Burning a DVDSP2 project  with disc copy?

I tried burning a DVD (1-4X media) using disc copy (Jag 10.2.8) at 1x but it burned at 4X. I used img created from DVDSP2. Is the img file DVDSP2 created locked in to only burn at the max. speed based on media-burner speeds-the same as burning directly from DVDSP2? Is there a way to burn a DVDSP2 project at 1X using disc copy or do I need Toast?
Thanks
Della

Silal:
size is 4.02 G DVD5 disc. I have a 1-3 duplicator with Pioneer DVR-111 drives and even when I set burn speed to 1X & burn from the harddrive (DVDSP2 project), with new
1-8X Taiyo Yuden media, it will burn at 4X speed. The seller told me some Pioneer drives will burn at a minimum of 4X when using new high speed media?, which I guess is what the Taiyo Yuden 1-8X media I have is? Is he correct about this? I assumed if DVD media is 1-8X then 1X burn should be possible regardless of the drive type? When I burn older 1-4X dvd media, the duplicator via harddrive (loaded with DVDSP2 project from a disk copy-burned DVD) will burn a DVDSP2 project DVD at 1X. But when I burn this same 1-4X media in my G4 MDD-pioneer 105 burner-burning a DVDSP2 project (using disk copy- img file) it burns at 4X, even though I set it to burn at 1X?
So am I correct in assuming this has to do with the img file being created in DVDSP2, even though the DVD is burned using disk copy?
Della

Similar Messages

  • When i burned my rendered project with Nero on DVD, the movie suddenly contains a kind of stroboscoop effect

    When i burned my rendered project with Nero on DVD, the movie suddenly contains a kind of stroboscoop effect?? How is this possible?..Playing my project on the pc is not a problem, only when it's burned it suddenly has this kind of stroboscoop effect.
    I hope somebody can help me.
    Best Regards,
    Pascal Theune.

    When you play the DVD on your computer, do you see jumpiness?

  • How do I burn a iDVD project on more than one computer?

    I created an iDVD (7.1.2) project with three elements. Two iMovies made from iMovie '11 and a presentation made from Keynote (5.1.1).
    I deleted the chapters in the slide show to help simplify matters and it did cut down on my burning/processing time.
    I made this iDVD project for my son's 5th grade graduation. We would like to burn 135 copies to give each family one 'favor/dvd' for memory keepsake.
    I do not want to burn 135 copies on my Superdrive (new to owning a mac) and do not want to ruin my Superdrive for a school project.
    I can not take this to a commericial duplicater because of copyright issues with the music. We are not selling the copies, just giving a memory keepsake to the kids- of the year and the slide show from graduation, the other iMovie in iDVD, just contains one page of specifications; like my contact info and songs used etc..
    I have parents that are willing to help me copy the movie, however I don't know how to do this?
    I don't believe any of these parents have iDVD.
    Someone mentioned through all my readings on apple communities and google, making an "ISO" of your project then anyone can make a copy of your movie on any platform: PC or Mac. What is an ISO? How do I make a ISO?
    If I have a .img file from saving a disc image - would I burn the .img file to a dvd and give it to someone else to copy? Are there other files that need to go with my .img file?
    If/When someone takes my .img file and puts it on their computer how do they copy it? Do they need burning software?
    Can I just give a friend a burned DVD of my movie to burn copies on their computer?
    What I tried: Bought a LaCie burner to use a external drive vs. my (Superdrive - worried about overuse). Saved project as a "Disc Image." Mounted to my Finder and then burned to external drive with disc utility. This worked successfully 4 times in a row then kept getting message "unsuccessful burn" I took the drive back to Fry's. Not sure if it was the drive?
    Any advice to a newcomer would be great!
    Summer has already begun and I would like to finish this project as soon as I can.
    Thanks so much, Deanna

    Yes, you can distribute a burned disk of the project to those who can create duplicate disks.  Or create a disk image of the iDVD project using the File ➙ Save as Disk Image menu option.
    Then you can distribute the disk image to those who will burn the disks.  For PCs you'll have to convert the .dmg file to a .iso file so they can burn it.  This website describer how: Mac Help - Convert and Burn Mac .dmg or .img to .iso Windows PC-Compatible Disk Image
    Suggest to them to burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    It would be prudent to rest your optical drive for about 30 minutes after burning 3 disks in a row. That will give the laser time to cool down before you start another batch.
    OT

  • Burning a 2h30min project without a dual layer superdrive

    I have a dual layer Lacie external dual layer DVD writer, I recently purchased iLife because I was told that you can burn dual layer projects with iDVD 5.
    Obviously, as I have found out, you can only do this with a dual layer internal superdrive.
    I have tried the patch to make iDVD burn larger projects(from the French site Hardmac) and it didn't work for me, also tried to save as disc image but to no avail.
    Is there anyway to get my project onto a dual layer DVD without shortening it, would be good if iDVD gave you the option to split the project over 2 discs.

    Hello, Robert!
    Have a look at this. A rep from LaCie posted to it: http://discussions.info.apple.com/webx?128@@.68b9ba73
    Be sure to read all the posts for some info that should help you.
    Good Luck!

