Burning and no track labels showing
I am transferring records to CD-R's and while the music has transfered, the Album name, Artist, and track names are not showing up when playing back the burned CD. This inormation has been entered on the playlist in the associated columns. Does anyone have any ideas on what the problem might be.
Thanks
Live Type does not support audio.
It did not do that in 1999 when it was called India Pro and developed by Prismo Graphics, nor has it since Apple bought and re-packaged it in 2003.
What you can do to work around this, is export a reference track from FCP with markers that can be used as cues for your titles. they will appear above the Timeline.
Distinct labels: Text tracks have their actual text content displayed in the track itself on the timeline.
Tracks containing an image or movie display the original file name as it would be seen in the Finder.
Not sure about your remarks regarding Flash, which is an Adobe application in any case.
Flash Player is a free download for any OS. If you want to create Flash content you need to buy the application.
Similar Messages
-
No sound track support and no track labeling
Apple drops support for flash files. Offers up it's own app for titling and yet as far as I can determine, I cannot work/sync with my titling sequence to a soundtrack or make distinct labels for the tracks I'm using. This is, if true, incredibly asinine!
I have to give up my earlier work in flash, remake it with apple software and I'm given limits one wouldn't even find in shareware. ***!Live Type does not support audio.
It did not do that in 1999 when it was called India Pro and developed by Prismo Graphics, nor has it since Apple bought and re-packaged it in 2003.
What you can do to work around this, is export a reference track from FCP with markers that can be used as cues for your titles. they will appear above the Timeline.
Distinct labels: Text tracks have their actual text content displayed in the track itself on the timeline.
Tracks containing an image or movie display the original file name as it would be seen in the Finder.
Not sure about your remarks regarding Flash, which is an Adobe application in any case.
Flash Player is a free download for any OS. If you want to create Flash content you need to buy the application. -
Want to burn Internet Archive Tracks onto a CD, and put onto my iPod
I am a Grateful Dead fan, and I've been legally downloading tracks from the Internet Archives and importing them to iTunes. The track names show up, and I can listen to the music, but iTunes won't allow me to burn CDs of these tracks or put them onto my iPod. The message reads that they are not on my hard drive. How can I get these songs onto my hard drive? These tracks are free downloads. I'll post the link from a particular show if it will be helpful.
http://www.archive.org/details/gd72-10-02.sbd.lai.158.sbefail.shnf
Any advice is greatly appreciated. It's very important to my wife and I to be able to listen to these songs. We were at many of these shows!JAKEfromMAINE wrote:
The message reads that they are not on my hard drive. How can I get these songs onto my hard drive? These tracks are free downloads. I'll post the link from a particular show if it will be helpful.
http://www.archive.org/details/gd72-10-02.sbd.lai.158.sbefail.shnf
Jake - For that particular show, they are not downloads. They are simply links that allow you to stream the show. Note the indication on that page saying "This audio is available in streaming format." You can also notice the small size of the files. Actual song files would be many MB.
Any advice is greatly appreciated. It's very important to my wife and I to be able to listen to these songs. We were at many of these shows!
Try a different show on the same archive. For example look at this one from 1974:
http://www.archive.org/details/gd1974-07-19.shure.unknown.102766.flac16
Notice the file sizes are big enough to be actual songs! They offer in 3 formats, two of which are incompatible with iTunes, so unless you wish to convert make sure you download the MP3s. And the music will never stop...
Ed -
I have created several short (3-5 minute) movies using iMovie 10.0.6 and Yosemite. I want to combine those short movies into one movie that I can loop and burn on a DVD or show in iMovie Theater. How can I do it? The movies are now shared to iTunes.
Another easy way to fix this.
What I've noticed is that upon upgrading your projects and events to work with iMovie 10, initially it will work... Until you quit iMovie and reopen it again. Any events with hashtags will show up without the star next to the iMovie event. SO, if you happen to read this, after upgrading to iMovie 10 from its predecessor, immediately change the event name to NOT include a hashtag/pound symbol.
Otherwise, if it's too late, you can either do the above or this...
Hold down option and click on iMovie. This will prompt you Locate, Create a New Library, Cancel this window, or Choose a different library. What you want to do is create a new library, call it whatever you want to, this will only be temporary. After the program opens, it should be a blank Library. Then go to File > Open Library > iMovie Library (your original library) and proceed to change the name of your events. Quit the program. Go into your Movies folder in Finder, delete the library you temporarily created, and your back in business. -
Music album cover images and track titles show on iPhone 4s but music doesn't play - any ideas?
