Burning cd-multiple podcasts no longer split?

With previous Itunes versions, I remember being able to burn cds with multiple podcasts on it. In such cases, if one full podcast and half of a second podcast could fit on a cd, itunes would record halfway through the show and continue the rest on the next cd.
Now it seems like, it will only copy what it can copy entirely. If only one full show can fit, then it'll push the second show to the next cd. Is there a way to change this? I'm eating through cds like crazy just to listen to podcasts.

Still not working but I have a little more information.
Rebuilding my iTunes library had no effect.
Rebuilding the preference file did have an effect:
The new preference file reset all the preferences (obviously) including where the itunes music folder is located. Forgetting to change the folder back to the external volume where all my music is kept, I tried downloading a podcast. It worked. I then tried remapping the itunes music folder to my actual music folder and it failed again, producing the same error I originally posted.
Okay, so there's an issue with my external drive. Well, perhaps, BUT, as I mentioned above, the drive appears to be working fine. I can read and write files to it, I can play music and podcasts off of it, and--here's the kicker--a different user account on the Mac, which shares the same external music volume is able to download podcasts to the drive.
So, there is a little more information, though I'm really not sure the next steps to take to troubleshoot this.
iMac G5 17 PPC 2GHz 2G RAM Mac OS X (10.4.8) Powerbook G4 1GHz 768K RAM

Similar Messages

  • Would like to put playlist on thumb drive rather then burning to multiple cd's, any suggestions?

    Getting annoyed burning to multiple cd's, would like to copy playlist to thumb drive instead. Any suggestions?

    I'd like to add this: I think I may have figured it out, but this seems a little strange. After I burned 209-230, my last CD burned tracks 227-241 (four songs repeated). Is iTunes trying to make sure all the CD's are full to their maximum capacity? (i.e. Let's say it burns tracks 41-61. Then it goes to burn 62-82, but 82 is too long. However, track 61 is shorter than track 82 and will fit—so it burns 61-81 instead.) I think this may be what it's doing...any comments?
    P.S. sorry if that was very confusing. I have a feeling it was.

  • Multiple podcast subscriptions?

    Is there any neat way of subscribing to multiple podcasts?
    It is a problem that if I am in, say, Music Store>Podcasts>Business>All, there is a huge list & I may be interested in 100 of these. The 'Subscribe' button per podcast then takes me to my own library to begin the download.
    The trouble is that is is very long-winded for the next one to navigate back to the required category, find my way down the list, & then try to remember which I have subscribed to when viewing the 'Master' list. It is a slow process for each podcast, & writing the 'subscribed' down as a list seems very counter-productive.
    BTW it is PC iTunes, if that makes a difference

    Hi. Yes it returns to the page, but at the head of the list. I can't tell from that list to which I am subscribed, & I have to try & remember what position I was in. This becomes an issue when I am subscribing to 40+ podcasts in the list.
    Maybe there is no answer & hopefully an Apple dev might pick up on it for a future issue?

  • Crashing when deleting multiple podcasts app

    Te app crashed on me three times when trying to delete multiple podcasts. Just putting it on here for apple to see and bug fix :)

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful.

  • Can we have multiple Podcasts with the same Mac Account?

    Hi all,
    Can we have multiple Podcasts with the same Mac Account?
    For example, I have a single .MAC account and create a website with multiple Podcast pages...or within iWeb I create multiple sites, and each has a podcast.
    Is there a problem?
    Thks
    Leo

    Its not possible for the same development object. Only 1 person can access an object at a time and if mutiple users modify an object new TASKs are created under the same TRANSPORT.
    Only after releasing the tr you can create a new tr on the same object.
    Message was edited by:
            Abhishek Jolly

  • Existing Podcast no longer showing up in Directory

    I need some help. I work for a church. Podcast has been set up for years. About 3 months ago, the podcast no longer shows up in the directory, so people that are not already subscribed cannot find it. But if you were already a subscriber, it is still being updated weekly. I have tried to re-submit the feed, it takes it, but then nothing. I have done the feed validator and it is a valid feed. Is there a way to get to a person that can help me?

    I am having the same problem. My podcast is original content. It is clean. It is updated. There is no reason for it to disappear.

  • Podcasts no longer appear under ipod device in I tunes library.  I can access podcasts on my ipod but I CANNOT access podcasts on I tunes library.  I have disconnected and reconnected.  I have restored my ipod.  I have checked for updates. What else?

