Burning cd help

ive been trying to burn a cd of recent purchases and i cant. its not that there are to many songs. i know the songs fit on there. sometimes it will tell me to insert a black cd and i do and it does nothing or it will say it will require more that 1 cd and i say ok and it stops or it will pop up with error 4880. i dont get it. i have the latest version of itunes. i used to be able to burn cds and now i cant....HELP!!!

Kyle.L wrote:
I was able to burn a CD using Windows Media PLayer and it was the same three disks that i used...
OK, then you have surely encountered one of the many burning bugs that is afflicting iTunes lately.
Since you have already tried the lower burn speed, other home remedies to try are: If you are using CD Text, turn it off. If you are trying to burn a long playlist across multiple audio CDs, split it into individual playlists that are each comfortably under 80 minutes. If you have not updated the drivers for your CD drive recently, do so.
If none of that helps, consider burning with another program on your computer, such as Nero or Windows Media Player, which in your case seems to be working fine.

Similar Messages

Error message while burning/ please help!!

I am getting an error message when I am trying to burn a dvd this is probably the 10th movie project I have made into a dvd, never had this problem. Here is the message:
There was an error during rendering/encoding of the menus/slideshows. The burning process has been cancelled.
Please help i need this dvd by 2pm tomorrow.

I know you said you have made slideshows before, but does this article have anything that applies to you?
http://support.apple.com/kb/TS2303
I hope this helps.

Having problems with burning - need help please!

when I try and burn a disk itunes says no recording
software found. Everytime I start up itunes it says the drivers associated with burning are missing. It ask me to
reinstall the software which I do and I have the same
problem. I have other burning software but cant burn any
itunes Ive purchased do to the format. Any help would be greatly appreciated.
The german note is:
Achtung
Die Registrierungseinträge für die iTunes Treiber zum Import und Brennen von CDs und DVDs fehlen. Diese kann Folge der Installation einer anderen Software zum Brennen von CDs sein. Bitte installieren sie iTunes erneut.
Could anybody please help me??

I need more information about your hardware configuration. Run the iTunes Help menu -> Run CD Diagnostics... command and post the results here.
I'm assuming that you're not running 64-bit windows.
It sounds like the driver didn't get installed. You could try doing a repair install on iTunes --
Windows Start menu -> Settings -> Control Panels -> Add or Remove Programs
Select iTunes, Select Change/Remove button, Select "Repair" radio button, click OK.
If that doesn't work, you might try downloading just the CD drivers from :
http://www.gearsoftware.com/support/drivers.cfm
Get the first link, not the second one that talks about gearsec compatibility.

Not Enough Free Disk Space to Burn - - Please HELP!!!

Hello -
I'm having a lot of trouble creating my iMovie and DVD. After several days of trying to delete applications and files off of my hard drive, I apparently still do not have enough free disk space to burn the DVD. This is very frustrating for me as I've created several movies/DVDs in the past and haven't had this much trouble. (I have deleted the old movies for more space.)
I have used Monolingual to delete unnecessary language files, and have deleted the iDVD plist as was suggested in other threads, however I still do not have enough free space.
Any additional suggestions would be VERY much appreciated! I tried to copy the iDVD file to my iDisk thinking maybe it would burn from there since I have almost 10GB available there, but again there wasn't enough space.
Thank you so much for your help!

Lindsay,
One of the problem with the Powerbook G4s is that most of them tend to have small - in today's term - hard drives. I have a couple of external Firewire drives from Iomega that I use with my Powerbook to fee as much free space on the internal hard drive as I can. You will have to do the same.
iDVD probably won't be able to use a project file on your iDisk.

Cd playback & burn quality HELP!

Someone help! When I play or burn a cd in itunes, the sound quality is horrible, with little skips and pops (sounds like it is on an old record player). But if I play & burn cd's on Windows Media Player, the quality is fine. Anyone know why or how I can fix this? lso, sometimes when burning I get an error code 4450. What is that? Any help is appreciated.