I am a Young at Heart Senior, new to iPhone 4s, have an old creaking pc with Windows XP Home.....but plan to enter the real world any day soon by buying a new Mac!
Here is my problem, I purchased an album on iTunes and mistakenly started to sync it to my phone, (although I don't have iCloud loaded on my pc). I stopped it mid download and later noticed that the total track numbers were showing as a red number above the "more" button as if they were waiting to complete the download. It stayed there while I thought about it for a few days, but when I click the Album button all the tracks are listed.
Now to the funny part.....when I click on a track or indeed any of them, it doesn't play a sound...but the progress bar above moves as if "now playing".
So, I thought.... no problem, I would connect the phone up to iTunes and delete the tracks....but when I do so, this album and none of it's track titles show in my music list for the phone......weird.
So, I have a large album with titles only on my phone, no music behind the titles (which, incidentally, is rubbish anyway) and I can't get rid of it off my phone, any of you young whizzy iPhoners have any ideas how to clear it off???
I did think I might just Restore my phone, but wondered whether downloading all my stuff from iCloud would still include the dreaded "Now That's What I Call Christmas" album, which I only purchased in late 2011 to play at a seniors Xmas party...........you live and learn!
You will guess from my ramblings that I am not at all techy, but consider myself willing to learn and apart from this hiccup........I luuuurve my iPhone!If you have all your music on the cmputer then i would connect up my phone uncheck the Sync Music option and apply.
This should take all the music off your phone .Then you can resync the music back on to it.
If this doesn't work maybe a restore to factory settings and start from scratch is the way to go -
I've lost my iPhone is any way of tracking it I have rang and put a bar on it and also tried to track it with the my friends app and its a no show :(
The lost iPhone has to be turned on.
iCloud> Find my Phone ( if you had it turned to "on." ) -
I have a mac os x 10.7.5 and made a slide show on iphoto. now I'm treying to burn them to dvd-r for gifts but can't. any help?
Export to the desktop as a QuickTime movie and then right click on the QT movie file and burn to disk - teh person you give the gift to will have to have QT player on their computer to play the slideshow
LN -
Hi, I'm trying to burn my Imovie project to a dvd. I went to share it to iDvd and there was no option to do so. Instead I shared it to quicktime and the project didnt show up when i tried to open it in iDvd. I also tried sharing it to media browser and it didnt show up either. Please help me!
While we all have MacBooks in this forum not all of us use iMovie. There's a iMovie Support Community where everybody uses iMovie. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/ilife/imovie
-
When I use Music on m iPhone on 3G with the downlod disabled on 3G, shuffle is not working.
It stops after each track, as if it was not capable to find the next local track.
Morevoer, it plays a track and show another one. It seems it plays the previous track but show the following.
This makes my iPhone not usable with iTunes Match unless I disable show tracks from iCloud.Hi Bhushan,
Isuse is with IIS Process. Whether its running on 32bit or 64bit. that's the one who decide which dll they want. So, in above the resolution is
If you are working with 32 bit you can use
string folder = Path.Combine(Environment.GetFolderPath(Environment.SpecialFolder.System), @"..\Microsoft.NET\Framework\v2.0.50727");
while the other way for 64 bit IIS Process, you will require
string folder = Path.Combine(Environment.GetFolderPath(Environment.SpecialFolder.System), @"..\Microsoft.NET\Framework64\v2.0.50727");
Hope this answer will helps some other developers issue.
Regards, Brijesh Shah -
How do I bounce audio and midi tracks at the same time to burn a CD?
Hi there,
I would like to bounce a song with both audio and midi tracks recorded in it onto a CD.
Despite ensuring that I am doing a realtime bounce (not offline) I am only getting the audio tracks burnt onto the CD - the midi isn't getting bounced to the final output.
This must be a stupid question, if someone would be so kind as to give me an obvious answer I would be most grateful.
Thankin y'all
amataHi A,
if you use the instrument (with logic virtual synths) tracks for midi,
it will.
BTW, why don't you do it offline?
It will be so much faster.
