Burning Blu-Ray: Sometimes successful / Sometimes not

I've been burning Blu-rays for the last couple of days. After a couple of burns, I get this message:
But, here's the deal:
I do indeed have a disk in the burner
I can't eject said disk (so the computer may "find it") without dismounting...
If I do unmount the burner, FCPX starts the burn process all over... with the same above message
A "cycle" ensues... until I restart--not just the app--but the computer.
Then... I'm good for a couple of burns before the cycle starts again.
Trouble shoots:
I've tried this across TWO different burners--two different brands, one NEW out of the box. Same result.
This has happened across TWO different projects in the same library
Anyone have any ideas?

Luis Sequeira1 wrote:
But I don't know if Disk Utility or some other program can burn the image to Blu Ray.
G'Day Luis,
Yes it works just the same as DVD.
Al

Similar Messages

Try to burn Blu Ray. It says: Not enough disc space

Hi everybody,
I try to burn a blu ray disc. My Blu Ray Writer is: HL-DT-ST BD-RE BH10LS30
I use 25GB BD-R Discs from Verbatim.
If I try to burn a 20GB *.iso file, every tool I tried says immediately: There is not enough disc space. What is wrong?
Even if I try to burn smaller files to Blu Ray, it always says: There is not enough disc space.
I'm confused
Regards
Maik from Germany

The 'There is not enough disc space' message appears immediately. It doesn't matter if the output file is 500MB or 20GB.
I tried different BD-R discs. It is always the same message.
I found a similar case:
I am trying to burn a blu-ray disc but having problems.
Do I really have to buy a 90$ tool so I can write my movie on BD-R?

"media not present" error when burning blu ray in PE12

I have two systems, both ground-up builds, identical Win 7 Home Premium and Premiere Elements 12 installs. Both systems have internal blu-ray burners. One burner is an ASUS BW-12B1AT and the other is a Pioneer burner (don't recall the model number).
System 1: Intel 4770k with Gigabyte MB
System 2: AMD 8-core with Gigabyte MB
System 1 gives "Media not present" error in PE12 when attempting to burn to blu ray discs using Verbatim discs. System is able to burn DVDs and CDs, and playback blu ray discs. System is also capable of burning blu rays using Nero.
System 2 works fine - blu ray media is recognized instantly by PE12 when in the drive and burns blu rays perfectly.
I swapped the blu ray drives and SATA cables from System 1 and System 2 with the same result - this eliminated the drive manufacturer and cables from being the problem, as both drives worked perfectly in System 2 and neither worked in System 1. I also tried different SATA ports and power supply taps on System 1 without any success.
Then, I noticed that on System 1, with the dialog box open and indicating the "media not present" error, if I ejected the blu ray disc and reinserted it, the burner LED would flash 18 times (approx. 1/sec) and then pulse briefly indicating a burst of activity for about 1 second, as if it was either reading the disc or writing to the SATA. If I pressed the "rescan" button during this brief burst of LED activity, then the disc was recognized and I could proceed to burn it. If I tried to press the rescan button at any time before this instant or after, the "media not present" error did not clear.
To me, this is an indication that something in the handshake timing of the SW and the burner is not correct, and that timing differences in the system HW are not provided for in the SW. I see that many others have had this issue and have had to buy work-around image burners to address this. I believe your burner drivers need to be reworked to eliminate this bug. This is evidenced by the fact that Nero works and your SW does not, and that different systems consistently exhibit this problem.
Please let me know when you will have a SW patch to address this or if you have any idea of system settings that can be adjusted (I don't know of any myself) that would eliminate this problem.