Here you go. Thanks for the quick response!
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Inc. Inspiron 1501
iTunes 7.0.2.16
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.1
LowerFilters: AFS2K (3.1.21.0), PXHELP20 (2.0.0.0), DRVMCDB (1.0.0.1), DLACDBHM (1.0.0.1),
UpperFilters: GEARAspiWDM (2.0.6.1),
Video Driver: ATI Radeon Xpress 1150 \ATI Radeon Xpress 1150
IDE\DiskTOSHIBAMK6034GSX_______________________AH101D_, Bus Type ATA, Bus Address [0,0]
IDE\CdRomTSSTcorpDVD+-RW_TS-L632D_______________DE03___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
D: TSSTcorp DVD+-RW TS-L632D, Rev DE03
Audio CD in drive.
Found 20 songs on CD, playing time 71:21 on Audio CD.
Track 1, start time 00:02:32
Track 2, start time 02:40:42
Track 3, start time 05:13:65
Track 4, start time 08:20:37
Track 5, start time 11:19:15
Track 6, start time 14:30:70
Track 7, start time 17:58:32
Track 8, start time 22:19:30
Track 9, start time 25:47:25
Track 10, start time 28:49:70
Track 11, start time 31:26:42
Track 12, start time 35:35:70
Track 13, start time 39:49:70
Track 14, start time 43:13:00
Track 15, start time 47:06:45
Track 16, start time 49:49:72
Track 17, start time 54:58:05
Track 18, start time 58:40:72
Track 19, start time 62:28:10
Track 20, start time 66:40:45
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 24.
The drive CDRW speeds are: 24.
The drive DVDR speeds are: 24.
The drive DVDRW speeds are: 24.
Writing CD text is turned on in the preferences. If you're having problems burning CDs, try turning this preference off.
The last failed audio CD burn had error code 4450(0x00001162). It happened on drive D: TSSTcorp DVD+-RW TS-L632D on CDR media at speed 20X.

I get error code 0x80020063 when attempting to burn discs, HELP!

I've been trying to burn photos on to a disc from my desktop and so far every one of them has been spit out with the error code 0x80020063. Then the disc is halfway burnt and unreadable. This is my third mac and I've never had this problem before!

See = https://discussions.apple.com/message/16648829#16648829
Hope it helps.

Burning discs, help! ?????

the only way i know how to burn discs is by creating a playlist in itunes and then selecting that playlist to burn and even then the disc is a music cd
im used to using nero burning rom on the pc, is there something similar to this already on macosx
basically im asking because its not always that iw ant to burn an audio cd on itunes; if i wanted to burn a data/mp3/vcd/dvd disc, how would i go about it?
thanks in advanced

http://www.roxio.com/enu/mac.html
Roxio Toast is a Mac versatile software package that let's you do disc burning of many different varieties, kind of like Nero on the PC.
One advantage of Toast is that this software supports many different types of optical drives that you may have added to or upgraded in your Mac, where as the Mac built-in software typically only supports selected drives that shipped in a Mac (only an issue for an older computer that might have shipped with a CD-ROM and a RW drive was added by the user) PatchBurn is a utility that can help add the native support to some drives, in the case of an upgrade drive that didn't originally ship in the Mac.
http://www.patchburn.de/
Built-in to the Mac OS Finder you can burn single session data discs, and you can also use Disk Utility to create a disc image and then burn to an optical disc. iTunes has a preference where you can burn mp3 discs instead of Audio format, but I think this only works when you have converted the songs into mp3 format first. There is a System Preference on what to do when you insert a blank disc, you can open Finder and drag and drop items to the disc which is a temporary "Burn Folder" which lets you build the list of files, then you click the little burn icon to start the burn when you are ready. You can create a Burn Folder and save it so you can burn multiple discs of the same stuff.
Also, the iLife applications support burning your muti-media to optical drives, i.e. select a group of pictures in iPhoto and you can burn a CD or DVD. iDVD also can create custom DVD's of your iMovie projects and iPhoto slideshows, etc.
Check out one of the "Missing Manual" books from your local library, that might help learn some of the Mac language and where to find things since you are new to Macs.
Try it out, and post back if you are able to get it working or need a more detailed walk through...

DVD Studio Pro burning/ building help

I am attempting to burn a project to DVD fro DVD Studio Pro. I keep getting an error message that build was not complete due to I/O error. I checked my drive to make sure that my firmaware was up to date, and it was. The file is only 3.8G and I am trying to burn to a 4.7GB disc. I am wondering if I made a mistake when importing the assets. My original media came from AVID Express Pro and I exported as a Quicktime Movie. Can anyone help???

Well, we would need to know more about your hardware configuration, but to me it sounds like a classic hardware problem... check all cables and connections, and if you have any way to run diagnostics on your system and/or burner, that might reveal the issue.
Best of luck!