  • How do I burn an iMovie project to disk?

    Plze can someone tell me how i go about burning my imovie project to disc?
    Im lost,I just dont no how to get it done,THANKU

    Hi
    AND
    If You want quality - then iMovie'08 or 09 or 11 are not the tool of choise when doing a DVD
    due to that they discard every second line resulting in less sharpness - low quality.
    Tools to use are
    • iMovie up to HD6 - or -
    • FinalCut
    iDVD does SD-DVD standard - there are no HD in DVD-standard ! at all.
    I do
    • use Verbatim DVD-R
    • set down burn speed to x4 (or x1)
    • secure a minimum of 25Gb on Start-up hard disk to let iDVD and Mac OS run OK
    other thing that are relevant to quality is
    • video file type - some are worse than others
    • audio file types - I only use .aiff 16-bit 49kHz or from Audio-CD 44.1kHz (NO .mp3)
    • photos - .jpgs (NO .bmp - they go red)
    Yours Bengt W

  • Everytime I try to burn an iMovie project to a DVD with iDVD, the disc is ejected during the Burning and Multiplexing phase before it's completed.

    For months I have been unable to burn any iMovie project to a DVD using iDVD.  During the Burning and Multiplexing phase the disc is ejected before it's complete.  I went the Genius Bar and after many tests I was told that my disc drive was pretty much dead.  The person that helped recommended that I buy an external DVD burner from amazon.  I bought the new drive and I can now burn files, but I'm still encountering the same issue burning a movie.  Does anyone have any idea what'g going on?  I'm extremely frustrated at this point!

    Read this treatise on Multiplexing by  Bengt Wärleby: HT1645 I was burning a DVD and the...: Apple Support Communities.
    Follow this workflow to help ensure the best quality final product:
    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • Unable to burn with Disc Utility

    I have a mac mini superdrive and I want to burn some idvd projects on DVDs that we made with students last year. I started burning one and it went fine until the end. Now I am trying to burn another project that is much bigger than the first one. It works fine until almost the end and then I get the error:"Unable to burn...The device failed to respond properly unable to recover or retry".
    I am using the same blank dvds as for the first project and last year I did burn this project on the same computer. What can I do?
    Thank you for your help.

    *A few suggestions:*
    Repairing permissions & then restarting your computer usually cures "burning" hiccups. Should be done after each burning session.
    Another help source (if you haven't already done so).
    Go to your OS Help Menu. In the search field type dvd
    Click on all the troubleshooting topics & Support Articles that pertain to your issue.
    You can also do the same in Disk Utility. Open same up.
    At the bottom left of the window, click on the purple button w/the "?" in the middle.
    This will bring up the Help Menu.
    ===============
    Try a different brand. Top forum favorites
    CDs
    FUJI
    TDK
    Verbatim Strongly recommended by users.
    DVDs
    Maxell
    Make sure the DVDs are not dirty, smudged and/or scratched.
    http://docs.info.apple.com/article.html?artnum=50448 How to Handle and Clean CD and DVD Discs
    Your drive may need cleaning. Cleaning kits can be purchased from any store that sells CD/DVDs.
    Check out the following KB Articles: http://support.apple.com/kb/TS2288 Troubleshooting a CD-ROM or DVD-ROM Disc That Does Not Appear on the Desktop
    http://support.apple.com/kb/HT2801 Apple Portables: Troubleshooting the slot load optical disc drive

  • Burning a Final cut Pro X Project with DVD Studio Pro

    Hi,
    A project edited in Final Cut Pro X and Compressed with Compressor 4, can you then burn to disc with DVD Studio Pro?
    I have DVD Studio Pro on my system but when I burn the project to disc using DVD Studio Pro it crashes all the time.
    I'm wondering if DVD Studio Pro is not compatable with a 64 bit system?
    Advise is appreacated.
    Barry

    Thanks Tony that did it, I was using Burn but when I went to Build/Format the disc burned as it should, thanks
    Barry

  • Want to burn project to disc but can't

    I am trying to save some video clips in imovie for a back up and have just 29:30:25 duration total. But when I click on "burn project to disc" I get a message that (The project won't currently fit onto a disc. But if you empty iMovie HD’s Trash, it may.)
    Well the trash is empty everywhere as far as I can tell and the message doesn't change. The disc I want to use is a dvd-r has 120 min and 4.7 gb. HELP?

    I am trying to save some video clips…
    for convenience, get in any PCshop a firewire-connected harddrive…
    launch Disk Utility (in your apps folder), format drive to MacOsExtended/hfs…
    then copy your project within minutes by simply drag'n drop from one drive to another…
    (I have 4 hds just for my little homemovies... )

  • I can't burn a playlist to a disc, it comes up with no supported disc burners found, any ideas, i can't burn a playlist to a disc, it comes up with no supported disc burners found, any ideas

    i can't burn a playlist to a disc from itunes, it comes up with no supported disc burners found, any ideas?