pastrobes
This is not Adobe. Rather user to user. If you want to contact Adobe, your likely route is via Adobe Chat.
If you have a feature request or bug report, then consider filing a Adobe Feature Request Bug Report Forum with Adobe
Adobe - Feature Request/Bug Report Form
The likelihood of an Adobe engineer seeing your thread here is essentially slim to none.
Your results are very interesting but lots more variables to consider.
Do you have any version of Premiere Elements other than 12? It would be interesting to learn if a prior version's burn
dialog would present with the Media Not Preset issue for your burn to Blu-ray System 1. That is easy enough done with a tryout of
11 or 10 or 9 from the following web site. ProDesignTools: Adobe® Developments in Focus
On the other side of the coin, you could give the new version a look in this regard. A new version is expected at the
end of September 2014.
As an aside, have you updated 12 to 12.1 Update, using an opened project's Help Menu/Update. If not, I would encourage
you to do so. It does correct an Expert workspace text styles issue plus other matters undefined by Adobe.
ATR

Premiere elements does not recognize Blu-Ray disc, says media not present. Under 12 I was able to record 3 blu-ray dvds using the same burner and discs I'm trying with 13. What is the problem?

I installed PE13 and cannot burn blu-ray DVDs. I was able to burn 3 blu-ray DVDs using PE12. When I select DVD from the menu it recogniazes that it is not a stadard DVD as I get an 'incorrect media' error message. It will burn standard DVDs of the same video using standard DVD mefia.
What is going on here?
When I loaded PE 12 back on the computer I cannot load a file created with PE13. Looks like a format change? Can I convert file back to PE12?

Juergen
Terrible news. Sorry about that.
The following is an excerpt from my Premiere Elements 13 blog post, the section on Publish+Share/Disc
The ISO Image choice is only in Premiere Elements 13.
DISC. Major Changes Include Burn to offering ISO Image for DVD, Blu-ray, and AVCHD plus 2 new 1080p @ 23.976 presets for Blu-ray.
The major categories of Publish+Share/Disc/ are DVD, Blu-ray, and Blu-ray. DVD and AVCHD offer burn to disc, folder, and new ISO image. Blu-ray offers burn to disc and new ISO image.Like 12, the new version's DVD, Blu-ray, and AVCHD presets do not have an Advanced Button under which to customize the preset and do not have a "Share Work Area Bar Only" option for selective sharing of the Timeline content Sketch of DVD, Blu-ray, AVCHD includes
DVD (new features)
Burn to:
Disc
ISO Image (4.7 GB) NEW
ISO Image (8.5 GB) NEW
Folder (4.7 GB)
Folder (8.5 GB)
Presets
NTSC_Dolby DVD
NTSC_Widescreen_Dolby DVD
PAL_Dolby DVD
PAL_Widescreen_DVD
As before in 12, frame rate is 29.97 interlaced frames per second NTSC and 25 interlaced frames per second PAL.
AVCHD (no changes)
Burn to:
Disc
Folder (4.7 GB)
Folder (8.5 GB)
Presets
H.264 1440 x 1080i NTSC Dolby
H.264 1440 x 1080i PAL Dolby
H.264 1440 x 1080p NTSC Dolby
H.264 1920 x 1080i NTSC Dolby
H.264 1920 x 1080i PAL Dolby
H.264 1920 x 1080p NTSC Dolby
Except for the two 1080p presets with frame rate of 23.976 progressive frames per second, the other presets all have a frame rate of 29.97 interlaced frames per second NTSC or 25 interlaced frames per second.
Blu-ray (new features)
Burn to:
Disc
ISO Image (25 GB) NEW
ISO Image (50 GB) NEW
Presets
H.264 1440 x 1080i NTSC Dolby
H.264 1440 x 1080i PAL Dolby
H.264 1440 x 1080p NTSC Dolby NEW
H.264 1920 x 1080i NTSC Dolby
H.264 1920 x 1080i PAL Dolby
H.264 1920 x 1080p NTSC Dolby NEW
Except for the two 1080p presets with frame rate of 23.976 progressive frames per second, the other presets all have a frame rate of 29.97 interlaced frames per second NTSC or 25 interlaced frames per second.
Look to Burn To: in the Burn Dialog, and scroll down there to the option that you want.
Please let me know if this ISO Image choice is going to work for you. But I will keeping searching for the answer to these no media present situations.
ATR

BE NICE TO BE ABLE TO BURN BLUE-RAY DISC, I TRIED AT LEAST 3 BURNERS APPROVED BY ADOBE WEBSITE AND IT'S NOT WORKING

BE NICE TO BE ABLE TO BURN BLUE-RAY DISC,
I TRIED AT LEAST 3 BURNERS APPROVED BY ADOBE WEBSITE AND IT'S NOT WORKING...

