Burning a project issued from eyeTV archive

After exportation to iDVD and trying to burn, I have a warning : "errors during project validation, you must solve before burning. At this step, I cannot find any solution ????
thks

Likewise. I agree iDvd isn't a practical general burn utility. It simply was never written as such. Even though it can be done with iDvd, it really isn't intended for burning recorded TV programs; which is what EyeTV is written and designed to do.
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.

Similar Messages

  • After Effects CS4 project issues from English to French

    Hi All,
    So to give a quick summary of what our issue is, when a french AE designer (Using French AE) opened the project we had created in the UK (on English AE) he was getting errors mentioning that the xyz position preset was unavailable.  After spending a lot of time on the support line to Adobe they told me that the issue is basically that the x, y, z position preset which is part of the animation we created apparently DOES NOT translate across from English language After Effects over to French language After Effects (not entirely sure why, might be that this is code based and that the French code and English codes aren't the same).  Adobes only suggestion was for the french people to download a trial of the English language version of After Effects CS5 and make the amends and export using that.
    Now being a stubborn so and so, I wondered what might be the cause, I'm guessing that the expression code is language specific, which led me to wonder whther it could literally be translated?  So in english the expression is:
    value + [effect("Separate XYZ Position")("X Position"), effect("Separate XYZ Position")("Y Position"), effect("Separate XYZ Position")("Z Position")]
    Does anyone have French AE installed that could give us a clue to what the equivelent french expressions would be?
    Many thanks
    Mike

    You should not need to take care of anything else. The internal references, functions and variable names are always English. Only the UI-centric stuff will change, that is the effect name and its control parameter, i.e. ("Slider") will become ("Curseur") in French. You could also avoid this by simply using the control index value instead of the control parameter, so ("Slider") would simply be (1), as it's the only control element. now that I think of it, just yesterday I saw an internationalizer script at AEScripts com that might be of use to you, too. If you have something odd, simply post the code and I'll have a look (or our resident Frenchmen here on this forum, Sébastien Perrier) .
    Mylenium

  • I can't burn a project from iMovie to a dvd why?

    my mac didn't have idvd untill i instaled it but when i try to burn a project from imovie, the dvd doesn't work on any other computer what can i do?

    What are you using to burn the movie to DVD? If you are using Finder, it will not work on other DVD players (not sure about other computers). In order to work anywhere, you need a dedicated video burn/authoring application such as iDVD, Roxio Toast, Burn, or many others you find by googling.
    Oops - I missed the fact that you said you installed iDVD? So did you use that or Finder?

  • How to extract iMovie files from an archived iDVD project

    Hi,
    After archiving an iDVD project which contained several individual iMovies to my back up hard disk I deleted all of the individual files on my internal HD to free some space.
    Query: Is it possible to extract an individual iMovie file from the archived project for future editing revealing all of the transitions, audio tracks, etc back in iMovie ?
    I have used 'show package contents' and can see the individual movies as Quick Time files but when I load these into iMovie all I get is the whole movie as one single clip.
    I suspect the answer is once it's archived I cannot retrieve the iMovie files ?
    Any help appreciated. Many thanks.
    iMac G5 20" 2.0GHz 1Gb RAM   Mac OS X (10.4.4)   eMac 1GHz 512Mb RAM

    ...I ..can see the individual movies as Quick Time files but when I load these into iMovie all I get is the whole movie as one single clip. I suspect the answer is once it's archived I cannot retrieve the iMovie files ?
    that is correct: hitting "export" or share in iM creates a single movie(file); what you have in mind is the imovie project (e.g. where you can change titles, transitions etc)... to make this accessible you need to backup that iM folder/package (the one with a star)... these files are for sure much bigger = containing more data...

