Burning audio discs in exact order of play list

I have looked at some discussion re this topic but it is all old and the problem seems not to be resolved. When I burn a disc, it places all the tunes out of order, so when I print the cover sheet playlist, it doesn't match with what is burned on the disc. This is just not acceptable. What can be done to resolve this rather irritating problem? duc13

OK, based on that info, I see the following at pcidatabase.com:
Device Id Chip Description                   Vendor Id Vendor Name
0x1077 Gigabit Ethernet Controller (Mobile) 0x8086     Intel Corporation
0x4220 Intel 54 MBit/s Notebook WLAN Card    0x8086     Intel Corporation
Wired and wireless, respectively.
From this, please try installing the following two packages from your support site:
Intel PRO/1000 LAN adapter software
http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-r-series-laptops/thinkpad-r51/downloads/DS004058
Intel Wireless LAN (11abgn, abg, bg) for Windows XP, 2000 - ThinkPad
http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-r-series-laptops/thinkpad-r51/downloads/DS003878
Once done, you should be able to connect via your choice of wired or wireless, and then be able to use the TVSU application to check for other drivers.
Regards.

Similar Messages

Drive Stopped Burning Audio Discs

My Disc drive (G5 3 years old) seems to have stopped burning Audio discs using Toast. It seems to be doing data discs ok, but it appears domestic and computer players will now no longer accept my audio discs (Even both my Macs). Its always worked fine in the past and nothing has really changed to my system. Is this the sign of an ageing drive and do I therefore need a replacement? Is there anything I can do? I have tried burning different speed settings.
Thanks folks

If the G5 is also having trouble reading the discs it sounds as if the drive is producing really bad burns. Having either the cd or dvd side of things stop working properly is a classic sign of a drive on its way out. The drive begins to produce burns with much higher error rates, and more serious kinds of errors, than usual. All drives produce errors with each burn, but it's the kind of error and intensity of the error that matters. Drives have built in error correction circuitry that can handle the most common error type as long as they are below a certain level. Older drives often begin to either produce much higher error rates that the reading drive can't compensate for, or produce a non-correctible type of error. To make matters worse, the number of errors depends not only on the drive, but the relationship between the drive and disc being used. Each drive has firmware written to tell the drive how to write to different brands of media. Apple rarely updates the firmware on their drives, so after a few years the drive has to guess the writing strategy for each disc and this too can lead to high error rates. And to confuse things even further, companies that sell discs rarely make them, but buy them from oem manufacturers. So one batch of say TKDs may be Optidisc and another CMC and you have no way of knowing by just looking at the disc- you are thinking you are using the same discs but aren't.
So one or more of these factors is giving you burns so bad that the drive the disc was burned on is having trouble reading it, and that's a very bad sign. I would suggest from my experience with many drives that a drive behaving as yours is - one that is 3 years old - should be replaced. A new drive will only run you about $40, it will have new firmware allowing it to work with current discs, and should be faster also.
If you have access to a pc there are actually a number of programs that will allow you to test the discs and see what type and how many errors the burn has produced (I find this one of the few redeeming values of PC's). These programs are invaluable in situations like yours, and as I said, from my experience, the programs usually indicate with your symptoms very high error levels or errors that cannot be corrected.

Can burn a disc but it won't play on my computer!

Please help. Since upgrading to Tiger I have not been able to use DVDSP 4. I burn a disc the same way I always have using the same brand of discs that I have always used. The disc burns with no error message. When I try and play the disc on my computer I get the message: Supported Disc Not Available! The disc won't play in any other player either. I'm going nuts over this. Any ideas?

I burn a disc the same way I always have using the same brand of discs that I have always used
Describe both your usual disc-burning technique, as well as the brand of discs you're using (as well as whether they're +R or -R).
Are you burning with an internal SuperDrive, or an external burner?
If the disc won't play on your computer and "won't play on any other player either," that sounds like an overall bad disc, not just one that "won't play on my computer."

Burning MP3 disc in "right order"

Hello everyone. I've been trying to burn an MP3 disc. Burning all the tracks onto a disc has been successful but for some reason, I have not been able to get it in the right as it reflects on the playlist. Can anybody help me?

Here are the instructions from the page you liked to:
How to burn by playlist order
Create your playlist.
Click "Song" to sort the playlist by song.
Make sure the songs are in the order you want to hear them on the CD.
Click Burn CD.
Insert a blank CD and burn the disc.
I have yet to find "Song" to click on. The word is nowhere to be found. It'd be nice if they'd tell us where "song" is so I can click on it.
I've also noticed the program sometimes will not "read" that I've inserted a blank disc.
None of this was happening last week. Is there a way to go back to iTunes before the last (lousy) upgrade?

Two hours to burn audio disc in itunes

for some reason, lately it has been taking an hour to burn an audio disc. the timer starts at nearly two hours, then backs down to an hour, gradually. burning at 12x, like i always have.
Thanks

Hi,
Seems as though your burner is faulty or beginning to fail!
Jim

Why is there no burn to disk option on my itunes play list

Hello I'm trying to burn my itunes playlist to a cd and I see that there is no burn option when I went to file i see its not there either why is that????????