Maybe the problem is caused by a stuck CAPS LOCK key? 8/

Is my hl-dt-st bddvdrw gbc-h20l capable of burning Blu Ray discs (BD-R)?

Hello. I have a HP Pavilion Elite m9470 Desktop PC with an hl-dt-st bddvdrw gbc-h20l drive running Windows 7 Ultimate (the pc came originally with Vista). For the first time I tried to burn a Blu Ray disc BD-R in fact. When I loaded the disc into tray, the pc started trying to read the disc, without success for endless minutes. In fact the door could not open even manually - I had to restart the system to take the disc out.
I always thought that the specific drive was capable of not only reading but also burning Blu Rays - could someone let me know? Is it a matter of appropriate software?

You're welcome.
Click on support & driver links on the HP site, enter the complete model # of the PC, you will see a links for information pertaining to your PC, like: HP Pavilion Elite m9470gr Desktop PC Product Specifications
Enjoy

Burning blu-ray discs

Here at the office we're running all macs with Final Cut Studio 2. We want to be able to encode for blu-ray and also burn blu-ray discs. I know we need an external burner, but does our current software support blu-ray?

Or Netblender's DoStudio for rather less money. PC based but we successfully run it on a Mac in Bootcamp. Just completed our first full featured Blu Ray and sent for replication.
If you know DVD-SP well then learning curve not too bad and they have very good support and forum.
If you just need to 'dump' hi def material to Blu Ray then FCP and/or Toast may prove to be enough for your needs

Once and for all: Can DVD SP build Blu-Ray disc content or not?

Maybe I’m crazy, but…
Everything I’ve heard to date has Apple backing the Blu-Ray format. Believing this, I just spent $900 on a new Lacie D2 external Blu-Ray burner (which IS Mac compatible). I also purchased Toast 8 (which IS Blu-Ray compatible).
All I need to do now is build my disc content (assign H.264 1920x1080 content, build menus, etc.) then drop it all into Toast and burn Blu-Ray video discs… right?
So what is all this I’m reading here about DVD Studio Pro supporting the HD DVD format and not Blu-Ray???!!!!!!
Am I going to be able to do this using DVD SP or not, and if not, can anybody tell me a program I can use to build my Blue-Ray disc content? (All of my HD content is H.264 (1920x1080) rendered directly from Adobe After Effects).
My deadline for this project is fast approaching and I’m hoping somebody can shed some light on this. If I can build Blu-Ray discs and burn them on my Mac using Toast 8 and the Lacie D2, I’ll make my deadline and justify the $900 spent thus far.
Can anybody help?
Thanks, SM

Wait a minute,
Maybe I don’t need to buy PC to run DVDit Pro HD. I have a Mac Pro! With Boot camp I have a PC! Any reason I shouldn’t try running DVDit on my Mac via the Boot Camp beta? That way I'd also be using my Lacie D2 Bu-Ray drive. And with Roxio's 30 day return policy I haven’t much to loose...
I'm calling Roxio tech support. Let you know how it goes
Sark
Message was edited by: sarkmachine
A LITTLE LATER:
Just got back from digging into Roxio's discussion forum and here's what I found:
I have travelled down the same frustrating path my friend!
But I did succeed doing it all on my new mac Pro, finally...
Install BOOTCAMP (free beta). Install WINDOWS XP ($269 from AMAZON). Install ULEAD BD RECORDER, which comes with DVD MOVIEFACTORY 6 (free trial, $80 to buy).
BDAV worked well from SONY V1-U burning to MATSHITA BD-MLT SW-5582 and played perfectly in new SAMSUNG 1200 palyer on my 57" DLP.
TIP - install BOOTCAMP et al on its own HD, and use NTFS... This will come in handy when doing a BDAV from a file such as HDV1080 that is larger than 4GB.
To do BDMV, you'll need SONIC DVD-IT PRO HD ($499) which I have yet to try...
Frustrating process, but kinda cool to figure it all out, especially when NOBODY in sales at any of these places seems to have a clue.
So there you go - must be possible
Sark

What do i need to burn blu-rays?