  • Inter company STO issuing from Project Stock

    Hello Experts,
    In my Scenario, I have two plants A & B which are in two different company codes
    Plant A raises an STO to receive materials from Plant B.
    Plant A will receive the materials into unrestricted use stock, but Plant B should issue from valuated project stock (via outbound delivery).
    This is necessary to keep accurate cost tracking.  If Plant B moved the project stock to unrestricted stock first, then the moving average price could be affected before transferring to plant A.
    Can anyone tell me if this is possible?  I don't see stock type Q available for movement 643.
    Does anyone have any other options to for intercompany transfer of project stock?
    Regards,
    Thomas

    I opened a message with OSS and below is the response.  Basically it cannot be done with the standard system.  There is a note on how to modify your system, but it is only for a certain releases and would be considered a core mod.
    "Dear customer,
    Thank you very much for contacting SAP Global Support Center.
    unfortunately the functionality you expect does not exist within the
    standard SAP design.
    note 92231 deal with a modification suggestion how to create such
    movement types in some releases. As this is a modification note
    originally proposed for special customers, there is no general
    modification for all releases. As the tables has changed
    in 46B, the modifications to create 643Q proposed by SAP via the
    corresponding notes are not made for your release. We do as well not
    plan to provide a new modification note at the moment.
    The creation of the movement type is therefore possible but is
    considered a modification to the system design."
    I am sorry that I could not provide you with a more positive answer
    this time but nevertheless can provide an accurate information. For
    more information, please refer to note 11 and 83020.
    Please notice that the reason for your request does not indicate any
    possible errors in the SAP Software. Nevertheless we have at our
    discretion decided to process your request within the framework of our
    support. Please note that you are not entitled to free consultation in
    similar future cases. In this case check the "The SAP Eco-System
    in a nutshell" that explains how to find help to overcome this issue.
    The document can be found at:
    http://service.sap.com/~sapdownload/011000358700006245642006E/
    Note 1054121.
    I am sorry but this is the standard system design. Please confirm your
    message at your earliest convenience.
    In the end, my client has decided to transfer the project stock to unrestricted stock before doing the STO.  Please be aware that this could affect moving average price before doing the transfer.

  • Can't archive SD card shot with Sony RX10 in FCPX 10.1.0. Card from EX1r archives without issue.

    I can't archive an SD card shot with Sony RX10 in FCPX 10.1.0. Card from EX1r archives without issue.  Anyone have a solution?
    Thank you.

    Hey Tom.
    The RX10 shoots, after the ver. 2.00 firmware upgrade, XAVC S 50MB footage.  I can import the mp4 footage from the card via MP4Root folder and I can drag it off the card to a hard rive and import from there as well.  There was a plug-in from Sony to be able to import XAVC footage (PD2K-LT2.dmg) that I installed to get FCPX to recognize the footage.  The language in the plug-in, however, seems to only discuss XDCAM, which I was able to do with the EX1R several FCPX versions ago. That being said, import works so I'm mostly there. The archive is such a great feature, it would be nice to be able to use it for this camera. 

  • Tried burning photos to DVD from iphoto - error message

    Burned several hundred photos without any issues, but now have tried unsuccessfully to do the last 300 photos - each time I enter a disc and hit burn, I get an error message: "The burn to the MATSHITA DVD-R UJ-898 drive failed. The disc drive didn’t respond properly and can’t recover or retry". Tried burning them in smaller groups of albums and having no luck. Also tried rebooting.
    Using iPhoto 8.1.2.
    Any suggestions?

    I ran into this exact issue, trying to archive some iPhone videos from my iPhoto Library. Even though iPhoto tells you how much space you have left on the disc, it must not count any additional data it has to burn onto that disc. I finally got my disc to burn by removing videos, freeing up around 500 MB from the DVD.
    This is very frustrating behavior not only because the error message says nothing about disc space, but also because iPhoto gives you a user interface for keeping an eye on how much space is left on your disc but it doesn't tell you the whole story.

  • IDVD 08 burn DVD project ERROR!?

    Trying to burn my project that i've made in iMovie HD, export it to .mov file, then opened 3 .mov files in iDVD project, added some pictures and music, played with chapter and tried to BURN DVD.
    Everything is OK when I click preview, everything is OK with ENCODING in Background=done, NTFS, 4,2,GB but only 3GB project, 16:9...all fine. Then I click *BURN DVD*:
    _There were warnings during the project validation. It is recommended that you fix these problems before burning the project._
    I click *CONTINUE BURNING*, proces menus, proces slideshows, proces movies - everything OK, *burn DVD* - *the program just shut down*.
    *What should I do?*
    I've tried burn VIDEO_TS folder - same thing.
    Now trying save as disk image...hope this works.