Itunes 6.0 - if download is on playlist, it won't burn - Please help

Hi Everyone (and Toonz, perhaps we can continue where we left off in Dec)
Basically my problem is that I can't burn any purchased tracks from Itunes. I can burn uploaded stuff from my own cd collection, but not if it has a purchased track on the playlist.
It checks playlist, ticks the tracks then freezes/hangs and I have to control alt delete to get out of Itunes entirely.
So far I've updated firmware, tried it with firewall and security system off and pop ups off, tried both cd drives. Tried different burn speeds and cd makes.
What I have done is managed to burn it to data disc, but then of course I can't play it on anything other than the pc, so that's no use.
This all started when I had to re-load Itunes to version 6 after a pc crash. The previous version was fine.
I've updated to the very latest version of Itunes (6.0.2 I think) just the other day, but no joy.
cd diagnostics after a failed burn are:eveshamvale MS-7125
iTunes 6.0.2.23
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: ASAPIW2K (6.0.2.0), AFS2K (3.1.21.0), PFC (2.5.0.204), CDR4_XP (7.5.0.50),
UpperFilters: CDRDRV (6.0.0.0), GEARAspiWDM (2.0.4.3), Cdralw2k (7.5.0.50),
Video Driver: C.P. Technologies Inc. RADEON X700 PRO\C.P. Technologies Inc. RADEON X700 PRO
DOT4\Vid03f0&Pid_3e02&DOT4&STOREHPHI11, Bus Type USB
IDE\DiskWDCWD2000JD-00HBC0____________________08.02D08, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSONYCD-RW__CRX230EE____________________2YS3___, Bus Type ATA, Bus Address [3,0]
IDE\CdRomSONYDVD_RW_DW-D22A_____________________BYS2___, Bus Type ATA, Bus Address [2,0]
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: SONY DVD RW DW-D22A, Rev BYS2
Drive is empty.
E: SONY CD-RW CRX230EE, Rev 2YS3
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 12 16 24 32 40 48 52.
The drive CDRW speeds are: 12.
The last failed MP3 CD burn had error code -128(0xffffff80). It happened on drive D: SONY DVD RW DW-D22A on CDR media at speed 0X.
I personally feel that this has something to do with licenses but that's just a hunch.
Does anyone know how licenses can be renewed, or se-sent to my computer to authorise me to use the tracks (Media Player has a function that does this)?
I'm willing to try whatever people suggest if I haven't tried it already.
Jane

Janieburmy,
You can always deauthorize all your machines from your store account page — just log in and view your account settings and there's a button to deauth all your machines. Which just means for the other machines, it will ask you for your store ID / password the next time you play a purchased song.
So, let's try the filter experiment.
On the start menu, click on "run". in the space it provides enter "regedit" without the quotes. This will open the registry editor.
Find the heading HKEYLOCALMACHINE. Click on it.
Find the heading SYSTEM inside it. Click on it.
Find the heading CurrentControlSet. Click
Find the heading Control. Click
Find the heading Class. Click
Find the heading that begins {4D36E965- Click
Go up to the Registry menu and select "Export Registry File... command. Make sure the "Selected Branch" radio button is checked and save that off somewhere that you can find it.
Delete the key named LowerFilter.
Select the key named UpperFilter, right click, select "modify". Then edit the text in the dialog to just say "GEARAspiWDM" followed by hitting the return key, the return after the word is important.
Then reboot, and see what iTunes does.
To get the system back to its previous state. Run Regedit again and use the Registry menu -> Import Registry File... command and select the file that you saved off in the first section.
I'm particularly interested in getting rid of the "AFS2K" driver in the chain — that's a old driver from a company that hasn't existed in years.
To answer your last question, why am I doing this?... I'm paying off a karmic debt. And someday we'll start that Tequila for Toonz paypal account and then I'll be set.

Error 2380 when starting burn please help

This error has been driving me nuts for 4 months now. Is anyone else having the same problem.
Here is what the CD dianogtic says:
Microsoft Windows Server 2003 family, Professional Service Pack 1 (Build 3790)
System manufacturer System Product Name
iTunes 6.0.3.5
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
UpperFilters: InCDPass (4.3.12.0), incdrm (4.3.12.0), GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce 7800 GT\GeForce 7800 GT
IDE\DiskMaxtor7L300S0_________________________BANC1G10, Bus Type ATA, Bus Address [0,0]
IDE\CdRomLITE-ONDVDRW_SHW-1635S_________________YS0V___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomNEC_NR-7900A___________________________1.08___, Bus Type ATA, Bus Address [1,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
The last failed audio CD burn had error code -128(0xffffff80). It happened on drive on -128(0xffffff80) media at speed 0X.

try this...i had a 4000 burning error, and this fixed it...I went under My Computer, then right clicked on the cd drive that I used to burn, go to properties, went under the auto play tab, selected the action to perform button for each individual category(dvd, blank cd, music cd) selected the no action icon for each category. Then went to the recording tab and unselected the enable recording selection. Now I can burn every time! If this fixes it for anyone else let me know!
Jr

I have training dvd's I want to copy to my mac os can't find a copy or burn icon help

I have a mac os x and want to be able to burn or copy for viewing a trainind dvd but can't find burn or import button. tried opening in quick time but couldn't open.
in dvd player there is no evident icon or button to rip or burn.

