Burning a DVD - keep getting encoding errors message, help?
I have a video that I made out of videos, photos, and music that is less than an hour in length. I selected highest quality b/c it was less than the available 4.7 GB of available space. It took over a day to burn and at the very end it gave me a message saying that it was having encoding errors. Help! I am trying to burn it again at reduced quality, but prefer to have it at highest quality.
Thanks,
savageclan7
savageclan7
Let us get the details into perspective and then we will advance from there.
What version of Premiere Elements are you using and on what computer operating system is it running?
What are the properties of the video that went on that Timeline....video compression, audio compression, frame size, frame rate, interlaced or progressive, file extension, pixel aspect ratio....photos - how many and what pixel dimensions??
Based on the properties of your source media, what did you or the project select as the project preset?
When you go to the burn dialog for your burn to DVD, what did the quality area of the burn dialog show for Space Required and Bitrate (with a check mark next to "Fit Content to Available Space"? The only time I would work without the check mark there is if I was getting Data Rate Error message and I had to set the Bitrate manually to move forward.
What is the exact wording of the message(s) that you are getting once you hit Burn in the burn dialog?
Let us start here and then we can decide what next.
If you need clarification on anything written, please do not hesitate to ask for that clarification.
Thank you.
ATR
Similar Messages
-
I can't open the iTunes store and keep getting this error message. "Registry settings used by the iT drivers for importing & burning CDs & DVDs are missing. Reinstall iTunes." I've reinstalled iT a half dozen times with no results.
You might have two different things going on at once here.
Starting with the registry settings message.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
I have uninstalled and reinstalled iTunes several times, but keep getting an error message that "the registry settings for importing and burning CD's and DVD's is missing". Can anyone help with this?
It keeps telling me to reinstall iTunes, but it continues to come back with the same error message.
-
How can I burn a small movie file to a dvd that will play on a dvd player? I keep getting an error message "wrong type of disc" on my player. My burner is built in to my monitor. Will I have to buy software such as Toast to burn with?
I'm using the burner utility that came with the computer. The video is on I took with my small camera. I'm using a DVD-r disc and I drag the file to the disc icon then hit burn and everything seems ok. I can remove the disc and put it back in and see the file but if I put it in a DVD player it won't play, just get error message.
-
I'm trying to burn a playlist to a blank CD-R disc at a low speed (12x) and I keep getting the error message "2131." Any idea what this means?
It's usually related to old firmware on your CD/DVD drive, but we'd better have a look at your DVD/CD tests first, just to be sure.
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here. -
I updated my itunes this morning, and now I keep getting an error message when trying to burn a disc. Any ideas how to resolve this?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I keep getting this error message when I (right-click) on a photo file on my desktop to burn to a CD. I don't understand this code...does anyone? Thanks Ariel**: The disc can’t be burned because an unexpected error occurred (error code 0x80020000).
I tried every obvious solution to this problem with different types of disc (-R; +R; -RW and +RW) and the problem persisted. Then I read about removing a hyphen in picture filenames. I renamed all the images and bingo there were no further problems. Apple should have solved this by now. This error code has been reported for several years and my MacBook Pro is quite new. Anyway, I hope this helps. It does work.
Piggywiggle -
I burned photos to a CD-R and the CD-R automatically ejected. The photos are now on the CD-R. Now I keep getting an error message that says to complete the burn before I can quit iPhoto. I can not shut down the computer until iphoto shuts down.
Hit Command + Option + esc on your keyboard and force quit iPhoto. I'm sure it just got stuck talking to your optical drive.
Hope it helped -
What does it mean when you can't burn a CD because you keep getting the error message with -3?
I have gone through a dozen CDs, trying to burn a playlist, and keep getting the error message that the burn is cancelled due to -3......
Is this due to a problem with the CD burner or with a bad batch of CDs?It may be a DNS issue. Where you would normally type "flylady.net"... just enter 208.87.85.216 instead. This is the actual address for the site. When you enter a website by name, it gets the actual address from a DNS server. There are tons of DNS servers out there and others who are getting to the site may use a different one. Just enter the numbers as shown (no "HTTP:", etc... just the numbers) and see if it works.