    http://docs.info.apple.com/article.html?artnum=302925
    1. Make sure your software is up to date - EVERYTHING IS NEW WITH COMPUTER AND UPDATED REGULARY.
    2. Make sure you have enough free space on your drive to create a DVD - I HAVE 10,74GB FREE
    3. Temporarily disable any non-Apple QuickTime plugins by removing them from /Library/QuickTime/ and ~/Library/QuickTime/ and try burning again. - http://img292.imageshack.us/my.php?image=58969981ax7.jpg TOOK A SCREEN SHOT
    4. If you are using a third-party theme in iDVD, try selecting a theme which was included with iDVD instead - USING iDVD THEME 6.0 TRAVEL THEME
    5. If the burn failure resulted in a partially burned but unreadable disc, try burning a large amount of data from the Finder or another application to a DVD to see if the issue is isolated to iDVD. For example, try burning a copy of /Library/Fonts/ to a DVD from the Finder. - I’VE BURNED MyGreatDVD.dvdproj AND EVERYTHING WAS FINE USING TOAST SO BURNING DISK IS NOT THE ISSUE
    6. If the issue is not isolated to iDVD, run Apple Hardware Test - I WILL TRY EVERYTHING ELSE BEFORE DOING THAT
    7. If the issue is isolated to iDVD, make note of what was being displayed in the burn progress dialog when the burn progress stopped. - ERROR WHEN BEEDED TO BE BURN
    8. THERE IS NO 8.
    9. If the burn fails during Multiplexing or Encoding, try deleting any existing encoded assets from your project. - I DON’T UNDERSTAND??
    10. try burning a different project to see if it has the same issue - I WILL BUT THIS IS NONSENCE FINDING NEEDLE IN THE HAY
    11. you may want to try burning the DVD to a disc image - I DID AND WAS THE SAME ERROR
    Please help...I am so close but also so far away.

  • Import from EyeTV causes severe jitter

    It's a workflow i've used successfully in the past for quite some time. Recently, though, it's been causing some very prevalent audio and video jitter, as well as frame drops/green "content missing" screens.
    Source files (EyeTV archive, .mp4 export) all play back with no problems.
    Capture is from an HD PVR (Hauppauge) which exports in a native H.264 via .mp4 format (multiple other export formats but all require re-encoding)
    I'm able to successfully walk it through iMovie to remove the jitter, but that adds a sizable chunk of unnecessarily wasted time. I'd prefer not to do my editing in iMovie due to it's over-simplification lack of features. I'm by no means an expert, I've probably only scratched the surface of FCP's abilities, but I do do small-time capturing/editing for a videogame comunity.
    Neither application has seen a recent update (in the timespan the issue has arised) nor have any of my capture/export settings.

    I've known it wasn't the greatest format for editing, basically anywhere, but it was a time and space saver (and up until recently, worked well enough)
    Like I said, i'm nothing major. I have no formal training in video capture and/or editing, nor are my products of a professional level.
    I've used MPEG Streamclip in the past, It's great, if you have the time. Unfortunately, It's adding another ~45 minutes for every 10 minutes of footage to my workflow, something I can't afford on a daily schedule.
    I'll give a transcode another shot directly out of EyeTV, but i'm not expecting any faster results.
    I've tried to optimize (both optimize and proxy) the footage on import to FCP. In some instances, it's completely corrupted the copy that FCP works with (dropping frame rate down to 2-5/second, dropping audio/video, significant distortion ETC), and other instances, it's done nothing but waste my time. (I.E. i've never had it do anything beneficial)
    Until I find an efficient workaround, I guess i'll have to stick to iMovie.
    Thanks for the help anyway, both of you!

  • IDVD burning one project on multiple macs? where are project contents?

    How do I burn one project on multiple macs? I have a idvd project I created in keynote, added music to it in Garageband, exported to quicktime, and now is in iDVD burning just fine. However I have tons of these dvd's to make, I would like to put all my mac's to work.
    last night i tried to share the file, and it is just an alias when i drag it over from the macbook it was created on to my imac. the file says it is in use and locked, since the macbook that created it is burning it. If I wanted to brun on the imac, I had to wait until the macbook was done.
    is there a way around this? What if I copied all files I used to make the idvd project to my imac or any computer i wanted to burn on? woudl it hen allow two macs to be burning the same project?
    I figured I could do this just like on my PC, drag the file over and voila...no such luck, its like if i had dragged a shortcut over to another pc...if the first one is using the file, its locked. Basically how do i get to the actual contents of the project, so I can also bring them over and hopefully it will allow me to burn on multiple macs at the same time?
    my next solution if that didn't work was to start copying dvd's using popcorn on the other macs while the macbook continues burning through idvd.
    Any opinions on how i can duplicate a dvd fast...need alot of copies!