No one can comment on exactly why it was not included in iOS 5. There are a number of news reports, however, that indicate Facebook's privacy policies were not acceptable to Apple during the time iOS 5 was in development. I would not be at all surprised if this were the case. Facebook was forced by the courts in the EU to radically alter their privacy policies there in order to comply with EU law. Until Facebook improves their respect for user privacy, I don't expect we'll see full integration at the OS level.

Burn to disc – iMac6,1 (Intel Core 2 Duo) OS X 10.4.11

Can't understand why I canot burn to disc!!!
System Profiler lists the following under Disc Burning Hardware...
MATSHITA DVD-R   UJ-85J:
Firmware Revision:    FCQA
Interconnect:    ATAPI
Burn Support:    Yes (Apple Shipped/Supported)
Cache:    2048 KB
Reads DVD:    Yes
CD-Write:    -R, -RW
DVD-Write:    -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD:    Yes
Burn Underrun Protection DVD:    Yes
Write Strategies:    CD-TAO, CD-SAO, DVD-DAO
Media:    No
Can anyone help with suggestions?
Many thanks!

I think we're all awaiting an update to resolve this issue. Mine does the same thing, i think you'll find other similar posts in both the imac and leopard forums.
My temporary fix attempt is going to be using an old wireless ethernet bridge connected to the ethernet port of my imac.
For what its worth you can keep attempting to connect via the airport, and it may eventually connect, mine does, but once you wake from sleep you'll likely have the same issue.
Not what you were hoping to hear i'm sure.
Hopefully an update soon?

I have created an I-tunes playlist consisting of audio recordings recorded in Quick Time 7. The play list works fine in the computer and in the I-pod. However; I am unable to burn the playlist to a Cd disc. what am I missing ?

I have created an I-tunes playlist consisting of audio recordings (AAC) recorded in Quick Time 7 Pro.. The play list works fine in the computer and in the I-pod. However; I am unable to burn the playlist to a Cd disc. What am I missing ?
Audio recordings created with Quick time Player 7 and installed as playlist in I-tunes . Playlist works fine in Ipod; unable to burn to a disc.

Hi ! to Bd Aqua !
Thank you for your response. :
1. Audio recordings recorded in Quicktime 7 pro . Eighteen separate short recordings (18 tracks).
1A. the combined playlist byte is 28.3 Megabytes
2. Moved to I-tune.
3. Created playlist in I-tunes.
4.I go to file dropdown and request "burn playlist to disc"
5. Burn Settings dialog box appears. I click burn.
6."Insert blank disc", appears in top wlindow.
7. insert blank disc; the 'Insert blank disc order" disappears but nothing happens after that.
There is no indication or even a hint of anything happening.
Hope you can help, Thanks

I have asked now twice!!!! Did iTunes make a change that makes AUDIO cd's not read on older cd players? The iTunes AUDIO discs I burn in mixes no longer play in my 2004 Chrysler, 2006 Toyota, or my home cd player. PLEASE HELP.

I have asked now twice!!!! Did iTunes make a change that makes AUDIO cd's not read on older cd players? The iTunes AUDIO discs I burn in mixes no longer play in my 2004 Chrysler, 2006 Toyota, or my home cd player. PLEASE HELP.

ByteMeNow wrote:
Where soes someone go to get offical help wth Apple iTunes?
You would call Apple Support, for which you would probably be charged for the support.
Note that just because those CDs work with your old computer doesn't mean that it's still not an issue with those CDs and the burner in your newer system. Some CD brands just don't work well with some optical drives. If you haven't tried a different brand, and if you're using CD-RW trying CD-R, I would suggest you give that a try just to eliminate that possibility.
Regards.

Can't play PC burned MP3 discs w/out adding to library???

This is really annoying me...
When I insert an audio cd, an mp3 cd burned with iTunes, or even music files burned as a data cd with iTunes, the disc shows up in my source list, and I can play it without having the songs added to my library.
When I'm done listening, I eject the CD, and it's as if it was never there.
My roommate has all these mp3 discs that he burned on his pc (I think as data discs) that do not show up on the source list.
I usually drag the disc icon to a new playlist in order to listen to it.
I turned off "copy files to iTunes music folder", because I don't want his files on my hard-drive.
But the file names still get added to my library and when I'm done listening I have to go in and delete them all - Major pain in the butt.
Is there a way around this?
Even if I have to use a different app to listen to his discs - that's fine.
I just want to be able to pop in his discs, listen to them, and then pop 'em out when I'm done, without them leaving any 'residue' on my Mac.
Thanks in advance,
Dennis

Just downloaded & tested Audion.
Perfect!
Does exactly what I want it to do, nice and simple.
Thanks!
p.s. - wish I could change your post from "helpful" to "solved" but apparently I can't - sorry about that.

