed in two new places. In the notification center and when I opened newstand app I no longer was able to return to the main window and the dock disappeared.
I have my ipad retina for about three months now but latelly this issue has became more frequent. What should I do?
Should I update to the latest firmware and do what raymond73 said?
Is there a fix for this issue?
Has Apple said anything about this? Because I see that this issue is happening to a lot of people.
Is it possible to downgrade to iOS 6?
Is it a firmware problem? That can be fixed in future releases? Or an hardware issue?
Should I wait or go to the place I bought it and try to get the money back? -
We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?
Zap the PRAM and Reset the SMC, then try again.
-
My facetime on iphone 4 is not working after the update to IOS7
Hi guys, can you help me about my problem? My Facetime on Iphone 4 is not working after The update to IOS7 Thanks xxx
Hey Junie1387,
Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/TS3367
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
You may also want to reset your network settings:
Settings > General > Reset > Reset Network Settings.
Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
Thanks,
Matt M.
Maybe you are looking for
-
Eyedropper Tool Not Working Properly: Photoshop CC 2014
I have the very latest version of Photoshop CC 2014. But, even before updating, all of a sudden, my eyedropper tool isn't working properly. It used to be that I could pick up a color from any place on the image, no matter what layer I was on. Now, it
-
Fill the Screen Fields XD01 Automatically ffrom Program call
Hello, I have a requirment where i have to pass the screen values for the genral view of the tcode XD01/XD02, For example : In my report program i get the Name, City, Country, PIN etc.. now my requirement is that the First Screen(Genral view) of th
-
Mail arrives in box erratically. Sometimes it can be picked up using another computer (windows) on the same network but is unavailable on this iMac. Formatting incomplete and not complete. Mail disappears from box -- I did not delete. A message sayin
-
We have Set up a Test single server with upgraded SQL 2008 and have loaded BPC 7.0 Sp05 on the server. We are now trying to Restore the AppSet but it fails in Step 3 After it completes the first thre substeps of Webfolder, FileDB, SQL Database, the
-
How to get micro sd card to work
how to get micro sd card to work.. my phone says total space 7.40GB for sSD card and that's whats available. I put a micro SD card in but no change?