    Also as to where the files are.
    I-DVD project bundle: This is the file created when you save the project.
    • [user]/Library/iDVD/Favorites: This folder is located in your home folder.
    • [root]/Library/iDVD/Favorites: This folder is located at the root of your disk.
    • /Network/Library/iDVD/Favorites: This folder is on a network system specifically
    configured by your system administrator for this purpose. (This is not the same as
    having a server networked into your computer.)

  • MS Project 2010 Server - How to move a single MS Project plan and SharePoint Project site from a PWA server to another PWA server (one at a time)

    MS Project 2010 Server
    How to move a single MS Project plan and it's SharePoint project site from a PWA server to another PWA server (one at a time)
    I have 2 Project PWA servers, i know how to copy all the databases (Publishing, Draft, Reporting, archive, content) from one SQL server and copy it to the other PWA server so both server can be identical.
    I need to only move a single project from a PWA server to another, 
    Moving the Project plan, actual time data, SharePoint site with all it's content
    Is there a 3rd party tool that can be added on to the server to help me move single project plans? to different PWA servers?
    -Isaack

    Visit my friends at FluentPro and try FluentBooks
    http://www.fluentpro.com/productsfluentbooks2013.html
    they have a 2010 version also.
    Hope that helps,
    Thanks, Eric S. Pcubed

  • I had completed my iDVD project and burned a disc. It worked great! Then someone messed with the project and put a red frame around the opening screen. Now when I burn the project, it no longer has the opening frame. How can I fix?

    I had completed my iDVD project, a Wedding Slideshow with pictures and music, and burned it on a disc. It worked great! Then someone messed with the original project on my computer and clicked around and put a red frame around the opening screen that has the Wedding theme with music. Now when I burn the project to make more DVDs, it burns but no longer has the opening frame. It immediately opens to the iMovie slideshow. How can I fix so I can burn the entire project with opening frames?

    As Bengt suggested make a disk image of the successfully burned DVD using Disk Utility. Then you can burn copies any time you need one.
    In the future once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    You can then burn it to disk with Disk Utility at the slowest speed available to assure the best burn quality.  Always use top quality media:  Verbatium, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • How to create a database in 11g from an archive taken from 10g

    Hi
    I appreciate that some of you may find this a silly question, but it is a situation that has been given to me.
    The situation in detail is that I am working on project where a part of a company has been sold off to someone else and I am working on part of the separation of IT Systems. The old company has supplied archive (ARC) files containing data that relates to the company which is being sold off. There are files such TSN, listener, and control files. The source data originated from an Oracle 10g database, but it is not possible to download a copy of 10g anymore, and so I have downloaded the earliest version of 11g. I have installed 11g without creating a new database, and my questions are as follows:
    1) Is it possible to re-create the database on the supplied data from the archive logs
    2) If possible, how do you so it - step by step (I am not a DBA but a Microsoft .Net Developer.
    Thanks
    Andy