    'Podcasts' under Ipod device disappeared in Itunes library.  I can't manage my podcasts on ipod via I tunes library.  I can access the podcasts on my ipod (5th generation), itself. I can access and manage music.   I can add more podcasts to ipod.  The podcast icon reappears with only the newly added podcasts.   When I disconnect ipod and reconnect ipod, 'podcasts' no longer appears under the device.  So I am unable to manage my podcasts on I tunes library which means I can't delete podcasts from I tunes library.  I can only add podcasts. I have disconnected and reconnected ipod.  I have checked for updates.  I have restored the ipod to it's original settings.  My next step will be to install and reinstall I tunes.  Any other suggestions would be appreciated.

    To be clear, the podcast icon disappeared under Ipod device in Itunes.  I can access and manage the podcasts in the itunes library.  I can't manage podcasts on my ipod via itunes (which means I can't delete podcasts from my ipod). I can access podcasts on my ipod, itself.

  • Podcasts no longer sync and remember position.  Any solutions?

    Since installing Yosemite on one imac (older) and buying a new imac retina (using Yosemite) my podcasts no longer sync between devices.  Before Yosemite, if I played a podcast on my iPhone as soon as I opened my imac/itunes the podcast was set at where I left off.  It was great.
    Now, it does not do this at all.  Is there some trick or a preference file to delete/start over or did they really disable this feature?
    Thanks.

    In your subject heading you say the Podcasts do not sync. Are you saying they don't play +because they have not synced?+
    If so, when you plug your iPod into your computer, check the settings on the Podcasts pane/tab. Are they still set the way you want them? Software upgrades have been know to cause these settings to be changed.
    Phil

  • Podcasts no longer "Auto Delete"

    Hello,
    Wasn't sure which forum was best for this but just wanted to voice my frustration with Itunes 7.7 and the fact that my podcasts no longer "Auto-Delete" after being played. I checked my settings for each podcast and they are still set to "AUto-Delete". If anyone has any suggestions, please respond.
    Thanks!

    The auto-delete functionality in iTunes refers to deleting the podcasts from your computer. The control for removing played podcasts from the device is on the podcasts tab available when the device is attached.
    Whether or not podcasts are auto-deleted from you computer is based on the podcasts settings in iTunes. The settings button is on the bottom of the podcasts page (next to the undelete button). In the popup window under "Settings for:", select "Podcast Defaults" to change to default for all podcasts, or a specific podcast that you want to behave differently from the default settings.
    When choosing "Podcast Defaults", the two selections at the bottom of the window will be unlocked. When choosing any single podcast, uncheck the "Use Defaults" checkbox to unlock these fields.
    Changing the selection "When new episodes are available:" will affect how many (zero, one, or all) podcasts to download.
    Changing the selection "Episodes to keep:" will affect which, if any, podcasts are auto-deleted.
    As to removing podcasts from the device, this changed for me with the most recent update to the iPod software. Podcasts are removed from the iPhone if they have been played, but they remain on the iPod until they have been deleted from iTunes. I have not experienced a case where a podcast persisted on the device after it was deleted from the computer. I am hopeful that Apple will fix this with the next iPod software update.

  • Podcasts no longer appearing on recently added playlish

    My podcasts used to automatically appear on the recently added playlist. then something happened and my itunes was cleared. I added all the songs etc back on to my ipod but now the podcasts no longer appeared on the recently added playlist like they used.
    It was handing when they appeared there and I was wondering if there was a way I could get them to reappear there?
    Any help would be gratefully recieved
    Clare x

    It ok i found a similar discussion and they had the prob solved!!
    Happy Days!!
    x

  • , I-tunes can no longer 'locate' my library , after a botched cut & paste attempt to back-up onto an external drive. Still syncing with i-Pod but playlists lost , podcasts no longer syncing, Can't play music .. how to restore back to original state .