Hello everyone. I'm new to Final Cut Pro, and Macs in general, so please bare with me. I'm a film student, and recently purchased a Canon XH-A1s and a Mac Pro with Final Cut Pro 6 to jump start my video production business.
My only problem is that i only have the ability to produce HD video, so when it comes to distribution, DVD is really not an option. I've heard with an upgrade to Final Cut Pro 7 that you can finally burn Blu-Rays without a third party application, just wondering if that was true.
I was planning on upgrading to Final Cut Pro 7, and purchasing an external, USB Blu-Ray read/write drive. Should everything work ok if i go down that route?
Thanks everyone,
-Billy
Message was edited by: blakes2406

The Mac does not come with a Blu-ray burner. So you would be burning a Blu-ray compatible file to a standard DVD-5 or DVD-9. Neither of which are ideal for authoring Blu-ray content.
Do an exhaustive search online about Blu-ray authoring and disk creation. This is not something for the hobbyist video creator (and I say hobbyist in the sense that you're not creating thousands of copies for mass distribution, so no one take offense.)
Blu-ray is expensive and requires a lot of planning and prep to do it right. But you can't burn an official Blu-ray disc on a Mac as they stand. And, Compressor doesn't burn discs, it only creates files. DVD Studio Pro would be the app that would burn the Blu-ray disc, and DVDSP has not been upgraded since long before Blu-ray came on the scene.

Burning Blu-ray disks. Third party hardware needed?

I have read from earlier posts that it is not possible to burn Blu-ray© disks from DVDSP. Can third party hardware be purchased to burn such a disk having assembled the digital assets in DVDSP? Any recommendations?
Thanks in advance.
G5 Quad Desktop Mac OS X (10.4.8)

Thanks for your responses. I see that from DVD SP Late-Breaking news that'HD DVD projects authored by DVD SP 4.0.3 fully comply with the 1.0 version of he HD DVD specification...the new HD DVD standard. The disks will play on Apple DVD Player version 4.6.5 or later.
I haven't commited to the Blu-ray© player, just the Sony HD camcorder.
When the time comes, I will burn to a red laser disc per the Apple recommendation. And thanks for the Roxio link which makes it clear that a PC is needed for Blu-ray©
G5 Quad Desktop Mac OS X (10.4.8)

HOW LONG TO BURN BLU RAY VIA COMPRESSOR 3.5?

Does anybody know the ballpaerk figure as to how long a 115 minute FCP 7 project exported to self contained movie and brought into Compressor 3.5 to burn a blu ray disk on an external blu ray writer will take? Is Roxio Toast any faster? Thanks much for your help.

iamfrustrated wrote:
This is getting more interesting by the minute. I have now set the project up as two blu ray DVD's -each around 72 minutes. When I go to 'send to compressor' from fcp 7, if I select HD DVD 90 minutes (assume that is the correct method as there is no 'blu ray' option) and then set Job Action to Blu Ray, I get the message with that nice little yellow triangle warning stating: "Cannot create Blu Ray disc as no target that is either mpeg 2 video elementary stream or H.264 stream". The fcp project in compressor is dolby digital prof. 2.0 and HD H.264 6.75 mbps.
I'm obviously doing something wrong here(?)
The HD DVD presets create files that are usable in DVD Studio Pro for making HD DVD's - not for authoring Blu-ray discs.
Here's what you need to do:
Create a new preset from "H.264 for Blu-ray".
Leave the video format and frame rate set to automatic, but lower the bitrate down to 20 Mbps with a max of 25 Mbps.
Then add a Dolby Digital Audio track as a second target.
Under job action set to create blu-ray disc but save it to the hard drive rather than trying to burn directly. (I know this an annoying extra step but there's been issues reporting with burning Blu-ray/AVCHD discs over 10 minutes in length.)
This will get it onto a single disc and 20 Mbps h.264 will still look pretty good.