    user633278 wrote:
    Yes, the DBA has supplied a backup of the database. All I am looking to do is to create from this backup. Is there a simple GUI that can do this for me with minimal touch? As I said I just need step-by-step instructions that can guide me through this so I don't muck it up!
    As with many things Oracle the answer is: it depends.
    There are too many potential differences between the (unknown) features your 10g database used and the feature set of 11g.
    This doc link will give you a sense of how just 'unstraight forward' it can be.
    http://docs.oracle.com/cd/E11882_01/server.112/e17222/upgrade.htm
    In particular see this section:
    Using the Pre-Upgrade Information Tool
    After you have installed the software for Oracle Database 11g Release 2 (11.2) and any required patches, Oracle recommends that you analyze your database before upgrading it to the new release. This is done by running the Pre-Upgrade Information Tool from the environment of the database you are to upgrade. The Pre-Upgrade Information Tool is a SQL script included with Oracle Database 11g Release 2 (11.2) software. This is a required step if you are upgrading manually; otherwise, the catupgrd.sql script terminates with errors. Running the Pre-Upgrade Information Tool is also recommended if you are upgrading with DBUA, so that you can preview the items that DBUA checks.
    In other words, the normal upgrade path involves performing checks against the CURRENT 10g database to identify any real or potential problems.
    Those checks are done BEFORE you take the 10g backup.
    You should also search the net for 'oracle 11g restore 10g backup' and read some of the many threads that have been posted with your same question. They will give you a sense that the process can be problematic and dependent on the type of backup (cold, hot) and how it was taken (manually or RMAN).
    Your best chances for success are to do things the 'normal' way. That means contacting Oracle support to get the discs/download for 10g and then installing 10g and recovering the 10g database from the current 10g backup. The closer you can make the recovery environment and instance configuration the same as the original the fewer problems you are likely to have.
    Or have the old company provide either the original 10g discs or at least provide the installation, control file and configuration information so you can recover the 10g database correctly.
    As already suggested you should first make sure you have a reliable COPY of those backup files and you should use that copy for all of your testing of recovery settings.
    Please tell us if you think you will be able to obtain the 10g software for reinstallation or not.

  • [svn] 4267: Change path to Assets.swf in eclipse . project file from full hardcoded path to use the FLEX_SDK variable as the base path .

    Revision: 4267
    Author: [email protected]
    Date: 2008-12-09 10:32:36 -0800 (Tue, 09 Dec 2008)
    Log Message:
    Change path to Assets.swf in eclipse .project file from full hardcoded path to use the FLEX_SDK variable as the base path. There is still an issue with Assets.swf not getting referenced correctly. If you import the framework project from Blazeds/trunk into Eclipse and get an error related to Assets.swf or that says "Unable to export SWC oem" for the time being try right clicking on the framwork project in Eclipse and selecting properties. Then in the properties panel, select Flex Library Build Path and then the Assets tab. On the Assets tab, check the check box next to Assets.swf and click Ok. This usually fixes the reference for me.
    Modified Paths:
    blazeds/trunk/development/eclipse/projects/flex/3.0/framework/.project

    Revision: 4267
    Author: [email protected]
    Date: 2008-12-09 10:32:36 -0800 (Tue, 09 Dec 2008)
    Log Message:
    Change path to Assets.swf in eclipse .project file from full hardcoded path to use the FLEX_SDK variable as the base path. There is still an issue with Assets.swf not getting referenced correctly. If you import the framework project from Blazeds/trunk into Eclipse and get an error related to Assets.swf or that says "Unable to export SWC oem" for the time being try right clicking on the framwork project in Eclipse and selecting properties. Then in the properties panel, select Flex Library Build Path and then the Assets tab. On the Assets tab, check the check box next to Assets.swf and click Ok. This usually fixes the reference for me.
    Modified Paths:
    blazeds/trunk/development/eclipse/projects/flex/3.0/framework/.project

  • The 'Reimport from Camera / Archive' button does not appear in my file menu.

    My last attempt to import material from my camera was interupted so not all the footage was imported to iMovie. I have re-attached the camera to try and reimport and the message on iMovie says that I should select the 'Reimport from Camera / Archie' option from the File Menu. Unfortunately, there is no such option in my file menu. I am using the latest version of iMovie 10.0 and my camera is a Panasonic HX-DC3. Help?

    i wasn't even interupted, it told me it had imported everything from my gopro then i aimlessly went onto edit. ejected the gopro, went down stairs. came up to continue only to find half of the vids missing from the project screen. telling me the file was missing as it was still on the camera. so i went to import again. it told me done. no not done still on camera only. then when i go to consolidate event files it tells me they are already there. no not there. i went to share finish project (after pluging gopro back in and finishing project with half the vids in the libary and the other half stillon the camera) it lets me share to the new iMovie theater but when i go to youTube it it tells me it cant as half of the files are still on the camera.
    i hover over the camera icon on the video file in the project screen where it pops up a info window telling to reimport from camera/archive......... from the file/menu...
    hm hmmmm
    nowhere to be found.
    think you forgot a few things apple.........
    fix it up

Maybe you are looking for