If you are using Lion the user Library folder is hidden.
Finder > Hold down the option key and click Go on the menu bar. Then open Libary from the list.
So User Library > Application Support > iWork > Numbers > Templates > My Templates.
Finder in column mode is the easiest..

IDVD 4.01: Some menus/folders are BLANK after burn. HELP!

I have a eMac, G4, 1GHz, 512mb and up to this point, iDVD has worked flawless.
I'm working on a large project. Probably the largest I've ever done with iDVD. There are many pictures, several movies, a whole bunch of seperate folders, and everything has audio... The DVD previews perfect. Everything is the way I need/want it. However, the contents of some folders are blank (appearing black) after a burn. I'm stumped? I've tried recreating the folders, movies, images, audio in the affected areas. But, it's almost random! After some burns one folder will come out ok and a different one is affected. I'll fix one and the one I just fixed is blank! Any ideas? (I'm at witts end here)
I've set iDVD to the 'Quality' setting in the perfs so it rebuilds everything on every burn. I've deleted all assets several times before a burn.
Thanks in advance...
spyderman

Wow. Nobody had a soultion to this one...
I decided a drastic change was needed. I absolutly had to get this DVD created. I assumed that either there was a problem with OS X 10.2.X, iDVD 4.01 or a Firmware problem with my Superdrive. The Firmware update for the Superdrive required OS X 10.3.8 or greater. So, that's what I did... I upgraded to OS X 10.4.2 and iLife 5. After the 2hr install and updates were applied, I attempted a burn. IT WORKED! I fixed the problem with a $70 purchase on eBay. I'm a happy Mac user once again.

Installing External DVD Burner, please help!

I've been trying all day to install my new External DVD Drive; it's an LG GE20 that SAYS it's Mac compatible, yet comes with no usable installation software, only a disc for Windows. I hooked it up and powered it on, put in the Windows install disc and it reads, but I cannot install anything. I'm sure there's drivers I need to be able to use the drive, but I've been scouring the net for hours trying to find a way to install this burner and the software it has on the disc onto my Macbook, and I read that there can also be problems getting lightscribe to work. If someone can guide me through installing this drive and getting it to work, I would be very appreciative.

http://www.lge.com/us/support/product/support-product-profile.jsp?customerModelC ode=GE20LU10&matchedModelCode=1000007624&searchEngineModelCode=GE20LU10&initialT ab=documents&targetPage=support-product-profile
the LG doesn't list Mac OS X as a supported OS for the GE20LU. but I'd be surprised if it doesn't work. In the off chance it doesn't you may want to check out toast.
As for using Light Scribe on a mac: http://www.lightscribe.com/downloadSection/mac/index.aspx?id=813
Message was edited by: Sherman Campbell

Movie length and dual layer burning - please help!

I just posted this question in the iMovie forums but thought it might be more appropriate here:
Hi everyone,
I've just finished my first iMovie project, and the total movie length is 2hours, 31 minutes. I've noticed from a few other posts that people say the maximum movie length that iMovie can export or that will fit on a dvd is 120 minutes.
I do however have a dual layer dvd burner on my iMac - does this mean I will be able to export/share my iMovie project to iDVD and fit the whole movie on an 8gb dual layer disc? if so, could someone please give me some advice on the best way to go about doing it?
I'm relatively new to Macs and haven't burnt a dual layer dvd yet. I'm sure that I've burnt projects of this length before on a single layer dvd using Premiere Pro and Adobe Encore DVD, but I suppose iDVD must have its own length limitations on what can fit on a single layer disc.
Anyway I hope someone out there can answer my question,
thanks!

Welcome to the Discussions Art,
If you use System Profiler (Apple logo/About This Mac/More Info...) and see that the burner is supported like here:
http://docs.info.apple.com/article.html?artnum=301556
Then when you are in iDVD the Status window should look like shown here:
http://docs.info.apple.com/article.html?artnum=301557
You can make a 4 hr DVD if you set the encoder preference to Quality (limited to 2 hr if on Performance), your set!

Ken Burns Effect Help

When using the Ken Burns effect with iMovie HD to zoom in on a picture I would like to be able to hold the zoomed image for a few seconds. The only way I have found to do this is to import the same picture twice. The first uses the Ken Burns effect to zoom and with the second I try and match the zoom and position of the finish point of the first. There is always a little jump when it transitions from the first to the second. Anyone know a better way to do this?
G4 Mac OS X (10.4.3)

The trick is to use Option-drag to duplicate the Ken Burns clip you've made, then edit the duplicate clip to behave as you wish. The duplicate will begin with the same settings as the original ends, which prevents jumping.
More here:
http://discussions.apple.com/click.jspa?searchID=239705&messageID=961026
Karl

Burning cd help

Similar Messages

Maybe you are looking for