-
I just recovered my Itunes which disappeared for whatever reason. Support was able to give it back to me. It was also updated. I now cannot burn a CD without getting an error message. Somebody please tell me what I need to do. I never had this problem before I lost my purchases and updated.
I take it you have Acrobat Reader installed? If the booklet itself is corrupt you'll need to contact the iTunes store support team through the report a problem links in your account history. As far as I'm aware these can't normally be redownloaded so you will need to ask for an exception.
tt2 -
My hard drive fried and had to be replaced. I'm trying to install CS4 from my original discs but keep getting this error message - "One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly". A customer service rep gave me a link to download off the Adobe site, but when I try to open the file to run it, I get this error message - "A problem occurred extracting the archive".
Can anyone help?Yep. Nothing happens at all. Windows tries to execute the uninstaller, but I don't get any other screen and all activity stops for the MSI. I monitored it in Process Monitor and the MSI executable appears, but is quickly ended, like it couldn't find anything or something.
It's as if windows has a blank entry in Programs and Features, because it used to show the size of the Adobe application in the "Size" column. Now it's just blank. Link to screenshot below:
http://img829.imageshack.us/img829/5006/screenshotcaf.jpg
Note the install date. That's when I was able to successfully reinstall it. Now I can't even do that. I should also mention I tried Revo Uninstaller. It deleted one small registry key, but nothing changed.
By the way, is the CS cleaner supposed to ask for a disc in the drive when you run it? It refused to run unless I had one in it, so I used my install dvd. -
When burning a bluray I get this error message: Total bitrate is too high near time = 4.760000
The video is encoded with sonic cinevison as avchd file and one AC3 file.What can I do to avoid it?
Well, about the only thing you can do to solve "bitrate too high" errors is to lower the bitrate. -
TS1717 Can't burn cd's keep getting "unknown error" 2131 how can it be fixed?
Can't burn cd's keep getting "unknown error" 2131 how can it be fixed?
The 2131 is usually a firmware issue, but we'd better doublecheck.
Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here. (Use your Ctrl-V keyboard shortcut to paste.) -
In iCal - I keep getting the error message “ This calendar was created by Mail” and it will not accept any input; why..??
use Disk Utility and Verify Permisions then fix and Verify Disk and fix, this should fix it.
-
I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung. Thanks
sandyzotz wrote:
Other wise, I probably best return for a refund and get a Samsung.
Unlikely. Based on the complete lack of detail of the issue provided it is entirely possible the same issue would occur.
Unless and until the user provides some actual details of the problem, there is nothing the indicate that the issue is with the iPhone.
Maybe you are looking for
-
REP-0118 Unable to create a temporary file in "Windows 7 "
We are using Report Builder Version 6.0.8.24.0 and Windows7 32 bit operating system, here While Running a Report through form i am getting this below error. REP-0118 Unable to create a temporary file* But while running the same report in a windows 98
-
Creating a Function Module for Standard Include
Hi ALL, There is a standard Include in that i have created 1implicit Enhancement Point and there is 200 lines code is there ,so my client is saying to keep this code in function module. This is the below code can any one do how to write this code in
-
I am having problems with my time capsule and WiFi. I had previously set it up and everything was a-ok. Recently we had to move out of the house while there waswork being done on the floors. My guess is everything was unplugged and re-plugged. Now th
-
Validation Errors on TabPanel - How do I show them to user?
I have a tabbed panel on one of my JSF pages with required=true validation on field on tabs other than the first tab. When the user does not fill in those required fields on tabs other than the first one, those field level error messages are not show
-
Which Windows OS should I chose to run Autocad/Revit?
I purchased a Mac Book Pro for my son in college (OS 10.5). He needs to run Autocad & Revit for his classes. We've decided to use boot camp instead of parallels or other options. My question is how do we know which windows OS to chose? I've heard Vis