DVD Studio burning blu-ray

I cant find the thread dealing with this subject although I am sure many people must have raised this issue. I would like to know if Apple finally decided in its new DVD Studio version to add the possibility of authoring in HD and burning blu-rays discs?

As I said, what I want to know is if Apple's DVD Studio Pro will at last decided to offer the solution of burning the authoring made through this application into a Blu-Ray (rather than having to use another application much more simplified and rudimentary).
I know Steve Jobs gambled to fully suppport HD-DVD rather than Blu-Ray and he lost this gamble since HD-DVD is no longer a standard. So I am wondering if the reason why he is dragging his feet to implement Blu-Ray capabilities is that he does not like to loose and will do everything to prevent Apple from integrating the Blu-Ray standard in its applications...

Trying to burn Blu-ray on Power PC G5

Does anyone make a Blu-ray video authoring software program that does not require an Intel processor? I'm trying to use Roxio's Toast 10 with BD/HD Plug-in but is is not working.
I have a Dual 2 GHz PowerPC G5 running OSX 10.5.8 (Leopard) with 10 GB of Ram and Final Cut Studio 2 (Final Cut Pro 6.0.4)
My Blu-ray burner is a LaCie d2 Firewire drive.

My Toast 10 now works in burning Blu-ray video. I've learned from other posts that there was a problem when I updated to QuickTime 7.7 in that certain video file types were no longer recognized. Unfortunately you just can't install an earlier version over the newer version the traditional way.
I've learned however that there is a way to install an earlier version of QuickTime (in my case QT 7.6.4 without completely re-loading the Operating System software (Leopard for me).
There's a Shareware program called Pacifist which takes elements from the earlier QuickTime installer and replaces the newer versions problem files. The QuickTime version # still says your current version but the elements have changed. See this link for how to do this:
http://www.digitalrebellion.com/blog/posts/using_pacifist_to_downgrade_quicktime .html
After rebooting, the QuickTime Player (and more importantly Final Cut Pro) supported all the video files. Toast 10 still had a problem until I trashed the Toast plist and pref files in the User>Library>Preferences folder and then re-installed Toast 10.0.9. Now everything works!
I still want to buy a better Blu-ray authoring program because the menus in Toast are so basic.

I want to burn blu ray discs from FVPX, compatible mac burner.

I want to burn blu ray discs from FCPX projects. I note I should be able to but any thought on a mac compatible burner. Why is so difficult to find one??

I would recommend navigating to www.macsales.com, because they specialize in Macs they can point you to devices that should work with your computer. Please make sure you also have software for burning Bluray discs, i'd recommend Titanium Toast.

Has a stop marker any function when burning blu-ray discs with Premiere Elements 12?

Stop marker when burning blu-ray discs with Pre 12. Does it works?

Amiral
No.
This applies to Premiere Elements any version.
Stop markers placed on the Premiere Elements Timeline destined for burn to Blu-ray disc format on Blu-ray disc are not recognized at playback of that disc using the Blu-ray player.
If you need Blu-ray disc with stop markers, you can export your Premiere Elements Timeline content to an appropriate file type that will be compatible with a 3rd party software which will get the job done. I have heard that a software such as DVD Architect can do that, but I have not been there and done that.
Stop markers function at playback of DVD-VIDEO on DVD disc only. And, never place a stop marker at the end of the last item on that Timeline.
http://help.adobe.com/en_US/premiereelements/using/WS09e4b3c48f3a79fc19b622510385d4355c-7e 19.html
Please do not hesitate to ask if you need clarification on anything written.
Thank you.
ATR
Add On...I have found that the situation is the same for stop markers and AVCHD on DVD and Blu-ray disc format on Blu-ray disc.

Burning Blu-Ray: Sometimes successful / Sometimes not

Similar Messages

Maybe you are looking for