I reinstalled I-Tunes several weeks ago. Since then I can no longer burn MP3 Discs with Title and Artist Info. Sometimes it only burns every 3rd song. No Audio CD it seems to function OK. The version has the "cloud" but I don't know if that matters or

I reinstalled I-Tunes several weeks ago. I can no longer burn MP3 Disk with Song/Artist info onto disc. It comes up as No Artist/No Title on car CD unit. Old MP3 Disk previously recorded still show all info. Sometimes only every 3rd song is on the MP3 CD. On Audio Disc there is no change and all info still shows up. The new I-Tunes version has the "cloud" on it if that could make a difference. In the select Burn CD mode I can select testing and add song info for Audio Disk but it shows shadowed out for MP3/Data. I added and removed ID tagging from my list to see if that made a difference but it didn't.
Any Thoughts?
Jim

This may help. Audio files are actaully in the DATA folder. These can be editted with Soundbooth then they must be imported intot the specific slide in the Powerpoint presentation. Publish the presentation (as you'll read below) and *should* work This reply came from robva65 [email protected]
Let's try this: *Publish* the PPT deck you have. What you'll end up with is a set of files and folders, but I want you to look for the *data folder* that's created as a result of the publishing process. (Unless you specify where you're publishing to, Presenter will publish to a directory called "My Adobe Presentations" by default, so you may have to look there on your harddrive) Inside the data folder will be a list of mp3 files, which, if everything goes smoothly, should make it much, much easier to see which audio is used by a specific slide.
Here's what I mean: for example, after publishing, I have a data folder and inside I found the following file: a24x9x3.mp3 As I double click the mp3 file (which causes it to play using Windows Media on my laptop), I can hear that it corresponds to my slide 9 in my PPT deck. And there's corresponding mp3 files for each and every slide I have in my deck. I'm clicking another file (wouldn't it be nice to see what I'm doing???) a24x20x3.mp3, and that file corresponds to my slide 20 content in PowerPoint.
So again, give publishing in PowerPoint a shot and see if that makes it any easier. Well...not nearly as easy as recording in Audition/Soundbooth/Audacity, but it's close enough to hopefully dig you out of that hole you're in now.
Hope this helps ~rich

No audio on disc image or on DVDs played in DVD player

Help, I'm stuck.
I have made several movies in iDVD and burned them successfully. They always played with no problem. Now I am trying to play them in the DVD player and there is no audio. There is also no audio when I make a disc image. And there is also no audio when I try to copy on of my movies back onto the disc utility. I am also not getting audio from commercial DVDs in the DVD player. All of these DVDs still work fine in my regular DVD player hooked to the tv.
I have version 6.0.4
Thanks in advance!

Hi
Most common origin is .mp3 .avi or other strange audio format - or -
imported audio from iTunes.
Medicine: Copy out as audio .aiff then use this in the movie then to iDVD.
If the DiskImage doesn't play OK - don't waste to burn DVD discs from it.
*OTHER THINGS*
Not knowing the origin to Your problem - General approach when in trouble is as follows:
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy: Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
• Program miss-match: iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK - DON’T work under Leopard
• Program miss-match: iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• Program miss-match: iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
iDVD pref file resides: Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named: com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
Last resort:
from Craig: Solved the problem!! Finally!! I deleted every iDVD application and folder from my boot drive, emptied the trash and then installed iDVD 08 using the customize option and I am up and running.
Yours Bengt W

Why won't m4a files burned to disc play in cd player?

Download purchased from itunes and burned to disc (m4a format) BUT WON'T PLAY ON CD PLAYER..WHY?

Does your CD player accept AAC (.m4a) audio files?
If not, burn an AudioCD.

Disc keeps ejection when trying to burn audio cd

Trying to burn a playlist to audio cd and the disc keeps ejecting. Have done this with no problem before, but since upgrading itunes have this problem. Any help appreciated

I have the same exact problem trying to burn a disc with iTunes using an external CD/DVD drive. I'm also running OS 10.4.11, but on a 1.83 GHz Intel Core Duo Macbook with 2 GB RAM. My external drive is a Samsung SE-S084C/RSBN.
Has anyone out there found a fix?

Lose audio when burning to disc image.

Hey guys. I am losing my audio half way through my project when I play it on a dvd. My audio is there after I export to quicktime, but when I create the disc image through iDVD and burn through Roxio toast my audio is only there toward the first part of my project. The video portion is fine though. Any thoughts on this would be great .
Thanks,
D.T.

Burning a disc image and copying it to disc is the recommended workflow around here -- it is one more action that you have to initiate, but it provides greater control (set the burn speed down to 1x or 2x) and it is less demanding on your computer (fewer errors?).
Re the audio -- if the music was purchased from iTunes, you may be caught up in a problem that should have been resolved in iLife06. There's a workaround (burning a CD from iTunes and re-importing) but provide some more details on the audio.
John

Burning audio discs in exact order of play list

Similar Messages

Maybe you are looking for