Kindly regards,
Jorge -
I downloaded Lion on my iMac (i7 mid 2010) and my Apple applications show up in the first Launchpad screen in two folders titled "Utilities". How can I fix this? At first I didn't think they were there.
Click the Utilities icon/folder to see the contents and then drag the items out of the folder upwards onto the Desktop and they will be removed from the folder.
-
IDVD problem burning and multiplexing - gets stuck but ejects the DVD and the DVD doesn't play
I am having trouble burning DVDs. Everything seems to be working fine during the iDVD project creation. I can watch the movie and select scenes within iDVD. Then, when I go to burn the DVD, it gets stuck at the burning/multiplexing stage - the wheel just keeps spinning and says there is about a minute left. Yet it ejects the DVD and the DVD won't play when inserted into a DVD player. It will show the intro and the scene selection pages but when you click on one of the scenes, it gets stuck and doesn't play. I have already uninstalled and reinstalled iDVD. The problem persists. It seems like the burner itself is the problem. What can I do to fix it? I have Mac OS X Version 10.6.8 with a 2.8 GHzintel Core 2 Duo and iDVD version 7.0.4.
Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W -
Windows 7 - Files missing from network share after trying to burn and no data cached to be burned
I ran into an issue trying to burn some file from a network share using Windows 7 Home Professional. I was trying to burn some .jpg files from a mapped network share drive using explorer. Every time I would drag the files to be burned from
the share drive to the explorer screen to be burned, the files would disappear from the share. To make things worse the files would not show up in the screen to be burned. I was unable to locate any of the files on either of the systems when performing
a search after this took place. I verified that the steps that I was taking to burn the files were the same as outlined on the Microsoft site. No matter what I did to burn these files, they were deleted from the mapped network drive.
Below are the steps that I took that both resulted in the files being deleted as well as what I had to do to finally burn the disc.
Steps that resulted in files being deleted:
1. Insert blank CD into drive.
2. From prompt select burn using explorer (Mastered Format)
3. Enter title and select with CD/DVD, click Next.
4. Open a second explorer window, navigate to mapped network drive with files to be burned and snap next to explorer to be burned.
5. Drag and drop the files from the share drive to CD.
This where the train would fall off the tracks every time. I would receive a message that the file(s) no longer exist and if I wanted to continue. From here the files would be deleted from the share drive. The best part is that the files
would also NOT be locally stored to be burned.
Steps to burn share files WITHOUT delete:
Follow steps outlined above, but instead of just dragging and dropping the files as outlined in step 5 select the files from the network share location, right mouse select copy. Then right mouse select paste in the explorer window to be burned.
I have tested this many times and every time ended up with the same problem. At this point I am sure that there is a problem with the way that Windows 7 is performing the burn. The system that I was using to burn is Windows 7 Home Professional
with all the patches and updates loaded. The remote system is Windows XP Professional with all the patches and updates loaded.
Thanks in advanceYes, the problem is still continuing. However, after looking into as much of it as I can, I can confirm something that r.p.b_ started stumbling on. The files are deleted IF AND ONLY IF a user is using the built-in Windows 7 disc burning utility AND is dragging
and dropping the files to the drive from a network share; this doesn't happen locally. If you watch what happens in the native folder, the files are literally scrubbed from the drive as they are processed and added to the image. However, if you Right Click
on the files and copy them, then Right Click->Paste onto the drive, they remain. (The keyboard shortcuts also worked.) Also, 3rd party disc burning utilities function they way the should. (In other words, they don't delete the files.)
My speculation is that there's a bug in the coding that sees the network share as a temporary buffer file while the image is being prepared. Then, as the files are processed in what ever way is needed, the "temporary buffer" is being deleted. The result:
lost files on a network share. But, this is just speculation. -
Video with stereo track and click track for live performance
Hello,
I have a video that was created in FCP sync'd with a stereo sound track and a click track. I need to play this video live (using projection) with the stereo track routed to the main outs and the click routed to the in-ear monitors for a performer to sync with. I have not done this before and am trying to wrap my brain around it. I'm also hoping to come up with the easiest and most reliable solution. As I understand it, this video will not be able to play back from a burned DVD, but rather will need to play back in Logic with 2 audio tracks (L/R) for the sound track and then 1 track for the click. These 3 tracks can then be routed to their required destinations from a soundcard or mixer.