    I-tunes can no longer 'locate' my library , after a botched cut & paste attempt to back-up onto an external drive.Cant play any music as it "can't find" the library  Still syncing with i-Pod but playlists lost , podcasts no longer syncing.   How to restore back to original state . I have tried re-installing  - with no change

    I do the same thing as you do...
    My music is on an external drive as to not use up gigabytes of storage that need not be used for media.
    There are a couple basic principles to iTunes that I believe you should know.
    1. iTunes is not a media storage program. It does not store your media "in iTunes". It simply is an organization tool for your media already on a hard disk.
    2. As iTunes is not a storage mechanism, it has no way to "know" whether or not the media that is listed is actually there. This is where the "design" of iTunes comes into play.
    I like to think of iTunes as a bread-crumb trail. The "music" in iTunes, isn't actually there. The bread crumb is the location on the external hard drive.
    If that bread crumb trail disappears (in this case the external drive you use). If said external drive is not plugged in, that bread crumb trail is not able to be followed. iTunes is "lost" and unable to find the media. The only way to remedy this is to place the media on your local drive.
    To address your issue of the library. If you hold down shift, you can select your library on your external drive. It will be a file with an .itl extension. The folder name will be your external drive.
    I go into edit > preferences > advanced and set my library to the correct location. Make sure you check the box "Copy to iTunes Folder when importing" (or whatever it says).
    You can't fix the issue of iTunes not seeing the media if your drive is unplugged unless you physically move the content to your OS HDD...Or any other HDD you use.

  • Why do podcasts no longer auto-delete in new v10.6.3.25 on Dell laptop Win7 despite menu settings

    Why do podcasts no longer auto-delete in new v10.6.3.25 on Dell laptop Win7 despite menu settings?
    tks

    Found the error and posted a blog post here: http://www.red-abstract.com/blog/2009/11/19/itunes-90-and-auto-deleting-podcasts .html
    The issue is that Apple put this behind another layer of configuration on the podcasts screen. Go to that screen and click "Settings." You will see there that you can configure the podcasts individually or set the defaults to remove played episodes. Only after setting this will iTunes honor to auto-delete.

  • Ipod playback of multiple podcasts

    Is there a way to listen to multiple podcasts consecutively--like listening to an album or the shuffle setting for songs, but in the podcast catagory?
    Thanks

    It seems this "fix" isn't published anywhere. I found the solution by accident for my ipod classic 6G.
    Go into your ipod Settings menu and turn Shuffle "Off". When shuffle is turned off then the podcasts will play continuously.
    If you want the podcasts to stop each time the end is reached then turn Shuffle "On".
    It's a pain. I have to turn shuffle on for music and then remember to turn it off before listening to podcasts.

  • As of today, many podcasts no longer available on Apple TV. Why?

    As of today, many podcasts no longer available on Apple TV. Why?

    The offering list does not look any different to me.  The 15 or so I have flagged are all still there.   You would need to contact the pod caster and ask why they stopped distributing their pod cast via iTunes.

  • Multiple Podcast Libraries. Which is the correct file in the correct place? See photos.

    I have multiple Podcast Libraries. Which Podcast file is in the correct place? I can combine the other Podcasts after knowing the correct path.
    "iTunes New" is my external hard drive housing iTunes.
    So is it:
    iTunes New > Podcasts
    iTunes New > iTunes > Podcasts
    iTunes New > iTunes > iTunes Music > Podcasts

    I would have thought this would be an easy solve for you Mac gurus.

Maybe you are looking for

  • Can i share my meetings/appointments with another iphone user?

    It would be fantastic if I could send my calender reminders and appointments to my family members from an iphone to another iphone.

  • Videos lost from iPhoto - still on drive somewhere?

    After a computer crash (freeze and hard reboot - wasn't me who did it!), I lost recently transferred videos.  The videos had  been transferred from my iPhone to iPhoto (then deleted from the phone).  The album in iPhoto with the videos still appears

  • No data available,data selection ended

    Hi Experts, In BI 7.4 quality system when I did the infopackage load for 0HR_PA_PD_1 (FULL) it is showing nodata available selection ended  in detail tab. But I have data in RSA3. when I saw the job in SM 37 in ECC Quality it is showing result of cus

  • Onclick display result in textbox

    Could anybody please help me with simple multiply code in coldfusion. I am trying to multiply price * quantity and get result total onclick Textfield. Below is the code I am using, but is not working: <SCRIPT language="JavaScript"> function checkValu

  • How to loop through xmldom.getNextSibling?

    Hello, I have been working with an example that Steve provided me with that uses xpath to pull the value of a specific node from an xml doc. This works fine as long as there is only one node, I would like to use getNextSibling to loop through all the