    Additional information: 
    -also ran "Repair" with new download of iTunes
    -am using the same spindle of CDs that worked perfectly a month ago.  Tried another brand also to be safe.  None worked.
    -ran CD/DVD diagnostics within iTunes with Apple Care - no issues apparent
    -also tried write-speed 20X on advice of Apple Care (don't know why they thought 20X would be the magic number after the other 3 I tried didn't work)
    -tried running itunes in another user account on the computer - same problem, same error code
    -Apple suggested it was a copyright issue.  I can't even burn music that I created/recorded myself, so that doesn't make sense.
    -They thought maybe Quicktime wasn't installed properly, so we checked a film in Windows Media - it played, meaning Quicktime was fine apparently. 
    Solution:
    Unclicked CD text option & Sound Check, ran burn from the File drop down menu (max speed) on a Philips CD-R and it worked!  Had been right clicking the playlist name and selecting Burn option from there.  That being said, it did not work on 2 other brands prior, with same settings.  Not sure why.  Just happy it's working again. Is it a brand issue?

  • In P6 version7 not able to copy project with the baseline.

    Hi,
    In P6 version 7 it is not able to copy project with the baseline. It copies only the schedule.
    Please help.
    regards,
    Baber.

    Tried the solution from another thread but did not work completely (as warned) - the workaround didn't quite work for me either:
    https://discussions.apple.com/thread/1398462?start=0&tstart=0
    Ended up taking a backup, did a fresh install, created the account as the first one so that it gets the same UID as the other Mac (on which my account was the first) and restored my data - was painful but finally on track.

  • I have created a slide show with music but when i view it or attempt to burn to a CD or even copy to hard drive after about 15 sec the program stops working and it shuts down

    Elements 10 was deactivated on desktop and installed on new laptop.  Have on
    y used it for photo editing until yesterday. Created a slide show with music but every time I try to burn to cd or move it to hard drive after about 15 sec, it says windows has encountered a problem with this program and must shut down.
    I Also can't sign in to adobe with the program. It simply spins and I had to force close the program.
    help!?

    I am using photoshop Elements 10 under the create tab...slide show.
    Used it on my desktop several times. Deactivated it and installed on new lap top about 5 months ago.  Had not used it other than for photo editing until today.
    I can also not login in thru the program. It simply spins and I finally had to force close the program
    Toni V. Sloan
    Sent from my iPad
    On Jun 27, 2014, at 7:03 PM, Chris Cox <[email protected]>
    I have created a slide show with music but when i view it or attempt to burn to a CD or even copy to hard drive after about 15 sec the program stops working and it shuts down
    created by Chris Cox in Photoshop General Discussion - View the full discussion
    Photoshop doesn't do slideshows… What software are you using?
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6504356#6504356
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop General Discussion by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Burn multiple imovie projects to one dvd with menu

    How do i burn multiple Imovie projects to one dvd with roxio toast 10? Can i add all of the projects or do i need to export them as a quicktime movie first or something?

    You can share the first movie from iMovie, but all the others will need to be exported from iMovie as movies and dragged into the iMovie project.

  • Burning iDVD projects with external LaCie burner

    I recently purchased a LaCie DL d2 DVD RW with LightScribe 16x from LaCie (12/07/2007). The primary reason for my purchase was that I wished to create/burn iDVD projects on my iMac computer. The reason that I needed this product was due to the fact that, when I purchased my iMac, I made an error and ordered the iMac with a combo rather than SuperDrive. So, while I am able to create iDVD projects and iMovies, I am unable to burn DVDs with my project.
    Thus far, however, I have not been able to burn a DVD with any of my products. When I attempt a “burn” the Creating your DVD menu appears and when I put in a blank DVD+RW 4x 4/7GB, it goes through the process (Prepare,,, Process Menus... Process Slideshows... Process Movies and Burn procedures). The DVD is then ejected and a message says its done and is “cleaning up.” However, that message never leaves the screen and when I click on the “Cancel” button, nothing happens. The iDVD application seems to lock up and I have to do a “force quit.”
    I have tried this with three different project, all with the same result. When I place the supposed “burn” DVD in the Combo Drive, it spins for a while and kicks the DVD out.
    I have also tried launching Toast Titanium (software that came with the LaCie burner). However, I see no place where I can “drag & drop” a iDVD product to the “drop zone.’
    Can you help me out. Should I be able to burn iDVD projects with this unit? If so, what am I doing wrong.
    Thanks for any help that you can provide.
    Jeff White

    "Should I be able to burn iDVD projects with _*this unit?*_"
    Which "model" & "generation" G5 iMac do you have?
    Need this info so that the knowledgeable users can provide you with the proper troubleshooting solution(s).
    http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh355.html Getting information about your computer
    You can have this info displayed on the bottom of every post by going to 'My Settings' which is located in the column on the right under your name, and filling in the information asked for.
    Thank you
    Have you contacted LaCie Support?

  • IDVD project with Win DVD burner???

    I was wondering If I can do a project with iDVD then send it to a Win comp to have it burn onto DVD. I have a Mac mini without the DVD burner.

    Hi Chris,
    See the other thread with the same question: http://discussions.info.apple.com/webx?128@@.68baeb53

Maybe you are looking for