Does this seem to be the best and most reliable method? I've only burned audio to video (never using a click) in FCP before and have always played back from a DVD. Now I have this live player/syncing component and am not sure of the best way to do it. I have some experience with Logic, but limited.
I really appreciate any suggestions/tips any one might have.
Thanks.I've opened the movie (with stereo track) in QT Pro and then added the click - and now the 2 audio files are there, sync'd up.
When you say you opened the movie in QT Pro, I assume you mean the QT Pro version of Quicktime Player 7. So let's say you have the movie open in Quicktime Player 7, and you press ⌘J (Window > Show Movie Properties). And in the window that appears, hopefully you see several items listed, including Sound Track 1 and Sound Track 2. These are your two audio files, that are now part of the movie file. One of those files is your stereo soundtrack, and the other is your click. So let's assume that this is a total of 3 channels of sound (because I understand your click is mono).
Select Sound Track 1, and select the tab Audio Settings. Let's assume this is the stereo soundtrack. In the scrolling area at the bottom right of the window, under the heading Assignment, you should see Left and Right. Let's leave it that way.
Now select Sound Track 2. Under Assignment, there should be just one item listed (that is, there is only one channel in this Sound Track, if the click is mono). Under Assignment, it probably says Mono. Change that to Center.
Save the movie. We're done with Quicktime Player for now. Launch Audio MIDI Setup. It's here:
Macintosh HD/Applications/Utilities/Audio MIDI Setup
I assume you have an audio interface connected that supports at least 3 channels. In AMS, find the window (or tab, depending on your OS version) for Audio Devices. Select your audio interface. Select the Output tab, and press the button Configure Speakers. In the window that appears, select Multichannel, and change the menu selection from Stereo to 5.1 Surround.
You will probably see that "left front," "right front," and "center" are assigned to outputs 1, 2 and 3, respectively, of your audio interface. If not, make it so, and press the button Apply.
Now when you play your movie, the stereo soundtrack will appear at outputs 1 and 2 of your audio interface, and the click will appear at output 3. Now you can cable your stereo mains to 1/2 and your in-ear monitors to 3. -
Bunring CD From Playlist-AND KEEPING TRACK NAMES on Disc
Every time i use itunes to burn a cd from the playlist (where the original audio is NOT in the itunes library but sourced from another folder) the cd writes without the orig file names showing up on the cd-r. instead it just reads each track numerically i.e. track 1, track 2 etc.....
How can i burn a cd-r from a playlist in itunes and have the orig track names show on the cd-r tracklisting? what am i missing here?
itunes 8.1.1
Mac Pro 2.66Ghz - QuadCore - Nehalem
OS 10.5.6If you are selecting no gap between songs in the Burn options, there will not be a gap.
Note that if the song itself has a second or two of silence at the beginning/end, those will still be played as silence because they are part of the song.
The gap is between the designated time for the end of the song and the designated time for the beginning of the next song.
It's not the gap between the end of audio of one song and the beginning of audio on the next song.
Maybe you are looking for
-
I bought a $15 app GTA Vice City a while ago and I just started using it and it doesn't work. I checked all the requirements and my laptop meets all of them. I also have contacted Rockstar Games and they didn't help. Can I get my money back? Its frus
-
Can Apple do Something about his or can I?
I have recently been having trouble with the alarm capabilities on my iPhone. When I attempt to set a simple alarm, and if anything comes before that time(i.e a text or a missed call) my alarm will not go off until I unlock my iPhone to look at whate
-
Need to Add a button in ALV Tool Bar
Hi, I have a requirement where in i need to add a button to a standard ALV report. Its using the class CL_GUI_ALV_GRID. There is a Badi for the report. The Report is co05n and the Badi is WORKORDER_INFOSYSTEM . I am getting the handle of CL_GUI_ALV_G
-
Trapping - "Do you want to save changes" alert button pressed
When exiting a data block with unsaved changes, the user is prompted with "Do you want to save the changes you have made ?" The possible button click responses are "Yes", "No", "Cancel" Is there a way to programmatically catch the click on the "Cance
-
Design View - Everything Highlights
In Design view of CS5 Dreamweaver (OS Windows 7), when I click to make a minor revision, everything highlights. I read a post to right click in the design view & go to Element View > Full because I have the following style in my wrap div in my CSS f